Edco Electronics BTSPK26 Bluetooth speakers User Manual Users manual
Edco Electronics Inc. Bluetooth speakers Users manual
Users manual
Portable Bluetooth
Stereo Speaker
BTSPK26
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE
OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions carefully.
2. Keep these instructions in a safe place.
3. Follow all instructions.
4. Do not use this product near water.
5. Cleaning: Do not use liquid cleaners or aerosol cleaners. Clean only with a dry damp cloth.
6. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that
produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such
as liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not
operate normally, or has been dropped.
9. This product shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be
placed on or near the product.
10. Object Entry: Never push objects of any kind into this product through the openings.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
WARNING
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired
operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful
communication.
This device complies with Canadian ICES-003 and RSS-210
Thank you for your purchase.
Please visit our website at www.borne-lifestyle.com.
LOCATION OF CONTROLS
CHARGING THE SPEAKER
Using the Charging Cable provided, plug the Micro USB Tip into the Micro USB Charging Port and plug the
other end (USB Tip) into a USB port on your computer or USB wall charger (not included). A red LED indicator
light will illuminate while charging and turn off when completed.
A full charge will take approximately 4 to 5 hours.
5. Mode Button
6. LED Bluetooth Indicator Light
2. Volume Increase/Skip Forward Button 7. Micro USB Charging Port
3. Play/Pause Button 8. AUX-IN/Line in Port
4. Volume Decrease/Skip Backward Button 9. OFF/ON Switch
1. Call Answer/End Button
10. LED Charging Light
Product and Battery Disposal
This product contains a built-in lithium battery and should not be disposed of in normal household waste. The
battery in this device is not intended to be removed by the individual or end user. For disposal and recycling,
please contact your local waste management authorities. The recycling and processing of electronic waste will
make a significant contribution towards helping protect the environment.
Warning: To reduce the risk of fire and burns, do not disassemble, crush, puncture, short external contacts or
dispose of in fire or water.
POWER ON/OFF
To turn on and off the speaker, slide the ON/OFF Switch to either position.
BLUETOOTH MODE
Pairing a Bluetooth Enabled Device for the First Time
NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and connecting
Bluetooth devices.
1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing process.
2. Slide the ON/OFF Switch to the ON position. You will hear an alert tone and the LED Bluetooth
Indicator Light will start to flash. If you do not see the Bluetooth Indicator Light flashing, press the Mode
Button.
3. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth devices.
When the search is complete, select “BTSPK26” from the Bluetooth device list.
4. When the Bluetooth connection is successful, you will hear an alert tone and the LED Bluetooth
Indicator Light will stop flashing and stay solid. This means you are connected and the speaker is ready
for use.
NOTE:
If pairing was unsuccessful, turn off the unit and repeat the steps above to re-pair again.
After successful pairing, paired devices will remember each other. Unless pairing information is deleted,
re-pairing is not required after the first time.
If you want to pair the unit with other Bluetooth enabled devices, please disconnect the existing device
and pair with the new device according to the steps above.
5. To increase or decrease the volume on the speaker, press and hold the Volume Increase or Volume
Decrease Button.
6. To skip songs forward or backward, press the Skip Backward or Skip Forward Buttons.
7. To pause and resume playback, press the Play/Pause button.
HANDSFREE SPEAKERPHONE
While the speaker is on Bluetooth Mode and successfully paired to your smartphone, you can answer phone
calls through this speaker and use it as a speakerphone.
Press the Call Answer/End Button and to pick up and hang up a phone call.
AUDIO LINE IN MODE (AUX-IN)
This speaker has an audio line in (aux-in) feature to connect your smartphone, MP3 player or other digital
music players.
After you turn on the speaker, connect an audio line in / aux-in cable (not included) into the AUX-IN/Line in Port
to your smartphone, MP3 player or other digital music player. Press the Mode button to activate the Aux-in
Mode.
Need help? Please call us.
If you encounter any difficulties with this product, please call or email us and our
representatives will be ready to help you.
Toll free: 1-800-593-6669 (Monday to Friday: 9am – 5pm EST)
Email: support@borne-lifestyle.com
Thank you for your purchase. We want you to start enjoying your product.
LIMITED WARRANTY
Warning: Some Products may contain components that are small enough to be swallowed. Keep out of the reach of
children.
Before returning your Product for service under this Warranty, (i) please read the instruction manual carefully and visit our
website at www.borne-lifestyle.com for product updates and extended support documentation (e.g., Frequently Asked
Questions, Common Troubleshooting Guides); (ii) please contact Borne Electronics Support if you are still having trouble
with your Product.
Subject to the terms and conditions herein, Borne Electronics warrants to the original purchaser of the Product
(“Customer”) that the Product will be free from defects in material or workmanship under normal, noncommercial use
(“Defects”) for a period of 1 year.
Warranty Period encompasses separate “Coverage Periods” for Parts and Labor, with each Coverage Period to begin
from the original date of Customer purchase. Parts are covered for a period of 1yr. Labour is covered for 90 days. If
Customer returns a defective Product during the applicable Warranty Period, Borne Electronics will, at its option during
the specified Coverage Periods for Parts and Labor (as applicable), either: (i) repair the Product or (ii) replace the Product
with a new or refurbished Product, in either case free of charge to Customer for Parts and/or Labor (as applicable) during
the specified Coverage Period only, and excluding applicable shipping charges for which the Customer is responsible.
The foregoing states the Customer’s exclusive remedy and Borne Electronics’ sole liability for breach of the limited
warranty contained herein.
This Warranty specifically excludes any Product (or, as applicable, any component thereof) that has Defects resulting
from: (a) any neglect or misuse by a Customer, an accident, improper application, violation of operating instructions for
the Product, any other Customer-induced damage, or the alteration or removal of any Product serial number; (b) any
modification or repair to Product by any party other than Borne Electronics or a party authorized in writing by Borne
Electronics; (c) any damage to Product due to power surges, incorrect electrical voltage, misconnection to any device, or
malfunction of any device used with the Product; (d) cosmetic damage to the Product caused by normal wear and tear; (e)
shipping damage that occurs while the Product is in transit; (f) damage caused by heat sources, sunlight, electromagnetic
conditions, or other climatic conditions; or (g) any acts of God.
Product is sold to Customer for personal, non-commercial use only. Product is not warranted for Customer’s commercial
or rental use. In addition, Product is not warranted against failure, and should not be used by Customer for any application
where (i) there is a risk that any data stored on Product will be breached or otherwise compromised, or (ii) the data stored
on Product is relied upon for medical or lifesaving applications. Borne Electronics expressly disclaims any warranty for
any of the foregoing uses to the fullest extent permitted by law. Customer assumes any and all risks associated with such
uses of Product, and agrees to indemnify Borne Electronics for any damages claimed against Borne Electronics for such
uses.
This Warranty specifically and expressly excludes any Product that is purchased by Customer as a “floor” or “display”
model. Any such Product is purchased by Customer “AS IS” and Borne Electronics disclaims any Warranties, express or
implied, in relation thereto.
EXCEPT FOR THE EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY
LAW, THE PRODUCT IS PROVIDED “AS IS”, AND BORNE ELECTRONICS DISCLAIMS ALL OTHER WARRANTIES,
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF (I) MERCHANTABILITY, (II) FITNESS FOR A
PARTICULAR PURPOSE, OR (III) NON-INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL BORNE ELECTRONICS BE LIABLE TO CUSTOMER OR
ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE
DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF
ANY DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING
NEGLIGENCE). ADDITIONALLY, EVEN IF BORNE ELECTRONICS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES, BORNE ELECTRONICS’ AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL DIRECT
DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO THE CUMULATIVE PRODUCT COSTS PAID BY
THAT CUSTOMER FOR THE PRODUCT CAUSING SUCH DAMAGES, IF ANY.
This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to
jurisdiction.
To obtain Warranty service, Customer must call Borne Electronics Support prior to making a Product Return.
Customer must include with Product Return the following items: (i) a dated sales receipt that indicates the place of
purchase, model number of Product, and amount paid; (ii) a detailed description of Customer’s problem with Product; (iii)
Customer’s full name, phone number, and return address, and; (iv) a money order for any applicable shipping costs made
out to Edco Electronics Inc. to cover return shipping charges to US and Canadian destinations only. Borne Electronics will
not make return shipments to a P.O. Box. For shipping to international addresses, actual freight will be charged to
Customer. Failure to enclose any of these items may delay the processing of your Warranty claim. Return your Product
freight-prepaid in its original packaging, or packaging that affords an equal measure of protection. Please allow 4 to 6
weeks for the processing of your claim.
Edco Electronics Inc.
8484 Esplanade
Montreal, Quebec H2P 2R7
Canada
Toll Free: 1-800-593-6669 (Monday to Friday: 9am to 5pm EST)
Email: support@borne-lifestyle.com
.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.