Eleven Engineering orporated PL5557 SKAA USB TX User Manual Instructions v1 6i
Eleven Engineering Inc. SKAA USB TX Instructions v1 6i
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1732881 |
| Application ID | zq5k2kGQdoQQnhH2z3402g== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 10.11kB (126321 bits) |
| Date Submitted | 2012-06-29 00:00:00 |
| Date Available | 2012-06-29 00:00:00 |
| Creation Date | 2017-10-31 02:36:08 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-31 02:36:08 |
| Document Title | User Manual Instructions v1_6i |
| Document Creator | Word |
| Document Author: | Jason Gosior |
SKAA User’s Manual For all SKAA part numbers including PL5553, PL5554, PL5556, PL5557, and PL5561 TM SKAA transmitters each support up to four SKAA receiver units at the same time. The SKAA logo between transmitters and receivers. guarantees compatibility Green List ‐ All SKAA receivers have a Green List which is just a list of your favorite transmitters. The first time you use a receiver, the Green List is empty, so you need to Double Click the SKAA button to hunt for a new transmitter. If your receiver consists of two or more wireless units, (for example, a left speaker and a right speaker) we call that a Cluster. The unit with the SKAA button is the Master of the Cluster and it is where the Green List is kept. Each unit uses three LED colors to communicate SKAA status: green, amber and red. SKAA TM is a trademark of Eleven Engineering Incorporated. Please visit www.SKAA.com. Common SKAA Commands Command Hunt through Green List (look for favorite transmitters) Button Single Click Explore; hunt for new transmitters Double Click Add / delete transmitter from Green List Hold for 3 seconds Automatically add transmitter to Green List by listening continuously for 30 minutes. ‐ LED Hunting (Flash) Green List # Bonded Hunting Bonded Added (Flash) Deleted Added More SKAA Commands Command When hunting through green list, stop at the current green list entry and continue to look solely for that transmitter Mute If muted, unmute Erase the Green List; start over To make a Cluster of receivers: 1. power on Master while holding down SKAA button (hold button until red LED starts flashing) 2. power on remaining receiver units 3. once LED on Master becomes solid (stops flashing), turn off the Master and all other receiver units FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Button Single Click Triple Click Single Click Click 6 times Hold during power on. Note ‐ only receiver units from the same manufacturer and product family may become a Cluster LED Hunting (Flash) Green List # Bonded Flashing Returns to previous Flashes (Flashing) Master has entered cluster up mode Cluster has been successfully made IC Statement This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Apple Keywords : Author : Jason Gosior Create Date : 2012:06:27 08:42:28Z Modify Date : 2012:06:27 16:55:23+08:00 Subject : XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : Jason Gosior Description : Title : User Manual Instructions v1_6i Creator Tool : Word Metadata Date : 2012:06:27 16:55:23+08:00 Keywords : Producer : Mac OS X 10.7.4 Quartz PDFContext Document ID : uuid:748777fd-879c-4a1f-af7f-fe64cc6f4125 Instance ID : uuid:8901d140-06f9-4dae-8a67-9436052b190c Page Count : 1EXIF Metadata provided by EXIF.tools