Elexa Consumer ELAMMD AMBIENT LIGHT KIT User Manual ELAMMD USER
Elexa Consumer Products Inc. AMBIENT LIGHT KIT ELAMMD USER
Users Manual
Usermanual–ELAMMD
1． Functionalschematicdiagram
2.Instructions
1) Changecolormanually .
AccordingtotheFunctionalschematicdiagram,linktheoutputterminal,LEDlamppipeand
powerinput,pressthemiddlebutton(”MODEL”)toturnon,itwillflashinakindofcolor,
pressthisbuttonordinaltocontroltheAmbientlightforchangingcolors(changesevencolor
most).Pressthebuttoneighthtimetoturnoff(otherbuttonsto lose effectiveness).
2)Changecolor automatically .
Press the button “MODEL” to turn on, hold on two seconds, Enter the automatic mode. Now
the Ambientlightwillchangecolorautomatically every five seconds. Press the right button
“UP” to speed up the speed of changing color, when press the button fifth, the Ambientlight
willchangecolorautomatically every seconds. Press the left button “DOWN” decelerate the
speed of changing color, when press the button fifth, the Ambientlightwillchangecolor
automatically every seconds.
3)Pressthebutton“MODEL”again,turnbacktotheakindofcolormode,nowchangecolor
manuallyandpressthebutton“UP”toturnonsoundcontrol,thenthe Ambientlightwillflash
andchangecolorautomatically according to the music. Press the button “MODEL” again; it
will flash in a kind of color. When it is flashing, press the button “MODEL” continuously to
enter “changecolormanually” mode.
FCC ID: VII-ELAMMD
IMPORTANT REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any
interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipments.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and, the user
is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV Technician for help.