Emerge Technologies ETSELFPHB Bluetooth Holiday Photo Booth Selfie Kit User Manual
Emerge Technologies, Inc Bluetooth Holiday Photo Booth Selfie Kit
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2890300 |
| Application ID | KDLK3s05ZSjA7rsacwTcGA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 33.31kB (416380 bits) |
| Date Submitted | 2016-01-29 00:00:00 |
| Date Available | 2016-01-30 00:00:00 |
| Creation Date | 2015-10-13 14:55:02 |
| Producing Software | Adobe Acrobat 7.0 Image Conversion Plug-in |
| Document Lastmod | 2015-10-13 14:55:13 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat 7.0 |
Bluetooth Holiday Photo Booth Sellie Kit Product Manual ModeleTSELFPHB * The pairing of camera and Seth: Kit need not password. The pairing is on—going when tlte blue led light is flashing quickly. please operate in 5 minutes..otherwise.You need to restart the powcr.rescan and repair. 4.3 Autodyne put tltc tttobile phone to tlte Selfie Kit -‘ entcr camera application “ l§3 " * stretch tlte ntonopod-prcss the key of ‘prcss' * Some devices with Android system might not ttonnally work with tlte Sclfie Kit .11: that case.please download an app‘kjstar-SéS‘from our website. No switching system View. a key support both Android and ios Thanks for your support of this wireless mobile phone Selfie Kit from KJstat CotLtdu CltinaJ'his Selfie Kit is based on tlte Bluetooth HID wireless communication technology. Please confinn tltat your smart photte supports this technologytThis Selfie Kit can intelligently recognizes and works with sman phou ed with iOS 4.0 or Android 3.0 ()S or above.ltlso.it can be manually switched if necessary. ltFunctiou Autodync and video wirelessly by Mobile 1. Description of the whole package Wireless Mobile Phone Selfle Kit : lpiece Phone Clamp: 1 piece Gasket: 1 piece USB Charging Cable: l piece Product Manual: 1 piece Warranty Card: l piece 3. Specification 3.] Working environment temperature: - lO<+40°C 3.2 Working cttvirotttttettt relative l‘lulllldlly:l0%~90%: 6.Cantion and safety 6.1Plutse tutti the instruction mrclully before usage: 6.2 Please tum off tlte nearby blnetuoth to 6 avoid tlte signal interference: 6.3 it may conflict whett using some mobile phone keyboard with it simultaneously. please close the bluetooth or turn of! the power of monopod. 6.4 Safety 6.4, I Please do not dismantle tlte product: 6.4.2 Please do not use corrosive solvent to clean it: 6.43 Forbidden to use it or charging under high temperature or strong light; 6.4.4 Forbidden louse it in the rain with damp or soaked; 6.4.5 Forbidden to tltrow it into fires.) as to avoid explosion: 6.4.6 Please do not knock it heavily. 3.3 Battery Capacity: 45mAH; 3.4 Charging Voltage: D(.'5.0V; 3.5 charging requiretnent: LS to 2 hours; 3.6 Autodyne Frequence: 500 times: 3.7 Standby Titne: IOO hours: 3.8 Memory quantity: 4 titnes: 3.9Will this product automatically 8 minutes into the dormanmhe dormnnt state does ttot light.press the camera button. catt not wake up.necd machine after the boot. 4. Usage instructions 4.1 Full charging titnc: 2 hour 4.2 PairingzMobile phone and Selfie Kit Apple lOS Systemzopeu the ‘Setting' *' Bluetooth" turn on ntonopod-e Searching autodyne system 'kjstar" ~ cnlcr llte system - complete Pairing Android System: open the ‘Scttiug" ~Bluctonth Scanning—turnun SelfieKit —Searchiug autodyne system ‘kjstttr' ~enter the system _ cotttpletePairittg .2. 7. Other cautious: 7.1 No Power or Power turned off: LED turned off 7.2 Bluetooth PairingtBlue LED light keep flashing at middle frequency 7.3 Taking photo:Blue LED Light flash one time 74 Blue Pairing Successfuly or Wake up SleeszED Light keep flashing quickly. 7.5 [ow voltage:LED Light keep flashing slowly. 7.6 ChargingIRed LED Light on: Full Charg- ittg Red LED light off. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modificafions not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2015:10:13 14:55:13+08:00 Create Date : 2015:10:13 14:55:02+08:00 Metadata Date : 2015:10:13 14:55:13+08:00 Creator Tool : Adobe Acrobat 7.0 Format : application/pdf Document ID : uuid:10153d1b-1393-449d-a905-9bd5b3572efb Instance ID : uuid:f274008d-e25f-49b7-af0b-e0e416cc188a Producer : Adobe Acrobat 7.0 Image Conversion Plug-in Page Count : 2 Creator : Adobe Acrobat 7.0EXIF Metadata provided by EXIF.tools