Emerson Process Management Controlwave Remote Ethernet I O Users Manual
Hoja-de-Datos_Bristo.. Hoja-de-Datos_Bristol-ControlWave-Ethernet-IO
ControlWave Remote Ethernet IO to the manual 2b706ad1-3a31-4613-aad8-7ce598b07946
2015-02-06
: Emerson-Process-Management Emerson-Process-Management-Controlwave-Remote-Ethernet-I-O-Users-Manual-540113 emerson-process-management-controlwave-remote-ethernet-i-o-users-manual-540113 emerson-process-management pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Product Data Document 420DS-2b July 16, 2007 - Page Bristol® ControlWave® Remote Ethernet I/O With the ever-increasing demand for distributed I/O architectures Bristol® ControlWave® Remote I/O modules, from Emerson Process Management, are the ideal solution to minimize installation cost. The compact DIN-rail mount modules provide an open connectivity through 10 Mbps Ethernet and 38.4 KB serial RS 485. The wide range of module I/O configurations brings exceptional flexibility to network diversity. Each module is designed and rated for harsh industrial environments, a perfect compliment to the ControlWave Process Automation Management Solution as well as our Network 3000 measurement and control system. Features • Open Modbus (Modbus TCP) Ethernet connectivity • RS 485 Modbus RTU or Modbus ASCII • Easy-to-use ConfigTools software configuration • Internal 24 V dc loop power minimizes wiring cost • ‘Hot Swap’ I/O module replacement • 10 – 30 V dc power input • -30 to +70°C operating temperature range • CSA, UL Class I, Div. 2 Groups A-D, and CE approved Specifications All I/O • Compact 4 ¾” W x 3 ¼” H x 4 1/8” D • 10 – 30 V dc power input • 1.2 Watt typical per module (48 mA @ 24 Vdc) – varies by module and load • Temperature: -30 to +70°C operating temperature range Remote Automation Solutions Website: www.EmersonProcess.com/Remote • Humidity: 5 – 95% non-condensing • RS 485 port Master or Slave up to 38400 baud – up to 32 nodes per line • Up to 16,000 nodes per network • 10Base T at 10 Mbps Ethernet port • 1200 V RMS 1 minute isolation on Ethernet port • ESD (Electro Static Discharge) withstand: 8KV • Vibration meets IEC 68-2-6 1g for 10 Hz to 150 Hz .5g for 150 Hz to 2000 Hz The ControlWave Remote Ethernet I/O series consists of seven modules ControlWave Discrete Input Module • Number of inputs: 16 • Input source or sink: Configurable • Input voltage: 12/24 V AC/DC • Input resistance: 3.6 KΩ • One High Speed Counter channel up to 2 KHz • Scan rate: 2 mS • Power: .75 watt Product Data Document 420DS-2b July 16, 2007 - Page Bristol® Remote Ethernet I/O ControlWave Discrete Output Module • Between inputs and ground: 1200 Volts • Number of outputs: 16 • • Output voltage: 10 to 30 Vdc Input impedance: Voltage 200 KΩ Current 100 Ohms • Maximum output current per channel: 1 Amp • Input current protection: field replaceable fusible shunts • Maximum output current (all 8 channels): 8 Amp • Scan rate: 100 mS • Maximum off state leakage current: 0.05 mA • Pulse duration output: Configurable • Scan rate: 2 mS ControlWave RTD/DI Input Module • Number of inputs: 4 RTD inputs and 4 DI • RTD inputs: 100 ohm platinum, -200 to +850°C ControlWave Analog Input Module • A/D resolution: 16 bit (0.0031%) • Number of inputs: 16 • Scan rate: 700 ms (4 RTD) • Input range: 4-20 mA - internal or external loop powered • DI specifications same as for 16 DI module • A/D resolution: 14 bit (0.01%) • Scan rate: 20 ms (4 DI) • Full scale accuracy @ 20°C: +/-0.05% ControlWave Mixed 8DI/8AI Input Module • Span and offset temp. coefficient: +/- 50 ppm per°C • Number of inputs: 8 AI and 8 DI • Input impedance: 100 Ohms • Specification same as 16 AI module and 16 DI module • Input current protection: field replaceable fusible shunts ControlWave Mixed 8DI/8DO Input Module • Scan rate: 5 mS • Number of inputs: 8 DI and 8 DO • Specification same as 16 DI module and 16 DO modules ControlWave Analog Instrumentation Input Module • Number of inputs: 8 ControlWave Mixed 8AI/4AO Module • Input range: Isolated Current or Thermocouple • Number of inputs: 8 AI and 4 AO • 4-20 mA - internal or external loop powered • Specification for AI’s same as 16 AI module • J, K, E, R, T, B, C, N, S thermocouple Coldjunction compensated and reported as °F, °C, or 0.1°C • Output range: 4 – 20 mA • D/A resolution: 16 bit • Full scale accuracy @ 20°C: +/-0.02% • Maximum output settling time: 5 mS • External loop supply: 10 – 30 V dc • Load resistance: 0 – 750 Ω • A/D resolution: 16 bit (0.0031%) • Full scale accuracy @ 20°C: +/-0.02% • Span and offset temp. coefficient: +/- 30 ppm per°C • Common mode isolation: • Short circuit protection: Current limiting • Between two input terminals: +/-25 V dc • Scan rate: 5 mS Remote Automation Solutions Website: www.EmersonProcess.com/Remote Product Data Document 420DS-2b July 16, 2007 - Page Bristol® Remote Ethernet I/O ControlWave Ethernet I/O Configuration Tools Remote Setup Module The ControlWave Ethernet I/O Tool Kit is a Windows configuration utility for initial setup and testing of all Ethernet I/O modules. This easy to use utility allows assignment of communication paramenters In conjunction with the configuration software, the Remote Setup Module provides a RS 232 interface to the PC allowing the Ethernet module base to be initially configured with a I/P, module address RS 485 port baud rate, etc. The Setup module plugs into any Ethernet I/O base so one Setup module can be used for the entire system. All Ethernet I/O modules can be configured through a local Ethernet connection with the configuration software only or through a Ethernet network using the Setup module. The Setup module is most useful when configuring a RS 485 network since it allows configuration through a RS 232 PC port rather than requiring the RS 485 in the PC. including I/P address, comm port baud rate and module address. It also provides I/O setup, tag name assignment, scaling factors, etc. Once the module is configured it can be tested for proper operation before being put into operation. © 2007 Remote Automation Solutions, division of Emerson Process Management. All rights reserved. Bristol, Inc., Bristol Babcock Ltd, Bristol Canada, BBI SA de CV and the Flow Computer Division , are wholly owned subsidiaries of Emerson Electric Co. doing business as Remote Automation Solutions (“RAS”), a division of Emerson Process Management. FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow and Helicoid are trademarks of RAS. AMS, PlantWeb and the PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a trademark and service mark of the Emerson Electric Co. All other marks are property of their respective owners. The contents of this publication are presented for informational purposes only. While every effort has been made to ensure informational accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. RAS reserves the right to modify or improve the designs or specifications of such products at any time without notice. All sales are governed by RAS’ terms and conditions which are available upon request. RAS does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any RAS product remains solely with the purchaser and end-user. Emerson Process Management Remote Automation Solutions Watertown, CT 06795 USA Mississauga, ON 06795 Canada Worcester WR3 8YB UK T 1 (860) 945-2200 T 1 (905) 362-0880 T 44 (1) 905-856950 Website: www.EmersonProcess.com/Remote
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1.1-111 Create Date : 2007:08:24 10:11:52-04:00 Metadata Date : 2007:08:24 10:11:53-04:00 Modify Date : 2007:08:24 10:11:53-04:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Instance ID : uuid:cc28993b-7ac7-4e89-8045-602de056bece Document ID : adobe:docid:indd:aa1b01b4-33c5-11dc-87f9-95872396e8d4 Rendition Class : proof:pdf Derived From Instance ID : 792e2aa9-e1d7-11da-99a9-bb55861974e9 Derived From Document ID : adobe:docid:indd:3a2f3f5e-e122-11da-af56-ca92ad94ea34 Manifest Link Form : ReferenceStream Manifest Placed X Resolution : 300.00 Manifest Placed Y Resolution : 300.00 Manifest Placed Resolution Unit : Inches Manifest Reference Instance ID : uuid:DF257867182BDC11A4CBD621E1E6385A Manifest Reference Document ID : uuid:DE257867182BDC11A4CBD621E1E6385A Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 3 Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools