Eastman Kodak 81507E2537 8150 DryView Laser Imager Low Power Transmitter User Manual 7

Eastman Kodak Company 8150 DryView Laser Imager Low Power Transmitter 7

Contents

user guide 1

Download: Eastman Kodak 81507E2537 8150 DryView Laser Imager Low Power Transmitter User Manual 7
Mirror Download [FCC.gov]Eastman Kodak 81507E2537 8150 DryView Laser Imager Low Power Transmitter User Manual 7
Document ID484575
Application IDDFDKtk0DlhCdlnjsgA725g==
Document Descriptionuser guide 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize226.54kB (2831727 bits)
Date Submitted2004-11-02 00:00:00
Date Available2004-11-02 00:00:00
Creation Date2004-10-27 14:42:20
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2004-10-27 14:50:29
Document TitleMicrosoft Word - Document7
Document CreatorPScript5.dll Version 5.2
Document Author: jmurphy

Kodak DryView
8150 Laser Imager
User Guide
Eastman Kodak Company
343 State Street
Rochester, NY 14650
© Eastman Kodak Company, 2004
Kodak and DryView are trademarks of Eastman Kodak Company.
7F3319
Catalog number 1779545
Rev. A
Warranty and Limitation of
Liability
Important Notice to Purchaser:
Kodak warrants that Kodak hardware products will be free from defects in
parts, materials and manufacture for a period of one (1) year from date of
installation. For defects occurring during the warranty period and about
which Kodak has received notice during the warranty period, Kodak will
provide Customer with free replacement parts and labor to replace
warranty-covered items.
THIS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT
WARRANTIES, EXPRESS AND IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE AND THOSE ARISING FROM A COURSE OF
DEALING OR USAGE OF TRADE. The express warranty does not apply to
the following: expendable parts; defects or damage due to neglect, misuse,
operator error, improper installation or alteration of Kodak hardware
products or operation of Kodak hardware products out of specification.
EXCEPT FOR THE EXCLUSIVE REMEDY STATED ABOVE, KODAK IS
NOT LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, HOWEVER OCCURRING AND
REGARDLESS OF THE LEGAL THEORY ASSERTED, INCLUDING
NEGLIGENCE AND STRICT LIABILITY. Kodak shall in no event be
liable for any of the following:
• Performance or non-performance of any network utilized by the
Customer.
• Performance or non-performance of any third party equipment or
software.
• Impact of any Kodak product upon a network or third party equipment
or software.
• Malicious software infections caused by others.
Virus Policy: In accordance with the HI Digital Solutions Virus Policy,
document 3E4111, Kodak’s time to install patches and other changes to
our products, toward cure of vulnerabilities to and effects of malicious
September 30, 2004
7F3319
software attacks, and additional professional services to assist customers to
eliminate attack consequences and/or harden their information technology
infrastructure against future attacks, is billable unless a clear and specific
contractual agreement states otherwise.
End User License Agreement (EULA)
EASTMAN KODAK
COMPANY Health Imaging
Software End User License
Agreement
Read the following terms and conditions carefully before using
this Software. Use of this Software indicates your acceptance of
these terms and conditions. If you do not agree with them, you
should promptly return the package in its entirety for a full
refund.
License
Grant of License. Subject to payment of any fees set forth in any related
Quotation or Invoice, Eastman Kodak Company ("Kodak") grants to
Customer a nonexclusive license to use one copy of the software on the
equipment (the "Software"). Kodak represents that it has title to or has the
right to license the Software. Customer agrees to use the Software only in
conjunction with the normal operation of the equipment, but not to use any
of the diagnostic software included with the Software to perform
maintenance service or for any other purpose without entering into a
separate license agreement with Kodak. Customer may not transfer the
Software, or any of their rights in the Software, to any other party without
the prior written consent of Kodak. The term Software as used in this
Agreement does not include, and this license does not apply to, any
Microsoft operating system software provided with the equipment. Any
Microsoft operating system software provided with the equipment is
governed by a separate software end user license agreement.
Improved or Modified Versions. This license also applies to any improved
or modified versions of the Software supplied to the Customer by Kodak
during the term of this Agreement.
Copying and Nondisclosure. Nothing in this Agreement will be deemed to
grant the Customer any proprietary rights in the computer program or any
other work embodied in the Software. Customer may not copy or alter, and
must take reasonable care to ensure that others do not copy or alter, the
Software, in whole or in part, in any media for any purpose, except that
Customer may make a copy as an essential step in the use of the Software
with their CPU. To every copy (whether in whole or in part) made by the
7F3319
September 30, 2004
Customer for the purposes stated above, the Customer must affix the same
copyright or other proprietary rights notice as was originally affixed to the
Software when delivered by Kodak. Customer may not otherwise reverse
engineer, decompile, or otherwise derive the source code for the Software
program.
Copyright. The Software is owned by Kodak or its suppliers and protected
by copyright laws and international treaties. You may not copy the Software
other than as expressly provided in this license. You may not reverse
engineer, decompile, or disassemble the Software. If this Software is used
within a country of the European Union, nothing in this Agreement shall be
construed as restricting any rights available under the European
Community Software Directive (91/250/EEC).
Term and Termination. This Software license will remain in effect for as
long as the Customer rightfully retains possession of the Software as
delivered by Kodak. However, this license will terminate immediately (i) if
the Customer transfers or modifies the Software except as provided under
this Agreement, (ii) upon an uncured default by the Customer of this
Agreement, or (iii) if the Customer becomes insolvent, makes an
arrangement for the benefit of creditors, or becomes subject to bankruptcy
proceedings. Within thirty (30) days after any expiration or termination of
this license, in whole or in part, the Customer agrees to deliver to Kodak all
copies of the Software or media (whether in whole or in part) in the
Customer's possession, or as to any copy not in the Customer's possession,
Customer agrees to certify in writing that the copy is either lost or has been
destroyed.
Software Upgrades. Enhancements and/or upgrades will be made available
to the Customer at a price not greater than the said item's list price and
may or may not be discounted according to Kodak's pricing structure at the
time of purchase.
Limited Warranty
September 30, 2004
For a period of one year from and after installation of Software, Kodak
warrants that the Software will substantially conform to Kodak's
specifications and that the media on which the software is furnished will be
free from defects in materials and workmanship under normal use.
Kodak's sole obligation under this warranty will be limited to using
reasonable efforts to ensure such conformity and to supply Customer with a
corrected version of the Software as soon as practical after Customer has
notified Kodak of any non-conformity. Kodak does not warrant that: (i)
7F3319
operation of any of the Software will be uninterrupted or error free, or (ii)
functions contained in the Software will operate in the combinations which
may be selected for use by, or meet Customer's requirements. This
warranty will be void if the Software is modified without the written consent
of Kodak.
Subject to any applicable legislation which prohibits the following
exclusions, KODAK MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
states and countries, including Australia, do not allow the exclusion of
implied warranties, or have legislation that imposes certain statutory
warranties that cannot be excluded, so the above exclusion may not apply
to you. This warranty gives you specific legal rights and you may also have
other rights.
Limitation of Remedies
The remedies set forth above are Kodak's only obligation under the
warranty. IN NO EVENT WILL KODAK OR ITS SUPPLIERS OR DEALERS BE
LIABLE TO YOU FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING ANY LOST REVENUES OR PROFITS, DOWNTIME COSTS, COST
OF SUBSTITUTE EQUIPMENT OR SOFTWARE OR OTHER DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states and
countries, including Australia, do not allow the limitation or exclusion of
liability for incidental or consequential damages, or have legislation which
restricts the limitation or exclusion of liability, so the above limitation may
not apply to you.
General
If the Software was purchased in the United States, this Agreement is
governed by the laws of the State of New York. If purchased outside the
United States, this Agreement is governed by the laws of the country in
which it was purchased.
U.S. Government Restricted The SOFTWARE and documentation are provided with RESTRICTED
Rights
RIGHTS. Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subdivision (c)(1)(ii) of The Rights in Technical
Data and Computer Software clause DFAR 252.227-7013 or such other
applicable government or agency regulation providing equivalent
protection. Contractor / manufacturer is Eastman Kodak Company, 343
7F3319
September 30, 2004
State Street, Rochester, New York, 14650.
END-USER LICENSE
AGREEMENT FOR
MICROSOFT DESKTOP
OPERATING SYSTEMS
IMPORTANT-READ CAREFULLY: THIS END-USER LICENSE AGREEMENT
("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN
INDIVIDUAL OR A SINGLE ENTITY) AND THE MANUFACTURER
("MANUFACTURER") OF THE COMPUTER SYSTEM OR COMPUTER SYSTEM
COMPONENT ("HARDWARE") WITH WHICH YOU ACQUIRED THE
MICROSOFT SOFTWARE PRODUCT(S) IDENTIFIED ABOVE ("SOFTWARE
PRODUCT" OR "SOFTWARE"). IF THE SOFTWARE PRODUCT IS NOT
ACCOMPANIED BY NEW HARDWARE, YOU MAY NOT USE OR COPY THE
SOFTWARE PRODUCT. THE SOFTWARE PRODUCT INCLUDES COMPUTER
SOFTWARE, THE ASSOCIATED MEDIA, ANY PRINTED MATERIALS, AND ANY
"ONLINE" OR ELECTRONIC DOCUMENTATION. THIS EULA IS VALID AND
GRANTS THE END-USER LICENSE RIGHTS ONLY IF THE SOFTWARE
PRODUCT IS GENUINE AND A GENUINE CERTIFICATE OF AUTHENTICITY
FOR THE PRODUCT SOFTWARE IS PROVIDED WITH THE SOFTWARE
PRODUCT. ANY SOFTWARE PROVIDED ALONG WITH THE SOFTWARE
PRODUCT THAT IS ASSOCIATED WITH A SEPARATE END-USER LICENSE
AGREEMENT IS LICENSED TO YOU UNDER THE TERMS OF THAT LICENSE
AGREEMENT. BY INSTALLING, COPYING, DOWNLOADING, ACCESSING OR
OTHERWISE USING THE SOFTWARE PRODUCT, YOU AGREE TO BE BOUND
BY THE TERMS OF THIS EULA. IF YOU DO NOT AGREE TO THE TERMS OF
THIS EULA, MANUFACTURER AND MICROSOFT LICENSING, INC. ("MS")
ARE UNWILLING TO LICENSE THE SOFTWARE PRODUCT TO YOU. IN SUCH
EVENT, YOU MAY NOT USE OR COPY THE SOFTWARE PRODUCT, AND YOU
SHOULD PROMPTLY CONTACT MANUFACTURER FOR INSTRUCTIONS ON
RETURN OF THE UNUSED PRODUCT(S) IN ACCORDANCE WITH
MANUFACTURER'S RETURN POLICIES.
SOFTWARE PRODUCT
LICENSE
The SOFTWARE PRODUCT is protected by copyright laws and international
copyright treaties, as well as other intellectual property laws and treaties.
The SOFTWARE PRODUCT is licensed, not sold. The term "COMPUTER" as
used herein shall mean the HARDWARE, if the HARDWARE is a single
computer system, or shall mean the computer system with which the
HARDWARE operates, if the HARDWARE is a computer system component.
1. GRANT OF LICENSE. This EULA grants you the following rights:
– Software Installation and Use. You may only install, use, access,
display and run one (1) copy of the SOFTWARE PRODUCT on the
September 30, 2004
7F3319
COMPUTER.
– Storage/Network Use. The SOFTWARE PRODUCT may not be
installed, accessed, displayed, run, shared or used concurrently on
or from different computers, including a workstation, terminal or
other digital electronic device ("Devices"). Notwithstanding the
foregoing and except as otherwise provided below, any number of
Devices, may access or otherwise utilize the file and print services
and internet information services of the SOFTWARE PRODUCT, if
included.
If the SOFTWARE PRODUCT is NT Workstation 4, Windows 95,
Windows 98, or Windows 2000, you may use the SOFTWARE
PRODUCT on a single COMPUTER as interactive workstation
software, but not as server software. However, you may permit a
maximum of ten (10) Devices to connect to the COMPUTER to
access and use services of the SOFTWARE PRODUCT, such as file
and print services and internet information services. The
ten-connection maximum includes any indirect connections made
through other software or hardware which pools or aggregates
connections.
– Limitation on Software Programs Used on the Device. If the
SOFTWARE PRODUCT is NT Workstation, Windows 95, Windows 98,
or Windows 2000, the combination of software programs you use
on the COMPUTER shall address not more than two (2) general
office automation or consumer computing functions. Such
functions include, but are not limited to: e-mail, word processing,
spreadsheets, database, network browsing, scheduling, and
personal finance.
– Back-up Copy. If Manufacturer has not included a back-up copy of
the SOFTWARE PRODUCT with the COMPUTER, you may make a
single back-up copy of the SOFTWARE PRODUCT. You may use the
back-up copy solely for archival purposes.
Back-up Utility. If the SOFTWARE PRODUCT includes a Microsoft
back-up utility, you may use the utility to make the single back-up
copy. After the single back-up copy is made, the backup utility will
be permanently disabled. Except as expressly provided in this EULA,
you may not otherwise make copies of the SOFTWARE PRODUCT,
including the printed materials accompanying the SOFTWARE.
7F3319
September 30, 2004
– Reservation of Rights. Manufacturer, MS and its suppliers
(including Microsoft Corporation) reserve all rights not expressly
granted to you in this EULA.
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS:
– Windows 2000. If the SOFTWARE PRODUCT is Windows 2000, it
may not be used by more than two (2) processors on the
COMPUTER unless a higher number of processors is indicated on
the Certificate of Authenticity that accompanies the SOFTWARE
PRODUCT.
– Multiple Processor Version Selection. The CD or diskette(s) on
which the SOFTWARE PRODUCT resides may contain several copies
of the SOFTWARE PRODUCT, each of which is compatible with a
different microprocessor architecture, such as the x86 architecture
or various RISC architectures ("Processor Version(s)"). You may
install and use only one copy of one Processor Version of the
SOFTWARE PRODUCT on the COMPUTER.
– Language Version Selection. Manufacturer may have elected to
provide you with a selection of language versions of the SOFTWARE
PRODUCT. In such event, you are licensed to use only one of the
language versions provided. As part of the setup process for the
SOFTWARE PRODUCT you will be given a one-time option to select a
language version. Upon selection, the language version selected by
you will be set up on the COMPUTER, and the language version(s)
not selected by you will be automatically and permanently deleted
from the hard disk of the COMPUTER.
– Operating System Selection. Manufacturer may have elected to
provide you with a selection of Microsoft operating system software
for the COMPUTER. If the SOFTWARE PRODUCT includes more than
one (1) Microsoft operating system ("Microsoft OS"), you are
licensed to use only one of the Microsoft OS selections provided. As
part of the setup process for the SOFTWARE you will be given a
one-time option to select one (1) Microsoft OS. Upon selection, the
one Microsoft OS selected by you will be set up on the COMPUTER,
and the other Microsoft OS(s) not selected by you will be
automatically and permanently deleted from the hard disk of the
COMPUTER.
– Additional Software. Any SOFTWARE PRODUCT provided to you by
September 30, 2004
7F3319
–
–
–
–
–
–
–
–
Manufacturer, MS or Microsoft Corporation which updates or
supplements the original SOFTWARE PRODUCT is governed by this
EULA unless alternative terms are provided with such updates or
supplements.
Limitations on Reverse Engineering, Decompilation and
Disassembly. You may not reverse engineer, decompile, or
disassemble the SOFTWARE PRODUCT, except and only to the extent
that such activity is expressly permitted by applicable law
notwithstanding this limitation.
Separation of Components. The SOFTWARE PRODUCT is licensed as
a single product. Its component parts may not be separated for use
on more than one computer.
Single COMPUTER. The SOFTWARE PRODUCT is licensed with the
HARDWARE as a single integrated product. The SOFTWARE
PRODUCT may only be used with the HARDWARE as set forth in this
EULA.
Single EULA. The package for the SOFTWARE PRODUCT may contain
multiple versions of this EULA, such as multiple translations and/or
multiple media versions (e.g., in the user documentation and in the
software). In this case, you are only licensed to use one (1) copy of
the SOFTWARE PRODUCT.
Rental. You may not rent, lease or lend the SOFTWARE PRODUCT to
another user.
Software Product Transfer. You may permanently transfer all of your
rights under this EULA only as part of a permanent sale or transfer
of the HARDWARE, provided you retain no copies, you transfer all of
the SOFTWARE PRODUCT (including all component parts, the media
and printed materials, any upgrades, this EULA and, if applicable,
the Certificate(s) of Authenticity), and the recipient agrees to the
terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any
transfer must also include all prior versions of the SOFTWARE
PRODUCT.
Termination. Without prejudice to any other rights, Manufacturer or
MS may cancel this EULA if you do not abide by the terms and
conditions contained herein. In such event, you must destroy all
copies of the SOFTWARE PRODUCT and all of its component parts.
Trademarks. This EULA does not grant you any rights in connection
7F3319
September 30, 2004
with any trademarks or service marks of Manufacturer, MS or its
suppliers (including Microsoft Corporation).
– Application Sharing. The SOFTWARE PRODUCT may contain
Microsoft NetMeeting, a product that enables applications to be
shared between two or more computers, even if an application is
installed on only one of the computers. You may use this technology
with all Microsoft application products for multi-party conferences.
For non-Microsoft applications, you should consult the
accompanying license agreement or contact the licensor to
determine whether application sharing is permitted by the licensor.
3. UPGRADES. If the SOFTWARE PRODUCT is labeled as an upgrade, you
must be properly licensed to use a product identified by
Manufacturer, MS or Microsoft Corporation as being eligible for the
upgrade in order to use the SOFTWARE PRODUCT ("Eligible
Product"). For the purpose of upgrade products only, "HARDWARE"
shall mean the computer system or computer system component with
which you received the Eligible Product. A SOFTWARE PRODUCT
labeled as an upgrade replaces and/or supplements the Eligible
Product which came with the HARDWARE. After upgrading, you may
no longer use the SOFTWARE PRODUCT that formed the basis for your
upgrade eligibility. You may use the resulting upgraded product only
in accordance with the terms of this EULA and only with the
HARDWARE. If the SOFTWARE PRODUCT is an upgrade of a
component of a package of software programs that you licensed as a
single product, the SOFTWARE PRODUCT may be used and transferred
only as part of that single product package and may not be separated
for use on more than one computer.
4. COPYRIGHT. All title and intellectual property rights in and to the
SOFTWARE PRODUCT (including but not limited to any images,
photographs, animations, video, audio, music, text and "applets,"
incorporated into the SOFTWARE PRODUCT), the accompanying
printed materials, and any copies of the SOFTWARE PRODUCT, are
owned by MS or its suppliers (including Microsoft Corporation). You
may not copy the printed materials accompanying the SOFTWARE
PRODUCT. All title and intellectual property rights in and to the
content which may be accessed through use of the SOFTWARE
PRODUCT is the property of the respective content owner and may be
protected by applicable copyright or other intellectual property laws
September 30, 2004
7F3319
5.
6.
7.
8.
10
and treaties. This EULA grants you no rights to use such content. All
rights not expressly granted under this EULA are reserved by MS and
its suppliers (including Microsoft Corporation).
DUAL-MEDIA SOFTWARE PRODUCT. You may receive the SOFTWARE
PRODUCT in more than one medium. Regardless of the type or size of
medium you receive, you may use only one medium that is
appropriate for the COMPUTER. You may not use or install the other
medium on another computer. You may not loan, rent, lease, lend or
otherwise transfer the other medium to another user, except as part of
the permanent transfer (as provided above) of the SOFTWARE
PRODUCT.
LEASED HARDWARE. In the event that you receive the HARDWARE
under the terms of a lease from Manufacturer or Manufacturer's
third-party representative, the following additional terms shall apply:
(i) you may not transfer the SOFTWARE PRODUCT to another user as
part of the transfer of the HARDWARE, whether or not the SOFTWARE
PRODUCT transferred with the HARDWARE is otherwise allowed in
this EULA; (ii) your rights with respect to any SOFTWARE PRODUCT
upgrades shall be as determined by the lease you signed for the
HARDWARE; and (iii) you may not use the SOFTWARE PRODUCT after
your lease terminates, unless you purchase the HARDWARE from
Manufacturer.
PRODUCT SUPPORT. PRODUCT SUPPORT FOR THE SOFTWARE
PRODUCT IS NOT PROVIDED BY MICROSOFT, MICROSOFT
CORPORATION, OR THEIR AFFILIATES OR SUBSIDIARIES. FOR
PRODUCT SUPPORT, PLEASE REFER TO MANUFACTURER'S SUPPORT
NUMBER PROVIDED IN THE DOCUMENTATION FOR THE HARDWARE.
SHOULD YOU HAVE ANY QUESTIONS CONCERNING THIS EULA, OR IF
YOU DESIRE TO CONTACT MANUFACTURER FOR ANY OTHER
REASON, PLEASE REFER TO THE ADDRESS PROVIDED IN THE
DOCUMENTATION FOR THE HARDWARE.
EXPORT RESTRICTIONS. If this EULA is not labeled and the SOFTWARE
PRODUCT is not identified as "North America Only Version" above, on
the Product Identification Card, or on the SOFTWARE PRODUCT
packaging or other written materials, then the following terms apply:
You agree that you will not export or re-export the SOFTWARE
PRODUCT (or portions thereof) to any country, person or entity
subject to U.S. export restrictions. You specifically agree not to export
7F3319
September 30, 2004
or re-export the SOFTWARE PRODUCT (or portions thereof): (i) to
any country subject to a U.S. embargo or trade restriction; (ii) to any
person or entity who you know or have reason to know will utilize the
SOFTWARE PRODUCT (or portions thereof) in the design,
development or production of nuclear, chemical or biological
weapons; or (iii) to any person or entity who has been denied export
privileges by the U.S. government. For additional information see
.
If SOFTWARE PRODUCT is labeled "North America Only Version"
above, on the Product Identification Card, or on the SOFTWARE
PRODUCT packaging or other written materials, then the following
applies: The SOFTWARE PRODUCT contains strong encryption and
cannot be exported outside of the United States (including Puerto
Rico, Guam and all other territories, dependencies and possessions of
the United States) or Canada without a U.S. Commerce Department
export license or an applicable license exception. You agree that you
will not directly or indirectly export or re-export the SOFTWARE
PRODUCT (or portions thereof), other than to Canada, without first
obtaining an export license or determining that a license exception is
applicable. For additional information see
http://www.microsoft.com/exporting/.
9. NOTE ON JAVA SUPPORT. THE SOFTWARE PRODUCT MAY CONTAIN
SUPPORT FOR PROGRAMS WRITTEN IN JAVA. JAVA TECHNOLOGY IS
NOT FAULT TOLERANT AND IS NOT DESIGNED, MANUFACTURED, OR
INTENDED FOR USE OR RESALE AS ON-LINE CONTROL EQUIPMENT
IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE
PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR
FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS,
AIR TRAFFIC CONTROL, DIRECT LIFE SUPPORT MACHINES, OR
WEAPONS SYSTEMS, IN WHICH THE FAILURE OF JAVA TECHNOLOGY
COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE
PHYSICAL OR ENVIRONMENTAL DAMAGE. Sun Microsystems, Inc. has
contractually obligated Microsoft to make this disclaimer.
FOR THE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING
TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO THE
WARRANTIES INCLUDED BELOW OR PROVIDED WITH THE SOFTWARE
PRODUCT PRINTED MATERIALS.
September 30, 2004
7F3319
11
WARRANTY AND SPECIAL
PROVISIONS FOR
AUSTRALIA, NEW ZEALAND
OR PAPUA NEW GUINEA EXPRESS LIMITED
WARRANTY
12
CONSUMER RIGHTS. CONSUMERS MAY HAVE THE BENEFIT OF CERTAIN
RIGHTS OR REMEDIES PURSUANT TO THE TRADE PRACTICES ACT AND
SIMILAR STATE AND TERRITORY LAWS IN AUSTRALIA OR THE CONSUMER
GUARANTEES ACT IN NEW ZEALAND, IN RESPECT OF WHICH CERTAIN
LIABILITY MAY NOT BE EXCLUDED.
LIMITED EXPRESS WARRANTY. Manufacturer warrants that: (a) the
SOFTWARE will perform substantially in accordance with the accompanying
Product Manual(s) for a period of 90 days from the date of receipt; and
(b) any Microsoft hardware accompanying SOFTWARE will be free from
defects in materials and workmanship under normal use and service for a
period of 1 year from the date of receipt.
CUSTOMER REMEDIES. To the maximum extent permitted under
applicable law, Manufacturer's and its supplier's entire liability and your
exclusive remedy under the express warranty is, at Manufacturer's option,
either (a) return of the price paid; or (b) repair or replacement of the
SOFTWARE or Microsoft hardware which does not meet the warranty and
which is returned to Manufacturer with a copy of your receipt. The
warranty is void if failure of the SOFTWARE or Microsoft hardware has
resulted from accident, abuse or misapplication. Any replacement
SOFTWARE and/or Microsoft hardware will be warranted for the remainder
of the original warranty period or 30 days, whichever is longer.
LIMITATION OF LIABILITY. To the maximum extent permitted by applicable
law, any conditions or warranties imposed or implied by law are hereby
excluded. Consumers may nevertheless have the benefit of certain rights or
remedies pursuant to the Trade Practices Act and similar state and territory
laws in Australia or the Consumer Guarantees Act in New Zealand, in
respect of which liability may not be excluded. Insofar as such liability may
not be excluded, then to the maximum extent permitted by law, such
liability is limited, at the exclusive option of Manufacturer, to either (a)
replacement of the SOFTWARE (and any accompanying hardware
supplied); or (b) correction of defects in the SOFTWARE; or (c) payment of
the cost of having defects in the SOFTWARE (and any accompanying
hardware supplied).
EXCLUSION OF LIABILITY/DAMAGES. THE FOLLOWING IS WITHOUT
PREJUDICE TO ANY RIGHTS YOU MAY HAVE AT LAW WHICH CANNOT
LEGALLY BE EXCLUDED OR RESTRICTED. YOU ACKNOWLEDGE THAT NO
PROMISE, REPRESENTATION, WARRANTY OR UNDERTAKING HAS BEEN
MADE OR GIVEN BY MANUFACTURER AND/OR MICROSOFT CORPORATION
7F3319
September 30, 2004
(OR RELATED COMPANY OF EITHER) TO ANY PERSON OR COMPANY ON
ITS BEHALF IN RELATION TO THE PROFITABILITY OF OR ANY OTHER
CONSEQUENCES OR BENEFITS TO BE OBTAINED FROM THE DELIVERY OR
USE OF THE SOFTWARE AND ANY ACCOMPANYING MICROSOFT
HARDWARE, SOFTWARE, MANUALS OR WRITTEN MATERIALS. YOU HAVE
RELIED UPON YOUR OWN SKILL AND JUDGEMENT IN DECIDING TO
ACQUIRE THE SOFTWARE AND ANY ACCOMPANYING HARDWARE,
MANUALS AND WRITTEN MATERIALS FOR USE BY YOU. EXCEPT AS AND TO
THE EXTENT PROVIDED IN THIS AGREEMENT, NEITHER MANUFACTURER
AND/OR MICROSOFT CORPORATION (OR RELATED COMPANY OF EITHER)
WILL IN ANY CIRCUMSTANCES BE LIABLE FOR ANY OTHER DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS
OF BUSINESS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION OR OTHER INDIRECT OR CONSEQUENTIAL LOSS) ARISING
OUT OF THE USE OR INABILITY TO USE OR SUPPLY OR NON-SUPPLY OF
THE SOFTWARE AND ANY ACCOMPANYING HARDWARE AND WRITTEN
MATERIALS. MANUFACTURER'S AND/OR MICROSOFT CORPORATION (OR
RELATED COMPANY OF EITHER) TOTAL LIABILITY UNDER ANY PROVISION
OF THIS AGREEMENT IS IN ANY CASE LIMITED TO THE AMOUNT
ACTUALLY PAID BY YOU FOR THE SOFTWARE AND/OR MICROSOFT
HARDWARE.
This agreement is governed by the laws of New South Wales, Australia or,
where supplies are made in New Zealand, by the laws of New Zealand.
WARRANTY AND SPECIAL
PROVISIONS FOR ENGLAND,
SCOTLAND, WALES AND
IRELAND - LIMITED
WARRANTY
September 30, 2004
LIMITED WARRANTY. Manufacturer warrants that (a) the SOFTWARE will
perform substantially in accordance with the accompanying written
materials for a period of ninety (90) days from the date of receipt, and (b)
any Microsoft hardware accompanying the SOFTWARE will be free from
defects in materials and workmanship under normal use and service for a
period of one (1) year from the date of receipt. Any implied warranties on
the SOFTWARE and Microsoft hardware are limited to ninety (90) days and
one (1) year, respectively. Some states/jurisdictions do not allow
limitations on duration of an implied warranty, so the above limitation may
not apply to you.
CUSTOMER REMEDIES. Manufacturer's and its suppliers' entire liability
and your exclusive remedy shall be, at Manufacturer's option, either (a)
return of the price paid, or (b) repair or replacement of the SOFTWARE or
hardware that does not meet this Limited Warranty and which is returned to
7F3319
13
Manufacturer with a copy of your receipt. This Limited Warranty is void if
failure of the SOFTWARE or hardware has resulted from accident, abuse, or
misapplication. Any replacement SOFTWARE or hardware will be warranted
for the remainder of the original warranty period or thirty (30) days,
whichever is longer.
NO OTHER WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, MANUFACTURER AND ITS SUPPLIERS DISCLAIM ALL
OTHER REPRESENTATIONS, WARRANTIES, CONDITIONS OR OTHER
TERMS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO
IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE SOFTWARE,
THE ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING
HARDWARE. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHERS WHICH VARY FROM
STATE/JURISDICTION TO STATE/JURISDICTION.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
MANUFACTURER OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES
WHATSOEVER (INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT
DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER
PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE
THIS PRODUCT, EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, MANUFACTURER'S AND ITS
SUPPLIERS' ENTIRE LIABILITY UNDER ANY PROVISION OF THIS
AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU
FOR THE SOFTWARE AND/OR MICROSOFT HARDWARE. BECAUSE SOME
STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
SPECIAL PROVISIONS:
Reverse Engineering: If you acquired the SOFTWARE in the European
Community, you may not reverse engineer, decompile, or disassemble the
SOFTWARE except to the extent and for the express purposes authorized by
applicable law.
This Software License Agreement is governed by the laws of England.
14
7F3319
September 30, 2004
WARRANTY AND SPECIAL
PROVISIONS FOR CANADA LIMITED WARRANTY
September 30, 2004
LIMITED WARRANTY. Manufacturer warrants that (a) the SOFTWARE will
perform substantially in accordance with the accompanying written
materials for a period of ninety (90) days from the date of receipt, and (b)
any Microsoft hardware accompanying the SOFTWARE will be free from
defects in materials and workmanship under normal use and service for a
period of one (1) year from the date of receipt. Any implied warranties or
conditions on the SOFTWARE and Microsoft hardware are limited to ninety
(90) days and one (1) year, respectively. Some states/jurisdictions do not
allow limitations on duration of an implied warranty, so the above
limitation may not apply to you.
CUSTOMER REMEDIES. Manufacturer's and its suppliers' entire liability
and your exclusive remedy shall be, at Manufacturer's option, either (a)
return of the price paid, or (b) repair or replacement of the SOFTWARE or
hardware that does not meet this Limited Warranty and which is returned to
Manufacturer with a copy of your receipt. This Limited Warranty is void if
failure of the SOFTWARE or hardware has resulted from accident, abuse, or
misapplication. Any replacement SOFTWARE or hardware will be warranted
for the remainder of the original warranty period or thirty (30) days,
whichever is longer.
NO OTHER WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, MANUFACTURER AND ITS SUPPLIERS DISCLAIM ALL
OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE SOFTWARE,
THE ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING
HARDWARE. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHERS WHICH VARY FROM
STATE/JURISDICTION TO STATE/JURISDICTION.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
MANUFACTURER OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES
WHATSOEVER (INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT
DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER
PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE
THIS PRODUCT, EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, MANUFACTURER'S AND ITS
SUPPLIERS' ENTIRE LIABILITY UNDER ANY PROVISION OF THIS
7F3319
15
AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU
FOR THE SOFTWARE AND/OR MICROSOFT HARDWARE. BECAUSE SOME
STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
This Software License Agreement is governed by the laws of the Province of
Ontario, Canada. Each of the parties hereto irrevocably attorns to the
jurisdiction of the courts of the Province of Ontario and further agrees to
commence any litigation which may arise hereunder in the courts located
in the Judicial District of York, Province of Ontario.
GARANTIE ET DISPOSITIONS Si vous vous êtes procuré ce produit Microsoft(r) ou ce matériel
PARTICULIÈRES POUR LE
Microsoft(r) au CANADA, la garantie suivante s'adresse à vous.
CANADA GARANTIE LIMITÉE GARANTIE LIMITÉE. Le Fabricant garantit que (a) la performance du
LOGICIEL sera substantiellement en conformité avec les documents écrits
qui l'accompagnent pour une période de quatre-vingt-dix (90) jours à
compter de la date de réception, et que (b) tout matériel de Microsoft
fourni avec le LOGICIEL sera exempt de défaut de matière première ou de
vice de fabrication dans des conditions normales d'utilisation et d'entretien
pour une période d'un (1) an à compter de la date de réception. Toutes
garanties ou conditions implicites concernant le LOGICIEL et le matériel
Microsoft sont limitées à quatre-vingt-dix (90) jours et un (1) an,
respectivement.
RECOURS DU CLIENT. La seule obligation du Fabricant et de ses
fournisseurs et votre recours exclusif seront, au choix du Fabricant, soit
(a) le remboursement du prix payé ou (b) la réparation ou le
remplacement du LOGICIEL ou du matériel qui n'est pas conforme à la
Garantie limitée et qui est retourné au Fabricant avec une copie de votre
reçu. Cette Garantie limitée est nulle si la défectuosité du LOGICIEL ou du
matériel est causée par un accident, un traitement abusif ou une mauvaise
application. Tout LOGICIEL ou matériel de remplacement sera garanti pour
le reste de la période de garantie initiale ou pour trente (30) jours, selon
laquelle de ces deux périodes est la plus longue.
EXCLUSION DE TOUTE AUTRE GARANTIE. Selon la portée maximale
autorisée par la loi applicable, le Fabricant et ses fournisseurs renoncent à
toutes autres garanties ou conditions, expresses ou implicites, y compris
mais ne se limitant pas aux garanties implicites de la qualité marchande ou
un usage particulier en ce qui concerne le LOGICIEL, la documentation
16
7F3319
September 30, 2004
écrite et tout matériel qui l'accompagnent. Cette garantie limitée vous
accorde des droits spécifiques reconnus par la loi.
ABSENCE DE RESPONSABILITÉ POUR LES DOMMAGES INDIRECTS. Selon
la portée maximale autorisée par la loi applicable, le Fabricant ou ses
fournisseurs ne pourront être tenus responsables en aucune circonstance
de tous dommages quels qu'ils soient (y compris mais non de façon
limitative les dommages directs ou indirects causés par des lésions
corporelles, la perte de bénéfices commerciaux, l'interruption des affaires,
la perte d'information commerciale ou toute autre perte pécuniaire)
découlant de l'utilisation ou de l'impossibilité d'utilisation de ce produit, et
ce même si le Fabricant a été avisé de l'éventualité de tels dommages. En
tout état de cause, la seule responsabilité du Fabricant et de ses
fournisseurs en vertu de toute disposition de cette Convention se limitera
au montant que vous aurez effectivement payé pour l'achat du LOGICIEL
et/ou du matériel Microsoft.
La présente Convention de droits d'utilisation de logiciel est régie par les
lois de la province d'Ontario, Canada. Chacune des parties aux présentes
reconnaît irrévocablement la compétence des tribunaux de la province
d'Ontario et consent à instituer tout litige qui pourrait découler des
présentes auprès des tribunaux situés dans le district judiciaire de York,
province d'Ontario.
WARRANTY AND SPECIAL
PROVISIONS FOR THE UNITED
STATES OF AMERICA AND
ANY OTHER COUNTRY LIMITED WARRANTY
September 30, 2004
LIMITED WARRANTY. Manufacturer warrants that (a) the SOFTWARE will
perform substantially in accordance with the accompanying written
materials for a period of ninety (90) days from the date of receipt, and (b)
any Microsoft hardware accompanying the SOFTWARE will be free from
defects in materials and workmanship under normal use and service for a
period of one (1) year from the date of receipt. Any implied warranties on
the SOFTWARE and Microsoft hardware are limited to ninety (90) days and
one (1) year, respectively. Some states/jurisdictions do not allow
limitations on duration of an implied warranty, so the above limitation may
not apply to you.
CUSTOMER REMEDIES. Manufacturer's and its suppliers' entire liability
and your exclusive remedy shall be, at Manufacturer's option, either (a)
return of the price paid, or (b) repair or replacement of the SOFTWARE or
hardware that does not meet this Limited Warranty and which is returned to
Manufacturer with a copy of your receipt. This Limited Warranty is void if
failure of the SOFTWARE or hardware has resulted from accident, abuse, or
7F3319
17
misapplication. Any replacement SOFTWARE or hardware will be
warranted for the remainder of the original warranty period or thirty (30)
days, whichever is longer.
NO OTHER WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, MANUFACTURER AND ITS SUPPLIERS DISCLAIM ALL
OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE SOFTWARE,
THE ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING
HARDWARE. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHERS WHICH VARY FROM
STATE/JURISDICTION TO STATE/JURISDICTION.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
MANUFACTURER OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES
WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, INCIDENTAL,
CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS
OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF MANUFACTURER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY
CASE, MANUFACTURER'S AND ITS SUPPLIERS' ENTIRE LIABILITY UNDER
ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE
AMOUNT ACTUALLY PAID BY YOU FOR THE SOFTWARE AND/OR
MICROSOFT HARDWARE. BECAUSE SOME STATES/JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
SPECIAL PROVISIONS
U.S. GOVERNMENT LICENSE RIGHTS. All SOFTWARE provided to the U.S.
Government pursuant to solicitations issued on or after December 1, 1995
is provided with the commercial license rights and restrictions described
in this EULA. All SOFTWARE provided to the U.S. Government pursuant to
solicitations issued prior to December 1, 1995 is provided with "Restricted
Rights" as provided for in FAR, 48 CFR 52.227-14 (JUNE 1987) or DFAR,
48 CFR 252.227-7013 (OCT 1988), as applicable. Manufacturer is
responsible for ensuring the SOFTWARE is marked with the "Restricted
Rights Notice" or "Restricted Rights Legend," as required. All rights not
18
7F3319
September 30, 2004
expressly granted are reserved.
If you acquired the SOFTWARE in the United States of America, this Software
License Agreement and Warranty are governed by the laws of the State of
Washington, U.S.A. If you acquired the SOFTWARE outside the United States
of America, local law may apply.
September 30, 2004
7F3319
19
Blank Page
Table of Contents
Important Notice to Purchaser: ....................................................................................................................... 1-1
End User License Agreement (EULA)............................................................................................................... 1-2
EASTMAN KODAK COMPANY Health Imaging Software End User License Agreement ................................. 1-2
License............................................................................................................................................... 1-2
Limited Warranty................................................................................................................................ 1-3
Limitation of Remedies....................................................................................................................... 1-4
General .............................................................................................................................................. 1-4
U.S. Government Restricted Rights ..................................................................................................... 1-4
END-USER LICENSE AGREEMENT FOR MICROSOFT DESKTOP OPERATING SYSTEMS................................ 1-5
SOFTWARE PRODUCT LICENSE .......................................................................................................... 1-5
WARRANTY AND SPECIAL PROVISIONS FOR AUSTRALIA, NEW ZEALAND OR PAPUA NEW GUINEA - EXPRESS LIMITED WARRANTY............................................................................................................. 1-12
WARRANTY AND SPECIAL PROVISIONS FOR ENGLAND, SCOTLAND, WALES AND IRELAND - LIMITED WARRANTY.............................................................................................................................................. 1-13
WARRANTY AND SPECIAL PROVISIONS FOR CANADA - LIMITED WARRANTY ................................... 1-15
GARANTIE ET DISPOSITIONS PARTICULIÈRES POUR LE CANADA GARANTIE LIMITÉE...................... 1-16
WARRANTY AND SPECIAL PROVISIONS FOR THE UNITED STATES OF AMERICA AND ANY OTHER COUNTRY
- LIMITED WARRANTY ..................................................................................................................... 1-17
1 Introduction
Kodak DryView 8150
Laser Imager ................................................................................................................................................... 1-1
How the Laser Imager Works.................................................................................................................... 1-3
Print Sequence.......................................................................................................................................... 1-4
2 Operation and Maintenance
Operator Control of the Imager ....................................................................................................................... 2-1
Turning Imager Power ON and OFF................................................................................................................. 2-2
Power ON ................................................................................................................................................. 2-2
Power OFF ................................................................................................................................................ 2-2
Power Failures.......................................................................................................................................... 2-4
Using the Touch Screen Local Panel ................................................................................................................ 2-5
September 30, 2004
7F3319
Table of Contents
Home Screen ............................................................................................................................................2-5
Screen Controls.........................................................................................................................................2-6
Local Panel Help .......................................................................................................................................2-8
Local Panel Passcodes...............................................................................................................................2-9
Home Screen Description .......................................................................................................................2-10
Film Supply Button Status Information..............................................................................................2-12
Home Screen Status Line ..................................................................................................................2-14
Home Screen Attention Notices.........................................................................................................2-15
Film Supply Screen..................................................................................................................................2-16
Density Test Screen...........................................................................................................................2-17
Main Menu..............................................................................................................................................2-18
System Functions Screen...................................................................................................................2-20
Select job Queue Type Screen...........................................................................................................2-22
System Information Menu.................................................................................................................2-26
Current Errors Screen ......................................................................................................................2-29
Error Message Screen.......................................................................................................................2-30
Setup Imager Screen.........................................................................................................................2-31
Service Screen ..................................................................................................................................2-42
Image Resizing........................................................................................................................................2-45
Operation ......................................................................................................................................................2-48
Opening the Front Door ..........................................................................................................................2-48
Opening the Front Door Manually ...........................................................................................................2-49
Opening the Hood...................................................................................................................................2-51
Loading and Removing Film Cartridges ...................................................................................................2-52
Recycling Empty Film Cartridges.......................................................................................................2-53
Running a Calibration Print.....................................................................................................................2-53
Calibration Prints..............................................................................................................................2-53
Calibration Failure............................................................................................................................2-53
Requesting a Calibration Print from the Local Panel .........................................................................2-53
Requesting a Density Test........................................................................................................................2-54
Local Panel Passcodes ...................................................................................................................................2-57
Setting Up Passcodes...............................................................................................................................2-58
Logging On to the Local Panel with a passcode........................................................................................2-58
Logging Off..............................................................................................................................................2-59
Key Operator Functions .................................................................................................................................2-59
Adjusting Local Panel Preferences...........................................................................................................2-60
7F3319
September 30, 2004
Displaying the Setup Local Panel Screen........................................................................................... 2-60
Setting Time and Date.................................................................................................................................... 2-64
Operator Maintenance................................................................................................................................... 2-67
Cleaning the Laser Imager ...................................................................................................................... 2-67
Replacing the Charcoal Filter .................................................................................................................. 2-67
Preventive Maintenance .......................................................................................................................... 2-69
3 Troubleshooting
Correcting Errors ............................................................................................................................................ 3-1
Error and Alarm Indications ..................................................................................................................... 3-1
Home Screen Status Messages............................................................................................................ 3-1
Error Message Screen ........................................................................................................................ 3-2
Current Errors Screen ........................................................................................................................ 3-4
Current Errors Notice on the
Home Screen ..................................................................................................................................... 3-5
Calibration Failure........................................................................................................................................... 3-6
Film Transport Problems................................................................................................................................. 3-8
Manually Closing the Film Cartridge ................................................................................................................ 3-9
Film Pickup Problems in Area 1 .................................................................................................................... 3-10
Removing Film Jams from Area 2 .................................................................................................................. 3-11
Removing Film Jams from Area 3 .................................................................................................................. 3-12
Removing Film Jams from Area 4 .................................................................................................................. 3-14
Removing Film jams from Area 5................................................................................................................... 3-16
Calling for Support ........................................................................................................................................ 3-17
4 Adding a Modality
Preparing to Add a Modality ............................................................................................................................ 4-1
Modality-Related Parameters........................................................................................................................... 4-2
Configuration Procedure ................................................................................................................................. 4-3
Changing the Modality ID .............................................................................................................................. 4-10
Setting the Advanced Parameters ................................................................................................................... 4-11
Selecting Film Size .................................................................................................................................. 4-12
Selecting Film Type ................................................................................................................................. 4-13
Selecting the Type of Image Resizing....................................................................................................... 4-14
Selecting Print Priority ............................................................................................................................ 4-15
Selecting N_Event Reporting ................................................................................................................... 4-17
Selecting Report Warnings ...................................................................................................................... 4-18
September 30, 2004
7F3319
Selecting Use of a Density Patch on the Film............................................................................................4-18
Selecting Color Negotiation .....................................................................................................................4-19
Setting up the Text
(Annotation) Box ..........................................................................................................................................4-20
Saving the Modality (SCU)
Parameters ....................................................................................................................................................4-21
Backing up the Configuration ........................................................................................................................4-22
5 Optimizing Image Quality
Image Quality Parameters................................................................................................................................5-1
Selecting the Image Quality Parameter Values..................................................................................................5-2
Non-GSDF Modalities ................................................................................................................................5-2
GSDF-Compliant Modalities.......................................................................................................................5-9
Entering the Image Quality Parameters ..........................................................................................................5-10
6 Specifications
Dimensions .....................................................................................................................................................6-1
Electrical .........................................................................................................................................................6-1
Laser Specifications .........................................................................................................................................6-2
Operating Environment....................................................................................................................................6-2
Storage Environment .......................................................................................................................................6-2
Environmental Effects ......................................................................................................................................6-2
Film Sizes ........................................................................................................................................................6-3
Film Types .......................................................................................................................................................6-3
Film Throughput..............................................................................................................................................6-3
Agency Compliance..........................................................................................................................................6-3
7 Film Technical Information
General Description.........................................................................................................................................7-1
Spectral Sensitivity.....................................................................................................................................7-1
Image Quality............................................................................................................................................7-2
Automatic Image Quality Control...............................................................................................................7-2
Environmental Impact...............................................................................................................................7-2
Recycling Film...........................................................................................................................................7-3
Storing and Handling Undeveloped Film....................................................................................................7-3
Handling Developed Film ..........................................................................................................................7-4
Archiving Developed Film..........................................................................................................................7-4
Dissipating Odor .......................................................................................................................................7-4
7F3319
September 30, 2004
Dissipating Heat........................................................................................................................................ 7-5
Glossary
September 30, 2004
7F3319
6
7F3319
September 30, 2004
1
Introduction
Kodak DryView 8150
Laser Imager
The Kodak DryView 8150 Laser Imager is a continuous-tone laser imager
with an internal photothermographic film processor. Heat, rather than
photo chemicals, is used to develop the film. The Imager receives digital
images from medical image source devices (modalities) over a network.
The format that the Imager accepts is DICOM.
The Imager prints images on Kodak DryView Laser Imaging Film that is
packed in 125-sheet cartridges. The Imager can accept blue or clear base
film in any of the following sizes:
• 11 x 14 in. DryView Film (28 x 35 cm)
• 14 x 14 in. DryView Film (35 x 35 cm)
• 14 x 17 in. DryView Film (35 x 43 cm)
Only one film size can be loaded in the Imager at a time.
September 30, 2004
7F3319
1-1
Introduction
H200_0036CAA
8150 Laser Imager
1-2
7F3319
September 30, 2004
Introduction
How the Laser Imager
Works
The Imager is a network printer connected on a network along with one or
more medical imaging devices. It prints images sent over the network from
up to twelve medical imaging devices or workstations sending images
concurrently.
Image Source Devices
Modality
Network
Modality
Kodak DryView
8150 Laser Imager
H200_0001ba
Modality
The Imager has hard-disk storage for a large number of digital images. As
images arrive, they are stored on the hard disk and placed in a print queue
(sequenced for printing) based on time of receipt and priority.
Because the Imager can store images, it can continue to accept incoming
print jobs even when the film cartridge is empty or the Imager is
temporarily unable to print.
Images that require a different film size or film type than is currently in the
Imager are placed in a separate "waiting for media" queue and a message
on the Local Panel reminds the operator to change film.
September 30, 2004
7F3319
1-3
Introduction
During normal operation the Imager requires very little operator attention.
The Imager prints automatically in response to print requests from the
associated image devices. Information sent along with images by the
modalities, such as film size, density and priority, control the print
operations. Main operator responsibilities are loading film and monitoring
for malfunctions.
Print Sequence
1-4
Each time the Imager prints a film, the following sequence occurs. (Refer to
the diagram on the following page.)
1. Suction cups in the pickup area lift a single sheet of film out of the
supply cartridge and feed the film into the film feed rollers.
2. The film feed rollers move the film down to the film platen (exposure
module).
3. The platen rollers move the film into the film platen.
4. The platen holds the film stationary while a scanning laser beam
exposes the film (writes the image onto the film).
5. After exposure, the platen rollers reverse direction and move the film
up to the transport rollers. These rollers then move the film up into
the film processor.
6. As the film passes over the rotating processor drum, heat from the
drum develops the film.
7. Rollers move the developed film from the processor drum, through
the densitometer and on to the receive tray.
7F3319
September 30, 2004
Introduction
Receive Tray
Film
Processor
Drum
Densitometer
Transport
Rollers
Film Supply
Cartridge
Platen
Rollers
Suction
Cups
Platen
Film Feed
Rollers
Exposure
Module
Laser
Beam
H200_0039DA
8100–49C
Dashed line is the film path
Print Sequence
September 30, 2004
7F3319
1-5
Blank Page
2
Operation and Maintenance
Operator Control of the Imager
During normal operation, the Kodak DryView 8150 Laser Imager receives
and automatically prints images sent by modalities over a network. Very
little operator control is required. The main operator responsibilities are:
• Turn Imager power ON or OFF.
• Load film cartridges.
• Monitor the number of prints remaining until preventive maintenance is
required.
• Monitor and control some Imager functions using the Local Panel.
Power Switch
(On Rear of Cabinet)
Local Panel
Operator Controls
September 30, 2004
7F3319
2-1
Operation and Maintenance
Turning Imager Power ON and OFF
Power ON
The power switch is located on the back of the Laser Imager. To turn ON the
Imager, set the power switch to the "|" position. The Imager performs a
power-up self test that takes about five minutes. After some initial boot-up
screens, the Local Panel Home screen appears.
Power Off
Button
DVB
14x17
Local Panel Home Screen
After the power-up test, the Imager begins a warm-up period that lasts up to
25 minutes. The warm-up period varies depending on how long the Imager
has been turned OFF. During warm-up the Imager can receive and store
images but cannot print films. When the Imager reaches operating
temperature, it starts printing any images that have accumulated during the
warm-up period.
During warm-up you can use the Local Panel to check the contents of the
film cartridge and to open the front door to load a new film cartridge, if
necessary.
Power OFF
2-2
Turn the Imager OFF if you do not expect to use it for an extended period of
time or to conserve electrical power.
1. Touch the Power Off button on the Home screen.
7F3319
September 30, 2004
Operation and Maintenance
2. Touch Yes.
The following 2 screens are displayed while the Imager is shutting
down software.
3. Set the power switch to the "O" (Off) position.
September 30, 2004
7F3319
2-3
Operation and Maintenance
Power Failures
2-4
In the event of a power loss, the Laser Imager shuts down. Any films in
process will not be completed.
To restart the Imager after power is restored, turn OFF the power switch on
the back of the Imager and then turn it ON. After warming up, the Imager
automatically reprints any films that were in process when power was
interrupted.
7F3319
September 30, 2004
Operation and Maintenance
Using the Touch Screen Local Panel
The Local Panel displays a collection of screens that you can use to monitor
Imager operations and to control some Imager functions. You make menu
selections and navigate between Local Panel screens by lightly touching
buttons on the touch screen. There is a beep sound each time you touch a
button. This sound can be disabled if you wish.
CAUTION:
Use only your finger when selecting buttons on the screen. Using hard
objects, such as pens or pencils, can damage the surface of the touch
screen.
Home Screen
The Home screen appears after the initial startup screens. It provides status
information about the current Imager operation and shows the contents of
the film tray. From this screen you can navigate to all other Local Panel
screens.
The Local Panel automatically returns to the Home screen from any other
screen after a few minutes if there is no operator input to the touch screen.
For more information about the Home screen see “Home Screen
Description” on page 2-10.
DVB
14x17
September 30, 2004
7F3319
2-5
Operation and Maintenance
Screen Controls
Many of the Local Panel screens have some or all of the buttons on the
typical screen below. These buttons are used to navigate between the Local
Panel screens and to select items from lists or menus.
Screen Controls
2-6
Home button. Returns to the Home screen.
Menu button. Displays the Main Menu screen. (See “Main
Menu” on page 2-18.)
Help button. Displays Help information for the current screen or
selected item.
Back Arrow button. Returns to the previous screen.
Up Arrow button. Moves the Highlight bar up to the next item
in the list.
Select button. Selects the highlighted item in the list. This displays
a screen related to the selected list item.
Down Arrow button. Moves the Highlight bar down to the next
item in the list.
7F3319
September 30, 2004
Operation and Maintenance
List. Several types of lists appear in Local Panel screens. Examples
are menus, lists of print jobs and lists of modalities.
You select an item in a list using the Up and Down arrows and the
Select button. Selecting an item displays another screen that
presents information or choices related to the item you selected.
Highlight Bar. This gray bar identifies which one of the items in
the list will be selected by the Select button. You can move the
Highlight Bar with the Up and Down arrows.
When a list contains more items than can be displayed on a single screen, a
second screen contains the last items in the list. A vertical bar indicates that
there are two screens for the list. A position indicator shows if the screen
displayed is the first or second screen. To move to the second screen, use
the Down arrow to scroll beyond the last item on the first screen.
Position Position
Indicator Indicator
Scroll
Bar
First Screen
Second Screen
List Scroll Bar
September 30, 2004
7F3319
2-7
Operation and Maintenance
Local Panel Help
The Local Panel has several types of Help information that explain most of
the Local Panel functions. Touch the Help button to see a Help topic.
Screen Help
Most screens have a Help button that provides Help
information for the screen and for buttons and other
items on the screen
Local Panel
Tutorial
On the Home screen, touch the Help button to see a
list of brief tutorials about the Imager. There are four
topics:
•
•
•
•
Installation
Assistants
Change Film
Density Test
Set Up Imager
Open Front Door
The installation assistants lead the user through the
setup procedures. There are two installation assistants:
• Installation Assistant - Used for first-time setup of
the Imager.
• Modality Installation Assistant - Used when
configuring the Imager for a specific modality.
2-8
7F3319
September 30, 2004
Operation and Maintenance
Local Panel Passcodes
Some Local Panel functions can be performed only by users with passcodes.
There are three types of Local Panel passcodes:
Key Operator
Passcode
Lets Key Operators perform the following
functions:
•
•
•
•
Delete print jobs
Perform some Local Panel setup functions
Disable printing
Enter the date of a filter change in the Service
Log
Customer First
Passcode
Lets Customer First-trained technicians select the
PM (preventive maintenance) function on the
Service screen. This records the date of a PM and
resets the print count to zero.
Service Passcode
Lets installers and service technicians use all Local
Panel functions except the PM (preventive
maintenance) function on the Service screen.
Users without passcodes can access most Local Panel features except:
• Imager setup functions.
• Service functions.
For more information on passcodes see “Local Panel Passcodes” on
page 2-57.
September 30, 2004
7F3319
2-9
Operation and Maintenance
Home Screen Description During the power-up self test, this is the first screen you see after the initial
start-up screens. The Local Panel always returns to this screen after a few
minutes if there are no operator selections on the touch screen.
10
Title Bar. Shows the Date and Time.
Menu button. Displays the Main Menu.(See “Main Menu” on
page 2-18.)
Help button. Displays Help information for the current screen.
For the Home screen, this button also lets you view tutorials that
explain the Local Panel functions.
From the Home screen Help you can also change the language for
the Home screen
Power Off button. Displays a confirmation screen where you can
select Yes to turn off the Imager or No to return to the Home
screen.
NOTE: This button does not remove all power from the Imager.
You must also turn OFF the power switch on the back of the
Imager.
2-10
Film Count. The number of sheets remaining in the film cartridge.
7F3319
September 30, 2004
Operation and Maintenance
Film Supply button. Touch to display the Film Supply screen
which provides 3 choices:
• Open Front Door
• Calibrate Film
• Run Density Test
(See “Film Supply Screen” on page 2-16.)
The Film Supply button also displays status information about the
film supply within its outline. (See “Film Supply Button Status
Information” on page 2-12).
Attention Notice. There are three attention notices:
• Jobs Waiting for Media
• PM due: Call Service
• Current Errors: X
See “Home Screen Attention Notices” on page 2-15.
September 30, 2004
Active Jobs. The number of print jobs in the Imager being printed
and waiting to be printed.
Status Line. Several status messages about the current condition
of the Imager can appear on this line. (See “Home Screen Status
Line” on page 2-14.)
10
Imager Name. The name given to the Imager when it was
installed.
7F3319
2-11
Operation and Maintenance
Film Supply Button Status
Information
Type of Film
Film Size
The Film Supply button displays information about the film supply with a
combination of messages and color. The most common condition is:
Blue
Background
DVB
14X17
Number of Sheets
Remaining
This indicates a normal film supply (20 sheets or more).
The following table shows all of the status conditions that can be displayed
in the Film Supply button.
Film Supply Button Status Combinations
Message in
Film Supply
Button
2-12
Background Explanation
Color
Film Count, Film
Blue
DVB
type, and Size
Film normal (20 sheets of more).
Film Count, Film
type, and Size
Film low (Less than 20 sheets).
Yellow
Film Count (0),
Flashing Blue
Film type, and Size and Yellow
Film cartridge empty.
No Cartridge
Yellow
No film cartridge in the Imager.
Opening - Please
Wait
Blue
The Imager is opening the film
cartridge after the front door has
been closed.
Calibrating - Please Blue
Wait
The Imager is running a
calibration print.
Not Calibrated
The AIQC system is not calibrated
for the current film cartridge. Run
a calibration print. See
“Calibration Prints” on page 2-53.
7F3319
Yellow
September 30, 2004
Operation and Maintenance
Film Supply Button Status Combinations
September 30, 2004
Message in
Film Supply
Button
Background Explanation
Color
Fail
Flashing Blue
and Yellow
7F3319
The film cartridge has failed to
open.
2-13
Operation and Maintenance
Home Screen Status Line
The following messages can appear on the Status Line:
Message
Explanation
Printing
Printing images from the print queue.
Ready
Ready to print. No images in the print queue for
the currently loaded film size.
Self-test
The Imager is performing the power-up self test.
Warming =
The Imager is warming up. The number of
minutes until the Imager will be at operating
temperature is displayed after the = sign. The
Imager can receive images but not print until
fully warmed.
Door open requested The operator has touched the Door Open
button on the Local Panel. The door will be
unlatched after the Imager closes the film
cartridge and completes any films currently
being processed.
2-14
Door open
The front door is open.
Hood open
The hood is open.
Not ready
The Imager cannot print.
Printing disabled
Printing has been disabled for service.
7F3319
September 30, 2004
Operation and Maintenance
Home Screen Attention
Notices
Three attention notices can appear on the Home Screen:
This notice appears when there are 1 or more print jobs in the print queue
that require a different size or type of film than is currently loaded. An
audible alarm sounds when the number of jobs waiting for media goes from
0 to 1. Touch the screen anywhere to silence the alarm.
This notice shows the number of errors that have not yet been corrected.
Depending on the type of error(s), the Imager may not be able to continue
printing or receiving messages. To see a list of current errors, touch Menu
> Current Errors. The Current Errors screen will appear. (See “Current
Errors Screen” on page 2-29).
This notice appears when the print count reaches a preset value. Preventive
Maintenance should be performed. (See “Preventive Maintenance” on
page 2-69.)
September 30, 2004
7F3319
2-15
Operation and Maintenance
Film Supply Screen
This screen provides three options related to the film supply in the Imager.
To display this screen: Home > touch Film Supply button.
Open Front
Door
Unlatches the front door after closing the film cartridge and
completing any films in the film path.
Calibrate
Film
Runs a calibration test print. (See “Calibration Prints” on
page 2-53.)
Run Density Displays the Density Test screen that lets you request a
Test
SMPTE test print. (See “Density Test Screen” on
page 2-17.)
2-16
7F3319
September 30, 2004
Operation and Maintenance
Density Test Screen
This screen lets you to print one or more SMPTE density test pattern images.
You can specify the maximum density.
To display this screen: Home > Film Supply button > Run Density Test
September 30, 2004
Change Copies. Displays a keypad to change the number of
copies of the test print.
Change max density. Displays a keypad to change the maximum
density of the test print.
Print Film (SMPTE). Prints one or more copies of a SMPTE test
pattern.
7F3319
2-17
Operation and Maintenance
Main Menu
You can access most of the Local Panel functions from this menu screen.
To display this screen: Touch Menu.
System Information button. Displays the System Information
Menu screen (see “System Information Menu” on page 2-26).
Setup Imager button. Displays the Setup Imager screen where
you can enter or adjust parameters such as the Imager network
address, hospital name and image quality parameters. See “Setup
Imager Screen” on page 2-31.
This menu choice is used when the Imager is initially installed,
when the configuration parameters must be changed or when
adding a modality.
Most of the setup functions require a Service passcode. (See “Local
Panel Passcodes” on page 2-57.)
Refer to Section 4 for setup procedures to add a modality.
Refer to the Kodak DryView 8150 Laser Imager Installation Guide
for the required setup procedures.
2-18
Current Errors button. Displays the Current Errors screen,
which lists errors detected by the Imager. See “Current Errors
Screen” on page 2-29. If there are no errors, this button will be
disabled.
7F3319
September 30, 2004
Operation and Maintenance
Service button. Displays the Service screen. Provides several
functions used by service technicians.
• Most service functions require the Service passcode. (See
“Local Panel Passcodes” on page 2-57.)
• Refer to “Service Screen” on page 2-42 for information on this
screen.
September 30, 2004
Job Manager button. Leads to several screens that display
information about print jobs in various queues. You can also delete
print jobs from these screens. (See “Select job Queue Type Screen”
on page 2-22.)
System Functions buttons. Displays the System Functions
screen. (See “System Functions Screen” on page 2-20.)
7F3319
2-19
Operation and Maintenance
System Functions Screen
This screen provides two functions:
• Users who have logged on with a passcode can log off from this screen.
• Operators can set the Imager either online or offline.
When online, the Imager is connected to the network and can
receive images from the associated modalities.
When offline, the Imager is temporarily disconnected from the
network and cannot receive images but jobs in the print queue will
continue printing.
To display this screen: Menu > System Functions
Imager online/offline button:
This button toggles between online and offline. When offline, the
Imager is temporarily disconnected from the network and cannot
receive images.
Online/Offline Indicator:
Green indicates online, yellow indicates offline.
2-20
Logoff button. If you have logged on with any passcode, touch
this button to log off. This will prevent unauthorized use of
passcode-protected functions.
7F3319
September 30, 2004
Operation and Maintenance
September 30, 2004
Printing enabled button. Toggles between Printing enabled
and Printing disabled. When printing is disabled, the Imager can
receive images from the modalities on the network but cannot print
from the print queue.
Requires Key Operator or Service passcode.
Enabled/Disabled Indicator. Green when printing is enabled,
yellow when printing is disabled.
Requires Key Operator or Service passcode.
7F3319
2-21
Operation and Maintenance
Select job Queue Type
Screen
This screen lists the three job queues and shows the number of print jobs in
each queue.
To display this screen: Menu > Job Manager
Queued to Print. This queue contains all print jobs waiting to be
printed except jobs classified as “Unprintable” and “Waiting for
media”.
Waiting for Media. This queue contains print jobs that require a
different size or type of film than is currently in the film tray. When
the operator loads another size or type of film, the Imager places
the jobs waiting for the new film in the print queue.
Unprintable jobs. This queue contains print jobs that are
unprintable because of errors.
To see the number of print jobs from each modality in any one of the above
queues, highlight the queue and touch Select. The Select Modality
screen, on page 2-23, appears.
2-22
7F3319
September 30, 2004
Operation and Maintenance
Select Modality Screen
This screen shows the number of jobs in a queue from each modality. From
this screen you can display a list of the jobs from any one modality.
To display this screen: Menu > Job Manager > Queued to Print
Name of the queue being displayed:
• Queued to print
• Waiting for media
• Unprintable jobs
Select to display a list of jobs from all modalities in the queue.
List of modalities. Select a modality to display a list of jobs from
that modality.
To display a list of print jobs from one of the modalities, highlight the
modality and then touch Select. The Job List screen appears. (See “Job
List Screen” on page 2-24.)
To display a list of print jobs from all modalities, highlight All modalities
and then touch Select.
The above screen is for the “Queued to Print” queue. Similar screens can
be displayed for the other two queues:
• “Waiting for media” queue
• “Unprintable jobs” queue
September 30, 2004
7F3319
2-23
Operation and Maintenance
Job List Screen
This screen shows a list of the print jobs within a queue that are all from the
same modality. The name of the source modality appears on the screen.
To display this screen: Menu > Job Manager > Queued to Print >
modality name
Name of Queue
Modality Name
Jobs from the above modality
Job List
To see detailed information about one of the print jobs on the above screen,
highlight the job and then touch Select. The Local Panel will display a
screen that shows job details. (See “Job Details Screen” on page 2-25.)
The choice "Select all for deletion" allows you to delete all jobs in the
queue. When you highlight this choice and touch Select, the Local Panel
displays a Yes/No confirmation message and then prompts for a User ID and
Passcode. The jobs in the queue are deleted only after a valid Key Operator
or Service Passcode is entered.
2-24
7F3319
September 30, 2004
Operation and Maintenance
This screen shows information about a single print job that you selected on
the previous screen.
Users with a Key operator passcode can delete this job from the queue by
touching the Delete button.
To display this screen: Menu > Job Manager > Queued to Print
>modality name > Up/Down to highlight job> Select
Job Details Screen
Job Details
Job Details
September 30, 2004
Name of the queue that contains this print job.
Name of the modality that sent this print job to the Imager.
Date and time the Imager received the print job.
Number of copies to be printed - requested by the submitting
modality.
Job priority - set by the modality.
Film size - specified by the modality.
Film type - specified by the modality.
7F3319
2-25
Operation and Maintenance
System Information Menu
From this screen you can select three information screens that display
information about the Imager.
To display this screen: Menu > System Information
System Information Menu
2-26
System
Information
Displays a screen that identifies the Imager and shows its
network address. You may be asked to supply this
information if you call Kodak for support. See “System
Information Screen” on page 2-27.
Versions
Displays a screen that shows the versions of software
components in the Imager. You may be asked to supply
this information if you call Kodak for support. See
“Versions Screen” on page 2-27.
Print Counts
Displays a screen that shows the number of films the
Imager has printed and number of prints remaining
before preventive maintenance is required. See “Print
Counts Screen” on page 2-28.
7F3319
September 30, 2004
Operation and Maintenance
System Information Screen
This screen displays information that identifies the Imager and shows its
network address.
To display this screen: Menu > System Information >System
Information
Versions Screen
This screen shows the current versions of software components in the
Imager.
To display this screen: Menu > System Information >Versions
September 30, 2004
7F3319
2-27
Operation and Maintenance
Print Counts Screen
This screen shows the number of films printed since the Imager was placed
in service and the number of prints remaining before the next required PM
(Preventative Maintenance session).
To display this screen: Menu > System Information > Print Counts
Print Counts
The "Prints to PM" count is reset to zero when preventive maintenance is
performed.
2-28
7F3319
September 30, 2004
Operation and Maintenance
Current Errors Screen
This screen lists any errors detected by the software in the Imager during
print operations.
To display this screen: Menu > Current Errors
Current Errors
Error code - identifies the type of error. You will be asked for this
code if you call for service.
Date and time the error occurred.
Abbreviated description of the error.
To see more information about an error, touch the Up or Down arrows to
highlight the error entry and then touch Select. The Error Message
screen will display. (See page 2-30.)
September 30, 2004
7F3319
2-29
Operation and Maintenance
Error Message Screen
This screen appears when the Imager detects an error. It provides
information and recommended corrective action for a specific error.
You can also display this screen by selecting an error listed on the Current
Errors screen. (See page 2-29.)
2-30
Error Code - identifies a specific error. You will be asked for this
code if you call for service.
Date and time the error occurred.
Error description.
Corrective action.
Touch to display the System Information screen.
Touch to play a short video on how to correct the problem. Not
available with all error messages
Touch to unlatch the front door. Forces the front door open even
if the film cartridge cannot close. Not present with all error
messages.
Touch X to go to the Current Errors screen. (See page 2-29.)
7F3319
September 30, 2004
Operation and Maintenance
Setup Imager Screen
This screen is the entry point for all of the Imager configuration functions.
These functions are used primarily for installation of the Imager, not for
normal operation. Most of these functions require the Service passcode. A
few of the Local Panel setup functions are accessible with a Key Operator
passcode.
To display this screen: Menu > Setup Imager
September 30, 2004
Network setup. Select to display the Edit network
configuration screen. (See page 2-32.)
Date and Time. Select to display the Date Time screen. (See
page 2-33.)
Modality (SCU) config. Select to display the Select Modality
screen. This is the entry point for setting parameters related to each
modality that will print to the Imager. (See page 2-34.)
Local Panel. Select to display the Setup Local Panel screen.
(See page 2-35.)
Edit service telephone number. Select to display for changing
the service telephone number (See page 2-36.)
Backup configuration. Select to perform a configuration backup
operation. (See “Backing up the Configuration” on page 4-22
Restore configuration. Select to restore the Imager
configuration parameters from a prerecorded backup file. (See
“Restore Configuration” on page 2-37.)
7F3319
2-31
Operation and Maintenance
Edit Network Configuration
Screen
2-32
This screen is used to enter the IP Address and other network parameters
for the Imager. The Service passcode is required to display this screen.
For network setup procedures using this screen, refer to the Installation
Manual for the Kodak DryView 8150 Laser Imager.
To display this screen: Menu > Setup Imager > Network setup
7F3319
September 30, 2004
Operation and Maintenance
Date and Time Screen
September 30, 2004
This screen is used to edit the date and time displayed on the Local Panel
Home screen. The Service passcode is required to access this screen.
The date and time can be changed only within a plus or minus 24-hour
window, just enough for time zone changes.
For date and time setup procedures using this screen, see “Setting Time and
Date” on page 2-64.
To display this screen: Menu > Setup Imager > Date and Time
7F3319
2-33
Operation and Maintenance
Select Modality Screen
2-34
Each of the modalities that has printed at least once to the Imager is listed
on this screen. Selecting one of the modalities leads to a series of
configuration screens that are used to enter and edit image quality
parameters for the selected modality.
The Service passcode is required to access this screen.
For modality setup procedures initiated from this screen, refer to
“Chapter 4 Adding a Modality”.
To display this screen: Menu > Setup Imager > Modality (SCU) config
7F3319
September 30, 2004
Operation and Maintenance
Setup Local Panel Screen
From this screen you can access several other screens that allow you to
adjust some of the Local Panel properties.
To display this screen: Menu > Setup Imager > Local Panel
Calibrate touch accuracy - Displays a screen for setting the accuracy of
the touch buttons on the Local Panel. Requires the Service passcode.
Touch Beep Duration - Displays a screen for setting the duration of the
"beep" that sounds when any button is touched. Requires a Key Operator
passcode. Refer to “Adjust Touch Beep Duration” on page 2-61.
Backlight intensity - Displays a screen for setting the intensity of the
Local Panel backlight. Requires a Key Operator passcode. Refer to “Adjust
Backlight Intensity” on page 2-62
Audible alarm - Displays a screen from which you can:
• Enable or disable the audible alarm.
• Set the duration of audible alarm tone pulses.
The audible alarm sounds when the number of Jobs Waiting for Media goes
from 0 to 1 or when an Error Message screen is displayed. Requires a
Key Operator passcode. Refer to “Adjust the Audible Alarm” on page 2-63
Passcodes - Displays a screen for entering and editing passcodes
Requires the Service passcode. Refer to “Local Panel Passcodes” on
page 2-57.
September 30, 2004
7F3319
2-35
Operation and Maintenance
Edit Service Telephone
Number Screen
2-36
From this screen you can enter the Service Telephone that appears on the
System Information screen.
Requires the Service passcode.
To display this screen: Menu > Setup Imager > Edit Service tel.
number
7F3319
September 30, 2004
Operation and Maintenance
Restore Configuration
This menu choice allows you to restore the Imager configuration
parameters from a previously-recorded backup file.
The backup file is usually recorded on a floppy disk but can also be
recorded on the Imager hard drive or on a remote network drive if
accessible on the network.
The Service passcode is required.
Restore procedure (from floppy disk):
You must have a previously-recorded backup disk.
1. From the Home screen, touch Menu.
2. Touch Set Up Imager.
3. Touch No when a message prompts to Use the Installation
Assistant.
4. If you are not logged in, enter the Service ID and Service Passcode on
the two keypads that appear.
The Setup Imager screen appears
5. Select Restore Configuration.
September 30, 2004
7F3319
2-37
Operation and Maintenance
6. Touch OK.
7. Enter the filename exactly as it is written on the backup disk and touch
OK.
2-38
7F3319
September 30, 2004
Operation and Maintenance
8. Touch Yes.
IMPORTANT:
Do not touch OK yet.
9. Wait for the front door to open.
The Imager first closes the film cartridge, completes any films in
process and then unlatches the front door.
September 30, 2004
7F3319
2-39
Operation and Maintenance
Front Door
Computer
Access Door
H200_0034DAA
10. Open the computer access door.
11. Insert the backup diskette into the floppy disk drive.
12. Touch OK.
The Imager reads in the backup file. This may take several minutes.
2-40
7F3319
September 30, 2004
Operation and Maintenance
13.
14.
15.
16.
Touch OK.
Remove the backup disk from the computer.
Close the computer access door and the Imager front door.
Log out of the Service Passcode if you are done with service functions:
a. Touch the Back arrow to return to the Main Menu.
b.Touch System Functions.
c. Touch Log off and then Touch OK.
17. Touch the Back arrow twice to return to the Home screen.
This completes the restore procedure.
September 30, 2004
7F3319
2-41
Operation and Maintenance
Service Screen
This screen is the access point for the Local Panel Service functions.
To display this screen: Menu > Service
2-42
PM. Enters the date that preventive maintenance is performed and
also resets the print-to-PM counters to zero. See page 2-44.
Requires the Customer First passcode.
Filter Change. Select to enter the date of a filter change. See
page 2-43. Requires Key Operator or Service passcode.
Ping. Tests the network connection between the Imager and any
other device on the network. See page 2-43.
Requires Key Operator or Service passcode.
7F3319
September 30, 2004
Operation and Maintenance
Filter Change - Service Menu
Choice
Selecting Filter Change on the Service screen displays the screen below.
Touch Yes to enter the current date into the Service History log as the date
of a filter change.
Ping - Service Menu Choice
Selecting Ping on the Service screen tests the network connection between
the Imager and any modality on the network. You must know the IP address
of the modality you wish to test.
A keypad appears for entry of the IP address. To send a Ping, enter the IP
address of the modality and touch OK. The Imager sends a test packet to
the modality and waits for a reply.
If the Ping is successful, the following message screen appears:
September 30, 2004
7F3319
2-43
Operation and Maintenance
If the modality does not respond to the Ping, a message screen informs of
the failure
PM (Preventive Maintenance)|
Service Menu Choice
This menu choice performs two functions: Selecting PM on the Service
Screen displays the screen below.
• Enters the current date into the Service History log as the date of a PM
session.
• Resets the "Prints to PM" counter to zero. This counter records the
number of films of each size printed since the last PM.
You must have the Customer First passcode to perform this operation.
When you select PM on the Service Screen, the following screen appears.
Select Yes to continue. Enter the Customer First passcode on the keypad
that follows.
2-44
7F3319
September 30, 2004
Operation and Maintenance
When you enter the Customer First passcode and press OK, the PM date is
entered and the "Prints to PM" counter is reset. A confirmation screen
notifies you that the operation is complete.
Image Resizing
If the image sent from the modality is too large for the size of film in the
Imager, the Imager can resize the image to fit on the film by either of two
methods:
• Minify - To reduce the image to fit on the selected film size.
• Crop - To remove the edges of the image to allow it to fit on the
selected page size.
The resizing method is selected separately for each connected modality
when the Imager is setup. Refer to “Selecting the Type of Image Resizing”
on page 4-14.
Resizing is required when:
• An image is too large to fit on the film currently loaded in the
Imager.
• The modality sends an image with a requested image size
that the Imager cannot print.
When the Imager resizes an image, it prints an icon on the film to notify that
the image has been resized.
Refer to the following table for more information on the resizing methods.
September 30, 2004
7F3319
2-45
Operation and Maintenance
Image Resizing Methods
Resizing Method
Icon Printed
on Film
Minify
Minify Icon
The image file is reduced by the removal of
pixel data.
If the Minify choice was selected when the
Imager was setup, the Imager will minify an
image if:
or
Scale Icon
1. The modality sends an image that is too large for
the film in the Imager. In this case the Minify icon
is printed on the film.
2. The modality requests an image size that the
Imager cannot print. In this case the Scale icon is
printed on the film.
Crop Icon
Crop
The image perimeter is removed to allow the
image to print on the available film and at the
same scale as the anatomical area of interest.
To fit the image on the printable area of the
media, equal portions of the perimeter are
removed from the sides of the image and/or the
top and bottom of the image.
Cropping may be appropriate if the image is too
large to print on the available film, and the size
of the area of interest is important to retain.
NOTE:
If anatomical areas of interest are near an
outer edge of the image, they might be
removed from the image when it is printed.
Continued
2-46
7F3319
September 30, 2004
Operation and Maintenance
Image Resizing Methods
Resizing Method
Icon Printed
on Film
Crop (continued)
Cropping allows “true size” printing for larger
images. True size printing provides a common
scale between images captured on analog
systems (those which use medical x-ray film
exposed by phosphor screens in cassettes)
and printed digital images. The anatomical area
of interest is printed at the same size that it is
captured on the analog system. Measurements
and comparisons between printed analog and
digital images are simplified.
For example, you request a CR image to print
35x43 cm on a laser imager which supports a
maximum print size of 33x41 cm. To make the
area of interest the same size as the captured
image, enable cropping.
September 30, 2004
7F3319
2-47
Operation and Maintenance
Operation
Opening the Front Door
During normal operation you may need to open the front door of the
Imager to insert or remove the film cartridge, clear a film jam or change the
charcoal filter.
To open the front door while power is ON:
1. On the Home screen, touch the Film Supply button.
Film Supply
Button
2. Touch Open Front Door.
The front door opens after the Imager closes the film cartridge and
completes printing any films in process.
If a film jam or other malfunction prevents the film cartridge from closing,
2-48
7F3319
September 30, 2004
Operation and Maintenance
the front door will not unlatch. An error message appears to announce this
error. The Error Message screen includes an Open Door button that will
force the door open even though the film cartridge remains open.
Opening the Front Door
Manually
If the Imager power is OFF or if opening the front door from the Local Panel
fails, you can use the manual latch to open the front door.
NOTE: If you open the door manually, the film cartridge does not close
automatically. You will have to close the cartridge manually if it is
open. Several sheets of film at the top of the cartridge will be
exposed (fogged) and should be discarded. Removal of exposed
films and resealing of a cartridge should be done in a dark room.
Door Open
Slot
Front Door
H200_0037CAA
To manually open the front door:
1. To minimize film exposure, make the room as dark as possible.
2. Raise the hood. See “Opening the Hood” on page 2-51.
3. Insert a small-diameter screwdriver or similar item into the Door
Open Slot and press down.
The door will unlatch.
September 30, 2004
7F3319
2-49
Operation and Maintenance
4. If the film cartridge is open, close the cover immediately.
a. Clear any films that may be jammed in the cartridge area.
b.Turn the rollback knob counterclockwise to close the cartridge.
Rollback
Knob
Film Path
(dashed line)
H200_0004da
Manually Closing the Film Cartridge
2-50
7F3319
September 30, 2004
Operation and Maintenance
Opening the Hood
You will have to open the hood to clear film jams in the developer area or to
open the front door manually.
Output
Tray
Hood Support
Rod
Grasp Hood
Here
CAUTION:
Whenever you raise or lower the hood, grasp the hood only
in the area of the recessed slot below the Local Panel to
avoid pinching your fingers.
To open the hood:
1. Remove any films in the output tray.
2. Grasp the hood at the recessed slot below the Local Panel.
3. Raise the hood until the support rod locks into the top slot.
To close the hood:
CAUTION:
Close the hood carefully. Releasing and dropping the hood
could damage the Laser Imager.
1. Raise the hood slightly and push the rod slightly to the rear from the
slot.
2. Gently lower the hood to the closed position.
September 30, 2004
7F3319
2-51
Operation and Maintenance
Loading and Removing
Film Cartridges
To load a film cartridge:
1. Open the front door. (See “Opening the Front Door” on page 2-48.)
2. Insert the cartridge into the slot as shown in the illustration.
3. Slide the cartridge fully into the Imager.
4. Close the front door.
After you close the door, the Imager opens the film cartridge. If the
film characteristics are different from the previous cartridge, the
Imager automatically runs a calibration print (see “Calibration Prints”
on page 2-53). The Imager then begins printing jobs from the print
queue.
To remove a film cartridge:
1. Open the front door. (See “Opening the Front Door” on page 2-48.)
2. Lift the edge of the cartridge slightly, then pull the cartridge out of the
Imager.
Perforations
to the left
Loading and Unloading Film
2-52
7F3319
September 30, 2004
Operation and Maintenance
Recycling Empty Film
Cartridges
In some regions you can return your empty Kodak DryView Film Cartridges
to Kodak for reuse and recycling. Contact your Kodak sales representative
to determine the availability of the film cartridge recycling program in your
region.
Returned cartridges are carefully inspected. Only components that meet
strict quality standards are reused. Components that do not meet the
standards are sent to recycling centers for reclamation.
This program is part of Kodak’s commitment to reduce the environmental
impact of our products.
For additional information on the Kodak Recycling Program in the U.S. and
Canada, visit the Kodak Web site: www.kodak.com/go/KES
Running a Calibration
Print
You may occasionally have to request that the Imager print a calibration
print to calibrate the Imager. You may be asked to do this if you call for
service. You should also run a calibration print if a “Not Calibrated” status
message appears on the Home screen.
Calibration Prints
Imager calibration is performed by printing a calibration print. The Imager
prints a calibration print when:
• A film cartridge containing film with new sensitometric characteristics
(speed, contrast) is loaded.
• The Imager has not printed film for 7 days.
• The Dpatch (density patch) printed on the film is out of range. Applies to
35 x 43 cm (14 x 17 in.) film only.
You can also request a calibration print from the Local Panel.
A calibration print has a step wedge pattern, a series of 26 stripes of
increasing optical density. The only purpose of a calibration print is to
calibrate the Imager. You can discard all calibration prints.
Calibration Failure
Occasionally, the Imager may fail calibration and will notify the operator
with an error message on the Local Panel. The most common cause is a film
problem. Depending on the cause, the Imager may be able to continue
operating after you acknowledge the error message. For more information
on calibration failure refer to “Calibration Failure” on page 3-6.
Requesting a Calibration
Print from the Local Panel
To request a calibration print from the Local Panel:
1. On the Home screen, touch the Film Supply button.
September 30, 2004
7F3319
2-53
Operation and Maintenance
2. Touch Calibrate Film.
3. Touch Yes then OK.
The Imager will print a calibration film before printing any jobs in the
print queue that have not yet started printing and will interrupt a
multi-sheet print job to run a calibration print.
Requesting a Density Test The Imager can print an internally generated density test print with a SMPTE
pattern. Density test prints are often used as a quality assurance tool to
verify the uniformity of films printed by the Imager.
To request a SMPTE test print:
1. Start from the Home screen.
Film Supply Button
2. Touch the Film Supply button.
2-54
7F3319
September 30, 2004
Operation and Maintenance
3. Touch Run Density Test.
4. If you want to change the maximum density value, highlight Change
Max Density and touch Select.
September 30, 2004
7F3319
2-55
Operation and Maintenance
5. Enter the maximum density value that you want and touch OK.
(Upper limit: 3.1.)
The Density test screen reappears.
6. To print more than one copy, highlight Change copies and touch
Select.
7. On the keypad, enter the number of copies and touch OK.
8. Highlight Print film and touch Select.
The density test print is placed at the front of the print queue.
2-56
7F3319
September 30, 2004
Operation and Maintenance
Local Panel Passcodes
There are four levels of access to the Local Panel. Three of these access
levels require passcodes.
Operator Level
Passcode not required.
Operators can access most Local Panel features
except for Service functions and Imager setup
functions.
Key Operator
Level
Requires a Key Operator User ID and passcode.
In addition to operator-level functions, key
operators can:
• Delete print jobs from the Imager.
• Adjust some Local Panel settings such as back
light intensity and touch beep duration.
• Enable and disable printing.
• Record filter changes in the service log.
Up to 10 Key Operator passcodes are allowed.
Service Level
Requires the Service User ID and passcode.
This passcode allows service technicians to access
all Local Panel functions except the PM function on
the Service screen.
An initial Service passcode is given to the person
who installs the Imager. This passcode should be
changed as part of the installation process.
Customer First
Level
September 30, 2004
7F3319
This level allows the user to access the PM
(preventive maintenance) function on the Service
screen. There is only one Customer First password.
It is given to trained Customer First technicians.
There is no user name associated with this
passcode.
2-57
Operation and Maintenance
Setting Up Passcodes
Key Operator Passcodes and the Service passcode are set up on the
Passcode Entry screen. Each passcode must be accompanied by a User ID.
Only a user with the Service passcode can enter Key Operator passcodes or
change the Service passcode.
The Customer First passcode cannot be changed and is not displayed on the
Passcode Entry Screen.
Passcode Entry Screen
Logging On to the Local
Panel with a passcode
2-58
User IDs. Key Operator user names are the numbers 1-10 and
cannot be changed. The Service user name is always the number
99. User names 9, 10 and 99 appear on a second Passcode Entry
screen which appears when you scroll beyond user name 8.
Passcodes. Passcodes are numeric only and contain 6 digits. No
more than 2 consecutive digits can be the same. For example,
the passcode 224466 is acceptable. The passcode 222345 is not
valid.
When a user selects a function on the Local Panel that requires a passcode,
a keypad appears for entry of a User ID. A second keypad appears for a
Passcode. After entering a valid User ID and Passcode, the user can access
all functions available for the type of password entered.
7F3319
September 30, 2004
Operation and Maintenance
Logging Off
Users who have logged on with any passcode can log off by touching the
Logoff button on the System Functions screen.
There is also a passcode timeout feature that automatically logs a user off if
the are no inputs on the touch screen for 2 minutes. This automatic logoff
does not apply when any of the Setup Imager screens are displayed or when
an Error Message screen is displayed.
Key Operator Functions
The functions described in this section can be performed by a Key Operator
who has logged in with a Key Operator passcode.
For the log-on procedure see “Local Panel Passcodes” on page 2-57.
The Key Operator functions are
• Delete print jobs.
• Set Local Panel properties such as backlight intensity and audible alarm
duration.
• Enable or disable printing
• Enter filter change date in the service history.
September 30, 2004
7F3319
2-59
Operation and Maintenance
Adjusting Local Panel
Preferences
Key Operators can change the following Local Panel properties:
• Volume of "beep" that sounds when you touch any button
• Backlight intensity
• Audible alarm volume
• Audible alarm - enable or disable
A Key Operator passcode is required to change these properties.
Displaying the Setup Local
Panel Screen
You make all changes to the Local Panel properties from the Setup Local
Panel screen. To navigate to this screen:
1. On the Home screen, touch Menu.
2. On the Main Menu screen, touch Setup Imager.
3. When the system prompts to start the Installation Assistant, touch
No.
4. Highlight Local Panel and touch Select.
2-60
7F3319
September 30, 2004
Operation and Maintenance
Set Up Local Panel Screen
Adjust Touch Beep Duration
To adjust beep duration:
1. On the Setup Local Panel screen, highlight Touch Beep Duration.
2. Touch Select.
3. Touch the Up or Down arrows to change duration of the beep sound.
You will hear a beep each time you touch the Up or Down arrows.
4. Touch the Back arrow to return to the Setup Local Panel screen.
September 30, 2004
7F3319
2-61
Operation and Maintenance
Adjust Backlight Intensity
To increase or decrease the backlight intensity:
1. On the Setup Local Panel screen (page 2-61), highlight Backlight
intensity.
2. Touch Select.
3. Touch the Up or Down arrows to change the intensity.
4. Touch the Back arrow to return to the Setup Local Panel screen.
2-62
7F3319
September 30, 2004
Operation and Maintenance
Adjust the Audible Alarm
The audible alarm is a series of tone pulses that sound when an error
occurs or when Waiting for Media appears on the Home screen. You can
adjust the duration of the tone pulses.
1. On the Setup Local Panel screen (page 2-61), highlight Audible
Alarm.
2. Touch Select.
3. Touch the Alarm Enabled button to enable or disable the alarm.
Touching the button repeatedly alternates between enabled and
disabled.
4. Touch the Up or Down arrows to change the tone pulse duration.
5. Touch the Back arrow to return to the Setup Local Panel screen.
September 30, 2004
7F3319
2-63
Operation and Maintenance
Setting Time and Date
The time and date appear in the Home screen.
The time, time format, date and date format can be set. The Service
Passcode is required.
The combination of date and time can be increased or decreased by no
more than 24 hours.
Date and Time
• Formats for time include AM/PM or 24-hour (military).
• Formats for date include
– MM_DD_YYYY
– DD_MM_YYYY
– YYYY_MM_DD
To change the time, time format, date or date format:
1. Touch the Menu button.
2. Touch Setup Imager.
3. You will see a prompt to start the Installation Assistant. Select No.
2-64
7F3319
September 30, 2004
Operation and Maintenance
4. Highlight Date and Time; then touch Select.
5. A keypad will prompt for the for the Service user name and then the
Service passcode if you are not logged in.
6. To change the date format:
a. Highlight Date Format.
b. Touch Select to change the date format.
Each time you touch Select, the date format changes. Select one of
the following:
– MM_DD_YYYY
– DD_MM_YYYY
– YYYY_MM_DD
September 30, 2004
7F3319
2-65
Operation and Maintenance
7. To change the date:
a. Highlight Date and touch Select.
A keypad appears on the Local Panel.
b. Enter the new date and touch OK.
The new date appears on the Date Time screen.
8. To change the time format:
a. Highlight Time Format and touch Select.
b. Touch Select to change the time format.
There are two time formats (AM/PM and 24-hour). Each time you
touch Select, the time format changes to the alternate format.
9. To change the time setting:
a. Highlight Time and touch Select.
A keypad appears.
b. Enter the new time and touch OK.
The new time appears on the Date Time screen.
2-66
7F3319
October 1, 2004
Operation and Maintenance
Operator Maintenance
Cleaning the
Laser Imager
Clean the outside surfaces of the Laser Imager as necessary. Use a soft cloth with warm
water and mild soap.
CAUTION:
Do not use isopropyl alcohol to clean the exterior surfaces of the
Laser Imager. Isopropyl alcohol can dissolve the exterior paint on the
Laser Imager.
Replacing the
Charcoal Filter
Kodak DryView Laser Imaging Film emits a slight odor when it is heated during the
developing process. A charcoal filter in the Imager absorbs and neutralizes this odor.
The filter has a limited life and should be replaced periodically.
You can monitor the number of prints remaining until Preventive Maintenance (PM)
is due by viewing the Print Counts screen. (See “Print Counts Screen” on
page 2-28.) When the print count reaches the preset value, “Preventive Maintenance”
appears on the Home screen.
Preventive Maintenance
Notice
Home Screen
Kodak Field Engineers routinely install a new filter during the Preventive Maintenance
procedure. If your Laser Imager is covered by the Kodak Preventive
Maintenance Plan, you do not have to change the charcoal filter. (See
“Preventive Maintenance” on page 2-69.)
If you do not have the Kodak Preventive Maintenance Plan, replace the charcoal filter
September 30, 2004
7F3319
2-67
Operation and Maintenance
if the odor becomes noticeable or when "Preventive Maintenance" appears on the
Home screen.
CAUTION:
The charcoal filter is considered non-hazardous waste by the US EPA
Resource Recovery Act. Under RCRA, you may dispose of filters in a
landfill or incinerator with energy recovery in a municipal,
commercial or industrial facility. Contact your state or local
government to determine if additional disposal requirements apply.
Pull Out
Filter
Retaining
Clip
H200_0003DAA
Replacing the Charcoal Filter
To install a new filter:
1. Open the front door. (See “Opening the Front Door” on page 2-48.)
2. Push the filter retaining clip back and up.
3. Pull out the old filter.
4. Slide the new filter in, all the way to the back stop.
2-68
7F3319
September 30, 2004
Operation and Maintenance
5. Pull the retaining clip forward and down to lock the filter in place.
6. Close the front door.
7. Change the Filter Change Date in the Service log.
a. On the Home screen touch Menu.
b.Touch Service.
c. Touch Filter Change and then Yes.
The current date is entered into the log as the Filter Change Date.
Preventive
Maintenance
September 30, 2004
To maintain optimum performance from the Laser Imager, Kodak recommends that
preventive maintenance be performed periodically by an Authorized Service Provider
of Kodak products.
Preventive Maintenance includes:
• Installation of a new charcoal filter
• Image assembly cleaning
• Film processor cleaning
You can monitor the number of prints remaining until PM is due by viewing the Print
Counts screen. (See “Print Counts Screen” on page 2-28.) When the print count
reaches the preset limit, “Preventive Maintenance” appears on the Home screen.
Call Service to schedule preventive maintenance (see “Calling for Support” on
page 3-17).
When preventive maintenance is performed, the "Prints to PM" count is reset to zero
and the Preventative Maintenance Notice no longer appears on the Status screen.
7F3319
2-69
Operation and Maintenance
Blank Page
2-70
7F3319
September 30, 2004

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 104
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:711fe007-0df1-46dd-9f72-19812f053014
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2004:10:27 14:50:29-05:00
Create Date                     : 2004:10:27 14:42:20-05:00
Metadata Date                   : 2004:10:27 14:50:29-05:00
Document ID                     : uuid:352c6d16-1c2f-4ca9-9dc6-f2846ec3d75e
Format                          : application/pdf
Title                           : Microsoft Word - Document7
Creator                         : jmurphy
Author                          : jmurphy
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PA481507E2537

Navigation menu