Electro Voice Evh 1152S 43 Users Manual
EVH-1152S43 to the manual 572114e2-a939-4d6a-b794-37700842ca87
2015-02-06
: Electro-Voice Electro-Voice-Evh-1152S-43-Users-Manual-539384 electro-voice-evh-1152s-43-users-manual-539384 electro-voice pdf
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
EVH-1152S/43 Single 15” Two-Way Coaxial 40° x 30° Full-Range High Efficiency Loudspeaker System Key Features: • • • • • • • • • ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit Pure Titanium Compression Driver SMX2151 15” (381mm) LF Transducer with Fully Symmetric Drive Advanced 4th Order Crossover Network with HF Protection Coverage Pattern: 40° x 30° Constant DirectivityTM Rotatable Waveguides 106 dB Sensitivity, 139 dB Maximum SPL System Rating: 500W Continuous, (2000W Peak) Active Rating: LF400W/HF40W Continuous (1600W/160W Peak) (28) M10 Threaded Suspension Points PI Version Available with Gland Nut and Stainless Steel Grille General Description: Technical Specifications: Freq. Response1 (-3 dB): Freq. Range1 (-10 dB): Rec. Hipass Frequency: Axial Sensitivity: Max. Calculated SPL: Horizontal Coverage: Vertical Coverage: Power Handling: LF Transducer: HF Transducer: The Electro-Voice® EVH-1152S/43 is a high power, 2-way Horn loaded coaxial loudspeaker system that can be used in a variety of applications where excellent quality sound reinforcement , wide bandwidth directivity control , and high efficiency are required in a compact package. The EVH-1152S/43 utilizes an ND2B and an SMX2151. The ND2B is a high output 2” titanium compression driver, coupled to a rotatable 12” x 12” Constant Directivity™ 40° x 30° waveguide. The new SMX2151 is a high output, low distortion 15” woofer. Developed by EV engineering the motor, suspension, and electrical characteristics of the woofer are optimized to maximize efficiency and minimize distortion. The passive crossover network employs 24 dB/octave slopes for a smooth response in the vocal range, linear off-axis response, and features a comprehensive protection circuit for long term reliability. This combination of technologies results in a smooth response to 16 kHz and excellent pattern control down to 500Hz. Crossover Frequency: Nominal Impedance: Minimum Impedance: Connectors: The EVH-1152S/43 features make it ideal for any fixed install application. The trapezoidal enclosure is constructed out of 13 ply, 18mm birch, and coated with EVCoatTM for maximum protection from the elements. PI weather resistant models uses a stainless steel grill grille backed with multiple material layers to prevent weather or humidity ingress. The EVH family of models employ an intelligent combination of superior acoustic design and rigging which allow for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF & EVH Series. 28 suspension points for use with rated eyebolts or EV –I cluster hardware provide low cost, simple rigging solutions. With 6 horn patterns to choose from and an assortment of low frequency and subwoofer loudspeakers, EVH provides you the tools to easily design a custom tailored solution, no matter what the application or budget. The innovative input panel can be customized to one of three input choices, including a phoenix style connector (included in all standard models), dual NL4 type connectors (sold separately), or a gland nut cover plate (for weatherizing applications). An externally accessible jumper selects passive or active operation. An available 70.7/100 Volt transformer kit can be easily installed for use in distributed systems. Enclosure Material: Grille: Environmental Specs: Suspension: Dimensions (H x W x D): Net Weight: Shipping Weight: 1 Half Space Measurement. 60 Hz - 15 kHz 50 Hz - 16 kHz 60 Hz 106 dB (1W/1m) 139 dB 40° (or 30°) 30° (or 40°) 500W Continuous, 2000W Peak SMX2151, 15 in (381mm) Driver ND2B, 2 in (51mm) Diaphragm Compression Driver 1300 Hz 8 Ohms 6.0 Ohms (2) 4 Contact 10 PI Version AWG (2.6mm) Phoe- Gland Nut with nix/EuroBlock Style Included Input Screw Terminals Panel Cover 13 Ply Weather Resistant Birch 16 GA Galvanneal, PI Version Powdercoat, with Stainless Steel Rotatable Logo with Hydrophobic Cloth Std. Version - IP33 PI/FG - IP55 (28) M10 Threaded Points 30.26” x 30.26” x 26.77” (768.6mm x 768.6mm x 680.1mm) 143 lbs (64.9 kg) 158 lbs (71.8 kg) EVH-1152S/43 Loudspeaker System Horizontal Off Axis Frequency Response: 316 110 100 100 100 90 Passive Mode, Half Space Impedance 20 50 100 1000 70 3.16 20000 10000 90 80 10 80 70 Sensitivity (dB) 110 Impedance (Ohms) Sensitivity (dB) Frequency Response & Impedance: 20 50 100 On Axis 10° Horizontal 20° Horizontal 30° Horizontal 1000 10000 20000 Frequency (Hz) Frequency (Hz) Vertical Off Axis Frequency Response: 110 Sensitivity (dB) 100 90 80 On Axis 70 20 50 100 10° Vertical 1000 20° Vertical 10000 20000 Frequency (Hz) -6dB Beamwidth (degrees) Horizontal Vertical rhvalues 360 200 200 100 100 50 50 20 20 10 10 3.6 20 100 Frequency (Hz) 1000 10000 Block Diagram (Biamp): 3.6 20000 Directivity Index (DI), dB Beam w idth (First Crossing) 360 30 1000 20 100 10 10 0 20 100 1000 10000 Frequency (Hz) Block Diagram (Passive): 1 20000 Directivity Factor (Q) Directivity: Beamwidth: Engineering Data Sheet Polar Plots (1/3 Octave): 400 Hz 500 Hz 1 KHz 1.25 KHz 2.5 KHz 3.15 KHz 6.3 KHz 8 KHz 16 KHz 20 KHz 630 Hz 1.6 KHz 800 Hz 2 KHz 4 KHz 5 KHz 10 KHz 12.5 KHz Horizontal = Black Vertical = Grey Dimension Drawings: End View Front View Side View EVH-1152S/43 Part Numbers • PRD000265-001 EVH-1152S/43-BLK, 40° x 30°, Black Finish • PRD000265-002 EVH-1152S/43-WHT, 40° x 30°, White Finish • PRD000265-003 EVH-1152S/43-PIB, 40° x 30°, Black Finish, Weather Resistant • PRD000265-004 EVH-1152S/43-PIW, 40° x 30°, White Finish, Weather Resistant • PRD000265-005 EVH-1152S/43-FGB, 40° x 30°, Black Finish, Weather Resistant Fiberglass • PRD000265-006 EVH-1152S/43-FGW, 40° x 30°, White Finish, Weather Resistant Fiberglass Performance Match • • • • • • • • • • • • PRD000211 PRD000212 PRD000213 PRD000214 PRD000215 PRD000216 PRD000217 PRD000218 F.01U.076.843 F.01U.076.844 D170469 D170466 EVF-1121S, 12” Bass Element EVF-1151S, 15” Bass Element EVF-1181S, 18” Bass Element EVH-1152S/64, Coaxial 60° x 40° Coverage EVH-1152S/66, Coaxial 60° x 60° Coverage EVH-1152S/94, Coaxial 90° x 40° Coverage EVH-1152S/96, Coaxial 90° x 60° Coverage EVH-1152S/99, Coaxial 90° x 90° Coverage CPS2.9, 120V Power Amplifier, 2 x 900W CPS2.12, 120V Power Amplifier, 2 x 1200W CPS4.5, 120V Power Amplifier, 4 x 500W CPS4.10, 120V Power Amplifier, 4 x 1000W Electro-Voice® 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www.electrovoice.com © Bosch Communications Systems Part Number LIT000281005 Rev A 01/2010 Rear View CAUTION This EVH Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the EVF/EVH Users Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances. Accessories • • • • • • • • • • • • • • • • ACC000084-000 ACC000085-000 ACC000086-000 ACC000087-000 ACC000089-001 ACC000089-002 ACC000090-001 ACC000090-002 ACC000091-001 ACC000091-002 ACC000092-001 ACC000092-002 ACC000093-001 ACC000093-002 ACC000094-001 ACC000094-002 CDNL4, Cover Plate, Dual NL4 CSG, Cover Plate, Single Gland Nut CDG, Cover Plate, Dual Gland Nut TK-150, 70V Transformer, 150W HRK-1B, Horiz. Rigging Kit, EVF, Black HRK-1W, Horiz. Rigging Kit, EVF, White HRK-2B, Horiz. Rigging Kit, EVF-SUB, Black HRK-2W, Horiz. Rigging Kit, EVF-SUB, White HRK-3B, Horiz. Rigging Kit, EVH, Black HRK-3W, Horiz. Rigging Kit, EVH, White VRK-1B, Vert. Rigging Kit, EVF, Black VRK-1W, Vert. Rigging Kit, EVF, White VRK-2B, Vert. Rigging Kit, EVF-SUB, Black VRK-2W, Vert. Rigging Kit, EVF-SUB, White VRK-3B, Vert. Rigging Kit, EVH, Black VRK-3W, Vert. Rigging Kit, EVH, White U.S.A. and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other Internatonal locations. For customer orders, Contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24 Instance ID : uuid:c14f6dcd-24f9-49c6-ad60-f05067e8d8ee Document ID : adobe:docid:indd:7b051d46-0126-11df-b8fd-c1b97bdfc13d Rendition Class : proof:pdf Derived From Instance ID : 0806059d-fba7-11de-bea7-e4fa9efb9d70 Derived From Document ID : adobe:docid:indd:0806059c-fba7-11de-bea7-e4fa9efb9d70 Manifest Link Form : ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches Manifest Reference Instance ID : uuid:fe3fd946-3f37-11da-9ce7-000d936d2e08, uuid:C29D8FED8946DC118DDAECA10C30D097 Manifest Reference Document ID : uuid:1eee1406-6652-11d9-a18c-000d936d2e08, uuid:C19D8FED8946DC118DDAECA10C30D097 Create Date : 2010:01:14 10:04:35-06:00 Modify Date : 2010:01:14 10:04:44-06:00 Metadata Date : 2010:01:14 10:04:44-06:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 12451 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CS3 (5.0)EXIF Metadata provided by EXIF.tools