Edgestar DEP301EW User Manual DEHUMIDIFIER Manuals And Guides 1305471L
User Manual: Edgestar DEP301EW DEP301EW EDGESTAR DEHUMIDIFIER - Manuals and Guides View the owners manual for your EDGESTAR DEHUMIDIFIER #DEP301EW. Home:Heating & Cooling Parts:Edgestar Parts:Edgestar DEHUMIDIFIER Manual
Open the PDF directly: View PDF 
.
Page Count: 17
| Download | |
| Open PDF In Browser | View PDF |
EDGESTAR _ Dehumidifier Model: DEP301EW Owner's Manual For more information on other great EdgeStar products on the web, go to http://www.edgestar.com Important Safety Information Improper handling can cause serious damage to the EdgeStar dehumidifier and/or to the user. This dehumidifier is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet. Please read and follow the safety information listed below. /_Electrical Safety _ This dehumidifier is designed for indoor use only Do not use the unit near bath tubs, swimming pools or other bodies of water • Do not wet the housing or control panel • Do not exceed the power outlet ratings • Do not pull the unit by the cord • Always turn the unit off and unplug it from the outlet when cleaning • Unplug the unit if it is not going to be used for an extended time period • Do not operate the unit with a power plug missing the ground plug, a damaged cord or a loose socket • • • • • • • • _. Be sure the dehumidifier is properly grounded Never plug or unplug the unit with wet hands /_General Safety _'_ This unit is not intended children to be used by Children should be supervised to ensure that they do not play with this product Do not allow children to play with the controls or drop any objects into the air outlets or vents • Care should be taken when using the unit in a room with infants, elderly persons, and children • Do not objects Do not Do not Do not • • • place flower vases, on top of the unit allow anyone to sit climb on or use the cover the air intake with towels, air flow clothes containers, or any on the unit unit as a step or exhaust vents or materials that prevent Do not bypass, cut or remove the grounding plug Do not use extension cords or power strips with this unit You may need to contact your electrician if it is necessary to use a longer cord or do not have a grounded outlet Do not modify the power cord's length or share the outlet with other appliances It is recommended the unit be connected on its own circuit • When using in closets or confined sure to keep doors open to allow ventilation • Do not use this appliance near flammable gas or combustibles, such as gasoline, benzene, thinner, etc Do not use in areas where chemicals are handled Do not start or stop the unit by switching the circuit's power on and off If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician Never open the unit while it is plugged in Immediately unplug the unit if it makes strange sounds, emits smells or smoke comes out of it, and contact customer • service • • • • • spaces, proper be Do not place the unit near a heat source as doing so may cause the plastic parts to melt Only use in an upright position on a flat, level surface and provide at least 10 inches of clearance from any walls or objects Route the power cord carefully to avoid creating a tripping hazard When using in closets or confined spaces, be sure to keep doors open to allow proper ventilation Clean the filters every two weeks or as j is not potable or suitable for drinking. Do not drink or use condensate or wafer The waferfrom produced dehumidifier drained the unit by as the if contains contaminates and could make you sick 21 \._:_/ Electrical products should not be disposed of with household waste Please contact your local recycling center for more information on how to recycle electronic waste Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. INTRODUCTION ................................................................................................... PARTS IDENTIFICATION ..................................................................................... BACK VIEW .......................................................................................................... FRONT VIEW ......................................................................................................... INSTALLATION INSTRUCTIONS 2 2 CONTROL PANEL OVERVIEW ............................................................................ 4 OPERATING THE CONTROL PANEL ................................................................. 5 CONTINUOUS MODE ............................................................................................. 5 5 5 5 FAN SPEEDS.......................................................................................................... 5 SETTING THE HUMIDITY LEVEL ................................................................................... 5 LCD DISPLAY ....................................................................................................... Error Codes .................................................................................................. 6 6 WATER FULL LIGHT ................................................................................................. 6 ADDITIONAL 6 NOTES ABOUT THE DEHUMIDIFIER'S BEHAVIOR: ......................................... DRAINING THE UNIT ............................................................................................ MANUAL DRAIN .................................................................................................... CONTINUOUS DRAIN ............................................................................................. MAINTENANCE .................................................................................................... 7 7 7 8 CLEANING THE UNIT ............................................................................................... 8 CLEANING THE PRE-FILTER....................................................................................... 8 CLEANING THE WATER BUCKET ................................................................................ 8 PREPARATION FOR STORAGE .................................................................................. 9 ENERGY SAVING GUIDE ..................................................................................... 9 TROUBLESHOOTING 9 SPECIFICATIONS Dehumidifier 2 3 A uto-Restart: ................................................................................................ Auto-Shut Off: .............................................................................................. Portable 1 ........................................................................ POWER ................................................................................................................ EdgeStar I .......................................................................................... ............................................................................................... 12 ii Introduction Thank you for purchasing this EdgeStar portable dehumidifier. We are glad you chose us. We believe fhaf your purchase of this product opens a relationship between you and EdgeSfar. We will provide the customer support needed fo nurture fhaf relationship. This manual contains important information regarding the proper installation, use and maintenance of your portable dehumidifier. Following this manual will ensure that your product will work at its peak performance and efficiency. Your dehumidifier is designed to remove moisture in the air by condensation removal and collecting the wafer in a removable bucket, or draining into a drain hose fhaf can be routed fo a drain hole on the floor or condensate pump. Please save the original product packaging transport your portable dehumidifier. in case you need to safely For Your Records: Please write down the model number and serial number below for future reference. Both numbers are located on the ratings label on the back of your unit and are needed fo obtain warranty service. You may also want fo staple your receipt fo this manual as if is the proof of your purchase, and is also needed for service under your warranty. Model Number: Serial Number: Date of Purchase: To better serve you, please do the following service: before contacting immediately customer • If you received a damaged product, dealer that sold you the product. • Read and follow this instruction use and maintain your portable • Read the troubleshooting section of this manual diagnose and solve common issues. • Register your product at http://www.edgestar.com and download product guides, owner's manuals, and access additional troubleshooting resources. • If you need warranty service, our friendly customer service representatives are available via email af service@edgestar.com or by telephone af 1 (866) 319-5473. manual carefully dehumidifier. contact the to help you install, as it will help you Parts Identification Front View Control Panel Handle Air Intake Water Bucket Water Level Indicator Back View Exhaust Drain Plug Power Plug Casters EdgeStar Portable Dehumidifier 2 Installation Instructions Your dehumidifier will remove moisture from the air and collect the excess wafer in a bucket. You can use the EdgeSfar dehumidifier fo create a comfortable environment and prevent damage caused by moisture fo books or valuables in areas such as basements or home libraries. Follow f the instructions Note: Dehumidifiers working in a basement will have little or no effect on adjacent enclosed rooms such as closets, unless there is enough circulation of air in and out of the enclosed area. The unit is designed to work in environments with temperatures between 41°F and below fo unpack and set up your unit. 1) Carefully unpack the dehumidifier from its box and packaging material, and remove the adhesive tape holding the wafer bucket and filter in place. You may want fo save the box for storing and transporting the unit. Let the unit sit upright for af least 24 hours before powering if on fo allow the compressor's fluids fo settle. 2) Place the dehumidifier on a level floor or surface that is strong enough fo support the unit with a full bucket of wafer in a room where the ambient temperature will not drop below 41°F, and away from any heat sources such as direct sunlight, heaters, radiators, dryers, etc. Allow at least 10 inches of space of space above the unit. all around the unit and at least 20 inches 9qOF 20 10_ f Caution: The unit is designed to be used indoors and freestanding, and not be used outdoors, or be built-in fo a cabinet or used under a counter. If you have multiple power outlets in the room, choose one that is near the dehumidifier and fhaf will be able fo provide adequate power fo the unit. See the power requirements listed on the product label printed on the side, or on the back of your dehumidifier. 3) Close all windows and doors. To be most effective, use the dehumidifier in a contained room. For example, use if in a room with four walls and a ceiling, instead of a partitioned studio, or warehouse. 4) To activate the unit and ensure the warning switches are engaged, remove the water bucket and reinstall it; otherwise, the unit may not work properly. 5) Plug the unit in to a grounded section.) outlet. (Read the Safety Information 6) When first using the unit, press the Power button on the top of the unit and run if in continuous mode for 24 hours. Control Panel Overview Filter o Turbo o Ful cD Normal cY_ Cont. c] On c_ Off c_ Autodeffost o Timer Button Function The check filter feature is a reminder fo clean the air filter for a more efficient operation. The Filter light will illuminate after 250 hours of operation. To reset after cleaning the filter, press the Filter button and the indicator light will shut off. (_ ets not the be unitable fo run continuously until the wafer humidify bucket isbuttons. full. You will fo use the increase/decrease Sets the fan speed moisture removal. from normal fo turbo for your desired level of Powers the unit on or off. (_ Increases the desired relative humidify setting for damper air. Note: The unit is not a humidifier; using the increase humidify button will not add moisture fo the air. Decreases the desired relative humidify setting for drier air. Pressthe to initiate autodecrease start and buttons. auto stop feature with increasetheand Indicator EdgeStar Portable Dehumidifier Light in conjunction Function Filter Lights up to indicate Full The water full light will light up red if the unit has filled the water bucket. the filter needs to be cleaned. Cont. Lights up when the unit is set to run continuously the water bucket is full. On/Off Lights up to indicate if the unit is in on or off position. Turbo Lights up to indicate the fan is on the high setting. Normal Lights up to indicate the fan is on the low setting. Auto-Defrost Lights up to indicate the auto defrost LCD Display Displays the level of humidity operation until is on as well as error codes. 4 Operating the Control Panel Use the "Power" button to turn the portable dehumidifier on and off. By default when you first use the power button, the unit will begin fo operate in normal fan speed mode. Power Note: If the unit was powered if back on. off, waif af least 3 minutes before powering Auto-Restart: If power fo the unit is interrupted, the dehumidifier will restart itself in with the last used mode/settings once the power is restored. The compressor will restart after 3 minutes. Auto-Shut Off: The unit will shut off when the set humidify has been reached, or when the wafer bucket is full, has been removed, or is not in its proper Continuous position. Continuous continuous Mode mode dehumidifies mode for maximum use the set humidify the air until the wafer bucket is full. Use the dehumidification. You will not be able fo buttons. To operate the unit in continuous mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the "Power" button. 3) Press the "Conf." button. The LED indicator next fo "Conf." 4) Select the fan speed by using the Normal or High button. The dehumidifier has two fan speeds. Use the turbo fan speed for maximum moisture removal. Use the normal fan speed for quieter operation. Fan Speeds Select the fan speed illuminated Setting the Humidity will light up. Level by pressing the "Fan" button until desired mode is The desired humidify level can be set within a range of 35% Relative Humidify (RH) fo 80% RH in 5% increments. f Note: Relative Humidity (RH) is the ratio of the actual wafer content of the air at a given temperature to the potential water content af fhaf same temperature. ]) Make sure the power cord is plugged into a power outlet. 2) Press the Power button. Make sure the "Conf." light is fumed off. 3) Press the "Increase" and "Decrease" buttons fo set the desired humidify To set After the desired humidify the levelLCD percentage: level. a few seconds, display will revert fo the acfuat room humidify level with +5% accuracy. For drier air use the "Decrease" button. Operating the Control Panel continued The LCD Display will show the room's relative humidity percentage by default. Pressing the Increase and Decrease buttons will show the set humidity for a few seconds, and then revert to the room's relative humidity. LCD Display Error Codes In addition to showing the humidify, error codes: the display may show the following AS - Humidity sensor error Power the unit off, and then unplug the unit for 15 minutes. Plug in and power on. If the issue persists, please contact customer service. ES - Temperature sensor error Power the unit off, and then unplug the unit for 15 minutes. Plug in and power on. If the issue persists, please contact customer service. EC - Unit malfunction Please make sure whether the ambient temperature is suitable for the stated temperature in the manual or not. If not, please operate the unit under the stated temperature. If the environment temperature is suitable for the stated temperature, please contact customer service. P2- Bucket is full Empty the water bucket and reinstall it. The Water Full Light will illuminate when the bucket is ready to be emptied. The light also turns on when the bucket is not installed or installed incorrectly. Once the wafer is drained, and the bucket is properly installed, the unit will operate normally. Water Full Light Additional notes about the dehumidifier's • • • EdgeStar Portable Dehumidifier behavior: Once the unit reaches the desired set humidify, the power button will remain lit while the compressor and fan shuts off. You will not be able fo change the fan speed. If the power fo the unit was interrupted while the compressor was running, the unit may take a few minutes to start the fan and compressor. If the room's relative humidity is lower than the set humidity, the unit will not start the fan and compressor unless you set the unit to run in Continuous mode. 6 Draining Manual Drain the Unit The dehumidifier can be drained manually the bucket is full, the unit will automatically light will turn on. Follow the steps fo remove the bucket 1) Slowly and carefully pull the bucket out by the handles until you see the bucket handle. using the water bucket. When stop running, and the wafer full and dump the wafer. 2) Pull the bucket handle up by its @ Warning: The wafer produced the dehumidifier is not potable suitable for drinking. Do not drink the wafer drained from the unit as if contains contaminates and could make you sick. Continuous Drain by or 3) Pour the water out. Do not place uneven and will fall down. 4) Reinstall the bucket. The dehumidifier ]) Remove connector. can be drained the bucket continuously on the floor as its bottom is fo a floor drain. the water bucket from the unit, and you will find a hose You can use a ]2 mm hose fo attach fo the connector. Connector Drain / hose 2) Remove the rubber plug from the back of the unit's drain hose outlet, and push the drain hose through. 3) Securely attach the drain hose fo the connector. Lead the other end of the hose fo a floor drain or other suitable drainage port. 4) You must reinstall the wafer bucket. Maintenance Clean the dehumidifier and filters regularly to maintain performance efficiency, and prolong the unit's life. Be sure to always unplug the dehumidifier from the power outlet before cleaning. Cleaning the unit and Use a soft dry cloth to wipe the body clean. If necessary, use lukewarm water to dampen a cloth to clean the unit. Use a soft bristle brush and vacuum cleaner to clean between the air intake and exhaust vents. Never use abrasive chemicals, volatile substances, gasoline, detergents, chemically treated cloths, or other cleaning solvents that may damage the cabinet exterior. Never spray water directly Cleaning the pre-filter on the unit. Clean the pre-filter periodically to prolong the unit's life, and keep the unit running efficiently. Lint, dust, and dirt can clog the unit and reduce its performance and effectiveness. If the unit is used in a dusty environment you may need to clean it on a weekly basis. To clean the pre-filter, follow the steps below: 1) Power off the unit and remove the pre-filter. -ZT [ NOTE: Do not put the filter in a dishwasher. ................................................ ZZ "Z'ZI-ZZZi dirt, then rinse thoroughly under lukewarm running water (below 104°F). 2) Use a vacuum cleaner or tap the filter lightly to remove loose dust and You may use a mild soap and water solution if needed. Allow the pre-filter to air dry in a cool and shaded place. Dry thoroughly before reinstalling. 3) Reinsert the pre-filter. Warning: Never operate Cleaning the water bucket Wash the water bucket mildew and mold. the unit without frequently the air filter. to prevent the growth of bacteria, To clean the water bucket, follow the steps below: 1) Remove the wafer bucket from the unit. bucket in a NOTE: Do notdishwasher. put the wafer EdgeStar Portable Dehumidifier 2) Wash thoroughly. the bucket with clean wafer and a mild detergent. bucket 3) Install the wafer bucket. Rinse the 8 Maintenance Preparation for Storage continued If you are not going to be using fhe unif for an exfended follow fhe insfrucfions below before sforing your unif: ]) 2) 3) 4) 5) 6) period of time, Turn off fhe unif and waif 24 hours before empfying fhe wafer lank. Drain all fhe wafer from fhe wafer lank. Clean fhe air filler, wafer lank and unif. Unplug and carefully wind fhe power cord. Cover fhe unif wifh a plastic bag. Sfore fhe unif in an uprighf position in a dry, well-venfilafed place. Energy Saving Guide Read and follow fhe guide below fo gel fhe besf performance and efficiency from your porfable dehumidifier: • Do nor cover fhe air ouflef (exhausf) while in use. • Do nor place fhe unif in fronf of curfains or drapes- fo ensure fhey do nor obsfrucf fhe air infake. • • • • • • • Keep curfains, blinds or drapes closed during fhe sunniesf parr of fhe day. Close all windows and doors. Indoor relative humidify should ideally be kepf befween 35 and 60 percenf depending on fhe ambienf femperafure. Make sure fhe unif is on a level surface. To prolong fhe compressor's life, please waif af leasf 3 minufes before fuming fhe unif back on affer shuffing if off. Inspecf and keep fhe pre-filfers clean by cleaning regularly. Perform roufine mainfenance. Troubleshooting Follow the troubleshooting chart fo resolve common Possible Cause Issue Insufficient time fo dry Air intake or Exhaust vents are blocked My dehumidifier not dry the air does Humidify control may not be set low enough Opened doors windows or Room temperature is too low (below 41°F) There is a kerosene heater or something giving off wafer vapor in the room Frost appears coils on the This is normal behavior Unit is not receiving power Insufficient power My dehumidifier is not functioning at all Water bucket is full Water bucket is not in proper position Control panel is disconnected The unit is not level My dehumidifier is making a loud noise A foreign object has jammed the fan The floor below is uneven the unit Air filter is clogged My dehumidifier is making a continuous metallic knocking or pinging sound EdgeStar Portable Dehumidifier Unit may have been shipped on its side Damaged compressor issues. Solution Run the unit for a longer period of time. Make sure there are no towels, curtains, or furniture blocking the front and back of the unit. Lower the humidify control. Run the unit in continuous mode. Close all windows and doors. Increase the room temperature. Remove any device producing wafer vapor. The dehumidifier has an auto-defrost feature. Make sure the unit is plugged in. Move the unit fo another outlet. Check your circuit breaker. (Refer fo the rating label on the back of the unit fo determine the Amperage draw). Drain the unit and restart. Remove bucket and reinserf. If no indicator lights turn on, contact customer service. Make sure the unit is on a level surface. Shut off the unit, and remove the object from the fan. Move the unit fo a level surface. Clean the air filter. Shut off the unit. Let the unit sit on a level surface for af least 24 hours and restart. Contact customer service. 10 Troubleshooting continued... Secure the drain hose. My dehumidifier leaking is A drain hose has been attached and is loose Cracked My dehumidifier runs for a little while and then it trips the power cord or the circuit breaker water bucket The dehumidifier may be plugged into an outlet that can not supply the correct amount of current The control panel lights blink randomly Unit may have a faulty control panel Unit has an AS error Humidify sensor error Unit has an ESerror Temperature error Unit has a EC error sensor Unit malfunction Route your drain hose to a drain hole or condensate pump. Contact custom.er service. Contact an electrician if the unit works in a different room or circuit. Restart the unit, and if issue persists, contact customer service. Restart the unit, and if issue persists, contact customer service. Restart the unit, and if issue persists, contact customer service. Make sure the ambient temperature is suitable for the unit (41°F 95°F). If not please operate the unit under the stated temperature. If the ambient temperature is suitable, please contact customer service. Unit has a P2 error 11 Bucket is full Bucket is not correctly installed Empty the bucket and reinstall. Remove the bucket and reinstall. Specifications Description Portable of product Model DEP301EW Voltage/Frequency AC 115V-60Hz Power Consumption 310W Operating 3.0A Current 3.5 Liters / .92 Gallons Water Bucket Capacity Dehumidifying RH60% EdgeStar Portable Dehumidifier Dehumidifier Capacity @ 80F 30 Pints/Day Refrigerant R410A Dimensions WxDxH 143/16"x913/16"x197/8" Weight 29 Ibs. 12 EdgeStar Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defective workmanship set forth as follows: and materials, subject to any conditions WHAT IS COVERED: LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange the defective product with a new, refurbished, or remanufactured product. If a product is replaced, it will carry the remaining warranty of the original product. After the ninety (90) day period, EdgeStar will no longer be responsible for labor charges incurred. All defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to an EdgeStar authorized repair facility. PARTS: For a period of ONE (1) YEAR from the date of original purchase, EdgeStar will supply new, rebuilt, or refurbished parts free of charge. EdgeStar may request a defective part be returned in exchange for the replacement part. All replacement parts or products will be new, remanufactured, or refurbished. All products and parts replaced by EdgeStar under warranty service become the property of EdgeStar. This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the product under normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product in residential settings within the United States of America. WHAT IS NOT COVERED: The following limitations apply to the coverage of this warranty. This warranty does not cover: ,, Labor charges for installation, setup or training to use the product. ,, Shipping damage, and any damage caused by improper packaging for shipment to an authorized service center, and any damaged caused by improper voltage or any other misuse, including abnormal service, handling, or usage. ,, Cosmetic damage such as scratches and dents. ,, Normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, cartridges, batteries. ,, Service trips to deliver, pick-up, or repair, install the product, or to instruct in proper usage of the product. ,, Damages or operating problems resulting from misuse, abuse, operation outside environmental specifications, uses contrary to instructions provided in the owner's manual, accidents, acts of God, vermin, fire, flood, improper installation, unauthorized service, maintenance negligence, unauthorized installation or modification, or commercial use. ,, Labor charges incurred 91 days or more after the date d original purchase. ,, The use of EdgeStar products in commercial settings. ,, Optional accessories, attachments, and appearance items. ,, Products that have been modified to perform outside of specifications without the prior written permission of EdgeStar. • Products lost in shipment, or theft. ,, Products sold AS IS or from an unauthorized reseller. ,, Products that have had their serial numbers removed or defaced. Products with serial numbers that have been invalidated. OBTAINING WARRANTY SERVICE: If you believe your product is defective, contact EdgeStar Customer Support for troubleshooting assistance and warranty service at 1-866-319-5473. Please have your serial number and proof of purchase available. Once an EdgeStar authorized representative has confirmed that your product is defective and eligible for warranty service, the product must be returned to an EdgeStar repair facility. The purchaser is solely responsible for prepaying all shipping related costs to and from the repair facility. EdgeStar is not responsible for damage resulting from shipper mishandling or improper packaging. Do not return a defective product to the place of purchase. Products received without a return authorization number will be refused. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. EdgeStar Beverage Cooler EdgeStar Products 500 N. Capital of TX Hwy, Bldg 5 Austin, TX 78746 Toll Free: 1-866-319-5473 Web: http://www.edgestar.com E-mail: service@edgestar.com Register your product, download owner's manuals, access additional troubleshooting resources, and obtain more information on other great EdgeStar & Koldfront products on the web at: http://www.edgestar.com Product contents Copyright and specifications may change without notice. © 2012 Living Direct, Inc. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 17 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Sat Mar 29 09:52:27 2014 Author : Title : Subject :EXIF Metadata provided by EXIF.tools