Emerson Process Management Electric Co Whiteboard Accessories 3 9000 522 Users Manual 00522

2015-02-06

• Table of Contents
• Introduction
  • 1.1 Description of Manual
    • Section 1 - Introduction
    • Section 2 - Installation and Startup
    • Section 3 - Getting Started
    • Section 4 - Control Functions
    • Section 5 - Application Functions
    • Section 6 - Chromatogram Viewer
    • Section 7 - Reports
    • Section 8 - Logs
    • Section 9 - Data Collection
    • Section 10 - Modbus Test
    • Appendix A, PC Config Report
    • Appendix B, Component Data Table
    • Appendix C, Data Computations
    • Appendix D, Analog Output Cal. 2350A GC
    • Appendix E, Upgrade 2350A GC S/W and 2350 EPROMS
    • Appendix F, Modbus Reg. List for 2350A GC
  • 1.2 Description of Online Help
  • 1.3 Description of MON2000
• Installation and Setup
  • 2.1 System Requirements
  • 2.2 Installing MON2000
  • 2.3 Installing the CrypKey License Service for MON2000 PLUS
  • 2.4 Copying MON2000 to Disks
  • 2.5 Transferring a MON2000 PLUS License
  • 2.6 Uninstalling MON2000
  • 2.7 Starting MON2000
  • 2.8 Performing Your First Logon
    • 2.8.1 The Initial Logon
    • 2.8.2 Registering MON2000
    • 2.8.3 Update MON2000
  • 2.9 Checklist for Setting Up MON2000
  • 2.10 Communications
    • 2.10.1 Connect to the GC Unit
    • 2.10.2 Disconnect from GC Unit
  • 2.11 Customizing MON2000
    • 2.11.1 Configure Users
    • 2.11.2 Set Up GC Directory
    • 2.11.3 Dial-up Connection
    • 2.11.4 Modem Initialization Strings/Setup
      • Black Box - Modem 325
      • U.S. Robotics Sportster
      • GVC/MaxTech 28.8 Kbps Modem
  • 2.12 2350 to 2350A Retrofit Instructions
  • 2.13 Conversion Process
  • 2.14 BASIC 2350A CONFIGURATION
  • 2.15 2350A Options
    • 2.15.1 The COM4A Board
    • 2.15.2 2350A Modem Installation
    • 2.15.3 2350A Ethernet Installation
    • 2.15.4 Ethernet TCP/IP Settings
    • 2.15.5 MON2000 TCP/IP Settings
  • 2.16 CONNECT VIA GC EXTERNAL MODEM
    • 2.16.1 Hardware Setup
    • 2.16.2 Select Program Settings
    • 2.16.3 Generate PC Config Report
  • 2.17 Downloading an Application
  • 2.18 Upgrading Flash
  • 2.19 Offline Edit of GC Application
    • 2.19.1 File Selection
    • 2.19.2 Upload Application
    • 2.19.3 Upload BOS
• Getting Started
  • 3.1 Logging On
  • 3.2 Logging Off
  • 3.3 MON2000 User Interface
    • 3.3.1 Main Window
    • 3.3.2 GC Status Bar
    • 3.3.3 View Menu
    • 3.3.4 ToolTips
    • 3.3.5 Data Entry and Function Features
    • 3.3.6 Shortcut to Save or Print Data
  • 3.4 Keyboard Shortcuts
  • 3.5 Procedures Guide
  • 3.6 Keylock Switch Control
  • 3.7 Configuring Your Printer
  • 3.8 Using Online Help
  • 3.9 Operating Modes for Model 700
  • 3.10 About MON2000
• Control Functions
  • 4.1 Auto Sequence
  • 4.2 Single Stream
  • 4.3 Halt
  • 4.4 Calibration
  • 4.5 Baseline Run
  • 4.6 Auto BTU Start Up and Valve Timing
    • 4.6.1 Initiating an Auto BTU Start Up Run
    • 4.6.2 Starting a Valve Timing Run
  • 4.7 GC Time
    • 4.7.1 View GC Time
    • 4.7.2 Set GC Time
  • 4.8 Stop Now
• Application Functions
  • 5.1 System
  • 5.2 Component Data
    • 5.2.1 Select Standard Component(s)
    • 5.2.2 Select Standard Values
    • 5.2.3 Update Standard Component(s)
    • 5.2.4 View Raw Data
    • 5.2.5 Sort Retention Time
  • 5.3 Timed Events
    • Timed Events Description
    • Valve Events
    • Integration Events
    • Spectrum Gain Events
  • 5.4 User Defined
    • 5.4.1 Numeric
    • 5.4.2 Selection
    • 5.4.3 Text Strings
  • 5.5 Calculations
    • 5.5.1 Control
    • 5.5.2 Averages
    • 5.5.3 User Defined
  • 5.6 Limit Alarms
    • Limit Alarms Description
  • 5.7 Discrete Alarms
    • 5.7.1 Delayed Discrete Alarms
  • 5.8 Streams
  • 5.9 Analog Inputs
  • 5.10 Analog Outputs
    • 5.10.1 Analog Output Dialog Description
    • 5.10.2 Changing a Variable
    • 5.10.3 Changing the Bargraph
    • 5.10.4 Performing a Manual Calibration
    • 5.10.5 Performing an Automated Calibration
  • 5.11 Discrete Inputs
  • 5.12 Discrete Outputs
  • 5.13 Valves
  • 5.14 Temperature Control
  • 5.15 FID Configuration
  • 5.16 LOI Status Variables
  • 5.17 Serial Ports
    • 5.17.1 Serial Ports Configuration
  • 5.18 GC Serial Port and Cable Configurations
    • 5.18.1 GC DB-9 Serial to External Modem DB-25
    • 5.18.2 GC Phoenix Plug to External Modem DB-25
    • 5.18.3 Com ID
    • 5.18.4 Registers
    • 5.18.5 Setting Optional Base Pressures
    • 5.18.6 Setting Optional Base Results
  • 5.19 TCP/IP, Subnet, and Gateway Menu
• Chromatogram Viewer
  • 6.1 Chromatogram Viewer Function
  • 6.2 Viewing a Live Chromatogram
    • 6.2.1 From Online GC
    • 6.2.2 From GC Archive
    • 6.2.3 From File on Disk
  • 6.3 Removing a Chromatogram from View
  • 6.4 Saving a Chromatogram to Disk
  • 6.5 Graph Functions
    • 6.5.1 Editing the Chromatogram Graph
    • 6.5.2 Changing Cursor Size
    • 6.5.3 Printing the Chromatogram
  • 6.6 Chromatogram Functions
    • 6.6.1 Editing the Chromatogram
    • 6.6.2 Editing TEVs from CGM Viewer
    • 6.6.3 Editing Retention Times from CGM Viewer
    • 6.6.4 Editing TEVs from Cursor
    • 6.6.5 Viewing the Chromatogram Results
    • 6.6.6 Entering a Description
    • 6.6.7 Forcing a Calibration
    • 6.6.8 Toggling TEVs and CGM Components
  • 6.7 Viewing Baseline Data
  • 6.8 Viewing RAW Data
  • 6.9 Display Options
• Reports
  • 7.1 Report Display
    • 7.1.1 View Report from Live Data
    • 7.1.2 View Report from File
    • 7.1.3 Print Report
    • 7.1.4 Save Report to Disk
    • 7.1.5 Report Contents
      • Analysis Report
      • Raw Data Report
      • Calibration Report
      • Final Calibration Report
      • Average Reports
      • Sample 24-Hour Average Report
  • 7.2 GC Report Request
  • 7.3 GC Printer Control
  • 7.4 MON2000 Printer Control
  • 7.5 Archive Data
    • 7.5.1 View Data Model 500/Model 700
    • 7.5.2 Archive Export Data
    • 7.5.3 Reset
  • 7.6 Trend Data
    • 7.6.1 Trend Data Model 700/2350A GCs
    • 7.6.2 View Live Trend Online Model 700/2350A
    • 7.6.3 View Trend from File on Disk
    • 7.6.4 Edit Graph Display
    • 7.6.5 Changing Cursor Size
    • 7.6.6 Describe Trend
    • 7.6.7 Print Trend
    • 7.6.8 Save Trend
    • 7.6.9 Read Trend Archive
    • 7.6.10 Display Options
• Logs
  • 8.1 Maintenance Log
  • 8.2 Parameter List
  • 8.3 Alarm Log
  • 8.4 Clear or Acknowledge Active Alarms
  • 8.5 Event Log
• MON2000 Plus Data Collection/Auto-Polling
  • 9.1 Overview
  • 9.2 Data Collection Configuration
    • 9.2.1 Create a New Polling Control File
    • 9.2.2 Open an Existing Polling Control File
    • 9.2.3 Await Command
    • 9.2.4 Connect/Logon Command
    • 9.2.5 Connect/No Logon Command
    • 9.2.6 Delay (Seconds) Command
    • 9.2.7 Delay (Hours) Command
    • 9.2.8 Disconnect Command
    • 9.2.9 End Command
    • 9.2.10 Poll Command: Alarms
    • 9.2.11 Poll Command: Averages
    • 9.2.12 Poll Command: CGM Archive
    • 9.2.13 Poll Command: CGM on Alarm
    • 9.2.14 Poll Command: Condition Start
    • 9.2.15 Poll Command: Condition End
    • 9.2.16 Poll Command: Event Log
    • 9.2.17 Poll Command: Maintenance Log
    • 9.2.18 Poll Command: Registers
    • 9.2.19 Poll Command: Reports
    • 9.2.20 Repeat Command
    • 9.2.21 Run Command
  • 9.3 Data Collection
    • 9.3.1 Start Auto-Sequencing
    • 9.3.2 Transaction Log
    • 9.3.3 Auto-Sequencing Status
    • 9.3.4 Status Log
• Modbus Test
  • 10.1 Starting WinMB
  • 10.2 Establishing Communications
    • 10.2.1 Comparison of Modbus Protocols
    • 10.2.2 Set GC Com Parameters via MON2000
    • 10.2.3 Set Up Port via WinMB
  • 10.3 Getting Modbus Data
    • 10.3.1 Use Single Data Type
    • 10.3.2 Use Template (Mixed Data Types)
  • 10.4 Using Modbus Data
    • 10.4.1 Set Log Parameters
    • 10.4.2 Save Modbus Data
    • 10.4.3 Assign Scale Ranges for User_Modbus
    • 10.4.4 Print Modbus Data
  • 10.5 Troubleshooting Communication Errors
  • 10.6 Using Modbus Test Online Help
    • 10.6.1 How to Access
    • 10.6.2 How to Navigate
• Appendix A, PC Config Report
  • A.1 How to Print
  • A.2 Example Report
• Appendix B: Component Data Table
• Appendix C, Data Computations
  • C.1 Data Acquisition
  • C.2 Peak Detection
  • C.3 Analysis Computations
    • C.3.1 Conc. Analysis with Response Factor
      • Calibration
      • Calc. in Mole Percent w/o Normalization
  • C.4 Post Analysis Computations
    • C.4.1 Liquid Equivalent Computations
    • C.4.2 Heating Value Calculations
    • C.4.3 Multi-Level Calibration
    • C.4.4 Indirect Calibration
• Appendix D, Analog Output Cal. For 2350A
  • D.1 Calibrating by Volts
  • D.2 Calibrating by Percentages
• Appendix E, Upgrade 2350A GC S/W and 2350 EPROMS
  • E.1 Connect to GC and Halt Analysis
  • E.2 Offline Edit to Upload App. & Rename
  • E.3 Upgrade User-Defined Applications
  • E.4 Upgrade from Disk
    • E.4.1 Upgrade from GC Controller
    • E.4.2 Configure GC Connection
  • E.5 Disconnect Power and Disassemble
  • E.6 Replace EPROMS/Reset CPU
  • E.7 Reassembly Procedures
  • E.8 Set-Up and Programming
    • E.8.1 Procedure
    • E.8.2 Reprogramming the DiskOnChip
    • E.8.3 GC Reassembly
  • E.9 Connect to GC for Upgraded App.
  • E.10 Guide to Standard Application Files
    • E.10.1 Importance of Standard Application Files
    • E.10.2 Standard Applications v1.50 and Later
    • E.10.3 Standard Applications Prior to v1.50
• Appendix F, Modbus Reg. List for 2350A GC
  • F.1 Introduction - SIM_2251 & User_Modbus
    • F.1.1 Notes on User_Modbus
    • F.1.2 Notes on SIM_2251 Modbus
  • F.2 User_Modbus Register List
    • F.2.1 SIM_2251 Modbus Register List