Edco Electronics MS670B BLUETOOTH CD STEREO SYSTEM User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3885653
Application ID	iPqI4akcuceoPL3EBaGDEw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.6kB (219944 bits)
Date Submitted	2018-06-13 00:00:00
Date Available	2018-06-13 00:00:00
Creation Date	2018-06-07 19:23:50
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-06-07 19:27:04
Document Title	Microsoft Word - MS670B0 manual_EN说明书.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	toby855

BLUETOOTH CD STEREO SYSTEM
User manual
MODEL: MS670B
Please read carefully this manual before operating the device. Keep it for future reference.
Table of content
Table of content .................................................................
Safety information ..............................................................
Location and player functions ............................................
Installation ..........................................................................
Remote control...................................................................
Operation ...........................................................................
Basic operations ...................................................
Tuner operation .....................................................
CD/MP3 operation ................................................
USB/SD operation .................................................
LED display ...........................................................
Troubleshooting .................................................................
Specifications .....................................................................
Safety information
Always read the safety instructions carefully. Keep this user’s manual for future
reference.
Lay this equipment on a reliable flat surface before setting it up. Do not let it on soft
furniture.
When the power plug is used as the disconnect device, the disconnect device shall
remain readily operable.
The device shall not be exposed to dripping or splashing and objects filled with
liquids such as vases shall not be placed on the device.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine or fire.
If any of the following situations arises, get the equipment checked by a service
technician:

The equipment has been exposed to moisture.

The equipment has been dropped and damaged.

The equipment has obvious sign of breakage.

The equipment has not been working well or you cannot get it work
according to the user’s manual.
Warning
To prevent any risk of electric shock, do not open the cover or the back of the
receiver.
Do not block the ventilation holes of the device. Leave appropriate gaps above
and around it to allow for adequate ventilation.
Do not place the device in an unventilated cabinet or on top of a unit which emits
heat.
Copyright statement
No part of this publication may be reproduced in any form by any means without
prior written permission. Other trademarks or brand names mentioned herein
are trademarks or registered trademarks of their respective companies.
The lightning flash with an arrowhead symbol within an equilateral
triangle is intended to alert the user of the presence of not insulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
Laser
This player employs a laser system of class 1.
1. Make sure the device is shut down prior to opening player lid.
2. Do not open the device. Do not attempt to dismantle the device.
3. In order to avoid any danger: have service work only carried out by the
manufacturer or an authorized service workshop.
4. There is a visible laser radiation when the device is open.
5. The use of other remote controls or adjustments or different procedures than
those specified herein may result in hazardous radiation exposure.
Location and player functions
Front view
A. STANDBY: press it to enter the standby mode.
VOL-/VOL+: press it to adjust the volume.
MODE: in working mode, press to select the different mode, such as CD, USB, FM
radio, Bluetooth and AUX mode.
: In media play mode, press shortly to skip to the next/previous track. In FM
mode, shortly press to enter manual search and hold press to half-auto search.
: in media play mode, press to the play/pause the play. In FM mode, press to
enter auto search.
: press to open the disc tray.
B. LCD display and remote sensor.
Side view
C. Earphone jack
AUX-IN jack: auxiliary input 3.5 mm jack.
FM ANT: it is used to receive radio signal.
D.
DC 5V – 2A power socket
E.
USB interface
Installation
For table top use
The stand has to be attached to the main unit for table top use.
For wall mounting
Remove the stand from the main unit.
Make sure the marks are level before drilling.
Drill the holes on the marks.
See the illustration below.
Remote control
: press to turn on or off the unit.
/AUTO: press to play/pause the playback. In tuner mode, press to start auto
searching.
: in media play mode, press to stop play.
REM: in FM radio mode, press to store the station into memory.
CH- : in media play mode, press shortly to skip to the next track. in FM radio
mode, press to select channel down.
CH+ : in media play mode, press shortly to skip to the previous track. in FM
radio mode, press to select channel up.
EQ: press it to turn on equalization function and to select desired audio mode.
TUN- : in FM radio mode, press to select channel down. Press it shortly to select
frequency step by step down in radio mode. Press and hold it to seek the frequency
backward automatically.
TUN+ : Press it shortly to select frequency step by step up in radio mode. Press and
hold it to seek the frequency forward automatically.
Numeric buttons (1-5+): press to input numbers to select the track or channel.
MUTE: press to mute/resume the sound.
VOL+/VOL-: press to adjust the volume level.
RAN: in CD mode, press to random playing.
REPEAT: in media play mode, press to select repeat one, repeat folder, repeat all.
MODE: press to select the different modes, such as CD, USB, FM radio, Bluetooth
and AUX mode.
Inserting the battery
Open the battery compartment cover.
Insert the new battery (button cell lithium battery CR2025, not including). Make sure
that the positive and negative poles are respected.
Close the cover.
Using the remote control
For best results, point the remote control towards the remote control signal receiver
on the player front panel. Stay within 5 meters and an angle of 60 degrees or less.
Remove battery during storage or when you are not using the player for a long time.
Notes:
Low batteries can leak and cause damage to the remote control.
Remove the battery from the battery compartment as soon as it is
low, or if the remote control is not going to be used for a long period
of time.
Operation
BASIC OPERATIONS
Switching on/off the unit
Press
button on the player or on the remote control to turn on the unit. When the
unit is on, press
button to turn the unit off.
Mute
Press MUTE button to mute the sound instantly. Press it again will resume the
sound.
Volume adjustment
Press VOL-/VOL+ buttons on the remote control or the player to increase or
decrease the volume level.
Equalization
Press EQ button on the remote control to turn on equalization function and to select
desired audio mode. There are several kinds of mode as below:
→ POP →ROCK → CLASS → FLAT→ JAZZ → VOCAL → OFF
Function mode selection
Press MODE button on the player or on the remote control to select the desired
mode, such as CD, USB, FM radio, Bluetooth and AUX-IN mode.
Auxiliary input
The unit can be connected to a portable audio player through the AUX-IN jack on
the back of the unit. After finishing the connection, you can press MODE button on
the player or on the remote control to switch the mode to AUX mode.
TUNER OPERATION
Switching to tuner mode
Press the MODE button on the player or on the remote control to select the tuner
mode. If you use the first time the radio, you should start to search the FM radio
stations.
Auto searching
Press and hold
on the player or on the remote control to start the searching
automatically. And it will stop after one cycle searching completed. You can press
button to stop searching.
Press and hold
buttons on the player or on the remote control to start
select radio stations half-automatically.
Manual searching
Press
buttons once to adjust the frequency step by step manually.
Selecting channel
Press the CH+/CH- buttons on the remote control to select channel up or down.
You can use the 0+5，numeric buttons to input the stations number and select the
desired station directly.
Store into memory
Press the REM button on the remote control to store the station. If you have
searched a radio station by search, you can store it into memory by pressing REM
button. Press the
buttons on the remote control to store the station.
CD/MP3 OPERATION
Switch to CD mode
Press PUSH to open the disc cover, then gently place the CD/MP3 disc with the
printed side uppermost on the disc compartment and then close the disc cover.
Keep pressing the MODE button on the player or on the remote control to select CD
mode.
Select tracks
Pressing
will skip to the previous/next track. Track number will be
showed on the display.
Pause playing
Press
button on the player or on the remote control to pause the player. Press it
again to resume playing.
Stop playing
Press
button to stop the player. Press
to play from the start.
USB OPERATION
On the left side of the main unit, you will see the USB interface.
This player plays MP3 that are stored on USB device
Connect the USB drive to the USB port on this player.
Press MODE button to select USB mode. A contents menu is displayed and play
starts.
Select a file to play if play does not start automatically.
Notes:
The maximum current for the USB port should be 500 mA. The product will
automatically enter into protecting status and the USB device would stop working
once the USB consumption exceeds 500 mA.
BLUETOOTH OPERATION
1. Press the MODE button to select Bluetooth mode.
2, Use your Bluetooth device to scan and pair with this player. The pair name is
MS670B.
3, Play your desired music from your Bluetooth device.
IC Warning
- English: "
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
- French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement."
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotopically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : toby855
Create Date                     : 2018:06:07 19:23:50+08:00
Modify Date                     : 2018:06:07 19:27:04+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:06:07 19:27:04+08:00
Format                          : application/pdf
Title                           : Microsoft Word - MS670B0 manual_EN说明书.doc
Creator                         : toby855
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:fb4c54b0-cac6-4064-8e2f-7dad71bd2cbf
Instance ID                     : uuid:e772dfaf-8292-4b5f-890f-bf74c9f5a7f0
Page Count                      : 15

EXIF Metadata provided by EXIF.tools