Electronic Systems Technology ESTEEM195ED Wireless LAN transceiver User Manual 195Ed Chapter 0 Front Cover 195Ed

Download:
Mirror Download [FCC.gov]
Document ID	985914
Application ID	mtEmLM/sjT6R7SwzHxPXiQ==
Document Description	Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	220.98kB (2762228 bits)
Date Submitted	2008-08-15 00:00:00
Date Available	2008-08-15 00:00:00
Creation Date	2008-08-15 15:32:58
Producing Software	GPL Ghostscript 8.61
Document Lastmod	2008-08-15 15:33:18
Document Title	195Ed Chapter 0 - Front Cover 195Ed
Document Creator	PDFCreator Version 0.9.5
Document Author:	Marske

ESTeem MODEL 195Ed
USER’S MANUAL
Manual Revision 1.0
June 2008
Electronic Systems Technology, Inc.
ESTeem MODEL 195Ed
USER’S MANUAL
Manual Revision 1.0
Firmware Version 302.8.102 and above
June 2008
Prepared by:
Name:
Title:
Eric P. Marske
Product Manager
Date:
Approved by:
Name:
Title:
Tom L. Kirchner
President
Date:
WARRANTY INFORMATION
Electronic Systems Technology, Inc., (dba ESTeem Wireless Modems here after EST) expressly warrants its products as free of manufacturing
defects for a period of one year from the date of sale to first user/customer.
THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED AND THERE IS EXPRESSLY EXCLUDED ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO OTHER WARRANTY GIVEN BY ANY EMPLOYEE, AGENT,
DISTRIBUTOR OR OTHER PERSON WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON EST.
COPYRIGHT INFORMATION
This manual and the firmware described in it are copyrighted by EST, with all rights reserved. Under the copyright laws, this manual or the firmware
internal to the ESTeem unit may not be copied, in whole or part, without the written consent of EST. Under the law, copying includes translating into
another language.
EST cannot guarantee that you will receive notice of a revision to the firmware described in the manual, even if you have returned a
registration/warranty card received with the product. You should periodically check with your authorized EST dealer or call factory direct.
EST and the ESTeem logo are registered trademarks of Electronic Systems Technology, Inc. Simultaneously published in the United States and
Canada. All rights reserved.
LIMITATION OF LIABILITY:
EST's liability shall be limited to refunding of purchase price, repair or replacement of product.
IN NO EVENT SHALL EST HAVE LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES CAUSED
DIRECTLY OR INDIRECTLY BY THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY INTERRUPTION OF SERVICES, LOSS OF
BUSINESS OR ANTICIPATORY PROFITS. IN NO EVENT SHALL EST BE LIABLE FOR ANY DAMAGES WHATSOEVER IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT.
In the event that a unit or part requires replacement or factory servicing, the following conditions apply:
a)
b)
Customer must obtain from EST an authorized RMA (Return Materials Authorization) number (call 509-735-9092 Customer Support)
before shipment of product or parts to EST for any reason;
If the whole unit is shipped, it must be in its original carton and shipping components, or a carton and shipping components supplied by
EST, or if parts only are shipped, they must be packaged and cushioned so as to prevent damage in transit and shipped freight prepaid;
PRODUCT WILL BE CONSIDERED OUT OF WARRANTY IF:
a)
b)
c)
d)
e)
If the product is damaged due to improper or abnormal use, abuse, mishandling, accident or improper maintenance or failure to follow
operating instruction;
If the product is defective as a result of sand, dirt, or water damage;
If any factory-sealed enclosure has been opened or shows evidence of an attempt to be opened;
If defects or damage are caused by the use of unauthorized parts or unauthorized service;
If the product has had its serial numbers altered or removed.
Warranty repair form must be accompanied by proof of user's purchase of unit. Product must be shipped to the manufacturer at the following
address:
ESTeem Wireless Modems
415 North Quay Street
Building B-1
Kennewick, Washington USA 99336
ADDITIONAL SERVICE:
If EST releases an improvement update to firmware internal to the ESTeem unit during the 90 day period after the unit was purchased by the first
user/customer, EST will update the applicable unit with the revised version at no charge other than for UPS handling and shipping to and from your
location to the EST factory. Return of any such item must be accompanied with proof of purchase.
TABLE OF CONTENTS
CHAPTER 1 – INTRODUCTION
Before You Begin
1-1
Model 195Ed Overview
1-1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1-1
1-2
1-3
1-3
1-3
1-4
Model 195Ed Access Point Configurations
Figure 1: Single Access Point Bridge Diagram
Figure 2: Multiple Access Point Bridge Diagram
Figure 3: Access Point Router Diagram
Figure 4: Access Point Masquerade Diagram
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2-1
2-1
2-1
2-2
2-2
Model 195Ed Access Point Repeater with Clients Configurations
Figure 5: Access Point Bridge Repeater with Clients Diagram
Figure 6: Access Point Router Repeater with Clients Diagram
Figure 7: Access Point Masquerade Repeater with Clients Diag.
-------------------------------------------------------------------------------------------------------------------------------------
2-3
2-3
2-3
2-4
Model 195Ed Building to Building Configurations
Figure 8: Building to Building Configuration Diagram
Figure 9: Building to Building with Repeater Diagram
Figure 10: Building to Building Router Diagram
-------------------------------------------------------------------------------------------------------------------------------------
2-4
2-4
2-5
2-5
Model 195Ed Complete Wireless Solutions
Figure 11: Complete Bridge Network Solutions Diagram
Figure 12: Complete Router Network Solutions Diagram
-----------------------------------------------------------------------------------------
2-6
2-6
2-7
Model 195Ed Serial Network Configurations
Figure 13: Point to Point Serial Diagram
Figure 14: Point to Point with Repeater Serial Diagram
Figure 15: Multi-point Serial Diagram
Figure 16: Ethernet and Serial Diagram
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2-8
2-8
2-8
2-9
2-9
Overview
Quick Start Guide
---------------------------------------------
3-1
3-1
Model 195Ed Hardware Layout
Required Hardware
Front Panel Overlay Diagram
Antenna Port Overview
Antenna Configuration
Hardware Configuration Diagram
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3-1
3-1
3-2
3-2
3-3
3-3
Model 195Ed Configuration Modes
Access Point Modes
Access Point Repeater
Self-Healing Mesh Network
Station Mobile Client Modes
Serial Applications (Optional)
CHAPTER 2 – CONFIGURATION DIAGRAMS
CHAPTER 3 – STARTING OUT
Revised: 11 Aug 08
Page 1
EST P/N AA107D
TABLE OF CONTENTS
ESTeem Discovery Utility
Installation
Operation
Configuring the IP Address
-------------------------------------------------------------------------------------------------------------------------------------
3-5
3-5
3-6
3-6
Using The RS-232 Interface
Installing ESTeem Utility Program
Programming Using the RS-232 Port
-----------------------------------------------------------------------------------------
3-7
3-7
3-7
CHAPTER 4 – WEB CONFIGURATION
4-1
Logging Into Web Configuration Manager
Web Configuration Manager
Top Menu Description
Setting ModemID Field
Status Menu Description
System Log Screen Description
Setup Screen Description
Advanced Configuration Screen Description
Backup Screen Description
Restore Screen Description
Software Update Description
System Reboot Description
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4-2
4-2
4-2
4-3
4-5
4-5
4-6
4-6
4-7
4-8
4-8
-------------------------------------------------------------------------------------------------------------------------------------
5-1
5-1
5-2
5-2
CHAPTER 5 – EXAMPLE CONFIGURATIONS
Programming Example
Programming Example #1 Diagram
Programming Example #2 Diagram
Table 1: Example System Configuration Table
Example 1 – Plant Network (Access Point Router Repeater)
5-3
Example 2 –Repeater (Access Point Bridge Repeater)
5-13
Example 3 – Remote Building (Access Point Bridge Repeater)
5-18
Example 4 – EtherStation Mode
5-19
Example 5 – Station Router Mode
5-21
Example 6 – Station Masquerade Mode
5-25
CHAPTER 6 – SERIAL APPLICATIONS
6-1
Serial Overview
Serial Connections
Configuring Second Ethernet Port
---------------------------------------------
6-1
Serial Configuration
Revised: 11 Aug 08
6-1
6-1
Page 2
EST P/N AA107D
TABLE OF CONTENTS
CHAPTER 7 – REPEATING FEATURES
Overview
ESTeem Mesh Network
Configuration
---------------------------------------------
7-1
7-1
7-1
Spanning Tree Protocol (STP)
Overview
Phases
Priority and Path Cost
Root Bridge
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
7-2
7-2
7-3
7-4
7-4
7-5
Redundant Backup
CHAPTER 8 – ANTENNA SETUPS
Antenna and Cable Configurations
8-1
Antenna Diversity
8-2
Antenna Port Selection
8-2
Coaxial Cable Attenuation
8-3
Assembling the AA195PM Outdoor Pole Mounting Kit
8-4
Model 195Ed Direct Mount Antennas with Surge Protection
Model 195Ed Series with External Mount Antenna
Model 195Ed External Mount Antenna with Surge Protection
8-10
8-11
8-12
Fresnel Zone
8-13
APPENDIX A – FCC-DOC INFORMATION
APPENDIX B – SPECIFICATIONS
195Ed Specifications
Case Diagram
Antenna Specifications
-------------------------------------------------------------------------------------------------------------------------------------
B-1
B-2
B-3
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
C-1
C-1
C-2
C-2
-----------------------------------------------------------------------------------------
D-1
D-1
APPENDIX C – INTERFACE PORTS
Ethernet Interface
Setting DHCP Server
RS-232 Programming Port Pin-Out
RS-232 Data Port Pin-Out
APPENDIX D – RADIO CONFIGURATION
Frequency of Operation
Setting Data Rates
Revised: 11 Aug 08
Page 3
EST P/N AA107D
TABLE OF CONTENTS
APPENDIX E – SECURITY
APPENDIX F – TROUBLESHOOTING
Testing Communication Link
Viewing RF Data Rates
Signal Strength vs Data Rates
Setting Maximum Distance Value
Troubleshooting Tips
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
F-1
F-2
F-4
F-6
F-7
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
G-1
G-4
G-5
G-6
APPENDIX G – Utilities and Features
Using ESTeem Discovery Program
Using EtherStation Status Program
Setting Local Time 195Ed
Configuring Time Server
Revised: 11 Aug 08
Page 4
EST P/N AA107D
CHAPTER 1
INTRODUCTION
BEFORE YOU BEGIN
Thank you and congratulations on your purchase of the ESTeem
Model 195Ed Wireless Ethernet Radio Modem! This manual was
written to help both the first time and advanced user of the 195Ed
configure the radio modem for your application. If this your first
time configuring the 195Ed and you would like to get going as soon
as possible, we recommend using the 195Ed Quick Start Guide
provided with the modem. A copy of the guide is listed in the
appendix of this manual for your reference.
The ESTeem 195Ed is a very versatile wireless Ethernet networking device. To keep the manual usably short, many of the
application descriptions and programming details assume the user has a good working knowledge of the following network
concepts:
•
•
•
•
•
•
•
General Ethernet networking and the configuration of LAN topologies
Common Ethernet terminology and acronyms
TCP/IP network protocol structure and how to configure TCP/IP networks and subnets
How to identify and set the TCP/IP address on your computer
Have administrator privileges to the computer and network you are configuring
If using routing protocols, you must be able to identify and configure the network routers, gateways and firewalls
You must be familiar with using web browser software such as Internet Explorer, Netscape or Mozilla
If you are unfamiliar with any of the above networking concepts, you may need to contact your network administrator for
assistance.
MODEL 195Ed OVERVIEW
The ESTeem Model 195Ed is a wireless LAN
transceiver that can be used to build a Wireless
Local Area Network (WLAN) for line-of-sight
distances to 13 miles for fixed base and 5 miles
for mobile applications. The 195Ed can provide
RF data rates up to 54 Mbps and can have a serial
port for legacy RS-232 devices. The Model
195Ed is a very sophisticated networking device
that can be configured for multiple modes of
operation depending upon the needs of the
wireless and wired LAN system. The following
configuration modes are provided as an overview
of the basic network types, as all possible
network configurations can not be listed. For
further help in selecting the correct network type,
please contact Customer Support at 509-7359092.
Figure 1- Access Point Bridge Diagram
Revised: 27 Jun 08
1-1
EST P/N AA107D
CHAPTER 1
INTRODUCTION
MODEL 195Ed CONFIGURATION MODES
The Model 195Ed can be configured for multiple
modes of operation without any changes to the
hardware:
Access Point Modes
1.
Access Point Bridge Mode. When the
Model 195Ed is configured as an Access
Point it will provide a wireless bridge from a
hardwired Local Area Network (LAN) to
other Model 195Ed modems in client modes.
Multiple Access Point Bridge modems can be
physically connected to the same network
(LAN) or through a radio link using the
Access Point Repeater mode to provide
overlapping, seamless Ethernet
communication for mobile devices. The
ESTeem Model 195Ed in Access Point
Bridge mode will pass all network traffic
between connected devices including global network broadcasts. See Figure 1.
Figure 2 – Repeater Mode Diagram
2.
Access Point Router Mode. In this mode the ESTeem Model 195Ed will function as a router between the wired Ethernet
network, connect to the 195Ed’s Ethernet port, and the wireless network of other 195Ed’s in repeater peer mode. As in all
standard router configurations, the wireless and wired Ethernet networks will need to be on separate subnets. To communicate
from the wired Ethernet network to devices on the wireless network, a separate router (or the Model 195Ed configured as a
router) is required. The 195Ed in Access Point Router mode will pass network traffic for connected devices but will block
global network broadcasts from the wired network. This mode of operation should be used instead of the Access Point Bridge
mode when a separation between networks is required or the ESTeem is connected to larger LAN Networks that will
continuously send global network broadcasts (Figure 2).
3.
Access Point Masquerade Mode.
The Access Point Masquerade mode is
a special use of the Access Point mode
where the Model 195Ed will connect
multiple clients into a single static IP
address on a wired network. Data
requests from the wireless network
will be processed through the Access
Point Masquerade 195Ed, but any
request from the wired Ethernet
network to devices on the wireless
network will be rejected similar to the
operation of a “firewall”. The 195Ed
will hide all the IP addresses
connected on the wireless link. You
should use this mode of operation if
Model 195Ed is connected directly to
the Internet with a static IP address
Figure 3- Access Point Masquerade Diagram
Revised: 27 Jun 08
1-2
EST P/N AA107D
CHAPTER 1
INTRODUCTION
(DSL, T1, etc.) and you want the wireless clients to access the information through the Model 195Ed (Figure 3). This mode
should also be used for attaching the Model 195Ed to a network where few IP addresses are available or a firewall for the
wireless clients is required.
4.
Access Point Repeater. The Access Point Repeater can be used with any of the above Access Point modes. With this
repeater feature enabled, the Model 195Ed Access Points do not have to be hardwired together on the same physical LAN to
provide seamless Ethernet communication for roaming clients. In addition to greatly extending the Access Point canopy range,
the Model 195Ed will also bridge any Ethernet device or Ethernet network connected to the unit over this same wireless
Ethernet network. This mode gives the user the features of a point to multi-point bridge network but also allows Model 195Ed
in the Client mode to simultaneously roam under the network canopy.
5.
Self-Healing Mesh Network. If multiple Access Point Repeater routes are configured to the same destination ESTeem, the
195Ed will create a “self-healing” mesh network by automatically re-routing data through alternate paths to reach its
destination if the primary path is inoperable. The routing and priority of alternate paths is completely user configurable.
See Figure 4.
Access
Point/Repeater
Access
Point/Repeater
Access
Point/Repeater
Access
Point/Repeater
Access
Point/Repeater
Remote Site
Remote Site
Client Mode
Vehicles
Access
Point/Repeater
Access
Point/Repeater
Access
Point/Repeater
Remote Site
Remote Office
Remote Site
Access
Point/Repeater
Remote Site
Remote Site
Remote Site
Access
Point/Repeater
Access
Point/Repeater
Access
Point/Repeater
Remote Site
Remote Site
Remote Site
Main Office
Figure 4 – Mesh Network Diagram
Station (Client) Modes
6.
EtherStation Mode. When the 195Ed is configured in the EtherStation Mode and attached to a single Ethernet Device, the
Model 195Ed will emulate a wireless card in functionality for communication as a mobile client. The 195Ed will seamless
roam under the radio canopy of Access Point and can provide greatly increased range for mobile Ethernet devices such as
vehicles, forklifts, cranes, etc (Figures 1-3).
7.
Station Router Mode. The Station Router mode will also function as a client, similar to EtherStation, but will allow multiple
Ethernet devices to be connected to a single 195Ed (Figure 3). The 195Ed will function as a router between the wireless client
mode and the wired Ethernet devices connected to the Ethernet port. Similar in configuration to the Access Point Router
mode, the wireless and wired Ethernet networks will need to be on separate subnets. To communicate from wireless network
to devices on the wired Station Router network, a separate router (connected to the Ethernet side of the Access Point) is
Revised: 27 Jun 08
1-3
EST P/N AA107D
CHAPTER 1
INTRODUCTION
required. This mode would be used where multiple Ethernet devices will be connected to a single Model 195Ed in a mobile
client application and the connected Ethernet devices will need to be accessible from the Access Point’s LAN network.
8.
Station Masquerade Mode. The Station Masquerade Mode is another mode where multiple devices will be connected to a
single ESTeem in a mobile or Client application, but unlike the Station Router mode, the Station Masquerate will consolidate
all connected Ethernet devices to a single IP address on the network. The devices connected to the Station Masquerade 195Ed
will be able to access information from both the wireless and wired LAN, but will be inaccessible the other way similar in
application to a firewall. This mode would be used where multiple Ethernet devices will be connected to a single Model
195Ed in a mobile application and the IP addresses for each device will be hidden from the LAN connected to the Access
Point. See Figure 3.
9.
Serial Applications. The ESTeem 195Ed can optionally be installed with an RS-232 data port for serial data applications run
over the broadband link (Figure 5). The serial over broadband network can be used in a point-to-point or point-to-multi-point
application for networking serial (RS-232c) devices, providing serial connections to legacy hardware in a new Ethernet
network or providing for high-bandwidth devices (such as Video or Voice over IP) in an existing serial network. Installing the
serial port option also provides a second 10/100 Base-T Ethernet port that can be used to connect a second Ethernet device
without requiring a HUB/Switch or can be configured as an external Router port.
Lin
at
-o
f-S
ig
ht
ig
RS-232 Data
Access Point
Bridge with
Repeater
Mode
ht
Pa
th
f -S
-o
ne
Li
Access Point
Bridge with
Repeater Mode
Line-of-Sight Path
Remote Site
Remote PLC
Access Point
Bridge with
Repeater
Mode
RS-232 Data
Lin
e-o
f-Sig
ht P
ath
Repeater
Path
ight
-of-S
Line
Remote Site & Repeater
RS-232 Data
Access Point
Bridge with
Repeater
Mode
NOTE:
Repeater may be standalone or attached to a
network or device.
Note:
Access Point
Bridge with
Repeater Mode
Antenna’s shown are for
illustration purposes. There
are many antenna options
available depending on your
application.
Access Point
Bridge with
Repeater
Mode
RS-232 Data
RS-232 Data
Remote Site
Master PLC
Figure 5 – Multi-point Serial Diagram
To begin setup of your wireless Ethernet network you must first configure the Model 195Ed for the mode desired. Chapter 2 will
show several examples of the different modes of operation to help select the correct mode for your application.
Revised: 27 Jun 08
1-4
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
MODEL 195Ed ACCESS POINT BRIDGE DIAGRAMS
Figure 1: Single Access Point Bridge Diagram
Figure 2: Multiple Access Point Bridge (Overlapping Coverage) Diagram
Revised: 27 Jun 08
2-1
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
MODEL 195Ed ACCESS POINT ROUTER DIAGRAM
Figure 3: Access Point Router Diagram
MODEL 195Ed ACCESS POINT MASQUERADE DIAGRAM
Figure 4: Access Point Masquerade Diagram
Revised: 27 Jun 08
2-2
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
MODEL 195Ed ACCESS POINT REPEATER AND CLIENT CONFIGURATION DIAGRAMS
Figure 5: Access Point Bridge Repeater with Clients Diagram
Figure 6: Access Point Router Repeater with Clients Diagram
Revised: 27 Jun 08
2-3
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
MODEL 195Ed ACCESS POINT REPEATER AND CLIENT CONFIGURATION DIAGRAMS (Cont.)
Figure 7: Access Point Masquerade Repeater with Clients Diagram
MODEL 195Ed BUILDING TO BUILDING CONFIGURATION DIAGRAMS
Figure 8: Building to Building Configuration Diagram
Revised: 27 Jun 08
2-4
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
MODEL 195Ed BUILDING TO BUILDING CONFIGURATION DIAGRAMS (Cont.)
Figure 9: Building to Building with Repeater Diagram
Figure 10: Building to Building Router Diagram
Revised: 27 Jun 08
2-5
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
MODEL 195Ed COMPLETE BRIDGE SYSTEM CONFIGURATION DIAGRAMS
Figure 11: Complete Bridge Network Solutions Diagram
Revised: 27 Jun 08
2-6
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
MODEL 195Ed COMPLETE ROUTER SYSTEM CONFIGURATION DIAGRAMS
Figure 12: Complete Router Network Solutions Diagram
Revised: 27 Jun 08
2-7
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
Figure 13: Point to Point Serial Diagram
Figure 14: Point to Point With Repeater Serial Diagram
Revised: 27 Jun 08
2-8
EST P/N AA107D
CHAPTER 2
CONFIGURATION DIAGRAMS
Figure 15: Multi-point Serial Diagram
Figure 16: Ethernet and Serial Diagram
Revised: 27 Jun 08
2-9
EST P/N AA107D
CHAPTER 3
STARTING OUT
OVERVIEW
Most configuration of the ESTeem Model 195Ed is completed using the internal Web interface (discussed in detail in Chapter 4),
but to access the modem through a web browser requires first setting the TCP/IP address. The TCP/IP address (IP address) is set at
the factory for a static Class B (172.16.xxx.xxx - Mask 255.255.0.0) and listed on the ESTeem documentation. If this IP address
does not match your network configuration, you will need to use either the ESTeem 195E Discovery program or the RS-232
interface to set the IP address in the 195Ed.
QUICK START GUIDE
A printed copy of the Model 195Ed Quick Start Guide was provided in the documentation package that arrived with your new
ESTeem 195Ed. This guide is an abbreviated step-by-step procedure on configuration of the 195Ed for most Ethernet bridging and
Access Point applications. A copy of the Quick Start Guide is provided in Appendix G of this User’s Manual for convenience.
MODEL 195Ed HARDWARE LAYOUT
Unpack the ESTeem Model 195Ed shipping boxes and locate the items contained below for initial configuration. Take a few
minutes to inventory your equipment before you proceed. Report any missing or damaged items to Customer Support (509-7359092) as soon as possible.
Each node in your ESTeem Model 195Ed’s network may have different hardware components based upon the final installation
location (i.e Outdoor, Indoor, Point-to-point or Muti-Point). Antenna types, cable lengths, power supplies may be different, but the
following items will be required for basic setup:
Model 195Ed
AA109 Resource Disk
Antenna
(AA01S Displayed)
(2) Ethernet Cables
Power Supply
(AA175 Displayed)
Serial Interface Cable
(AA6021.1)
Note: Your accessory model numbers may vary from the above, but you will need to locate each of above items to continue
configuration.
Revised: 27 Jun 08
3-1
EST P/N AA107D
CHAPTER 3
STARTING OUT
(Optional)
Second
RS-232
Ethernet
Reset Switch Data Port
Port
Status
LED
Receive
LED
Transmit
LED
RS-232
Configuration
RJ-45 10/100BaseT
Ethernet Port
Aux Power
LED
12 VDC Input
(Auxiliary
Connector )
Figure 1: 195Ed Front Panel Overview
Power over
Ethernet LED
Notes:
• There is no Power On/Off switch on the Model 195Ed.
• Attach the programming Cable to the RS-232 Programming Port and the Patch Cable between the Power Supply and
Ethernet port.
• One word of caution, always attach an antenna to Port A (Figure 2) on the Model 195Ed before power up.
Antenna Port A
(Single Receive Antenna)
Antenna Port B
(Dual Receive Antennas)
Antenna Connectors
(TNC Female-RP)
Figure 2: 195Ed Antenna Overview
Revised: 27 Jun 08
3-2
EST P/N AA107D
CHAPTER 3
STARTING OUT
MODEL 195Ed HARDWARE CONFIGURATION
The following steps should be completed before any modifications are made to the IP address in the ESTeem Model 195Ed:
1.
Connect the antenna to the antenna connector on the ESTeem Model 195Ed (Figure 3). For a single antenna use Antenna Port
A and connect both if using dual antennas.
Single Antenna
Configuration
Dual Antenna
Configuration
Leave
Open
Figure 3: Antenna Configuration Diagram
2.
Assemble the 195Ed hardware as shown in Figure 4.
RJ-45 10/100BaseT
Ethernet Port
AA175 PoE
Power Supply
LAN In
PWR
Data Out
10/100BaseT
Ethernet Cable
(Patch or Cross Over)
Notes:
• Configure the Model
195Ed prior to
mounting.
•
Some of the following
steps, such as
connecting the serial
cable, are easier to
perform if the ESTeem
is accessible.
•
Please attach an
antenna to the Model
195Ed before power up.
•
There is no Power
On/Off switch on the
Model 195Ed.
10/100BaseT
Ethernet Cable
(Patch or Cross Over)
AA109
Resource
Disk
PC with Web
Browser Software
Figure 4: Hardware Configuration Diagram
Revised: 27 Jun 08
3-3
EST P/N AA107D
CHAPTER 3
STARTING OUT
3.
Complete the following System Configuration Table. The Model 195Ed will link to other Model 195Ed’s on the network
via the WLAN Media Access Control (MAC) address found on the bottom of the case. This MAC address is six
hexadecimal digits separated by colons and is configured at the factory. Every MAC address in the world is unique and
can not be changed. Complete the following chart to aid in your when defining modes of operation and repeater routes.
Modem_ID(Name)
/Operating Mode
Serial Number
IP Address
Ethernet MAC
WLAN MAC
Example Modem 1
AP_Bridge
E-14001
172.16.8.101
00:04:3f:00:01:01
00:04:3f:00:01:02
Revised: 27 Jun 08
3-4
EST P/N AA107D
CHAPTER 3
STARTING OUT
ESTEEM DISCOVERY UTILITY
The ESTeem Discovery Utility will allow you to
configure the IP address on the Model 195Ed to match
your network. Install the Discovery Utility on your
computer by inserting the Resource Disk in your CD
drive.
Note: The ESTeem Resource Disk is stand-alone copy of
the ESTeem Web site (Figure 5). Navigation of the
Resource Disk is as simple as using your web browser.
All technical documentation, User’s Manuals and the
ESTeem Utility Program is available on the disk.
1.
Place the ESTeem Utility CD in your CD-ROM
drive. The CD will auto load the ESTeem main
page
Figure 5: ESTeem Resource Main Page
Note: If the page does not auto load, open your web browser and set your address line to D:\index.html (Where D: is the
drive letter for your CD-ROM drive).
2.
From the Main Page select ESTeem Utilities and click on ESTeem Discovery Utility (Figure 6).
Figure 6: Discovery Utility Download
Note: This program is saved in a compressed file format. Microsoft Windows XP® will open the file directly, but other
operating systems will require a common compression program such as WinZip available for download at
http://www.winzip.com
3.
Double click on the 195EdiscoverySetup.exe file listed in the window to install the program.
Revised: 27 Jun 08
3-5
EST P/N AA107D

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 25
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:4cfa6c9d-c3a5-4093-b276-f603a264d386
Modify Date                     : 2008:08:15 15:33:18-07:00
Create Date                     : 2008:08:15 15:32:58-07:00
Metadata Date                   : 2008:08:15 15:33:18-07:00
Document ID                     : uuid:b45b4d7f-50f0-48d8-b1f6-4e91c9e18442
Format                          : application/pdf
Title                           : 195Ed Chapter 0 - Front Cover 195Ed
Creator                         : PDFCreator Version 0.9.5
Author                          : Marske
Subject                         : 
Producer                        : GPL Ghostscript 8.61

EXIF Metadata provided by EXIF.tools