Eleven Engineering orporated PL5561 SKAA USB TX User Manual Logo Usage Guidelines

Download:
Mirror Download [FCC.gov]
Document ID	1688522
Application ID	UdHXqS5797RfiQFJ+Weh1w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.96kB (149486 bits)
Date Submitted	2012-05-02 00:00:00
Date Available	2012-05-02 00:00:00
Creation Date	2017-10-31 20:56:16
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-31 20:56:16
Document Title	Logo Usage Guidelines
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	Crated by: Tammy Chen

SKAA User’s Manual
For all SKAA part numbers including PL5553, PL5554, PL5556 and PL5561
SKAATM transmitters each support up to four SKAA receiver units at the same time. The SKAA logo
between transmitters and receivers.
guarantees compatibility
Green List ‐ All SKAA receivers have a Green List which is just a list of your favorite transmitters. The first time you use a receiver, the
Green List is empty, so you need to Double Click the SKAA button to hunt for a new transmitter. If your receiver consists of two or
more wireless units, (for example, a left speaker and a right speaker) we call that a Cluster. The unit with the SKAA button is the
Master of the Cluster and it is where the Green List is kept. Each unit uses three LED colors to communicate SKAA status: green,
amber and red.
TM
SKAA
is a trademark of Eleven Engineering Incorporated. Please visit www.SKAA.com.
Common SKAA Commands
Command
Hunt through Green List (look for favorite
transmitters)
Button
Single Click
Explore; hunt for new transmitters
Double Click
Add / delete transmitter from Green List
Hold for 3 seconds
Automatically add transmitter to Green List by
listening continuously for 30 minutes.
‐
LED
Hunting
(Flash) Green List #
Bonded
Hunting
Bonded
Æ
Added
(Flash) Deleted
Æ
Added
More SKAA Commands
Command
When hunting through green list, stop at the
current green list entry and continue to look solely
for that transmitter
Mute
If muted, unmute
Erase the Green List; start over
To make a Cluster of receivers:
1. power on Master while holding down SKAA
button (hold button until red LED starts
flashing)
2. power on remaining receiver units
3. once LED on Master becomes solid (stops
flashing), turn off the Master and all other
receiver units
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Button
Single Click
Triple Click
Single Click
Click 6 times
Hold during power on.
Note ‐ only receiver units
from the same manufacturer
and product family may
become a Cluster
LED
Hunting
(Flash) Green List #
Bonded
Flashing
Returns to previous
Flashes
(Flashing) Master has
entered cluster up
mode
Cluster has been
successfully made
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Crated by: Tammy Chen
Company                         : Eleven Engineering Inc
Create Date                     : 2011:06:07 15:22:34-06:00
Modify Date                     : 2012:04:30 14:16:24+08:00
Source Modified                 : D:20110607212216
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Metadata Date                   : 2012:04:30 14:16:24+08:00
Document ID                     : uuid:cb882c53-5d1e-4281-b014-c24753a4d88e
Instance ID                     : uuid:71969177-c2aa-4b71-bd94-a893510ffaca
Subject                         : 3
Format                          : application/pdf
Creator                         : Crated by: Tammy Chen
Title                           : Logo Usage Guidelines
Page Layout                     : OneColumn
Page Count                      : 1

EXIF Metadata provided by EXIF.tools