Emerson Digital Cold Chain 101001 SmartTraxx Portable User Manual FCC Part 15
Locus Solutions LLC SmartTraxx Portable FCC Part 15
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1919044 |
| Application ID | FF4ODbSfh0RETGhdDMHVrA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.17kB (114591 bits) |
| Date Submitted | 2013-03-18 00:00:00 |
| Date Available | 2013-03-18 00:00:00 |
| Creation Date | 2013-03-07 11:38:53 |
| Producing Software | Acrobat Distiller 8.3.1 (Windows) |
| Document Lastmod | 2013-03-07 11:39:43 |
| Document Title | FCC Part 15 |
| Document Creator | Acrobat PDFMaker 8.1 for Word |
| Document Author: | Brooke Copeland |
Certification Exhibit FCC ID: AMH101001 IC: 10124A-101001 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Project: 12-2035 Manufacturer: Locus Solutions LLC Model: SmartTraxx Portable User Manual 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 LocusTraxx TM User Guide LocusTraxx.com 14924 Corporate Road S. Jupiter, Fl 33478 877-998-7299 System Description The Locus Traxx Portable wireless system enables fresh produce shippers to deliver produce with a freshness confidence. The system does this with a series of radio systems that wirelessly track product location, temperature, and other condition and, or shipment sensors. Sensor modules termed “Smart Tags” transmit their information via a 802.15.4 local wireless network back to a central portable or fixed unit. The portable, or fixed units, concatenate this local sensor information with position data from a dedicated GPS receiver and transmits the data package to a central motoring facility through either a GSM cellular or Iridium network. Installation Hooking up the Portable System 1. Remove the portable unit from the shipping container. On the bottom side of the device, verify that the Green LED is flashing indicating that the unit is awake. 2. Attach the portable unit to the rear trailer door using the built in lever to ratchet the pole lock tightly to the pole. 3. Remove the Smart Tag unit(s) from the shipping case and place on item to be monitored. For optimal performance, insure that the Tag operates within approximately 70 feet of the portable mounted section. 4. Verify that the system is correctly monitoring the tag temperature and current location. Monitor the Item 1. In a web browser open www.locusraxx.com and login with the user ID and password provided. LocusTraxx.com 14924 Corporate Road S. Jupiter, Fl 33478 877-998-7299 Radio Comments Optimum performance of the Smart Traxx system may require repositioning of the Smart Tag in relation to the fixed or portable device. Excessive attenuation of the RF communication can result if the line of sight is obstructed by materials that significantly attenuate the signal. It is therefore advised to keep this in mind when positioning your wireless system. Warning: Changes or modifications to this device not expressly approved by Locus Traxx could void the user’s authority to operate the equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. 802.15.4 Quarter Wave Dipole: 2.15 dBi. GSM: 0 dBi max. LocusTraxx.com 14924 Corporate Road S. Jupiter, Fl 33478 877-998-7299 Class B Devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. LocusTraxx.com 14924 Corporate Road S. Jupiter, Fl 33478 877-998-7299
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Producer : Acrobat Distiller 8.3.1 (Windows) Company : Advanced Compliance Solutions, Inc. Source Modified : D:20130306160949 Create Date : 2013:03:07 11:38:53-05:00 Creator Tool : Acrobat PDFMaker 8.1 for Word Modify Date : 2013:03:07 11:39:43-05:00 Metadata Date : 2013:03:07 11:39:43-05:00 Document ID : uuid:8c3124e2-357b-4890-80f4-8f528ae108fe Instance ID : uuid:904c82ec-46a5-48b7-9341-738673576ecc Subject : 3 Format : application/pdf Creator : Brooke Copeland Title : FCC Part 15 Page Count : 5 Page Layout : OneColumn Language : EN-US Author : Brooke CopelandEXIF Metadata provided by EXIF.tools