Elexa Consumer DMWV1 Water Valve Shut Off User Manual
Elexa Consumer Products Inc. Water Valve Shut Off
User manual
GR-105 Operating Instructions Introduction Thanks for choosing the auto valve for your Z-Wave home automation. The GR-105 is a ZWave auto valve, it works with any Z-Wave compliant gateway or controller. It can open/close the water valve Specifications Type:GR-105 Power:DC 12V/1A Z-wave Frequency:908.42 MHz (US) Operating Range:Up to 100 feet line of sight Twist pressure:1.6Mpa Resist twisting:30~60kg.cm Package content:DC 12V/1A、hardware fitting Installation: 1. Inclusion/ Exclusion Z-Wave network Put the Z-Wave interface controller into “inclusion or exclusion” mode, and press the red power button once, the distance between GR-105 and controller is suggested to be in one meter. 2. For pipeline valves, the original ball as far as possible the total households in the ease of design and installation manual position. The Valve control should be installed in the original total gas ball valve. The Case not close to the wall, the wall should be a palm distance (20mm) above the installation. 3. Due to power outages, testing, maintenance, security and other needs,It can be close the valve by manually:Robot with finger in ring-pull down the clutch, do not release your finger and hold, 90 degree turn the handle, manual open and close the valve, Until the handle on/off to the correct position. cautions: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2014:05:14 13:04:47+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2016:11:15 20:05:21+08:00 Metadata Date : 2016:11:15 20:05:21+08:00 Format : application/pdf Title : Microsoft Word - 机械手说明书auto_valve.doc Creator : Administrator Document ID : uuid:e1860b47-4865-41e8-b6b4-db9705da7ae0 Instance ID : uuid:99445809-703a-425b-9d86-27f5a1d35654 Page Count : 1 Author : AdministratorEXIF Metadata provided by EXIF.tools