Ecolink Intelligent Technology BHAPIR001 Ring Motion Detector User Manual Ring Video Doorbell Setup and Installation Guide
Ecolink Intelligent Technology, Inc. Ring Motion Detector Ring Video Doorbell Setup and Installation Guide
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3609418 |
| Application ID | pZMn+ehGMhOoe3w0u88QIg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 171.82kB (2147705 bits) |
| Date Submitted | 2017-10-18 00:00:00 |
| Date Available | 2017-10-18 00:00:00 |
| Creation Date | 2017-09-04 20:42:59 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-10-18 09:20:25 |
| Document Title | Ring Video Doorbell Setup and Installation Guide |
| Document Creator | Adobe InDesign CC 2017 (Macintosh) |
| Document Author: | Ring.com |
Home security beyond the front door Motion Detector Ring Video Doorbells began a Ring of Security around your entire property. Ring Protect is the security system that takes the Ring of Security a step further giving you another level of protection for your property. Now, you can arm and disarm your system, prevent crime and protect your home - all from your phone, tablet or PC. Contents 1. Diagram 2. In-app Setup 3. Connecting the Device 4. Physical Installation 1. Say hello to your Ring Motion Detector. Diagram Detector LED Ring Mounting bracket 2. S et up your Ring Motion Detector in the Ring app. Set up your Ring Motion Detector near your Base Station In the Ring app, choose Set Up a Device. Choose Sensors, then Ring Motion Detector. 3. Connect your Ring Motion Detector to your base station. Scan the QR Code or enter the S2 PIN The QR Code and PIN can be found on the back of your device, on the box, or on the card in this box. 27472 5. Troubleshooting Ring_Motion_Detector_Manual.indd 9 9/4/17 8:43 PM This connects the battery and turns on the device. Your base station will find it. 12345 Ring_Motion_Detector_Manual.indd 18 Track the connection progress of the sensor Your sensor will try to connect to your base station. The sensor’s LED ring will show you the progress. Waiting to connect Blue Blinking (30 sec) Connected Blue Solid (5 sec) Couldn’t add to base station Blue Blink (5x, quick) Motion detected Blue Blink (1x) Sensor tampered Blue Blinks (3x) 4. Install your Ring Motion Detector on the wall. Place your detector (but don’t install it yet) Hold the detector where you want to install it. Make sure the detector detects motion in the whole area. Install your detector. Use the bracket and tape or screws included in your kit. The detector can be mounted flush to the wall or angled in a corner. View detector history in the Ring app You should have a few history events from installing your detector. Check your app to make sure it’s working. 5. Some additional details about your detector. How to change the battery Your battery should last quite a long time, but when you need to replace it, press the clip and remove the detector cover. © 2017 Ring Inc. RING, ALWAYS HOME, and CHIME are trademarks of Ring Inc. Last updated: 09/04/17 Pull the tab on the detector 9/4/17 8:43 PM 1523 26th St. Santa Monica, CA 90404 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B) – This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The FCC ID of the device in this package can be found on the back or bottom of the device. CAUTION To reduce the risk of electrical shock, DO NOT open the unit. There are no user serviceable parts inside the unit. Refer to customer support for any repairs. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same of equivalent type recommended by the manufacturer. Dispose of the used batteries according to the manufacturer’s instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Ring_Motion_Detector_legal.indd 1 9/11/17 6:55 PM Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Protect the device from direct sunlight. Install the device at dry locations, and protect it against rain and humidity. The device may not get in contact to salt water or other conductive liquids. The device must be charged only within a building in a dry state. This device may not be disassembled and used for any other purpose. This unit, and all the components are configured for the sole purpose of providing a security. They are not approved for individual cellular use, battery use or other mishandling. A mobile app must be used to set up the device. This device is not an Access point or Hotspot and should not be used as one. Ring_Motion_Detector_legal.indd 2 9/11/17 6:55 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Ring.com Create Date : 2017:09:04 20:42:59-07:00 Modify Date : 2017:10:18 09:20:25-07:00 Subject : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com Has XFA : No Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Title : Ring Video Doorbell Setup and Installation Guide Creator : Ring.com Description : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com Metadata Date : 2017:10:18 09:20:25-07:00 Rating : 5 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:626e4c85-06ef-4491-8b6a-2f306e805d6c Original Document ID : xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb Document ID : xmp.id:faa2a7cf-c2b5-4b71-89e2-1d0d66601e18 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:87d04955-06f8-4df7-b41b-2965ebdf90a6 Derived From Document ID : xmp.did:c6397680-8939-48dc-8e16-1f851fd127b6 Derived From Original Document ID: xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:09:04 20:42:59-07:00 Marked : True Authors Position : Setup and Installation Guide Producer : Adobe PDF Library 15.0 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 4EXIF Metadata provided by EXIF.tools