Elster Solutions WWIC3EVM Electric Meter Module with Cellular/PCS CDMA and 900MHz LAN Radio User Manual Users Guide

Elster Solutions, LLC Electric Meter Module with Cellular/PCS CDMA and 900MHz LAN Radio Users Guide

Users Guide

GeneralThis leaflet explains how to properly install the modular EA_Gatekeeper 3G into approved Elsterdevices. The modular EA_Gatekeeper 3G has the following configurations:Integration instructionsTo properly install and integrate the modular EA_Gatekeeper 3G into the approved Elster device, referto the Elster drawing: 5D26132.FCC ComplianceImportantThe modular EA_Gatekeeper 3G complies with Part 15 of the FCC Rules. Changes or modifications notexpressly approved by Elster could void the user's authority to operate the equipment.EV-DO FCC & IC Information• FCC ID: QZCWWIC3EVM• IC: 4557A- WWIC3EVMUMTS FCC & IC Information• FCC ID: QZCWWIC3UM• IC: 4557A- WWIC3UMDescription Model numberEA_Gatekeeper 3G, EV-DO, internal WAN antenna EA_NMGK3_EVVEA_Gatekeeper 3G, EV-DO, external WAN antenna EA_NMGK3_EVXVEA_Gatekeeper 3G, UMTS, internal WAN antenna EA_NMGK3_UAEA_Gatekeeper 3G, UMTS, external WAN antenna EA_NMGK3_UXAModular EA_Gatekeeper 3G integrator’s guidePG42-2017A
Modular EA_Gatekeeper 3G integrator’s guide 2Compliance StatementThis device complies with Part 15 of the FCC Rules and Class B digital apparatus requirements for ICES-003. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that maycause undesired operation of the device.NoteThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules and ICES-003. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of the following measures:• reorient or relocate the receiving antenna• increase the separation between the equipment and the receiver• connect the equipment into an outlet on a circuit different from that to which the receiver is connected• consult the dealer or an experienced radio/TV technician for helpIf you experience trouble with this equipment, please use the Return Material Authorization (RMA)feature available from Elster by visiting the customer support section of www.elstersolutions.com. Donot attempt to repair this equipment yourself.Antenna ComplianceThe modular EA_Gatekeeper 3G has been tested and certified with the internal antenna(s) and externalantenna(s) provided by Elster. The internal antenna(s) must not be modified or replaced.CautionThe antennas used for these transmitters must be installed to provide a separation of at least 20 cmfrom all persons and must not be collocated or operated in conjunction with any other antenna ortransmitter except as documented in the FCC application. These devices have been approved forsimultaneous transmission of the collocated EA_LAN and cellular/PCS transmitters. Users and installersmust be provided with antenna installation instructions and transmitter operating conditions forsatisfying RF exposure compliance.
Modular EA_Gatekeeper 3G integrator’s guide 3Conformité aux règles de la FCC et d'Industrie CanadaImportantLe module EA_Gatekeeper 3G est conforme à la Partie 15 des règles de la FCC. Tout changement oumodification non approuvé explicitement par Elster pourrait annuler le droit de l'utilisateur à exploitercet équipement.Information relative à la FCC et à Industrie Canada EV-DO• Code d'identification de la FCC : QZCWWIC3EVM• Code d'identification auprès d'Industrie Canada : 4557A- WWIC3EVMInformation relative à la FCC et à Industrie Canada UMTS• Code d'identification de la FCC : QZCWWIC3UM• Code d'identification auprès d'Industrie Canada : 4557A- WWIC3UMÉnoncé de conformitéCet appareil est conforme à la Partie 15 des règles de la FCC et aux exigences relatives aux appareilsnumériques de classe B conformément à l'avis sur la compatibilité électromagnétique ACEM-3.L'utilisation de cet appareil est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pasprovoquer d'interférences nocives et (2) cet appareil doit accepter toutes les interférences reçuesnotamment celles pouvant provoquer un fonctionnement intempestif de l'appareil.RemarqueCet équipement a été testé et jugé conforme aux limites définies pour les appareils numériques declasse B, conformément à la Partie 15 des règles de la FCC et à l'avis NMB-003. Ces limites sontconçues pour assurer une protection raisonnable contre les interférences nocives dans une installationrésidentielle. Cet équipement produit, utilise et peut émettre de l'énergie de fréquence radio, et s'il n'estpas installé et utilisé conformément aux directives, celui-ci peut provoquer des interférences nocivesaux communications radio. Toutefois, on ne peut garantir qu'aucune interférence ne surviendra dansle cadre d'une installation particulière. Si cet équipement provoque de l'interférence nocive à laréception des signaux de radio ou de télévision, tel que déterminé en mettant l'appareil hors circuit eten circuit, on invite l'utilisateur à essayer de corriger l'interférence en appliquant une ou plusieurs desmesures suivantes :• réorienter ou déplacer l'antenne de réception• augmenter la distance entre l'équipement et le récepteur• raccorder l'équipement à une prise électrique faisant partie d'un circuit différent de celui auquel lerécepteur est raccordé• consulter le vendeur ou un technicien de radio/télévision chevronné pour obtenir de l'aideSi vous éprouvez des problèmes avec cet appareil, veuillez utiliser le processus de demande de retourde matériel (RMR) offert par Elster en composant le +1 905 634 4895. Ne pas tenter de réparer soi-même cet équipement.Conformité de l'antenneLe module EA_Gatekeeper 3G a été testé et certifié pour son utilisation avec les antennes internes etexternes fournies par Elster. L'antenne interne ne doit pas être modifiée ni remplacée.
Modular EA_Gatekeeper 3G integrator’s guide 4DISCLAIMER OF WARRANTIES AND LIMITATIONS OF LIABILITYThere are no understandings, agreements, representations, or warranties either express or implied, including warranties of merchantability or fitnessfor a particular purpose, other than those specifically set out by any existing contract between the parties. Any such contract states the entireobligation of the seller. The contents of this document shall not become part of or modify any prior existing agreement, commitment, or relationship.The information, recommendations, descriptions, and safety notices in this document are based on Elster Solutions, LLC experience and judgmentwith respect to operation and maintenance of the described product. This information should not be considered as all-inclusive or covering allcontingencies. If further information is required, Elster Solutions, LLC should be consulted.No warranties, either expressed or implied, including warranties of fitness for a particular purpose or merchantability, or warranties arising from thecourse of dealing or usage of trade, are made regarding the information, recommendations, descriptions, warnings, and cautions contained herein.In no event will Elster Solutions, LLC be responsible to the user in contract, in tort (including negligence), strict liability or otherwise for any special,indirect, incidental, or consequential damage or loss whatsoever, including but not limited to: damage or loss of use of equipment, cost of capital,loss of profits or revenues, or claims against the user by its customers resulting from the use of the information, recommendations, descriptions, andsafety notices contained herein.© 2013 by Elster. All rights reserved. Produced in the United States.Elster SolutionsRaleigh, North CarolinaTechnical support: 800 338 5251Mise en gardeLes antennes utilisées pour ces émetteurs-récepteurs doivent être installées de façon à assurer unedistance d'au moins 20 cm de toute personne, et ne doivent pas être cohébergées ou exploitées enconjonction avec une autre antenne ou un autre émetteur-récepteur, sauf tel que documenté dans lademande auprès de la FCC. Ces appareils ont été approuvés pour permettre une transmissionsimultanée avec les modules de réseau local EA_LAN et les émetteurs-récepteurs cellulaires/PCScohébergés. On doit fournir aux utilisateurs et aux installateurs des directives sur l'installation del'antenne et les conditions d'exploitation de l'émetteur-récepteur afin de respecter les normesd'exposition aux fréquences radio.

Navigation menu