Edimax Technology Co 9531009803 User Manual 70457
Edimax Technology Co Ltd 70457
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 70457 |
| Application ID | +f527OFK+8DQMRCPRlNplQ== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 15.05kB (188146 bits) |
| Date Submitted | 1999-11-17 00:00:00 |
| Date Available | 1998-12-10 00:00:00 |
| Creation Date | 2001-05-15 20:23:12 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-05-15 20:23:21 |
| Document Title | 70457.pdf |
| Document Author: | VicodinES /CB /TNN |
f NEUTRON EMO LABA
FCC IDzND09531®®98®é
Attachment
User’s Manual
20/20
PrintSir Plus
PS-3100+ Series
3-Port 10/1 OOMbps
Desktop Print Server
User’s Manual
l Hardware Installation
l Features and Specifications
FCC COMPLIANCE STATEMENT
This equipment genera-es and uses mdlo Irequency energy and if not
installed and used properly. that is. in strlcl accordance wit me
insu-ucnuns provided W|L|1 the equipment. may cause interference to
mdic and TV reception. The equipmenl has been tested and found to
cnmply with the limits for a Clam B compulmg devtce in nccnrdance
with the specifications in Subpm B of Pan 15 of FCC rules. which at:
designed to pmvide reasonable prOIeClIOYl against such interference in e
commerclal enVlmnmenl. However. mere ls no guzmnlee that
interference will not occur in a pamcular installation.
If you suspect LhIS equipment is causing interference. mm your prim
server on and off while your radio or TV is showing interference lo
determine the source of the interference.
You can try to CUI‘I’ECL [he lnterference by one or more ofthe following
measures:
1. Reoriem [he recelvlng radio or TV antenna where lhls may be done
safely.
2. To me extent possible. relocate lhe radio. TV or me (“her receiver
away from an equipment.
1 Plug the computer which hes me equipment Installed mm a different
power curler 50 that equipment and the receiver are on different
branch circuits. '
if nectssary, you should consult me plan: cfputcnase at an expenenced
mdlo/ televtslcn technician for addillonal suggeslilml
CAUTION The phone jack cannm be connected ta telephone system.
I Hardware Installation
Thanks for purchasmg mrs Fasr Ethernet Prim Server - PS-3100+. Tins
guide explains its external feamresr explains how In unpack your Prmr
Server hardware. and tells how you can connec! u (0 your primer and w
your network
Requirements
To use your F‘s—3100», you will need .
- Printers wim pamllel interface.
- Ethernet network cabling, as we]! as a free lOBase-T hub: or Fasl
Elhemel network cabling, as well as a free lOOBase»TX huh.
Unpacking the Print Server
When you unpack your rs-sior». you should find :
- One Pnnl Server with lhree parallel pnnler cunnecwrsr
- One power mum. with an mum voltage appropriale fur your area.
- One 3 5 inch soflware diskette containing the "Prim-v Utrlruesfar
DO? program
' One 3.5 inch software diskefle containing the “PnnLYir Uri/triufar
Windaw 95/98/NT’ pregmm.
- One 3.5 inch safi‘wm diskette ccnummg the "Pr-mlSrr LPR Frmr
Driver/07 Windows 95/93" promm,
' One } 5 inch sofiware diskene cnnmmmg the "PrinLSi'r WEE
Managtmenl marry/or Windows 95/9WNT' program.
' One User's Manual {or software installation and configuration.
- One User's Manual (or hardware installannn and leaning/specifications.
If any oflhe above items is m|ssmg or damaged eonuu your dealer
immediately.
LED Indicators
The PS-3l00+ ls cqulpped W|ll1 five LED indicators that Shaw “3 current
gram; and can be used for diagnosing problems on the network and the
F's-3100+ Itself :
“mumps J—pon Punt 5mm
0 rmmcv
0 inIILNIVACT
- smut LED: (green)
The Status LED is [Al '
l. When the Print Server is powered on. When power is applied to the
Print Smer. ll performs a Power-On Sell'Tesl (POST). When the
selflmst is complete, the 57.1an LEDs will blink to indicate the result
oflhe tesL Please refena the user’s manual for mfiwate
configuration. r
2 During ham-in eperarinrr. Each Status LED is far one pnnlef
respecuvely. The Status LEDs Wlll flash when pnntlng m the printer.
and will be onwhrle rhe pnnlcr ls wamng for prlnljobs.
3. During software upgrade. The LEDs will he lil continuuusly durlng
rhe upgrade. lf the upgrade fails. the LEDs will Slay on umil the l>rrm
Szrvcr‘s sofiwm IS successfully upgraded.
' lflOM Link/ACT LED (green)
The lODM Link/ACT LED shows the Slams af me Punt. Server's
lOOM‘bps network connection :
1. If yuu are usmg a lOOBne—TX conncclicn w the Print Server. die
IOOM Llnk/ACT LED will manually be on in indicate a good link.
2. The IOOM Link/ACT LED will flash when there is network truffle
flows on the network.
- wM Link/AC!” LED (yellow)
The |0M Link/ACT LED shows the status of the Prim Server‘s lDMbps
network oonnection v
i lfyou m using a lOBaseT connection to me Print Server. the
WM Link/ACT LED wrll normally be on to indicate a good link,
2 The IOM Link/ACT LED will flash when there is network truffle
flows on the neiwon:
Connecting to the Printer
The mt end of the PS—llOOt' has three Standard 25»pm parallel printer
connectors To connect the Print Server to your printerisl '
1 Connect 25-pm connector ofthe printer cable to one of the parallel
connectors at the Print Server.
2. Connect the other connector of die printer cable to the primer. if your
printer supports more than one type of ccnnecnon. make sure u is
eonflgmed to use the parallel pan
3. if you have two or three printem repeal step 1.1
Connecting to the Network
You can connect the PS-3 |00+ to either a lOOBase-TX Fast Ethernet
network or a iOBaseT Elhemet network using twrsted-palr cabling.
To connect the Pnnl Saver to your Fast Ethel-rm or Ethernet network,
1 Make sure mat the cable between the Print Server and your hub is no
longer than 100 mam. Use an ordtllary straight-through twisted-pair
cable. Category 3 or beuer quality for lOBaseT connection: or use a
Category 5 Straight-through mined-pair cable for iooBase-TX
connection.
Locate an unused pen on your hub or concentrator. Plug me lU-45
connector on one end nfyour twisted pair cabling into the pan
3. Plug the other end of the cable into the Print Server”: RJ—45
connection If both the hub and the Print Server are powered On. the
Link indicators ofboth me huh and Print Server should light to indicate
a good tunnectian between the hub and the Print Server
NOTE v Use only the power adapter included with your F'nnt Sewer.
Damage may resuli if an incorrect power adapter is used.
I Features & Specifications
Features
- One lOBaseT/IOOBase'lX, auto-sensing pon,
' Three parallel ports.
- Windows 95/98 unly network primer snm supporlr
- Quick and my mum-ion. support DHCP server and cum.
- Web»based managemem enables admmismmr using web browseno
View and configure m: pl'lm server
- Wall mountable
Specifications
- One STP oonneclor
- Three ZS-pm parallel vnnler connectors
- Suppon SPP mode
- Network data mm me IO/IUOMhps auto-sensing
' Standards : [EEE 8023 lOBaseT ElhemeL
(EEE 802.3u IOOBase’l'X Fan Ememet.
' LED indicators .
Green LED far lOOMbps Lmk OK/Carrier Sense.
Yellow LED for lOMbps Link OK/Carrier Sense.
The: green LED: for [he Prim Server‘s status,
- Maximum power consumption 500m
' Power adnpler SVDC/lA
' Dimensions 220cm x 116v5cm x 32 cm
- Weight" 775g
- Temperature 0 in 45°C (cpemmg)
- Certifications :
FCC Class E
CE Mark certification
Models
1. PS»3100A+ ' Prim Server For all prulocoli Including IPX/SPX4 TCP/IP.
supports Neer Bindery/NBS mode; Windows NT
3m x. UNIX. Winduws 95/93 Newark.
2, PS~3100W+ , Print Server for Windows only. suppons Windows
95/98/NT network using TCP/IP promo].
Jr,
Mine
PrintSir Plus
PS—l 100+ Series
1-Port10/100Mbps
Desktop Print Server
User’s Manual
l Hardware Installation
I Features and Specifications
FCC COMPLIANCE STATEMENT
I‘hls equlpmem gellemcs and use; radw frequency energy and lr' nor
lnstallcd and used properly, mm ls. ln slrlct accordance wuh rh:
lnstrucriuns pmwded will (11: squlpmem. may muse lmerference m
radm and TV reccprlon. The cqulpmcnl has been lestcd and found lo
comply wlth m: limns for a Class B compurlng devlce m accordance
will the spcclt'lcanons ln Subpan B nfl’m 15 anCC mlesl whlch are
daignzd to proud: rwsonable pmlecrmn ngnlnsr such mrerfmlrlc: m :l
cummercml crmmnmcnl, However. mere ls no guarantee mar
mmrference Wl" nm occur m a pmlcular mslallauon.
If you mpecr this equlpmem 15 causing lmcrference. turn your pnnr
sgrvcr on and off while your radio or TV ls snawing interference lo
dam-mine rhe source of the lnurference,
You can lry to camel me lnlerfarence by an: or mar: ofthe following
measum:
Iv Reuriem the rccclvlng radla or TV antenna wher: lhls may be done
safely.
2. To (he cxrcm 9055113164 reloeale the radio. TV or the ulnar recelvcr
away firm the equipment.
3. Plug the compum whlch has me cqmpmenl insmllzd mm a dlmmn
power Ollllfl so rhaz equlpmenl and the mcclver are on diffcrcm
blanch clrculls. '
lr necessary. yuu should consult the place of purchase nr an experienced
radm/ televlsmn techniclan for addiuenal suggzsfion.
CAUTION . Th: phone jack cannot be connected lo telephone symm,
. Hardware Installation
Thanks fur purchasing thus Fax! Ememel an Sewer - PS-l 100+ rms
guide explains its external features. explains how to unpack your an
Server hardware; and tells how you can connect it m your punter and to
your network.
Requirements
Tn use your PS-l 100+. you WI“ nwd'
- A Pnnmr wnh parallel Immune.
- Emmet nuwork cabling. as well as a free lOBase-T hub: or Fasl
Ememct network cabling. as we“ as a in: lOOBm-TX hub.
Unpacking the Print Server
When you unpuk you: PS—l mm. you should find
- One Print Servcr with on: parallel pnmzr connector
- One powcr adapur. wnh an input voltage appmpnat: for your arm.
' One 3 5 inch sefiware diskette cnnlammg the "Print Server UlllxllesfiJr
D05” program. . ,
' One 15 inch sofiwar: diskcne camainmg the “Print Server Unlihzxfnr
mum ems/AW program.
' One 3.5 mGh sofiwm diskenc containing the "Print Server LPR Prim
Driver for mes 95/98" pmyarn.
' One 3.5 lnch snfiwarc diskette cnnmnmg the “Pm-t Server WEB
Mnnagamtnl Utililyfor Window: 95/98/NT‘ grog—am.
' On: User’s Manual for safiwarn mstallmion and configummn.
' One User's Manual for Hardware mstallation and fennum/specnficanons.
If any of the above nams IS missmg or damaged. comm your dulcr
immediately
an
LED Indicators
The PS-1100+|§ eqmpped wuh three LED |nd|cawrs [her show us currenr
sum. and can be used for diagnusmg problems on the nzlwork and the
an Server "self ‘
"mambo. won Prim Server
0 lmmmmcr
O mev-ILNKJMZT
mm
- Status LED lgrnn)
Th: Sums LED ls lit:
1. When rhe an Server is puwemd her When power is applied to rhe
Pnnl Server. ll performs a Powcr-On SelfTssl ll’DST) When {he
sclf-lfist ls complete. 1h: Slams LED will blink m Indicate the result
of the (at Please refer to the user's manual for software
configummn,
2. During normal operaliun. The Slams LED mi] flash when prinnng to
rhe pnmer. and will be off while rhe pnmer IS waitmg fer prim jobs.
Sr Dunn; sofiwm upgrade. Th: LED will be lit contmuously during
the upgnule. If we upgmd: fans. me LED will my on mm rhe Print
Scrv=r‘s soflwale ls successfully upgraded.
- 100m Link/ACT LED (green)
The lOOM Link/ACT LED shows me status nfme an Server’s
lOOMbps nztwurk connccuon :
1. If you am using a lOOBase-TX connection to (h: an Servzr. the
[DOM Link/AC? LED will manually be on m Indicalc a good link
24 The IDOM Lmk/ACT LED will flash when that: is network lmfl'lc
flows on the network,
ii. ._
' IOM Link/ALT LED (yellow)
The [GM Link/ACT LED shows the seams ofrhe Pnnt Sewer's lOMhps
network cunnemon
I If you are 15mg 3 lOBaseT connection to (he Pnnt Server. the
IOM Link/ACF LED Will normally be an (0 indicate a good link.
2. The iOM Link/ACT LED will flash when there iS nerwork traffic
flows on the network
Connecting to the Printer
The tear end oflhe PS-I 100+ has une standard zs-pm pamilei printer
connector. To connect the Print Server to your printer
i, Connect 25~pm connecmr ofthe printer cable to me pmuei cunnecmr
at the Print Server.
2. Connect the other connector of the printer cable to me printer. if your
primer supports more than one rype ofcnnnectmn. make sure it is
configured to use the penile! porl.
Connecting to the Network
You can connect The PS-l 100+ in either a lOOBue-TX Fast Ethernet
network or a iOBaseT Ethernet network usmg twisted-pair cabling.
To connect the Print Server to your Faeruremet or Ethernet network.
1. Make suit me: the cable between the Prinl Server and your hub is no
longer dun 100 merers. Use an ordinary straight-through waned-pair
cable, Category 3 or better quuiity for loBaseT connecnon: or use a
Ceregury s straight-through twisted-pair cable for lOOBase-TX
connection.
2. Locate un unused port on your hub or concentrator. Plug me R145
connector on one end of your twisted pair cabling into me port.
3. Plug the other end ofthe Cable mm the Print Server’s R145
connection. [fbolh me huh and the Print Server are powered on. the
Link indicators of both the hub and Prml Server should light to indicate
a good connecu'on between the hub and the Print Serven
NOTE Use envy the power adapter induded wnh your Print Server.
Damage may result if an incorrect power adapter is used.
I Features & Specifications
Features
- One lOBaseT/IOOBaseTX. auto‘senslng port.
- One pamllel ports.
- Windows 95/95 only network printer share >uppurL
- Qulck and easy Insmllalmn. support DHCP server and client.
' Web-based management enables admlnlsttator use Web browser to View
and cnnfigure the pnnt server.
' Wall mountable
Specifications
' One STP connector
- One ls-pin pamllel printer connectors
- Support SPP mode
' Network data msfer ml: . lO/lOOMbps auto-sensing
' Smudards .' IEEE 802.3 lOBaseT EthemeL
IEEE SOZJM 100525ch Fast ElhemeL
' LED indicators
Green LED far IOOMbps Link OK/Camer Sense.
Yellow LED for lOMbps Link OKl'éamet Sense.
Three green LEDS far the Print Server's sums.
- Maximum power consumpuon 4 SOGmA
' Power adapler ' 6VDC/lA
- Dimensions ' 20cm x llfijcm x 32 cm
- Weigh! : 750g
- Tempenture : 0 to 45°C (operating)
- Cemflcauons
FCC Clus B
CE Mark eemficalion
Models
I PS-l |00A¢ ' Print Server (or all prurocoli lncluding lPX/SPX. TCP/IP.
supports NetWare Bindery/NBS mode. Windows NT
3.x/4.xl Ule. Windows 95/93 Network Suppnm remote
pnntet function under NetWare enVlronmenL
zl PS-l loow+ Print Server for Windows only. supports Windows
95/98/NT network using TCP/IP protocol.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:05:15 20:23:12 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 70457.pdf Modify Date : 2001:05:15 20:23:21-04:00 Page Count : 14EXIF Metadata provided by EXIF.tools