Edco Electronics BTSPK36 Bluetooth Speaker User Manual 2
Edco Electronics Inc. Bluetooth Speaker 2
User manual
①
②
③
④
⑤
⑥
①ON/OFF
②Single click: play, pause
③V+/NEXT
④V-/PREV
⑤Hands-free call
⑥USB recharge port
③Long press to increase the volume,
Short press for next song.
④Long press to decline the volume,
Short press for above song.
②Short press to pause playing music.
⑤Also if you have a call, press this button to hang up or hang
on the phone.
can search for “Q50" on your phone to pair, after connected
successfully, you can play music; If you want to switch pairing
other mobile devices need to cut off the connection of existing
equipment into pairing mode;
1.Product size:98x88x43mm
2.Metal: ABS
3. DC: Built-in rechargeable Lithium-ion battery 300mAh
4.BT distance: 10m
5.Frequency response range: 280Hz-20KHz
6.Sensitivity:80db+2db
7.Speaker:Φ45mm 4Ω3W
8.Playing time:2-3 hrs
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
IC STATEMENT
This device complies with Industry Canada’s licence-
exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts d
e licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire d
e brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le b
rouillage est susceptible d'en compromettre le fonctionnement.