Eastern Times Technology MSEA Wireless Optical Mouse User Manual 2121 alt

Download:
Mirror Download [FCC.gov]
Document ID	615815
Application ID	wsvSI9RGEYSpoGEP8ojvYw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.46kB (105781 bits)
Date Submitted	2005-12-29 00:00:00
Date Available	2005-12-29 00:00:00
Creation Date	2005-12-28 08:41:31
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-12-28 08:41:31
Document Title	Microsoft Word - 2121 user manual.alt.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Tanja Lorber

Manual
power,please click the ID switch once
again.
The Steps of Battery Installation
1, Please prepare for two PCS new AAA
Welcome
Thank you for selecting this product! This
secons.If you want to take on the
3,Working distance: within 0.6-1.5 m
Chargeable Wireless Optical Mouse User
5. The optical mouse will not work freely
recharge batteries
on
smooth
desk
,glass,
any
mouse is one kind of newly developed
2, Press the battery cover at the location of
wireless RF mice in our company, and it uses
both side of mouse and pull the battery
the global-used frequency of 27MHz. The
cover rearward, and pull out the battery
of the battery before the receiver
comfortable and perfect shape is designed
cover(please refer to the following picture)
flashes, which shows that the power
according to somatology. With it, you can get
3, Please insert the batteries correctly
rid of the bondage of wires and enjoy your
according to the polarity marks of the
4,
Product Features
1.
The data transmitted over radio
immediately.
7.
You can place the receiver in the
low battery behind the wheel flashes, please
you hear “crack” sound which shows the
change batteries or charge them. The mouse
mouse when you want to carry the
battery cover is locked successfully.。
can use USB cable to charge, connect one
mouse on business, and press the
frequency 27MHz,and you enjoy fully
side of USB cable to the connector of the
free wireless space. It has 256 ID
board, and the other side to USB connector
switch of ID for a long time so as to
switch off the power.
before the mouse, thus it can successfully
Caution
Any changes or modifications not
many mice being used at the same
charge the battery. It can charge while you use
expressly approved by the party
time.
the mouse. It is full within about 3-4 hours, and
responsible for compliance could
then unplugs the connector to stop the charge.
void the user's authority to operate
Press here to push
battery cover
insert 2 PCS
AAA battery
2. With hidden inside receiver, be able
when the degree of discharge is different.
Double functions of automatically
saving-power sleeping and
low battery
LED
shut by hand, battery life prolonged.
With charge and regular circuit, it can
charge connect
use the attached retraceable cable to
charge for the mouse. Even if there is
no battery in the mouse, you can use
the mouse directly(But please don’t
pull out the receiver). Thus it resolves
the problem of lack the battery.
Systems Compatibility
IBM PC & its compatible computer and
Windows Me/2000/XP
Build-in mini receiver
As below picture, pressing the receiver-out
button, and the receiver can spring out
Receiver Installation
1, please use extended cable, and put the
receiver and transmitter on one desktop,
in this way, you may have higher working
efficiency.
2, If you use PS/2 connector, please use the
USB to PS/2 adaptor and connect with the
connector before your computer start-up.
3, For laptop, you may connect the receiver
directly with the USB connector.
Attention Please
1.
Please don’t make the mouse far
away from the receiver in order to
2.
You’d better use the mouse on the
work more smoothly.
automatically. If you push the receiver back
to the transmitter, power will be cut down
automatically.
Step of data connection
white desk, in this way the batteries
1, Please move the mouse near to the
can be used longer time. Please
remove the batteries if the mouse will
receiver
Push Reciver
the equipment.
Please note that the time of charge may vary
to shut off the power automatically.
4.
is nearly finished. Please change the
proper-sized new battery or charge it
Charge Function
Pull the battery covers forward, when
code, there is no interference even
3.
6. When you move the mouse, if the light
When using mouse, if the red led of the
battery grooves.
beautiful life from the high technology.
reflecting surface, 3D mouse pad.
ID connect
2, Press the ID button of receiver top by
not be used for a long time or if you
hand ,the red LED beside ID button
travel outside.
3. This mouse with save power sleeping
starts to flash slowly. Press the ID
functions, please press any key or
button of mouse bottom with some
scroll the wheel to wake up the mouse
hard and acuate object within 10
seconds, the receiver light will flash
when it is sleeping.
4.
If you want to take off the mouse
very fast, a few seconds later it will be
power,please continue to press the ID
stopped. You may start to use it.
switch of the mouse bottom over 3
Note
Note: This device complies with Part 15 of
the FCC Rules.
Operation is subject to the following
two conditions:
(1) This device may not cause
harmful interference, and
(2) This device must accept any
interference
received,
including interference that
may
cause
undesired
operation.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause
harmful
interference
to
radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the
receiving antenna.
* Increase the separation between
the equipment and receiver.
* Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
Consult the dealer or an
experienced radio/TV technician
for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6cf8e2f5-959c-4b1a-a282-261d85831c7b
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:12:28 08:41:31+01:00
Create Date                     : 2005:12:28 08:41:31+01:00
Document ID                     : uuid:b45167e9-fa44-4786-8c71-156c340af980
Format                          : application/pdf
Title                           : Microsoft Word - 2121 user manual.alt.doc
Creator                         : Tanja Lorber
Author                          : Tanja Lorber

EXIF Metadata provided by EXIF.tools