Embed RAD000 Network Adapter with 802.15.4 (Zigbee) operation User Manual

Embed International Pty Ltd Network Adapter with 802.15.4 (Zigbee) operation

User Manual

Embed Wireless U.S.A. Equipment Installation Guide Revised – 20th April, 2012 www.embedcard.com
Copyright © by Embed International Pty Ltd Notice of Rights All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Embed. For more information on getting permission for reprints and excerpts, contact Embed. Notice of Liability The information in this document is distributed on an “as is” basis, without warranty. While every precaution has been taken in the preparation of this document, neither the author or Embed shall have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the instructions contained in this document or by the computer software or hardware products described herein. www.embedcard.com Asia-Pacific – Head Office Embed International Pty Ltd 2 Neil St. Osborne Park, WA 6017 Australia Telephone +61 (8) 9340 0100 Facsimile +61 (8) 9340 0199 Information: info@embed.com Sales: sales@embed.com Support: support@embed.com North & South America Embed USA LLC 1621 West Crosby Rd. Suite 100A Carrollton, TX 75006 USA Telephone (469) 521-8000 Facsimile (214) 260-0976 Information: info@embedcard.com Sales: sales@embedcard.com Support: USAsupport@embedcard.com Middle East Embed International Pty Ltd - Middle East Q3-197, PO Box: 122113 Sharjah Airport International Free (SAIF) Zone Sharjah, UAE Telephone +971 (6) 5579140 +971 (6) 5579141 Information: infoME@embedcard.com Sales: salesME@embedcard.com Support: supportME@embedcard.com UK and Europe Embed Playsafe 14 The Maltings Brassmill Lane Bath BA1 3JL United Kingdom Telephone +44 (208) 242 4946 Information: infoeu@embedcard.com Sales: saleseu@embedcard.com Support: supporteu@embedcard.com
Table of Contents Overview ................................................................................................................................................. 4 Do not use in life critical or applications requiring high reliability ......................................................... 4 Protecting against electrostatic discharge ............................................................................................ 4 Power Supply Details Range................................................................................................................. 4 Other information and warnings: ......................................................................................................... 4 Product Directory .................................................................................................................................... 5 Embed Wireless Device/Client ............................................................................................................. 5 Embed Wireless Coordinator/Server .................................................................................................... 5 Embed Wireless Client/Device Game Installation ..................................................................................... 6 Embed Wireless Server/Coordinator Game Installation ........................................................................... 7 FCC Compliance Statement ..................................................................................................................... 8 Waste Electrical and Electronic Equipment (WEEE) Statement................................................................. 9 DECLARATION OF CONFORMITY ............................................................................................. 10
Embed International PTY LTD 4 www.embedcard.com Overview This document outlines the process of installation and setup for the Embed Wireless hardware. Topics to be covered include Coordinator and Device installation, wiring details, and wireless settings. This guide assumes that the installer has basic electronic skills. Do not use in life critical or applications requiring high reliability The Embed Wireless system is not intended for use in systems that may affect human life or that require a very high degree of reliability such as medical equipment, nuclear facilities, aerospace equipment or transportation equipment. Embed does not assume any liability for accidents resulting in injury or death, or for any damages to property that may occur as a result of using the product in such facilities, equipment, or control systems. Protecting against electrostatic discharge Electrostatic discharge can damage electronic components including the Embed Wireless System. Please observe electrostatic discharge precautions for handling or installing this equipment. Power Supply Details Range The Embed Wireless should be operated with a power supply with a voltage between 9 – 15 V, which can supply at least 300 mA. Other information and warnings: • Embed Wireless is intended for operation between 55 0C and -20 OC. • Embed Wireless is not intended for use at home.
Embed International PTY LTD Product Directory Embed Wireless Device/ClientThe wireless client allows for a cableconnection between Controller and Embed Wireless Coordinator/Server’s. Embed Wireless Coordinator/ServerThe wireless coordinator/Server enables for communications with Embed Wireless devices/clients and the Game Server. Embed International PTY LTD 5 Embed Wireless Device/Client: The wireless client allows for a cable-free ontroller and Embed Wireless Coordinator/Server’s. Embed Wireless Coordinator/Server: The wireless coordinator/Server enables for communications with Embed Wireless devices/clients and the Game Server. www.embedcard.com
Embed International PTY LTD 6 www.embedcard.com Embed Wireless Client/Device Game Installation Step 1: Connect the RS485 patch cable to the wireless client J1. Step 2: Connect 12 V (minimum of 300 m.A.) to J1 on the Embed Wireless Client/Device. Step 3: Connect and orient the antenna straight up or down. Note 1: Embed Wireless should not be installed in, nearby or on metal enclosures (such as a full metal cabinet), otherwise performance may be severely degraded. Note 2: Embed Wireless should be installed so that it is more than 20cm from any possible human bodies. Note 3: Embed Wireless should be installed away from sources of electrical noise (such as motors, air conditioner units etc).
Embed International PTY LTD 7 www.embedcard.com Embed Wireless Server/Coordinator Game Installation Step 1: Connect the RS485 patch cable to the wireless client J1. Step 2: Connect and orient the antenna straight up or down. Note 1: Embed Wireless should not be installed in, nearby or on metal enclosures (such as a full metal cabinet), otherwise performance may be severely degraded. Note 2: Embed Wireless should be installed so that it is more than 20cm from any possible human bodies. Note 3: Embed Wireless should be installed away from sources of electrical noise (such as motors, air conditioner units etc).
Embed International PTY LTD 8 www.embedcard.com FCC Compliance Statement The following product has been tested and certified as compliant with the regulations and guidelines set forth in Part 15 of FCC Rules: Manufacturer: Embed International Pty Ltd Model: RAD-002 Part 15 of FCC Rules This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules which provide reasonable protection against harmful interference in a residential area. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept and interference received including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules which provide reasonable protection against harmful interference in residential area. This equipment generates and uses radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. In the unlikely event that there is interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult with the dealer or ask an experienced radio/TV technician for help. Any changes or modifications to this equipment not expressly approved by Embed could void the user’s authority to operate this equipment.
Embed International PTY LTD 9 www.embedcard.com Waste Electrical and Electronic Equipment (WEEE) Statement Embed complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed. In order to avoid dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are dispensing in a sound way. For proper disposal instructions go to, http://www.embedcard.com/recycle For more information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please go to, http://ec.europa.eu/environment/waste/weee/index_en.htm Please retain this for future reference.
DECLARATION OF CONFORMITY With regard to the R&TTE Directive 1999/5/EC We, Embed International Pty Ltd 2 Neil St Osborne Park, WA Australia 6017 Declare under our sole responsibility that the product, Product: EI-WIR-180 Embed Network Adapter 2.4GHz IEEE 802.15.4 RAD-002 Embed Network Adapter 2.4GHz IEEE 802.15.4 Fulfills the essential requirements of the directive 1999/5/EC as attested by the conformity with the following harmonized standards: Health & Safety ETSI EN 60950-1 EMC ETSI EN 301 489-1 ETSI EN 301 489-3 Radio ETSI EN 300 440-2 ETSI EN 300 420-1 The conformity assessment procedure referred to in Article 10.4 and Annex III of Directive 1999/5/EC has been followed. In addition, complies with Low Voltage Directive 2006/95/EC. This product carries the CE Mark: Date & Place of Issue: 31st March 2011, Perth, Australia Signature: Mark Easte Managing Director Embed International Pty Ltd 2 Neil St Osborne Park, WA Australia 6017

Navigation menu