Elpas Solutions B01 Personal Badge User Manual

Elpas Solutions Ltd. Personal Badge

a href="https://usermanual.wiki/Elpas-Solutions" itemprop="url"> Elpas Solutions >

User Manual

Personal Badge Instruction Manual and SpecsheetFCC ComplianceThe FCC Wants You to KnowThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by tuning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:a) Reorient or relocate the receiving antenna.b) Increase the separation between the equipmentand receiver.c) Connect the equipment to an outlet on a circuitdifferent from that to which the receiver isconnected.d) Consult the dealer or an experienced radio/TVtechnician.FCC WarningModifications not expressly approved by manufacturer could voidthe user authority to operate the equipment under FCC rules.15.9 (a) Labeling RequirementsThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions. (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.
IR and RF Personal BadgeP/N: PBU00916 (916.5 MHz)IR/RF Personal BadgeDescriptionA small, portable, personal clip-on badge. The badge sends Infra Red signals, inaddition to RF signals in the frequency of 916.5 MHz. The tag is used for locatingpeople in enclosed environments and providing various location dependent functions(open doors, alert indication, etc.).GeneralElectrical powersource One 3-Volt lithium batteryData rate 19,200 bits per secondMessageprotocol 4 bytes proprietary formatMessageduration 2.08 msButton on badge Location dependent function. Button press transmittedwith IR and RF message. Four identical button messagesare transmitted 0.4sec apart on every button press.Button press decoded by RF and IR RDRs or Central PC.Battery type CR-2430 RenataBattery life 18 months, assuming movement 8 hr / dayBattery statusindication Battery status transmitted with every messageLED indicatoron badge Activated with every RF and IR message.Badge ID Unique factory programmed (ID code, transmit rate,motion sensor activation and deactivation, etc.)Dimensions 79 x 39 x 7 mmWeight(includingbattery)24 gram
Download:
Mirror Download [FCC.gov]
Document ID111767
Application IDTlyayX+83m9QhLZ1KjGBmw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize4.14kB (51713 bits)
Date Submitted2000-08-03 00:00:00
Date Available2000-11-21 00:00:00
Creation Date2000-08-03 07:12:26
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2000-08-03 07:12:28
Document TitleUser Manual
FCC ID Filing: O4XB01

Navigation menu