Elexa Consumer SMM-08 POWER TILT LCD/PLASMA MOUNT User Manual SMM 08 USER

Download:
Mirror Download [FCC.gov]
Document ID	1184504
Application ID	EIOGxsPV9H+fv7S5D2bh4g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.3kB (53690 bits)
Date Submitted	2009-10-16 00:00:00
Date Available	2009-10-16 00:00:00
Creation Date	2009-10-09 13:48:59
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-10-09 13:48:59
Document Title	Microsoft Word - SMM-08-USER
Document Creator	PScript5.dll Version 5.2
Document Author:	eason

User manual
1． Functional schematic diagram （TWO MOTORS）
1. Description of Power
Host is equipped with Switching power supply（DC12V、1.25A）.This machine is
the maximum current not more than 1.2A when the rated load weight.When current
more than 1.2A : Buzzer will alarm in the host, and one second later ,SCM detect
the fault and then disconnect motor power automatically to protect the Host.
2. Instructions
1) Turn on the power, the TV Mount will turn back to midpoint automatically,then
contraction, return and turn off.
2) Press the button “OPEN” on the remote, the TV Mount will extend and stop.
3) Press the button “LEFT,RIGHT,DOWN”
to adjust the angle that you want.
4) Hold the button “MEMORY” long time and adjust the angle you want, then press
the button “MEMORY” again, the red light turn off and this angle is saved.
5) Press the button “OPEN” again, the TV Mount will turn back to midpoint
automatically, then contraction, return and turn off; if you want to turn
on again, press the button “MEMORY” only, then the TV Mount will restore
the angle that you saved before turn off.
FCC ID: VII-SMM-08
IMPORTANT REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference that is received, including any
interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipments.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and, the user
is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV Technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:10:09 13:48:59+08:00
Create Date                     : 2009:10:09 13:48:59+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SMM-08-USER
Creator                         : eason
Document ID                     : uuid:82c66052-e88b-4d4d-916c-d6ef7865d6f6
Instance ID                     : uuid:a240865f-3215-410a-a437-b1567879d4f7
Page Count                      : 3
Author                          : eason

EXIF Metadata provided by EXIF.tools