Elster Solutions RX2EA4FI RX2EA4FI Printed Circuit Board Assembly User Manual 14 0372 Exhibit Cover
Elster Solutions, LLC RX2EA4FI Printed Circuit Board Assembly 14 0372 Exhibit Cover
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2478964 |
| Application ID | /qdJIJeEBlr53vQrNcIA5A== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 6.79kB (84832 bits) |
| Date Submitted | 2014-12-19 00:00:00 |
| Date Available | 2014-12-19 00:00:00 |
| Creation Date | 2014-12-17 09:23:22 |
| Producing Software | ScanSoft PDF Create! 7 |
| Document Lastmod | 2014-12-17 09:23:23 |
| Document Title | Microsoft Word - 14-0372 - Exhibit Cover.doc |
| Document Creator | Microsoft Word - 14-0372 - Exhibit Cover.doc |
| Document Author: | courtney.mcgann |
Certification Exhibit FCC ID: QZC-RX2EA4FI FCC Rule Part: 15.247 ACS Project Number: 14-0372 Manufacturer: Elster Solutions, LLC Model: RX2EA4FI 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Model RX2EA4FI PCBA manual General The Model RX2EA4FI printed circuit board assembly (PCBA) contains a frequency hopping spread spectrum radio operating in the 916-927.6 MHz ISM frequency band. It also contains circuitry for electricity metering. When the RX2EA4FI module is installed in a housing and meter base, it forms a complete electricity meter. Installations of multiple REX2 meters comprise part of an Advanced Metering Infrastructure (AMI) system that utilizes a proprietary network architecture and protocol devised by Elster Solutions. Device specifications Mode Frequency Band Classification Maximum Output Power Number of Channels Channel Spacing Data Rate 20 dB Occupied Bandwidth 99% Occupied Bandwidth Max channel dwell time within a 10 second period 35.5 and 142 kbps 916-927.6 MHz Frequency Hopping Spread Spectrum 250 mW 25 (per network) 400 kHz 35.5 kbps or 142 kbps 330 kHz 397 kHz < 0.4 seconds within a 10 second period NOTE: The meter only transmits on one network at a time. Both are 25 channel FHSS networks. Integrator’s instructions To properly install and integrate the Model RX2EA4FI PCBA into the approved Elster device, refer to the Elster drawing: IL42-4026. The radio module is manufactured directly onto the meter main circuit board, and the module is inserted into the electronic housing of the meter at manufacture. It has no user-serviceable parts. FCC and Industry Canada Compliance The radio module is manufactured directly onto the meter main circuit board, and the module is inserted into the electronic housing of the meter at manufacture. It has no user-serviceable parts. USER INFORMATION (PART 15.105) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • reorient or relocate the receiving antenna increase the separation between the equipment and the receiver connect the equipment into an outlet on a circuit different from that to which the receiver is connected consult the dealer or an experienced radio/TV technician for help If you experience trouble with this equipment, please use the Return Material Authorization (RMA) feature available at the Online Customer Services at www.elstersolutions.com. Do not attempt to repair this equipment yourself unless you are replacing the entire module. COMPLIANCE STATEMENT (FCC PART 15.19 AND INDUSTRY CANADA) This device complies with part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. ÉNONCÉ DE CONFORMITÉ Cet appareil est conforme à la Partie 15 des règles de la FCC et aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'utilisation de cet appareil est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences nocives et (2) cet appareil doit accepter toutes les interférences reçues notamment celles pouvant provoquer un fonctionnement intempestif de l'appareil. ANTENNA COMPLIANCE Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. REX2 meter: This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. REX2 meter: Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. • • • • On Board Printed Inverted F Antenna: 3.5 dBi PCTEL (MAXRAD) MFB9150 unity gain Fiberglass omnidirectional: 2.15 dBi PCTEL (MAXRAD) MFB9153 3dB Fiberglass omnidirectional: 5.15 dBi Antenex TRA9023P(NP) (white body) or Antenex TRAB9023P(NP) (black body): 3 dBi WARNING (PART 15.21) Changes or modifications not expressly approved by Elster could void the user's authority to operate the equipment. RF RADIATION SAFETY GUIDELINES This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated to provide a separation distance of at least 20cm from all persons. COLLOCATION STATEMENT This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 3 XMP Toolkit : 3.1-701 Producer : ScanSoft PDF Create! 7 Keywords : Creator Tool : Microsoft Word - 14-0372 - Exhibit Cover.doc Create Date : 2014:12:17 09:23:22-05:00 Modify Date : 2014:12:17 09:23:23-05:00 Title : Microsoft Word - 14-0372 - Exhibit Cover.doc Creator : courtney.mcgann Description : Author : courtney.mcgann Subject :EXIF Metadata provided by EXIF.tools