Elpas Solutions 3-63290 Desk-top reader with USB interface User Manual

Elpas Solutions Ltd. Desk-top reader with USB interface 1

a href="https://usermanual.wiki/Elpas-Solutions" itemprop="url"> Elpas Solutions >

Users Manual

www.elpas.com Page 1 of 2 DE6329_V3_09/13 VisAccess RDR-PXT (USB) Reader for Proximity Key Enrollment Installation Guide 1. INTRODUCTION The RDR-PXT is a proximity reader designed for batch enrollment of proximity keys in the PC. It allows easy inclusion of non-contact ID key reading into AXSAlert software. The reader transmits the key data 4 times (every 100 ms) when key is presented to reader. Key data is accompanied by checksum error detection code for higher reliability. The RDR-PXT connects to the PC using a USB port. 2. TECHNICAL SPECIFICATIONS Technology: RF/ID (Passive RF transponder) Frequency: 125 kHz ID codes: 1012 unique combinations (1 trillion) Read range: 40-60 mm (2 - 3 in.) Reading time: 100 ms Size (H x W x H): 115 x 73 x 29 mm (4-1/5 x 2-7/8 x 1-1/8 in) Weight: 120 gr (4.2 oz) Cable length: 1.5 m (5 ft) Connector: USB Interface to host: USB Current drain: 30mA Temperature range: 0C - 50C (32F - 130F) - indoor use only 3. INSTALL THE SOFTWARE Insert the AXSalert CD in to the CD-ROM drive; wait a few seconds. The installation setup will start automatically. If the setup does not start automatically, click Start and select Run. In the field that appears, enter D:\Install.exe (where D is the letter of your CR-ROM drive). Follow the instructions that appear on the PC screen. After installation is completed, connect the RDR-PXT to a USB port on your computer. 34. START THE SOFTWARE Double click on the AXSalert icon on the desktop A prompt will appear to insert username and password. Type "admin" (password is not needed) in the user name field and click on "Login" button. 4. ENROLL NEW CARDS (USERS) Press on the "users" button: On the "Users" screen select the "+" sign. The "User Properties" screen will appear:  Present the Tag / Cards to the RDR-PXT, the "PIN Code" field will change to a four figure number, if it doesn’t, retry.  Type the "First name / Last name" of the cardholder  Select "OK"  The cardholder can now use his Tag / Card. NOTE: To enroll another Tag / Card, repeat the above step s.Attention: Do not connect the RDR-PXT before installing the software
Download:
Mirror Download [FCC.gov]
Document ID2091098
Application IDgiHdWG92TVnSZSr9F+ptDg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize15.21kB (190066 bits)
Date Submitted2013-10-17 00:00:00
Date Available2013-10-17 00:00:00
Creation Date2013-09-12 11:18:47
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2013-09-17 09:45:13
Document Title1
Document CreatorMicrosoft® Word 2010
Document Author: Jacob Sharony
FCC ID Filing: O4X3-63290

Navigation menu