Electronics Tomorrow 650171115 TraceableLIVE WiFi Datalogging User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3103198
Application ID	o6vVOfpIn0d/OiovkbqqrA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	87.49kB (1093604 bits)
Date Submitted	2016-08-18 00:00:00
Date Available	2016-08-18 00:00:00
Creation Date	2016-08-10 10:25:00
Producing Software	GPL Ghostscript 9.05
Document Lastmod	2016-08-10 10:25:00
Document Title	Document1
Document Creator	PDFCreator Version 1.4.1
Document Author:	kenleung

NOTE: The router has to support WPS, and WPS
Iunction has to be enabled The deuice supports only
PUSH BUTTON Method Fin Code Method is NOT
supported
NOTE: Using wps proinsioning wtlt not update the
deytce‘s date/time,
HOW TO CONFIGURE WiFi NETWORK:
SMARTCONFIG PROVISIONING
' IleFI Is dtsabied press WIFI button to enable
WiFl function if It is first time enebied, WiFi
symbol Ilashes
- Press and hoid WiFi button for 35 tlil the device
dispiays “AP“.
4 Press UP or DOWN button to scroil to
SmartConfig. “SnArT‘ is displayed on LCD,
~ Press and reiease WiFi button, the devrce dispiays
‘AP UAITX
' Wait till LCD disptays “SnArT rEAdy" (SMART
ready),
- On Ti’s WIFI Surler App, enter Network iD and
password, and press Start button,
- Ir network is configured successfuliy, the device
reboots, and ready to use
NOTE: this method requires userto lnstali Tl WIFI
Starter app tor iOS or Android on moblie devices
NOTE: Using SmartConfig proinsioning Wlil not
update the deyice‘s date/time
DATA MEMORY
t. Deince is capable or storing 7 days of data it is
minute logging Interval ls set
2 If dam transmission tarts, data Wlii be stored In
data memory Stored data wiii be transmltted
automatically on next successtut transmission
3. IleFI network has been configured, and WIFI Is
dlsabied, data wltl be stored In data memory at
userrdehned tagging Interval,
4. IleFI network has not been configured data WlIi
not be stored In data memory.
5 Stored data in data memory cannot be cleared by
user, It can onty be cleared by a successtui data
transmisslbri,
REGULATORY INFORMATION
Tnts equipment has oeen tested and round to comply
with the limits fora Class B digial deinoe, pursuant
to Part t5 ot the FCC Rules These limits are
designed to proinde reasonable protection against
harmtul Interference in a residential installation This
equipment generates, uses and can radiate radio
Ireouenoy energy and, it not installed and used in
accordance thh the instructions, may muse hanntul
interrerenoe to radio communications
However, there is no guarantee that intenerence mil
not occur in a parllwiar Installation If this equipment
does cause harmful Interference to radio or television
reception, which can be determined by turning the
equipment oh and on, the user is encouraged to
try to correct the Interference by one or more at the
Iollowmg measures
- Reorlent or relocate the teceiying antenna
‘ Increase the separation between the equipment
and receiver
. Connect the equipment into an outlet on a
circuit diltetent from that to which the receiver is
connected
- Consult the dealer or an experienoed radto/TV
technician tor help.
This device compiles with Part 15 of the FCC Ruies.
Operation ls subject to the toilewrng two conditions
(ti this device may not cause harmtiil Interference,
and (2) this device must accept any interference
received, Including intenerenoe that may cause
undesired operation
Hereby, Control Company declares that this digiuil
thermometer is in oomplierioe With the essential
requirements and other reievant provisions of
Directive 1999/5/33
This device compires with Industry Canada iicencer
exempt RSS standardts), Operation is suhieot to
the totiowrng two conditions: (1) this devrce may not
cause intenerence, and (2) this deuice must accept
any Interference, lnciuding Interference that may
cause undesired operation or the deiiice.
Le present appareil est contomie aux CNR
d'lndustne Canada applicables aux apparetls radio
exempts de licence L‘expioitatlon est autorisee
aux deux conditions sulvantes tft i‘apparell Ire
doit pas produire de brouillage, et (2) I'utilisateur de
I'apparell dolt accepter tout brouiiiage radtueiectnque
subl, méme st ie broulliage est susceptible d’en
oompromettre ie fonctlonnerrtent
WARRANTV, SERVICE. OR RECALIBRATION
Forwananty, service, or recalibration, contact
CONTROL COMPANY
4455 Rex Road
Friendswood, Texas 77546 USA
Ph 2814824714 ~ Fax 28148279448
Email saies@controi3.com - wwwoontrota com
Control Company IS tso 90m Quahty»Certlfled by DNV
and ISO 17025 aocredrted as a Calibration Laboratory
oy AZLA
Warning Changes or modtrications to this urrit not expressly
approved by the party responsible tor compliance could void
the user'e sutnonty to operate the equipment.
Tr-aceableLlVEm
WiFi
DATALDGGING
REFR IGERATDFI/
FREEZER
THERMDMETER
WITH REMOTE
NOTIFICATION
INSTRUCTIONS
<9 conooi Company eat in osou rosot 55.02 5503
Traceabte’ is a registered trademark orG) oonool Company
TraceableLlyE" is a trademark ot G) Control Company
ezot5© Control Company 9276500700 Rev. D tztsts
CONTROLS
M \MFI Enables Ordtssbtes Wm Capsbltflles
0 SET Use to set’ date/time, alarm settings
(it wiEi is disabled),
f UP: Adiusts setting up in SET menu.
J DOWN. Adiusts setting down in SET menu
0 CHANNEL SELECT, Selects which channel to
1 display or select dual channel new mode to
view dual channels,
HI PLAV/PAUSE In single channel uiew mode,
select second line display, current time, Current
mlnlmum, ciinent maximum, alarm setting
lower limit, alarm setting hgher limit
CIF C/F. Selecls temperature urIII
‘/ CLEAR Press In Clearcunentmlnlmax vatttes,
Natl: ‘WIFI enabled” ls Indicated by the flashlng WlFl
symbol It also indicates that wit=i netwotk needs to
be contrgured Itvai network has been conhgured,
and WIFi symbol ttashes and buzzer beeps every l5
seconds, it indicates an alarm ot unsuccesle data
transmisston to cloud server. Press M) button to
clear alarm. or alarm will clear automatically upon
next successtul transmission,
SPECIFICATIONS:
. Temperature Range, —50 to 60°C
- Temperature sample rate‘ l2 seconds
. Detault wiEi Transmission Freouency. 15 minutes
~ Maximum number ot Stored Records: 672 (7 days
it set to 15 minutes interval)
~ Max. Stored Alarms 100
« Battery 4 AAAAlkatllte battery
DISPLAY MODES
SINGLE CHANNEL MODE
. LCD displays intormation on channel l or 2 Scroll
through- current hme e> current Minimum e> current
maximum -> alann setting minimum -> alarm eating
maxlmum ,> current tlme
~ SCrOHtrlg Interva|13 seconds,
- Press ChannellSelect button to select the desired
channel, or dual channels.
- To pause scrolling, press Play/Pause To resume
scrolling, press PlaylPause agalrl. To test torward,
press Play/Pause to move to next item
~ Once to desired intormatlon is displayed, press
Play/Pause button one more time to pause scrolling,
otherwise second line resumes scrolling,
DUAL CHANNEL MODE
~To uiew both Channel 1 and 2, Press CHANNEL
SELECT button to select dual channels,
. CHM symbol will appear on display
SELECTING CHANNEL (PROBE)
0 Whlle the dEVIBE Is nO| III SETUP Mode, press
ChannellSelect button to select channel.
- IIChannet 1 (Probe 1) is selected, CHt symbol will
appear on display.
~ ItChaanet 2 (Probe 2) Is seteaed, CH2 symbol wllt
appear on display.
- II in dual channel view mode, the trst line displays
Channel 1, and second line Channel 2 Cth
symbol will appear on display
CLEAR CURRENT MINIMUM/MAXIMUM MEMORY
1. Press the Channel (PROBE) to select the tempers
ture probe channel to be cleared
2. CM will clear Channel I (Probe t): CH2 will clear
Channel 2 (Probe 2t and in dual channel mode CH12
wlll clear Channels 1 and 2 (Probe t and 2t.
3. Press the CLEAR button to clear the current minimum
and maximum temperature readings
DEVICE SETUP
I, It not wiPi enabled. press and hold SET button
for 3a to enter setup menu
2, Pirstttashing number is to set year: press UP or
DOWN button to set to current year.
3, Once year is set, press PLAVIPAUSE button to
setup Month e> Day e> Hour e> Minute e> T‘lme
Format (12HI24H) -> Channel 1 Minimum Alarm
.> Channel t Maximum Alarm 7) Channel 2
Mlnimum Alarm -> Channel 2 Maximum Alarm ->
exit Setup Menu
4, It WiFI is enabled
ttear 7) Month .> Day e> Hour e> Minute e> 'fime
Format (12HI24H) -> will setup automatically
5, While adrusting setting, press and hold UP or
DOWN button to adiust quickly When Settlrlg
up alarm, 0 P is the detault increment Press
and hold UP or DOWN button. to increase
to 1° Increment Once UP Or DOWN button
is released, the increment will detault to 0.1“
Inoremenl.
6 To exit Setup menu‘
- Press and hold SET button tor 35’
- Or press and release PLAY/PAUSE button to
move torward setup menu items to exit,
- Or do nothing, the device will exit setup
menu in about 15s,
NOTE: It MP is enabled on device, VNPi symbol
hashing or not, the setting menu will skip setting
alarms, and the device alarm can only be set through
cloud server.
NOTE: Alarm setting on device will not transmit to
cloud server Alarm setting synchronization is only
trom TraceableLlVEW cloud server to device
ALARM
l lt alarm is tnggered, LCD display automatically
switches to the channel, and temperature reading,
and ALM, MIN or MAX symbol ttashes Alarm also
beeps. ll temperature is below low alarm setting,
MIN symbol hashes; it temperature is above high
alarm setting, MAX symbol flashes
2 ll alarm triggered simultaneously on both channel,
LCD displays Channel 1
3 Use CHANNELSELECT button to select channel
to display It the displayed channel is not alarm
triggered, LCD will not tash, while buzzer is still
activated. Once CHANNELSELECT pressed, the
device will not automatically swltch to current alarm
triggered channel until new alarm is triggeted
A it an alarm is triggered, second Ilne on LCD will
lreeze scrolling, and it the device is not rn Dual
Channel view Mode, it displays alarm setting
minimum/maximum depending on alarm type
5 To clear an alarm, press and release CLEAR
button, LCD wlll stop hashing. buzzer will stop
beeping The second line on LCD will resume
scrolling.
6. Once an alarm is triggered, the device will post to
server immediately. It 3 transmissions tail, alarm will
be stored in memory
CONFIGURE WiFi NETWORK: AP PROVISIONING
~ It WIFi is disabled, press wit=i button to enable
WlFl tunctton It it is hrst u‘me enabled, wit=i symbol
ttashes.
Press and hold wiFi button tor 3 secs until device
displays 'AP', To abort, press and hold thi button,
Press Wit=i button again the device wlll display “AF
UAIT' (AP WAIT).
Alter 5 to to seconds, “AP lEAdy' (AP ready) will
appear on display. To abon, press and hold CLEAR
button until the device restans.
NOTE: litht=i oontiguranon will be cleared it aborted
at this stage
Use a mobile phone or Wireless capable laptop,
connect to Network ID ‘CCG50LLXXXX', where xxx
is last 4digit ot the devlce's serial number (SIN)
. Open a web browser, type 192168.11, the setup
webpage will appear
on
. From Add Prcltles section, trcm the dtOp—dowlt
list, select the intended Network ID and then input
security type, password, Please double check these
intormation are correct Security type is detault to
WPAz.
~ Or it the intended Network ID is not shown in the
list, scroll to the last item ol the list ‘Olhel, please
spechy-l and select Anew input box is Shown’
~ Type Network ID in the box, and then select
security type and type password,
Click Add button
It network is Configured successtully, the device
reboots, and is ready to use
It network ccntlguration tells, the device displays
“Ell“, and then press CLEAR button, the deuice
reboots Make sure Network ID, password, and
security type are selected nght, and try to Conflgute
the network again,
NOTE: The device date/time is automatically
synchronoed to the mobile phone or laptop once the
setup webpage is shovm,
NOTE: Make sure Network ID and password are
Correct: othenmse the device wI[| wait to Connect to the
router unhl timeout, and then ‘EIT' IS shown all LCD.
CONFIGURE WiFi NETWORK: WPS
PROVISIONINO
- Itth is disabled, press WIFi button to enable
WiFi tunctron. It it is trst time enabled, wiPt symbol
ttashes
. Press and hold WIFi button tor 3s till the device
dlsplays“AP',
~ Press UP or DOWN button to scroll to WPs “UPS"
is displayed on LCD
~ Press and release WiFI button, the deuice displays
“AP UAIT'
- Wait until LCD displays “UPS lEAdy" (WPS ready),
. Press WPS button on the router that the device
is intended to connect to Please reter to Touts-T‘s
manual tor WPS tunctton
~ It network is configured successtully, the device
reboots, and ready to use

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:28f58e77-60fd-11e6-0000-2dbfc8f92f81
Producer                        : GPL Ghostscript 9.05
Keywords                        : ()
Modify Date                     : 2016:08:10 10:25:00+08:00
Create Date                     : 2016:08:10 10:25:00+08:00
Creator Tool                    : PDFCreator Version 1.4.1
Document ID                     : uuid:28f58e77-60fd-11e6-0000-2dbfc8f92f81
Format                          : application/pdf
Title                           : Document1
Creator                         : kenleung
Description                     : ()
Author                          : kenleung
Subject                         : 

EXIF Metadata provided by EXIF.tools