Elexa Consumer DMGW1 Dome Hub User Manual

Elexa Consumer Products Inc. Dome Hub

a href="https://usermanual.wiki/Elexa-Consumer" itemprop="url"> Elexa Consumer >

User Manual

1TheZ-Box SmartHomeControllerVersion2/Z-Wave Cert No:ZC10-XXXXXXXXQuick StartThis device is a control center (gateway) for Z-Wave home automation networks. It is used to control differentsingle devices as well as complete defined scenes and actions combining device functions within the network.It needs only a few steps to get your Z-box up and running.1. Power it up by plugging in the external power supply2. Connect the z-box to your local router using a standard Ethernet cable3. Use a web browser on your desktop PC or mobile internet device and go to login page .Input the IPaddress into the address bar, press ENTER to enter the login page.(IP address:192.168.10.1)4. Login using the initial local default login (login: admin; password: 123456)5. Got to setup (upper right corner)My Settings, remember your remote access ID and define your remotepassword. This password is used for accessing the controller from outside the home. It is shared among alllocal users in the home. If you want to protect your login from other users inside the home, change the localdefault password.6. Define your rooms usingRooms7. Setup the other users and give them access to the rooms.8. Installing your smart home devices one by one. Use the dialogDevicesfor thisHardwareThe Z-Box is a small but powerful hardware offering various interfaces:•Power Input: The device is powered by AC adapter DC9V 1.3A.•Ethernet: The device can be connected to any standard 10/100 MBit/s Ethernet router•3*USB(2insidethechamberand1external):The3USBportsallowtoconnectadditionalcommunicationor storage options such as an EnOcean dongle, Bluetooth dongle, hard disk or any other USB device suitablefor Z-box.Installation•Connect to RouterUsing the LAN cable connect the Z-box to your router.
2Note-If a connection through the router is not available, there is an refer to the Dome App for step-by-stepinstructions when installation is complete.•Connect to PowerUsing the cord provided, connect the Z-box to an electrical wall outlet.Installing Batteries (optional)The Z-box uses 4 Ni-MH AA Rechargeable batteries (not included) which allow the system to continueoperation for up to 6 hours (depend on battery capacity and application) when the power is out.We recommend use 2400mAZ-Box provide trickle charge to recharge battery which is the safest charging technique, it takes approx. 48hours to fully recharge 4 x 2400mA Ni-MH rechargeable batteries – please DON’T MIX differentcapacity/brand/age of batteries.To install the batteries, pry open the lid of the Z-box at the notch in the back just above the cable ports.LED Behavior
Download:
Mirror Download [FCC.gov]
Document ID3049497
Application IDs6kFBhU5jQJ7wTOBZSxQtw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize118.99kB (1487377 bits)
Date Submitted2016-07-04 00:00:00
Date Available2016-07-04 00:00:00
Creation Date2016-06-17 21:39:32
Producing SoftwareAcrobat Distiller 9.3.3 (Windows)
Document Lastmod2016-06-17 21:39:32
Document TitleF:\amy接手的案子\2016年5-6月\011605225I Elexa Consumer Dome Hub DMGW1 FCC ID(信科)\资料\资料OK\user manual.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: anbotek
FCC ID Filing: VII-DMGW1

Navigation menu