Edimax Technology Co 9576791401 11ac Dual Band concurrent Wall-mount AP User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2307035
Application ID	Q5AWRdrhYBgJsf9W7g3N3w==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	164.32kB (2054040 bits)
Date Submitted	2014-06-26 00:00:00
Date Available	2014-06-26 00:00:00
Creation Date	2014-06-09 09:40:16
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2014-06-09 09:40:16
Document Title	untitled

WAP1750
User Manual
02‐2014 / v1.0
CONTENTS
I. Product Information ............................................................................... 4
I‐1.
I‐2.
I‐3.
I‐4.
I‐5.
I‐6.
I‐7.
Package Contents .......................................................................................................... 4
System Requirements .................................................................................................... 5
Hardware Overview ....................................................................................................... 5
LED Status ...................................................................................................................... 6
Reset .............................................................................................................................. 6
Magnetic Wall Mount .................................................................................................... 7
Safety Information ......................................................................................................... 8
II. Quick Setup ......................................................... 錯誤! 尚未定義書籤。
II‐1.
II‐2.
II‐3.
Initial Setup .................................................................................................................... 9
Basic Settings ............................................................................................................... 11
Wi‐Fi Protected Setup (WPS) ....................................................................................... 15
III. Hardware Installation ........................................................................... 16
IV. Browser Based Configuration Interface................................................. 17
IV‐1.
IV‐1‐1.
IV‐1‐2.
IV‐1‐3.
IV‐1‐4.
IV‐2.
IV‐2‐1.
IV‐2‐2.
IV‐2‐3.
IV‐3.
IV‐3‐1.
IV‐3‐1‐1.
IV‐3‐1‐2.
IV‐3‐1‐3.
IV‐3‐1‐3‐1.
IV‐3‐1‐3‐2.
IV‐3‐1‐3‐3.
IV‐3‐1‐3‐4.
IV‐3‐1‐3‐5.
IV‐3‐1‐3‐6.
IV‐3‐1‐4.
Information ................................................................................................................ 19
System Information ................................................................................................... 19
Wireless Clients.......................................................................................................... 23
Wireless Monitor ....................................................................................................... 25
Log .............................................................................................................................. 27
Network Settings ....................................................................................................... 29
LAN‐Side IP Address ................................................................................................... 29
LAN Port ..................................................................................................................... 31
VLAN .......................................................................................................................... 32
Wireless Settings........................................................................................................ 33
2.4GHz 11bgn............................................................................................................. 33
Basic ........................................................................................................................... 34
Advanced ................................................................................................................... 37
Security ...................................................................................................................... 39
No Authentication ..................................................................................................... 40
WEP ............................................................................................................................ 41
IEEE802.1x/EAP .......................................................................................................... 41
WPA‐PSK .................................................................................................................... 41
WPA‐EAP .................................................................................................................... 42
Additional Authentication ......................................................................................... 42
WDS ........................................................................................................................... 44
IV‐3‐2.
IV‐3‐2‐1.
IV‐3‐2‐2.
IV‐3‐2‐3.
IV‐3‐2‐4.
IV‐3‐3.
IV‐3‐4.
IV‐3‐4‐1.
IV‐3‐4‐2.
IV‐3‐4‐3.
IV‐3‐5.
IV‐3‐6.
IV‐4.
IV‐4‐1.
IV‐4‐2.
IV‐4‐3.
IV‐4‐4.
IV‐5.
IV‐5‐1.
IV‐5‐2.
IV‐5‐3.
IV‐5‐4.
5GHz 11ac 11an ......................................................................................................... 46
Basic ........................................................................................................................... 46
Advanced ................................................................................................................... 49
Security ...................................................................................................................... 51
WDS ........................................................................................................................... 53
WPS ............................................................................................................................ 55
RADIUS ....................................................................................................................... 57
RADIUS Settings ......................................................................................................... 58
Internal Server ........................................................................................................... 60
RADIUS Accounts ....................................................................................................... 62
MAC Filter .................................................................................................................. 64
WMM ......................................................................................................................... 66
Management ............................................................................................................. 68
Admin ......................................................................................................................... 68
Date and Time ............................................................................................................ 71
Syslog Server .............................................................................................................. 73
I’m Here ..................................................................................................................... 74
Advanced ................................................................................................................... 75
LED Settings ............................................................................................................... 75
Update Firmware ....................................................................................................... 76
Save/Restore Settings ................................................................................................ 77
Factory Default .......................................................................................................... 79
IV‐5‐5.
Reboot........................................................................................................................ 80
V. Appendix .............................................................................................. 81
V‐1.
V‐1‐1.
V‐1‐2.
V‐1‐3.
V‐1‐4.
V‐1‐5.
V‐1‐6.
Configuring your IP address ....................................................................................... 81
Windows XP ............................................................................................................... 82
Windows Vista ........................................................................................................... 84
Windows 7 ................................................................................................................. 86
Windows 8 ................................................................................................................. 90
Mac ............................................................................................................................ 94
Glossary...................................................................................................................... 96
I. Product Information
I‐1. Package Contents
WAP1750 Access Point
Antennas x 3
Magnetic Wall Mount x 2
& Screws
4.
1.
2.
3.
CD
5.
6.
7.
8.
Quick Installation Guide
Ethernet Cable
Power Adapter
Magnetic Wall Mount Screw
Template
I‐2. System Requirements
‐ Existing cable/DSL modem & router
‐ Computer with web browser for access point configuration
I‐3. Hardware Overview
A 12V DC IN
C LAN 2
B LAN 1 (PoE)
A.
B.
C.
D.
E.
F.
G.
H.
I.
E Eject
D USB Port
G Reset
F Console
12V DC port to connect the power adapter
LAN port with Power over Ethernet (PoE) IN
LAN port with Power over Ethernet (PoE) OUT
USB Port for system log
Eject an attached USB device
Connect a management console
Reset the access point to factory default settings
Wi‐Fi Protected Setup (WPS) button
Switch the access point on/off
I On/Off
H WPS
I‐4. LED Status
LED Status
Description
Off
The access point is off.
Blue
The access point is on.
Amber
Flashing Amber
The access point is starting up.
The access point cannot establish a connection to
the network.
Flashing Amber The access point experienced a problem starting
and Blue
up. The access point will restart.
I‐5. Reset
If you experience problems with your access point, you can reset the device
back to its factory settings. This resets all settings back to default.
1.
Press and hold the reset button on the access point for at least 10 seconds.
Release the button when the LED is flashing amber.
You may need to use a pencil or similar sharp object to push the
reset button.
2.
Wait for the access point to restart. The access point is ready for setup
when the LED is blue.
I‐6. Magnetic Wall Mount
The access point includes a magnetic wall mount which requires some
assembly.
1.
Use the included magnetic wall mount screw template to identify and
mark correct screw positions on your selected wall.
2.
Attach the two magnetic wall mount strips to your wall using the included
screws, as shown below.
3.Press the back of your access point firmly against the two wall mounted
magnetic strips, with the access point’s Edimax logo in the correct, upright
orientation as displayed above.
Ensure your access point is securely attached to the magnetic
strips.
I‐7. Safety Information
In order to ensure the safe operation of the device and its users, please read
and act in accordance with the following safety instructions.
1. The access point is designed for indoor use only; do not place the access
point outdoors.
2. Do not place the access point in or near hot/humid places, such as a kitchen
or bathroom.
3. Do not pull any connected cable with force; carefully disconnect it from the
access point.
4. Handle the access point with care. Accidental damage will void the
warranty of the access point.
5. The device contains small parts which are a danger to small children under
3 years old. Please keep the access point out of reach of children.
6. Do not place the access point on paper, cloth, or other flammable materials.
The access point may become hot during use.
7. There are no user‐serviceable parts inside the access point. If you
experience problems with the access point, please contact your dealer of
purchase and ask for help.
8. The access point is an electrical device and as such, if it becomes wet for
any reason, do not attempt to touch it without switching the power supply
off. Contact an experienced electrical technician for further help.
9. If you smell burning or see smoke coming from the access point or power
adapter, then disconnect the access point and power adapter immediately,
as far as it is safely possible to do so. Call your dealer of purchase for help.
II. Quick Setup
II‐1.
Initial Setup
1. Connect the access point to a computer via Ethernet cable.
2. Connect the power adapter to the access point’s 12V DC port and plug the
power adapter into a power supply.
3. Please wait a moment for the access point to start up. The access point is
ready when the LED is blue.
4. Set your computer’s IP address to 192.168.2.x where x is a number in the
range 3 – 100. If you are unsure how to do this, please refer to V‐1.
Configuring your IP address for more information.
Please ensure there are no other active network connections on
your computer (disconnect Wi‐Fi connections and Ethernet
cables).
5. Enter the access point’s default IP address 192.168.2.2 into the URL bar of
a web browser.
6. You will be prompted for a username and password. Enter the default
username “admin” and the default password “1234”.
7. You will arrive the “System Information” screen shown below.
8. Next, please follow the instructions below in II‐2. Basic Settings to
configure the access point’s basic settings.
For more advanced configurations, please refer to IV. Browser
Based Configuration Interface.
10
II‐2.
Basic Settings
The instructions below will help you to configure the following basic settings
of the access point:
‐
‐
‐
‐
LAN IP Address
2.4GHz & 5GHz SSID & Security
Administrator Name & Password
Time & Date
It is recommended you configure these settings before using the
access point.
1.
To change the access point’s LAN IP address, go to “Network Settings” >
“LAN‐side IP Address” and you will see the screen below.
2.
Enter the IP address settings you wish to use for your access point. You
can use a dynamic (DHCP) or static IP address, depending on your network
environment. Click “Apply” to save the changes and wait a few moments
for the access point to reload.
When you change your access point’s IP address, you need to use
the new IP address to access the browser based configuration
interface instead of the default IP 192.168.2.2.
11
3.
To change the SSID of your access point’s 2.4GHz wireless network(s), go
to “Wireless Setting” > “2.4GHz 11bgn” > “Basic”. Enter the new SSID for
your 2.4GHz wireless network in the “SSID1” field and click “Apply”.
To utilize multiple 2.4GHz SSIDs, open the drop down menu
labelled “Enable SSID number” and select how many SSIDs you
require. Then enter a new SSID in the corresponding numbered
fields below, before clicking “Apply”.
4.
To configure the security of your access point’s 2.4GHz wireless
network(s), go to “Wireless Setting” > “2.4GHz 11bgn” > “Security”. Select
an “Authentication Method” and enter a “Pre‐shared Key” or “Encryption
Key” depending on your choice, then click “Apply”.
If using multiple SSIDs, specify which SSID to configure using the
“SSID” drop down menu.
12
5.
Go to “Wireless Setting” > “5GHz 11ac 11an” and repeat steps 3 & 4 for
the access point’s 5GHz wireless network.
6.
To change the administrator name and password for the browser based
configuration interface, go to “Management” > “Admin”.
7.
Complete the “Administrator Name” and “Administrator Password” fields
and click “Apply”.
8.
To set the correct time for your access point, go to “Management” >
“Date and Time”.
9.
Set the correct time and time zone for your access point using the drop
down menus. The access point also supports NTP (Network Time Protocol)
13
so alternatively you can enter the host name or IP address of a time server.
Click “Apply” when you are finished.
You can use the “Acquire Current Time from your PC” button if
you wish to set the access point to the same time as your PC.
10.
The basic settings of your access point are now configured. Please
refer to III. Hardware Installation for guidance on connecting your access
point to a router or PoE switch.
14
II‐3.
Wi‐Fi Protected Setup (WPS)
Wi‐Fi Protected Setup is a simple way to establish connections between WPS
compatible devices. You can use the WPS button to establish a connection
between the access point and a WPS‐compatible wireless device/client.
1.
Press and hold the WPS/Reset button on the front of the access point for
2 seconds.
2.
Within two minutes, activate WPS on your WPS‐compatible wireless
device. Please check the documentation for your wireless device for
information regarding its WPS function.
3.
15
The devices will establish a connection.
III. Hardware Installation
1.
Connect a router or PoE switch to the access point’s LAN 1 port using an
Ethernet cable. PoE switches must be connected to the access point’s LAN
1 port.
2.
If you are using a router, then connect the power adapter to the access
point’s 12V DC port and plug the power adapter into a power supply.
3.
If you are using a PoE (Power over
Ethernet) switch then it is not necessary
to use the included power adapter, the
access point will be powered by the PoE
switch.
Do not use the power adapter if you
are using a PoE switch.
4.
Connect a local network client or switch to the access point’s LAN 2 port
as required.
The access point’s LAN 2 port can support PoE clients.
16
IV. Browser Based Configuration Interface
The browser‐based configuration interface enables you to configure the
access point’s advanced features. The WAP1750 features a range of advanced
functions such as MAC filtering, MAC RADIUS authentication, VLAN
configurations, up to 32 SSIDs and many more. To access the browser based
configuration interface:
1.
Connect a computer to your access point using an Ethernet cable.
2.
Enter your access point’s IP address in the URL bar of a web browser. The
access point’s default IP address is 192.169.2.2.
3.
You will be prompted for a username and password. The default
username is “admin” and the default password is “1234”, though it was
recommended that you change the password during setup (see II‐2. Basic
Settings).
If you cannot remember your password, reset the access point
back to its factory default settings. Refer to I‐5. Reset
4.
You will arrive at the “System Information” screen shown below.
5.
Use the menu across the top and down the left side to navigate.
17
6.
Click “Apply” to save changes and reload the access point, or “Cancel” to
cancel changes.
Please wait a few seconds for the access point to reload after you
“Apply” changes, as shown below.
7.
18
Please refer to the following chapters for full descriptions of the browser
based configuration interface features.
IV‐1.
Information
Screenshots displayed are examples. The information shown on
your screen will vary depending on your configuration.
IV‐1‐1.
System Information
The “System Information” page displays basic
system information about the access point.
19
20
Model
Product Name
Uptime
Boot From
MAC Address
Management VLAN
ID
Runtime Code
Version
IP Address
Default
Gateway
DNS
21
Displays the model number of the access
point.
Displays the product name for reference,
which consists of “AP” plus the MAC address.
Displays the total time since the device was
turned on.
Displays information for the booted
hardware, booted from either USB or internal
memory.
Displays the access point’s MAC address.
Displays the management VLAN ID.
Displays the runtime code version.
Displays the IP address of this device. Click
“Refresh” to update this value.
Displays the IP address of the default
gateway.
IP address of DNS (Domain Name Server)
DHCP Server
IP address of DHCP Server.
Wired LAN Port
Status
Specifies which LAN port (1 or 2).
Displays the status of the specified LAN port
(connected or disconnected).
Displays the VLAN mode (tagged or untagged)
and VLAN ID for the specified LAN port. See
IV‐2‐3. VLAN
VLAN Mode/ID
Status
MAC Address
Channel
Transmit Power
SSID
Additional
Authentication
Wireless Client
Isolation
Displays the SSID name(s) for the specified
frequency.
Displays the authentication method for the
specified SSID. See IV‐3. Wireless Settings
Displays the encryption type for the specified
SSID. See IV‐3. Wireless Settings
Displays the VLAN ID for the specified SSID.
See IV‐2‐3. VLAN
Displays the additional authentication type for
the specified SSID. See IV‐3. Wireless Settings
Displays whether wireless client isolation is in
use for the specified SSID. See IV‐2‐3. VLAN
Refresh
Click to refresh all information.
Authentication
Method
Encryption Type
VLAN ID
22
Displays the status of the 2.4GHz or 5GHz
wireless (enabled or disabled).
Displays the access point’s MAC address.
Displays the channel number the specified
wireless frequency is using for broadcast.
Displays the wireless radio transmit power
level as a percentage.
IV‐1‐2.
Wireless Clients
The “Wireless Clients” page displays
information about all wireless clients
connected to the access point on the 2.4GHz or 5GHz frequency.
Auto Refresh Time
Manual Refresh
SSID
MAC Address
Tx
Rx
Signal (%)
Connected Time
23
Select a time interval for the client table list to
automatically refresh.
Click refresh to manually refresh the client
table.
Displays the SSID which the client is
connected to.
Displays the MAC address of the client.
Displays the total data packets transmitted by
the specified client.
Displays the total data packets received by
the specified client.
Displays the wireless signal strength for the
specified client.
Displays the total time the wireless client has
Idle Time
Vendor
24
been connected to the access point.
Client idle time is the time for which the client
has not transmitted any data packets i.e. is
idle.
The vendor of the client’s wireless adapter is
displayed here.
IV‐1‐3.
Wireless Monitor
Wireless Monitor is a tool built into the access
point to scan and monitor the surrounding
wireless environment. Select a frequency and click “Scan” to display a list of
all SSIDs within range along with relevant details for each SSID.
Channel Survey
Channel Survey
Result
Ch
SSID
MAC Address
Security
Signal (%)
25
Select which frequency (or both) to scan, and
click “Scan” to begin.
After a scan is complete, click “Export” to save
the results to local storage.
Displays the channel number used by the
specified SSID.
Displays the SSID identified by the scan.
Displays the MAC address of the wireless
router/access point for the specified SSID.
Displays the authentication/encryption type
of the specified SSID.
Displays the current signal strength of the
Type
Vendor
26
SSID.
Displays the 802.11 wireless networking
standard(s) of the specified SSID.
Displays the vendor of the wireless
router/access point for the specified SSID.
IV‐1‐4.
Log
The system log displays system operation
information such as up time and connection
processes. This information is useful for network administrators.
When the log is full, old entries are overwritten.
Save
Clear
Refresh
27
Click to save the log as a file on your local
computer.
Clear all log entries.
Refresh the current log.
The following information/events are recorded by the log:
USB
Mount & unmount
Wireless Client
Connected & disconnected
Key exchange success & fail
Authentication
Authentication fail or successful.
Association
Success or fail
WPS
M1 ‐ M8 messages
WPS success
Change Settings
System Boot
Displays current model name
NTP Client
Wired Link
LAN Port link status and speed status
Proxy ARP
Proxy ARP module start & stop
Bridge
Bridge start & stop.
SNMP
SNMP server start & stop.
HTTP
HTTP start & stop.
HTTPS
HTTPS start & stop.
SSH
SSH‐client server start & stop.
Telnet
Telnet‐client server start or stop.
WLAN (2.4G)
WLAN (2.4G] channel status and country/region status
WLAN (5G)
WLAN (5G) channel status and country/region status
ADT
28
IV‐2.
Network Settings
Screenshots displayed are examples. The information shown on
your screen will vary depending on your configuration.
IV‐2‐1.
LAN‐Side IP Address
The “LAN‐side IP address” page allows you to
configure your access point on your Local Area
Network (LAN). You can enable the access point to dynamically receive an IP
address from your router’s DHCP server or you can specify a static IP address
for your access point, as well as configure DNS servers.
The access point’s default IP address is 192.168.2.2.
IP Address
Assignment
IP Address
29
Select “DHCP Client” for your access point to
be assigned a dynamic IP address from your
router’s DHCP server, or select “Static IP” to
manually specify a static/fixed IP address for
your access point (below).
Specify the IP address here. This IP address
will be assigned to your access point and will
replace the default IP address.
Subnet Mask
Default Gateway
Specify a subnet mask. The default value is
255.255.255.0
For DHCP users, select “From DHCP” to get
default gateway from your DHCP server or
“User‐Defined” to enter a gateway manually.
For static IP users, the default value is blank.
DHCP users can select to get DNS servers’ IP address from DHCP or manually
enter a value. For static IP users, the default value is blank.
Primary Address
DHCP users can select “From DHCP” to get
primary DNS server’s IP address from DHCP or
“User‐Defined” to manually enter a value. For
static IP users, the default value is blank.
Secondary Address DHCP users can select “From DHCP” to get
secondary DNS server’s IP address from DHCP
or “User‐Defined” to manually enter a value.
For static IP users, the default value is blank.
30
IV‐2‐2.
LAN Port
The “LAN Port” page allows you to
configure the settings for your access
point’s two wired LAN (Ethernet) ports.
Wired LAN Port
Enable
Speed & Duplex
Flow Control
802.3az
31
Identifies LAN port 1 or 2.
Enable/disable specified LAN port.
Select a speed & duplex type for specified LAN
port, or use the “Auto” value. LAN ports can
operate up to 1000Mbps and full‐duplex
enables simultaneous data packet
transfer/receive.
Enable/disable flow control. Flow control can
pause new session request until current data
processing is complete, in order to avoid
device overloads under heavy traffic.
Enable/disable 802.3az. 802.3az is an Energy
Efficient Ethernet feature which disables
unused interfaces to reduce power usage.
IV‐2‐3.
VLAN
The “VLAN” (Virtual Local Area Network)
enables you to configure VLAN settings. A
VLAN is a local area network which maps
workstations virtually instead of physically and allows you to group together
or isolate users from each other. VLAN IDs 0 – 4094 are supported.
VLAN IDs in the range 0 – 4094 are supported.
Wired LAN
Port/Wireless
VLAN Mode
VLAN ID
VLAN ID
32
Identifies LAN port 1 or 2, or wireless SSIDs
(2.4GHz or 5GHz).
Select “Tagged Port” or “Untagged Port” for
specified LAN/wireless interface.
Set a VLAN ID for specified interface, if
“Untagged Port” is selected.
Specify the VLAN ID of the subnet. Hosts
belonging to the subnet can only communicate
with other hosts on the same subnet.
IV‐3.
Wireless Settings
Screenshots displayed are examples. The information shown on
your screen will vary depending on your configuration.
IV‐3‐1.
2.4GHz 11bgn
The “2.4GHz 11bgn” menu allows you to view
and configure information for your access
point’s 2.4GHz wireless network across four
categories: Basic, Advanced, Security and WDS.
33
IV‐3‐1‐1. Basic
The “Basic” screen displays basic settings for
your access point’s 2.4GHz Wi‐Fi network (s).
34
Wireless
Enable or disable the access point’s 2.4GHz
wireless radio. When disabled, no 2.4GHz
SSIDs will be active.
Band
Select the wireless standard used for the
access point. Combinations of 802.11b,
802.11g & 802.11n can be selected.
Enable SSID Number Select how many SSIDs to enable for the
2.4GHz frequency from the drop down menu.
A maximum of 16 can be enabled.
SSID#
Enter the SSID name for the specified SSID (up
to 16). The SSID can consist of any
combination of up to 32 alphanumeric
characters.
VLAN ID
Specify a VLAN ID for each SSID.
Auto Channel
Enable/disable auto channel selection. Auto
channel selection will automatically set the
wireless channel for the access point’s 2.4GHz
frequency based on availability and potential
interference. When disabled, select a channel
manually as shown in the next table.
Auto Channel Range Select a range from which the auto channel
setting (above) will choose a channel.
Specify a frequency for how often the auto
Auto Channel
Interval
channel setting will check/reassign the
wireless channel. Check/uncheck the “Change
channel even if clients are connected” box
according to your preference.
Channel Bandwidth Set the channel bandwidth: 20MHz (lower
performance but less interference), 40MHz
(higher performance but potentially higher
interference) or Auto (automatically select
based on interference level).
BSS BasicRate Set
Set a Basic Service Set (BSS) rate: this is the
transmission rate for control communication
frames for wireless clients.
When auto channel is disabled, select a wireless channel manually:
Channel Interval
35
Select a wireless channel from 1 – 13.
Channel Bandwidth
BSS BasicRate Set
36
Set the channel bandwidth: 20MHz (lower
performance but less interference), 40MHz
(higher performance but potentially higher
interference) or Auto (automatically select
based on interference level).
Set a Basic Service Set (BSS) rate: this is the
transmission rate for control communication
frames for wireless clients.
IV‐3‐1‐2. Advanced
These settings are for experienced users only.
Please do not change any of the values on this
page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of
your access point.
Contention Slot
Select “Short” or “Long” – this value is used for
contention windows in WMM (see IV‐3‐6.
WMM).
Preamble Type
Set the wireless radio preamble type. The
default value is “Short Preamble”.
Guard Interval
Set the guard interval.
802.11g Protection Enable/disable 802.11g protection, which
increases reliability but reduces bandwidth
(clients will send Request to Send (RTS) to
access point, and access point will broadcast
Clear to Send (CTS), before a packet is sent
from client.)
37
802.11n Protection Enable/disable 802.11n protection, which
increases reliability but reduces bandwidth
(clients will send Request to Send (RTS) to
access point, and access point will broadcast
Clear to Send (CTS), before a packet is sent
from client.)
DTIM Period
Set the DTIM (delivery traffic indication
message) period value of the wireless radio.
The default value is 1.
RTS Threshold
Set the RTS threshold of the wireless radio. The
default value is 2347.
Set the fragment threshold of the wireless
Fragment
Threshold
radio. The default value is 2346.
Multicast Rate
Set the transfer rate for multicast packets or
use the “Auto” setting.
Tx Power
Set the power output of the wireless radio. You
may not require 100% output power. Setting a
lower power output can enhance security since
potentially malicious/unknown users in distant
areas will not be able to access your signal.
Beacon Interval
Set the beacon interval of the wireless radio.
The default value is 100.
Set the interval for keepalive messages from
Station Keepalive
Interval
access point to wireless client to verify if the
station is still alive.
38
IV‐3‐1‐3. Security
The access point provides various security options
(wireless data encryption). When data is
encrypted, information transmitted wirelessly cannot be read by anyone who
does not know the correct encryption key.
It’s essential to configure wireless security in order to prevent
unauthorised access to your network.
Select hard‐to‐guess passwords which include combinations of
numbers, letters and symbols, and change your password
regularly.
39
SSID Selection
Broadcast ESSID
Wireless Client
Isolation
Load Balancing
Authentication
Method
Additional
Authentication
Select which SSID to configure security settings
for.
Enable or disable ESSID broadcast. When
enabled, the ESSID will be visible to clients as
an available Wi‐Fi network. When disabled, the
ESSID will not be visible as an available Wi‐Fi
network to clients – clients must manually
enter the ESSID in order to connect. A hidden
(disabled) ESSID is typically more secure than a
visible (enabled) SSID.
Enable or disable wireless client isolation.
Wireless client isolation prevents clients
connected to the access point from
communicating with each other and improves
security. Typically, this function is useful for
corporate environments or public hot spots
and can prevent brute force attacks on clients’
usernames and passwords.
Load balancing limits the number of wireless
clients connected to an SSID. Set a load
balancing value (maximum 50).
Select an authentication method from the drop
down menu and refer to the information
below appropriate for your method.
Select an additional authentication method
from the drop down menu and refer to the
information below (IV‐3‐1‐3‐6.) appropriate for
your method.
IV‐3‐1‐3‐1. No Authentication
Authentication is disabled and no password/key is required to connect to the
access point.
Disabling wireless authentication is not recommended. When
disabled, anybody within range can connect to your device’s SSID.
40
IV‐3‐1‐3‐2. WEP
WEP (Wired Equivalent Privacy) is a basic encryption type. For a higher
level of security consider using WPA encryption.
Key Length
Key Type
Default Key
Encryption Key 1 –
Select 64‐bit or 128‐bit. 128‐bit is more secure
than 64‐bit and is recommended.
Choose from “ASCII” (any alphanumerical
character 0‐9, a‐z and A‐Z) or “Hex” (any
characters from 0‐9, a‐f and A‐F).
Select which encryption key (1 – 4 below) is the
default key. For security purposes, you can set
up to four keys (below) and change which is
the default key.
Enter your encryption key/password according
to the format you selected above.
IV‐3‐1‐3‐3. IEEE802.1x/EAP
Key Length
Select 64‐bit or 128‐bit. 128‐bit is more secure
than 64‐bit and is recommended.
IV‐3‐1‐3‐4. WPA‐PSK
WPA‐PSK is a secure wireless encryption type with strong data
protection and user authentication, utilizing 128‐bit encryption keys.
WPA Type
Encryption
Key Renewal
Interval
Pre‐Shared Key
41
Select from WPA/WPA2 Mixed Mode‐PSK,
WPA2 or WPA only. WPA2 is safer than WPA
only, but not supported by all wireless clients.
Please make sure your wireless client supports
your selection.
Select “TKIP/AES Mixed Mode” or “AES”
encryption type.
Specify a frequency for key renewal in
minutes.
Choose from “Passphrase” (8 – 63
Type
Pre‐Shared Key
alphanumeric characters) or “Hex” (up to 64
characters from 0‐9, a‐f and A‐F).
Please enter a security key/password according
to the format you selected above.
IV‐3‐1‐3‐5. WPA‐EAP
WPA Type
Encryption
Key Renewal
Interval
Select from WPA/WPA2 Mixed Mode‐EAP,
WPA2‐EAP or WPA‐EAP.
Select “TKIP/AES Mixed Mode” or “AES”
encryption type.
Specify an frequency for key renewal in
minutes.
IV‐3‐1‐3‐6. Additional Authentication
Additional wireless authentication methods can also be used:
MAC Address Filter
Restrict wireless clients access based on MAC address specified in the MAC
filter table.
See IV‐3‐5.MAC Filter to configure MAC filtering.
MAC‐RADIUS Authentication
Restrict wireless clients access based on MAC address via a RADIUS server, or
password authentication via a RADIUS server.
See IV‐3‐4.RADIUS to configure RADIUS servers.
WPS must be disabled to use MAC‐RADIUS authentication. See
IV‐3‐3. for WPS settings.
42
MAC RADIUS
Password
Select whether to use MAC address or
password authentication via RADIUS server. If
you select “Use the following password”, enter
the password in the field below. The password
should match the “Shared Secret” used in
IV‐3‐4. RADIUS.
MAC Filter & MAC‐RADIUS Authentication
Restrict wireless clients access using both of the above MAC filtering &
RADIUS authentication methods.
43
IV‐3‐1‐4. WDS
Wireless Distribution System (WDS) can
bridge/repeat access points together in an
extended network. WDS settings can be configured as shown below.
When using WDS, configure the IP address of each access point to
be in the same subnet and ensure there is only one active DHCP
server among connected access points, preferably on the WAN
side.
WDS must be configured on each access point, using correct MAC addresses.
All access points should use the same wireless channel and WEP key.
44
WDS Functionality
Select “WDS with AP” to use WDS or “WDS
Dedicated Mode” to use WDS and also block
communication with regular wireless clients.
When WDS is used, each access point should
be configured with corresponding MAC
addresses, wireless channel and WEP key.
Local MAC Address Displays the MAC address of your access point.
45
WDS #
Enter the MAC address for up to four other
WDA devices you wish to connect.
VLAN Mode
VLAN ID
Specify the WDS VLAN mode.
Specify the WDS VLAN ID.
Encryption
Select whether to use “None” or “AES”
encryption and enter a pre‐shared key for AES.
IV‐3‐2.
5GHz 11ac 11an
The “5GHz 11ac 11an” menu allows you to view
and configure information for your access point’s
2.4GHz wireless network across four categories: Basic, Advanced, Security and
WDS.
IV‐3‐2‐1. Basic
The “Basic” screen displays basic settings for
your access point’s 5GHz Wi‐Fi network (s).
46
Wireless
Enable or disable the access point’s 5GHz
wireless radio. When disabled, no 5GHz SSIDs
will be active.
Band
Select the wireless standard used for the
access point. Combinations of 802.11a,
802.11n & 802.11ac can be selected.
Enable SSID Number Select how many SSIDs to enable for the 5GHz
frequency from the drop down menu. A
maximum of 16 can be enabled.
SSID#
Enter the SSID name for the specified SSID (up
to 16). The SSID can consist of any
combination of up to 32 alphanumeric
characters.
VLAN ID
Specify a VLAN ID for each SSID.
Auto Channel
Enable/disable auto channel selection. Auto
channel selection will automatically set the
wireless channel for the access point’s 5GHz
frequency based on availability and potential
interference. When disabled, select a channel
manually as shown in the next table.
Auto Channel Range Select a range from which the auto channel
setting (above) will choose a channel.
Specify a frequency for how often the auto
Auto Channel
Interval
channel setting will check/reassign the
wireless channel. Check/uncheck the “Change
channel even if clients are connected” box
according to your preference.
Channel Bandwidth Set the channel bandwidth: 20MHz (lower
performance but less interference), Auto
40/20MHz or Auto 80/40/20MHz
(automatically select based on interference
level).
BSS BasicRate Set
Set a Basic Service Set (BSS) rate: this is the
transmission rate for control communication
frames for wireless clients.
When auto channel is disabled, select a wireless channel manually:
Channel Interval
Channel Bandwidth
47
Select a wireless channel.
Set the channel bandwidth: 20MHz (lower
BSS BasicRate Set
48
performance but less interference), Auto
40/20MHz or Auto 80/40/20MHz
(automatically select based on interference
level).
Set a Basic Service Set (BSS) rate: this is the
transmission rate for control communication
frames for wireless clients.
IV‐3‐2‐2. Advanced
These settings are for experienced users only.
Please do not change any of the values on this
page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of
your access point.
Guard Interval
Set the guard interval.
802.11n Protection Enable/disable 802.11n protection, which
increases reliability but reduces bandwidth
(clients will send Request to Send (RTS) to
access point, and access point will broadcast
Clear to Send (CTS), before a packet is sent
from client.)
DTIM Period
Set the DTIM (delivery traffic indication
message) period value of the wireless radio.
The default value is 1.
RTS Threshold
Set the RTS threshold of the wireless radio. The
default value is 2347.
Set the fragment threshold of the wireless
Fragment
Threshold
radio. The default value is 2346.
49
Multicast Rate
Tx Power
Beacon Interval
Station Keepalive
Interval
50
Set the transfer rate for multicast packets or
use the “Auto” setting.
Set the power output of the wireless radio. You
may not require 100% output power. Setting a
lower power output can enhance security since
potentially malicious/unknown users in distant
areas will not be able to access your signal.
Set the beacon interval of the wireless radio.
The default value is 100.
Set the interval for keepalive messages from
access point to wireless client to verify if the
station is still alive.
IV‐3‐2‐3. Security
The access point provides various security options
(wireless data encryption). When data is
encrypted, information transmitted wirelessly
cannot be read by anyone who does not know the correct encryption key.
It’s essential to configure wireless security in order to prevent
unauthorised access to your network.
Select hard‐to‐guess passwords which include combinations of
numbers, letters and symbols, and change your password
regularly.
SSID Selection
Broadcast ESSID
51
Select which SSID to configure security settings
for.
Enable or disable ESSID broadcast. When
enabled, the ESSID will be visible to clients as
an available Wi‐Fi network. When disabled, the
ESSID will not be visible as an available Wi‐Fi
network to clients – clients must manually
enter the ESSID in order to connect. A hidden
(disabled) ESSID is typically more secure than a
visible (enabled) SSID.
Wireless Client
Isolation
Load Balancing
Authentication
Method
Additional
Authentication
Enable or disable wireless client isolation.
Wireless client isolation prevents clients
connected to the access point from
communicating with each other and improves
security. Typically, this function is useful for
corporate environments or public hot spots
and can prevent brute force attacks on clients’
usernames and passwords.
Load balancing limits the number of wireless
clients connected to an SSID. Set a load
balancing value (maximum 50).
Select an authentication method from the drop
down menu and refer to the information
below appropriate for your method.
Select an additional authentication method
from the drop down menu and refer to the
information below appropriate for your
method.
Please refer back to IV‐3‐1‐3. Security for more information on authentication
and additional authentication types.
52
IV‐3‐2‐4. WDS
Wireless Distribution System (WDS) can
bridge/repeat access points together in an
extended network. WDS settings can be
configured as shown below.
When using WDS, configure the IP address of each access point to
be in the same subnet and ensure there is only one active DHCP
server among connected access points, preferably on the WAN
side.
WDS must be configured on each access point, using correct MAC addresses.
All access points should use the same wireless channel and WEP key.
53
WDS Functionality
Select “WDS with AP” to use WDS or “WDS
Dedicated Mode” to use WDS and also block
communication with regular wireless clients.
When WDS is used, each access point should
be configured with corresponding MAC
addresses, wireless channel and WEP key.
Local MAC Address Displays the MAC address of your access point.
54
WDS #
Enter the MAC address for up to four other
WDA devices you wish to connect.
VLAN Mode
VLAN ID
Specify the WDS VLAN mode.
Specify the WDS VLAN ID.
Encryption
Select whether to use “None” or “AES”
encryption and enter a pre‐shared key for AES.
IV‐3‐3.
WPS
Wi‐Fi Protected Setup is a simple way to
establish connections between WPS
compatible devices. WPS can be activated on compatible devices by pushing a
WPS button on the device or from within the device’s firmware/configuration
interface (known as PBC or “Push Button Configuration”). When WPS is
activated in the correct manner and at the correct time for two compatible
devices, they will automatically connect. “PIN code WPS” is a variation of PBC
which includes the additional use of a PIN code between the two devices for
verification.
Please refer to manufacturer’s instructions for your other WPS
device.
55
WPS
Check/uncheck this box to enable/disable WPS
functionality. WPS must be disabled when
using MAC‐RADIUS authentication (see
IV‐3‐1‐3‐6 & IV‐3‐4).
Product PIN
Displays the WPS PIN code of the device, used
for PIN code WPS. You will be required to enter
this PIN code into another WPS device for PIN
code WPS. Click “Generate PIN” to generate a
new WPS PIN code.
Click “Start” to activate WPS on the access
point for approximately 2 minutes. This has the
same effect as physically pushing the access
point’s WPS button.
Enter the PIN code of another WPS device and
click “Start” to attempt to establish a WPS
connection for approximately 2 minutes.
Push‐Button WPS
WPS by PIN
WPS Status
56
WPS security status is displayed here. Click
“Release” to clear the existing status.
IV‐3‐4.
RADIUS
The RADIUS sub menu allows you to configure the
access point’s RADIUS server settings, categorized
into three submenus: RADIUS settings, Internal Server and RADIUS accounts.
A RADIUS server provides user‐based authentication to improve security and
offer wireless client control – users can be authenticated before gaining
access to a network.
The access point can utilize both a primary and secondary (backup) RADIUS
server for each of its wireless frequencies (2.4GHz & 5GHz). External RADIUS
servers can be used or the access point’s internal RADIUS server can be used.
To use RADIUS servers, go to “Wireless Settings”  “Security” and
select “MAC RADIUS Authentication”  “Additional
Authentication” and select “MAC RADIUS Authentication” (see
IV‐3‐1‐3. & IV‐3‐2‐3).
57
IV‐3‐4‐1. RADIUS Settings
Configure the RADIUS server settings for
2.4GHz & 5GHz. Each frequency can use a
primary and secondary (backup) RADIUS server.
58
RADIUS Type
Select “Internal” to use the access point’s
built‐in RADIUS server or “external” to use an
external RADIUS server.
RADIUS Server
Enter the RADIUS server host IP address.
Authentication
Port
Set the UDP port used in the authentication
protocol of the RADIUS server. Value must be
between 1 – 65535.
Enter a shared secret/password between 1 –
99 characters in length. This should match the
“MAC‐RADIUS” password used in IV‐3‐1‐3‐6 or
IV‐3‐2‐3.
Set a duration of session timeout in seconds
between 0 – 86400.
Enable or disable RADIUS accounting.
Shared Secret
Session Timeout
Accounting
Accounting Port
59
When accounting is enabled (above), set the
UDP port used in the accounting protocol of
the RADIUS server. Value must be between 1 –
65535.
IV‐3‐4‐2. Internal Server
The access point features a built‐in RADIUS
server which can be configured as shown
below. used when “Internal” is selected for “RADIUS Type” in the “Wireless
Settings”  “RADIUS”  “RADIUS Settings” menu.
To use RADIUS servers, go to “Wireless Settings”  “Security” and
select “MAC RADIUS Authentication”  “Additional
Authentication” and select “MAC RADIUS Authentication” (see
IV‐3‐1‐3. & IV‐3‐2‐3).
Internal Server
EAP Internal
Authentication
EAP Certificate File
Format
EAP Certificate File
60
Check/uncheck to enable/disable the access
point’s internal RADIUS server.
Select EAP internal authentication type from
the drop down menu.
Displays the EAP certificate file format:
PCK#12(*.pfx/*.p12)
Click “Upload” to open a new window and
select the location of an EAP certificate file to
use. If no certificate file is uploaded, the
internal RADIUS server will use a self‐made
certificate.
Shared Secret
Enter a shared secret/password for use
between the internal RADIUS server and
RADIUS client. The shared secret should be 1 –
99 characters in length. This should match the
“MAC‐RADIUS” password used in IV‐3‐1‐3‐6 or
IV‐3‐2‐3.
Session Timeout
Set a duration of session timeout in seconds
between 0 – 86400.
Termination Action Select a termination‐action attribute:
“Reauthentication” sends a RADIUS request to
the access point, “Not‐Reathentication” sends
a default termination‐action attribute to the
access point, “Not‐Send” no
termination‐action attribute is sent to the
access point.
61
IV‐3‐4‐3. RADIUS Accounts
The internal RADIUS server can authenticate
up to 256 user accounts. The “RADIUS
Accounts” page allows you to configure and manage users.
62
User Name
Add
Reset
Select
User Name
Password
Customize
Delete Selected
Delete All
Enter a user name here.
Click “Add” to add the user to the user
registration list.
Clear text from the user name box.
Check the box to select a user.
Displays the user name.
Displays if specified user name has a password
(configured) or not (not configured).
Click “Edit” to open a new field to set/edit a
password for the specified user name (below).
Delete selected user from the user registration
list.
Delete all users from the user registration list.
Edit User Registration List
User Name
Password
63
Existing user name is displayed here and can
be edited according to your preference.
Enter or edit a password for the specified user.
IV‐3‐5.
MAC Filter
Mac filtering is a security feature that can
help to prevent unauthorized users from
connecting to your access point.
This function allows you to define a list of network devices permitted to
connect to the access point. Devices are each identified by their unique MAC
address. If a device which is not on the list of permitted MAC addresses
attempts to connect to the access point, it will be denied.
To enable MAC filtering, go to “Wireless Settings”  “2.4GHz
11bgn/5GHz 11ac 11an”  “Security”  “Additional
Authentication” and select “MAC Filter” (see IV‐3‐1‐3. & IV‐3‐2‐3).
The MAC address filtering table is displayed below:
64
Add MAC Address
Add
Reset
Enter a MAC address of computer or network
device manually without dashes or colons e.g.
for MAC address ‘aa‐bb‐cc‐dd‐ee‐ff’ enter
‘aabbccddeeff’.
Click “Add” to add the MAC address to the
MAC address filtering table.
Clear all fields.
MAC address entries will be listed in the “MAC Address Filtering Table”. Select
an entry using the “Select” checkbox.
Select
MAC Address
Delete Selected
Delete All
Backup
65
Delete selected or all entries from the table.
The MAC address is listed here.
Delete the selected MAC address from the
list.
Delete all entries from the MAC address
filtering table.
Click “Backup” to save a copy of the MAC
filtering table. A new window will pop up for
you to select a location to save the file.
IV‐3‐6. WMM
Wi‐Fi Multimedia (WMM) is a Wi‐Fi Alliance
interoperability certification based on the
IEEE 802.11e standard, which provides
Quality of Service (QoS) features to IEE 802.11 networks. WMM prioritizes
traffic according to four categories: background, best effort, video and voice.
Configuring WMM consists of adjusting parameters on queues for different
categories of wireless traffic. Traffic is sent to the following queues:
Background
Best Effort
Video
Voice
Low
Priority
Medium
Priority
High
Priority
High
Priority
High throughput, non time sensitive bulk
data e.g. FTP
Traditional IP data, medium throughput and
delay.
Time sensitive video data with minimum
time delay.
Time senstivie data such as VoIP and
streaming media with minimum time delay.
Queues automatically provide minimum transmission delays for video, voice,
multimedia and critical applications. The values can further be adjusted
manually:
66
CWMin
CWMax
AIFSN
TxOP
67
Minimum Contention Window (milliseconds):
This value is input to the initial random
backoff wait time algorithm for retry of a data
frame transmission. The backoff wait time will
be generated between 0 and this value. If the
frame is not sent, the random backoff value is
doubled until the value reaches the number
defined by CWMax (below). Valid values are
1,3,7,15,31,63,127,255,511 or 1024. The
CWMin value must be lower than the CWMax
value. The contention window scheme helps
to avoid frame collisions and determine
priority of frame transmission. A shorter
window has a higher probability (priority) of
transmission.
Maximum Contention Window (milliseconds):
This value is the upper limit to random
backoff value doubling (see above). Valid
values are 1,3,7,15,31,63,127,255,511 or
1024.
Arbitration Inter‐Frame Space (milliseconds):
Specifies additional time between when a
channel goes idle and the AP/client sends
data frames. Traffic with a lower AIFSN value
has a higher priority.
Transmission Opportunity (milliseconds): The
maximum interval of time an AP/client can
transmit. This makes channel access more
efficiently prioritized. A value of 0 means only
one frame per transmission. A greater value
effects higher priority.
IV‐4.
Management
Screenshots displayed are examples. The information shown on
your screen will vary depending on your configuration.
IV‐4‐1.
Admin
You can change the password used to login to
the browser‐based configuration interface here.
It is advised to do so for security purposes.
If you change the administrator password, please make a note
of the new password. In the event that you forget this
password and are unable to login to the browser based
configuration interface, see I‐5. Reset for how to reset the
access point.
68
Administrator
Name
Administrator
Password
Product Name
Management
Protocol
69
Set the access point’s administrator name.
This is used to log in to the browser based
configuration interface.
Set the access point’s administrator password.
This is used to log in to the browser based
configuration interface.
Edit the product name according to your
preference. This name is used for reference
purposes.
Check/uncheck the boxes to enable/disable
specified management interfaces (see below).
SNMP Version
SNMP Get
Community
SNMP Set
Community
SNMP Trap
SNMP Trap
Community
SNMP Trap
Manager
When SNMP is enabled, complete the SNMP
fields below.
Select SNMP version appropriate for your
SNMP manager.
Enter an SNMP Get Community name for
verification with the SNMP manager for
SNMP‐GET requests.
Enter an SNMP Set Community name for
verification with the SNMP manager for
SNMP‐SET requests.
Enable or disable SNMP Trap to notify SNMP
manager of network errors.
Enter an SNMP Trap Community name for
verification with the SNMP manager for
SNMP‐TRAP requests.
Specify the IP address or sever name
(maximum 128 characters) of the SNMP
manager.
HTTP
Internet browser HTTP protocol management interface
HTTPS
Internet browser HTTPS protocol management interface
TELNET
Client terminal with telnet protocol management interface
SSH
Client terminal with SSH protocol version 1 or 2 management interface
SNMP
Network management protocol. SNMPv1, v2 & v3 protocol supported.
SNMPv2 can be used with community based authentication. SNMPv3 uses
user‐based security model (UM) architecture.
FTPD
Third party FTP server.
SNMP
Third party TFTP server.
70
IV‐4‐2.
Date and Time
You can configure the time zone settings of your
access point here. The date and time of the
device can be configured manually or can be synchronized with a time server.
Local Time
Set the access point’s date and time manually
using the drop down menus.
Click “Acquire Current Time from Your PC” to
Acquire Current
Time from your PC enter the required values automatically
according to your computer’s current time and
date.
Use NTP
Server Name
71
The access point also supports NTP (Network
Time Protocol) for automatic time and date
setup.
Enter the host name or IP address of the time
server if you wish.
72
Update Interval
Specify a frequency (in hours) for the access
point to update/synchronize with the NTP
server.
Time Zone
Select the time zone of your country/ region. If
your country/region is not listed, please select
another country/region whose time zone is the
same as yours.
IV‐4‐3.
Syslog Server
The system log can be sent to a server or
to attached USB storage.
Transfer Logs
Check/uncheck the box to enable/disable the
use of a syslog server, and enter a host
name, domain or IP address for the server,
consisting of up to 128 alphanumeric
characters.
Check/uncheck the box to enable/disable
Copy Logs to
Attached USB Device copying logs to attached USB storage.
73
IV‐4‐4.
I’m Here
The access point features a built‐in buzzer
which can sound on command using the “I’m
Here” page. This is useful for network administrators and engineers working
in complex network environments to locate the access point.
The buzzer is loud!
Duration of Sound
Sound Buzzer
74
Set the duration for which the buzzer will
sound when the “Sound Buzzer” button is
clicked.
Activate the buzzer sound for the above
specified duration of time.
IV‐5.
Advanced
Screenshots displayed are examples. The information shown on
your screen will vary depending on your configuration.
IV‐5‐1.
LED Settings
The access point’s LEDs can be manually
enabled or disabled according to your
preference.
Power LED
Diag LED
75
Select on or off.
Select on or off.
IV‐5‐2.
Update Firmware
The “Firmware” page allows you to update
the system firmware to a more recent
version. Updated firmware versions often
offer increased performance and security, as well as bug fixes. You can
download the latest firmware from the Edimax website.
Do not switch off or disconnect the access point during a firmware
upgrade, as this could damage the device.
Select to upload firmware from your local
Update Firmware
From
computer or from an attached USB device.
Firmware Update File Click “Browse” to open a new window to
locate and select the firmware file in your
computer.
Update
Click “Update” to upload the specified
firmware file to your access point.
76
IV‐5‐3.
Save/Restore Settings
The access point’s “Save/Restore Settings”
page enables you to save/backup the access
point’s current settings as a file to your local computer or a USB device
attached to the access point, and restore the access point to previously saved
settings.
77
Using Device
Select to save the access point’s settings to
your local computer or to an attached USB
device.
Save Settings
Click “Save” to save settings and a new
window will open to specify a location to
save the settings file. If saving settings to
your computer, you can also check the
“Encrypt the configuration file with a
password” box and enter a password to
protect the file in the field underneath, if you
wish.
Restore Settings
78
Click the browse button to find a previously
saved settings file and then click “Restore” to
replace your current settings. If your settings
file is encrypted with a password, check the
“Open file with password” box and enter the
password in the field underneath.
IV‐5‐4.
Factory Default
If the access point malfunctions or is not
responding, then it is recommended that you
reboot the device (see IV‐5.5) or reset the device back to its factory default
settings. You can reset the access point back to its default settings using this
feature if the location of the access point is not convenient to access the reset
button.
Factory Default
Click “Factory Default” to restore settings to
the factory default. A pop‐up window will
appear and ask you to confirm.
After resetting to factory defaults, please wait for the access
point to reset and restart.
79
IV‐5‐5.
Reboot
If the access point malfunctions or is not
responding, then it is recommended that
you reboot the device or reset the access point back to its factory default
settings (see IV‐5‐4). You can reboot the access point remotely using this
feature.
Reboot
80
Click “Reboot” to reboot the device. A
countdown will indicate the progress of the
reboot.
V. Appendix
V‐1.
Configuring your IP address
The access point uses the default IP address 192.168.2.2. In order to access
the browser based configuration interface, you need to modify the IP address
of your computer to be in the same IP address subnet e.g. 192.168.2.x (x = 3 –
254).
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system.
In the following examples we use the IP address 192.168.2.10 though you can
use any IP address in the range 192.168.2.x (x = 3 – 254).
81
V‐1‐1.
1.
2.
Windows XP
Click the “Start” button (it should be located in the lower‐left corner of
your computer), then click “Control Panel”. Double‐click the “Network and
Internet Connections” icon, click “Network Connections”, and then
double‐click “Local Area Connection”. The “Local Area Connection Status”
window will then appear, click “Properties”.
Select “Use the following IP address”, then input the following values:
IP address: 192.168.2.10
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
82
83
V‐1‐2.
1.
2.
Windows Vista
Click the “Start” button (it should be located in the lower‐left corner of
your computer), then click “Control Panel”. Click “View Network Status and
Tasks”, then click “Manage Network Connections”. Right‐click “Local Area
Network”, then select “Properties”. The “Local Area Connection Properties”
window will then appear, select “Internet Protocol Version 4 (TCP / IPv4)”,
and then click “Properties”.
Select “Use the following IP address”, then input the following values:
IP address: 192.168.2.10
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
84
85
V‐1‐3.
Windows 7
1.
Click the “Start” button (it should be located in the lower‐left corner of
your computer), then click “Control Panel”.
2.
Under “Network and Internet” click “View network status and tasks”.
3.
Click “Local Area Connection”.
86
4.
87
Click “Properties”.
5.Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
6.
Select “Use the following IP address”, then input the following values:
IP address: 192.168.2.10
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
88
89
V‐1‐4.
Windows 8
1.
From the Windows 8 Start screen, you need to switch to desktop mode.
Move your curser to the bottom left of the screen and click.
2.
In desktop mode, click the File Explorer icon in the bottom left of the
screen, as shown below.
90
3.
Right click “Network” and then select “Properties”.
4.
In the window that opens, select “Change adapter settings” from the left
91
side.
5.
92
Choose your connection and right click, then select “Properties”.
6.
Select “Internet Protocol Version 4 (TCP/IPv4) and then click “Properties”.
7.
Select “Use the following IP address”, then input the following values:
IP address: 192.168.2.10
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
93
IV‐1‐5. Mac
1.
Have your Macintosh computer operate as usual, and click on “System
Preferences”
2.
In System Preferences, click on “Network”.
3.
Click on “Ethernet” in the left panel.
4.
94
Open the drop‐down menu labeled “Configure IPv4” and select
“Manually”.
5.
95
Enter the IP address 192.168.2.10 and subnet mask 255.255.255.0. Click
on “Apply” to save the changes.
V‐1‐6. Glossary
Default Gateway (Access point): Every non‐access point IP device needs to
configure a default gateway’s IP address. When the device sends out an IP
packet, if the destination is not on the same network, the device has to send
the packet to its default gateway, which will then send it out towards the
destination.
DHCP: Dynamic Host Configuration Protocol. This protocol automatically gives
every computer on your home network an IP address.
DNS Server IP Address: DNS stands for Domain Name System, which allows
Internet servers to have a domain name (such as www.Broadbandaccess
point.com) and one or more IP addresses (such as 192.34.45.8). A DNS server
keeps a database of Internet servers and their respective domain names and
IP addresses, so that when a domain name is requested (as in typing
"Broadbandaccess point.com" into your Internet browser), the user is sent to
the proper IP address. The DNS server IP address used by the computers on
your home network is the location of the DNS server your ISP has assigned to
you.
DSL Modem: DSL stands for Digital Subscriber Line. A DSL modem uses your
existing phone lines to transmit data at high speeds.
Ethernet: A standard for computer networks. Ethernet networks are
connected by special cables and hubs, and move data around at up to 10/100
million bits per second (Mbps).
IP Address and Network (Subnet) Mask: IP stands for Internet Protocol. An IP
address consists of a series of four numbers separated by periods, that
identifies a single, unique Internet computer host in an IP network. Example:
192.168.2.1. It consists of 2 portions: the IP network address, and the host
identifier.
The IP address is a 32‐bit binary pattern, which can be represented as four
cascaded decimal numbers separated by “.”: aaa.aaa.aaa.aaa, where each
“aaa” can be anything from 000 to 255, or as four cascaded binary numbers
separated by “.”: bbbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb, where each “b”
can either be 0 or 1.
96
A network mask is also a 32‐bit binary pattern, and consists of consecutive
leading 1’s followed by consecutive trailing 0’s, such as
11111111.11111111.11111111.00000000. Therefore sometimes a network
mask can also be described simply as “x” number of leading 1’s.
When both are represented side by side in their binary forms, all bits in the IP
address that correspond to 1’s in the network mask become part of the IP
network address, and the remaining bits correspond to the host ID.
For example, if the IP address for a device is, in its binary form,
11011001.10110000.10010000.00000111, and if its network mask is,
11111111.11111111.11110000.00000000
It means the device’s network address is
11011001.10110000.10010000.00000000, and its host ID is,
00000000.00000000.00000000.00000111. This is a convenient and efficient
method for access points to route IP packets to their destination.
ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an
IP address for the Internet access point located at the ISP's office.
ISP: Internet Service Provider. An ISP is a business that provides connectivity
to the Internet for individuals and other businesses or organizations.
LAN: Local Area Network. A LAN is a group of computers and devices
connected together in a relatively small area (such as a house or an office).
Your home network is considered a LAN.
MAC Address: MAC stands for Media Access Control. A MAC address is the
hardware address of a device connected to a network. The MAC address is a
unique identifier for a device with an Ethernet interface. It is comprised of
two parts: 3 bytes of data that corresponds to the Manufacturer ID (unique
for each manufacturer), plus 3 bytes that are often used as the product’s
serial number.
NAT: Network Address Translation. This process allows all of the computers
on your home network to use one IP address. Using the broadband access
point’s NAT capability, you can access the Internet from any computer on
your home network without having to purchase more IP addresses from your
ISP.
Port: Network Clients (LAN PC) uses port numbers to distinguish one network
application/protocol over another. Below is a list of common applications and
protocol/port numbers:
97
Application Protocol Port Number
Telnet
TCP
23
FTP
TCP
21
SMTP
TCP
25
POP3
TCP
110
H.323
TCP
1720
SNMP
UCP
161
SNMP Trap UDP
162
HTTP
TCP
80
PPTP
TCP
1723
PC Anywhere TCP
5631
PC Anywhere UDP
5632
Access point: A access point is an intelligent network device that forwards
packets between different networks based on network layer address
information such as IP addresses.
Subnet Mask: A subnet mask, which may be a part of the TCP/IP information
provided by your ISP, is a set of four numbers (e.g. 255.255.255.0) configured
like an IP address. It is used to create IP address numbers used only within a
particular network (as opposed to valid IP address numbers recognized by the
Internet, which must be assigned by InterNIC).
TCP/IP, UDP: Transmission Control Protocol/Internet Protocol (TCP/IP) and
Unreliable Datagram Protocol (UDP). TCP/IP is the standard protocol for data
transmission over the Internet. Both TCP and UDP are transport layer protocol.
TCP performs proper error detection and error recovery, and thus is reliable.
UDP on the other hand is not reliable. They both run on top of the IP (Internet
Protocol), a network layer protocol.
WAN: Wide Area Network. A network that connects computers located in
geographically separate areas (e.g. different buildings, cities, countries). The
Internet is a wide area network.
Web‐based management Graphical User Interface (GUI): Many devices
support a graphical user interface that is based on the web browser. This
means the user can use the familiar Netscape or Microsoft Internet Explorer
to Control/configure or monitor the device being managed.
98
COPYRIGHT
Copyright  Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right
to revise this publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. The software and specifications are subject to change without
notice. Please visit our website www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of their
respective holders.
99
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co‐located or operating in conjunction with any other antenna or
transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any changes or modifications not expressly
approved by the party responsible for compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND
THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
EU Declaration of Conformity
English:
Français:
100
This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.
Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 1999/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE.
Čeština:
Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 1999/5/ES, 2009/125/ES, 2006/95/ES, 2011/65/ES.
Polski:
Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC..
Română:
Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 1999/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE.
Русский:
Это оборудование соответствует основным требованиям и положениям Директивы
1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.
Magyar:
Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(1999/5/EK, 2009/125/EK, 2006/95/EK, 2011/65/EK).
Türkçe:
Bu cihaz 1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC direktifleri zorunlu istekler ve
diğer hükümlerle ile uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 1999/5/EC, 2009/125/EC,
2006/95/EC, 2011/65/EC..
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
1999/5/ES, 2009/125/ES, 2006/95/ES, 2011/65/ES.
Deutsch:
Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 1999/5/EC, 2009/125/EC,
2006/95/EC, 2011/65/EC.
Español:
El presente equipo cumple los requisitos esenciales de la Directiva 1999/5/EC,
2009/125/EC, 2006/95/EC, 2011/65/EC.
Italiano:
Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 1999/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC..
Português: Este equipamento cumpre os requesitos essênciais da Directiva 1999/5/EC, 2009/125/EC,
2006/95/EC, 2011/65/EC.
Norsk:
Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.
Svenska:
Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 1999/5/EG, 2009/125/EG, 2006/95/EG, 2011/65/EG.
Dansk:
Dette udstyr er i overensstemmelse med de væsentligste krav og andre relevante
forordninger i direktiv 1999/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC.
suomen kieli: Tämä laite täyttää direktiivien 1999/5/EY, 2009/125/EY, 2006/95/EY, 2011/65/EY
oleelliset vaatimukset ja muut asiaankuuluvat määräykset.
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
101
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directive 1999/5/EC, and 2009/125/EC, 2006/95/EC, 2011/65/EC .
Equipment:
Model No.:
N300 Wall‐plug Access Point
EW‐7438APn
The following European standards for essential requirements have been followed:
Spectrum:
EMC:
EMF:
Safety (LVD):
ETSI EN 300 328 V1.7.1 (2006‐10)
EN 301 489‐1 V1.9.2 (2011‐09);
EN 301 489‐17 V2.1.1 (2009‐05)
EN 50385:2002
IEC 60950‐1:2005 (2nd Edition);
EN‐60950‐1:2006+A11:2009+A1:2010+A12:2011
Edimax Technology Co., Ltd.
No. 3, Wu Chuan 3rd Road,
Wu‐Ku Industrial Park,
New Taipei City, Taiwan
Date of Signature: November 15, 2011
Signature:
Printed Name:
Title:
102
Albert Chang
Director
Edimax Technology Co., Ltd.
Notice According to GNU General Public License Version 2
This product includes software that is subject to the GNU General Public License version 2. The program is free software and
distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more
than the costs of physically performing source distribution, a complete machine‐readable copy of the corresponding source
code.
Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL‐Version 2 unterliegt. Das Programm ist eine sog. „Free
Software“, der Autor stellt das Programm ohne irgendeine Gewährleistungen zur Verfügung. Wir bieten Ihnen für einen
Zeitraum von drei Jahren an, eine vollständige maschinenlesbare Kopie des Quelltextes der Programme zur Verfügung zu
stellen – zu nicht höheren Kosten als denen, die durch den physikalischen Kopiervorgang anfallen.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110‐1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software‐‐to make sure the software is free
for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other
program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive
source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that
you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights
that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms
so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for
this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have
made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a
‘“work based on the Program’“ means either the Program or any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a
work based on the Program (independent of having been made by running the Program). Whether that is true depends on
what the Program does.
103
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a)
You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as
part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent
is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under
the terms of Sections 1 and 2 above provided that you also do one of the following:
a)
Accompany it with the complete corresponding machine‐readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine‐readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the executable. However, as a special exception, the source code
distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights
under this License. However, parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
104
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent license would not permit royalty‐free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity
of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system,
which is implemented by public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such
case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies
to it and ‘“any later version’“, you have the option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Program does not specify a version number of this License, you
may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
105
106

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2014:06:09 09:40:16+08:00
Modify Date                     : 2014:06:09 09:40:16+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:3844dfe8-7a00-4339-a8c7-b69022011d55
Instance ID                     : uuid:7b480905-92ce-4e75-b13d-3ca9d6c6ccf1
Page Count                      : 106

EXIF Metadata provided by EXIF.tools