Electronics GBTSP01 Bluetooth speakers User Manual
INTERNATIONAL ELECTRONICS Bluetooth speakers Users Manual
User manual
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Manual Bluetooth speakers Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. G B T S P 01 Dear Customer, Main speakers function Congratulations on becoming a proud owner of YardBright Bluetooth wireless speakers. We suggest that read the user manual before use the product, Make you very skilled operating this product. If you have any questions about this product, please try to contact us, we will solve for you. Please save the user manual for reference. SPECIFICATIONS 1.Output Power:30W+30W 2.Frequency Respons:20Hz-20KHz 3.S/N ratio:80dB 4.Distortion:10W 1KHz<0.1% 5.Bluetooth frequency : 2.4G Hz 6.Wireless transmission frequency : 915M Hz Matters need attention This product built-in the lead-acid battery, It can be used outdoors, Please before use in the outdoor for rechargeable batteries, So that it can work longer time in the outdoor. This product has a intelligent switch power supply circuit, If you connect the power adapter to the DC socket, This product will use the power adapter power supply work and Lead-acid battery charging. If you without the power adapter to the DC socket, This product will use the Lead-acid battery work. When the power adapter for lead-acid battery charging, Led (red) lights up for normally on, After the battery enough, \LED lights go out. If when using battery power supply work, hear please charge, please connect the power adapter and charging as soon as possible Lead-acid battery, please pay attention to maintenance, if you don't often use, please ensure that every month for at least 2 times or more out of power and full of Power. 1 Charge 15V 1A 1) Full charge time is about 3 hours(Suggest charge when not working) 2) Full power work ,Work about 2.5 hours, prompt please charge,Work about 3 hours, Will automatically cut off power,Please must be charge. 2 LED light 1) When charging, the LED (red) lights up for normally on, After the battery enough, LED lights go out. 2) When switched on, the LED (red) lights the normally on after flashing 3 times. Audio wireless transmitting mode Start-up success 3) When switched on, Led (blue) lights rapid flashing, Bluetooth not connected. When switched on, Led (blue) lights up for normally on, Bluetooth connect success. When switched on, Led (blue) lights Slow flashing, Bluetooth wireless audio signal transmission. 3 power switch/volume control 1) The volume knob in the state of minimum volume is power off, If you increase the volume gradually, will automatically power on and increase the volume Passive speakers function 1 Charge 15V 1A 1) Full charge time is about 3 hours(Suggest charge when not working) 2) Full power work ,Work about 2.5 hours, prompt please charge,Work about 3 hours, Will automatically cut off power,Please must be charge. 2 LED light 1) When charging, the LED (red) lights up for normally on, After the battery enough, LED lights go out. 2) When switched on, the LED (red) lights rapid flashing, When receiving a wireless audio signal into normally on state. 3 power switch/volume control 1) The volume knob in the state of minimum volume is power off, If you increase the volume gradually, will automatically power on and increase the volume
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Administrator Title : GBTSP01石头箱说明书.cdr Create Date : 2016:05:05 18:02:54+08:00 Creator Tool : CorelDRAW X5 Modify Date : 2016:05:24 11:01:04+08:00 Metadata Date : 2016:05:24 11:01:04+08:00 Producer : Corel PDF Engine Version 15.0.0.486 Document ID : uuid:34d70098-6339-451f-9c39-a55965d2ef67 Instance ID : uuid:81fcbb35-b4e9-4d0a-9bc6-f14e7bc2c572 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Author : AdministratorEXIF Metadata provided by EXIF.tools