Emerson Radio ER100112 SmartSet clock radio 1.4inch Blue LED with Bluetooth, LED Decor & USB charging User Manual ER100112 IB R1 3 2018 10 18

Emerson Radio Corp. SmartSet clock radio 1.4inch Blue LED with Bluetooth, LED Decor & USB charging ER100112 IB R1 3 2018 10 18

User Manual

Download: Emerson Radio ER100112 SmartSet clock radio 1.4inch Blue LED with Bluetooth, LED Decor & USB charging User Manual ER100112 IB R1 3 2018 10 18
Mirror Download [FCC.gov]Emerson Radio ER100112 SmartSet clock radio 1.4inch Blue LED with Bluetooth, LED Decor & USB charging User Manual ER100112 IB R1 3 2018 10 18
Document ID4096682
Application ID4LiN9OXztH84hk06ZOJxhA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize344.67kB (4308377 bits)
Date Submitted2018-12-05 00:00:00
Date Available2018-12-05 00:00:00
Creation Date2018-10-18 12:20:45
Producing SoftwareCorel PDF Engine Version 18.0.0.448
Document Lastmod2018-12-05 17:19:19
Document TitleER100112-IB-R1.3-2018-10-18.cdr
Document CreatorCorelDRAW X8
Document Author: Administrator

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
ATTENTION: Pour éviter tout danger de choc électrique, ne pas raccorder au secteur tant que la
grille n'apas été remise en place.
* Les marquages sont inscrits en bas de l'appareil. Les précautions d'emploi sont inscrites en bas
de l'appareil.
La prise du secteur ne doit pas ētre obstruée ou doit ētre facilement accessible pendant son
utilisation.
Pour étre complètement déconnecté de l'alimentation d'entrée, la prise doit ētre débranchée du
secteur.
Les piles ne doivent pas ētre exposées à de forte chaleur, tel qu'á la lumière du soleil, au feu ou
autres choses de semblable.
La prise du secteur est utilisé pour déconnecter le système.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son
utilisation.
Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du
secteur.
L’adaptateur AC/AC de l’appareil est utilisé pour déconnecter le système.
L’adaptateur AC/AC de l’appareil ne doit pas être obstrué ou doit être facilement accessible
pendant son utilisation.
Pour être complètement déconnecté de l’alimentation d’entrée, l’adaptateur AC/AC de l’appareil
doit être déconnecté du secteur.
Setting the Time Zone
Pressandhold TIME ZONE
Press
4 Blue
▲/ MEM.
CLOCK
SET
SLEEP
VOL
TIME ZONE
AL2
DIMMER
AL1
LED
POWER
Stereo Earphone Out, LED Decor
SNOOZE/
WARNING
Do not ingest the battery,Chemical Burn Hazard
This product contains a coin/button cell battery.
If the coin/button is swallowed,it can cause severe internal burns
in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,stop using the
product and keep it away from children.
If you think batteries might have been swallowed or placed inside
any part of the body,seek immediate medical attention.
Shuttle Wheel
/ STO.
Standby
Clock
the Clock
Checking the Current Year/Date/Time
Package Contents
To check the current year/date/time,press the "CLOCK SET" button
repeatedly to see the cycle of year, month and date display.
Read This Insert
ER100112
ER100112
▲
(Quick Start Guide)
CLOCK
YEAR
Display
®
▲/ MEM.
“
”
“D
CLOCK
SET
”
“U ”
SLEEP
VOL
TIME ZONE
AL2
DIMMER
®
AL1
LED
POWER
SNOOZE/
▲
MONTH.DATE
Display
/ STO .
HOUR:MINUTE
TIMEDisplay
WARNING
TO PREVENT ELECTRIC SHOCK HAZARD, DO NOT CONNECT TO MAINS
POWER SUPPLY WHILE GRILLE IS REMOVED.TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
POUR ÉVITER TOUT DANGER DE CHOC ÉLECTRIQUE, NE PAS
RACCORDER AU SECTEUR TANT QUE LA GRILLE N'APAS ÉTÉ REMISE
EN PLACE.POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE CHOC
ÉLECTRIQUE, NE PAS EXPOSER CET APPAREIL SOUS LA PLUIE
ET L’HUMIDITÉ.
CLOCK
▲/ MEM.
CLOCK
SET
SLEEP
VOL
TIME ZONE
AL2
AL1
DIMMER
LED
POWER
SNOOZE/
▲
/ STO .
11
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to
alert the user to the presence
of uninsulated 'dangerous voltage'
within the product's enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOOK DO NOT REMOVE
COVER (OR BACK),NO USER SERVICEABLE
PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
AVIS:RISQUE DE CHOC
E L E C T R I Q U E - N E PA S O U V R I R
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying the appliance.
Les marquages sont inscrits en arrière de l'appareil. Les précautions d'emploi sont inscrites en arrière de l'appareil.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
7.) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8.) Only use attachments / accessories specified by the manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.)Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
11.)Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
12.)The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on apparatus.
l'appareil ne doit pas être exposé à des égouttements d'eau ou des éclaboussures et de plus
qu'aucun objet rempli de liquide tel que des vases ne doit être placé sur l'appareil.
13.) Mains plug is used as disconnect device and it should remain readily operable during intended
use. In order to disconnect the apparatus from the mains completely, the mains plug should be
disconnected from the mains socket outlet completely.
La prise secteur est utilisée comme dispositif de déconnexion et devrait rester facilement
utilisable pendant l'utilisation prévue. Afin de déconnecter l'appareil decomplètement le secteur,
la prise secteur doit être déconnectée duprise de courant complètement.
14.) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
les batteries (bloc de batteries ou batteries installées) ne doivent pas être exposées à une
chaleur excessive telle que celle du soleil, d'un feu ou d'origine similaire.
FCC Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: The Grantee is not responsible for any Changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC's RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna(s) must not be co-located or
conjunction with any other antenna or transmitter.
Thank you for purchasing this Emerson SmartSet® Dual Alarm Clock Radio.
This clock radio uses Emerson's patented SmartSet® Automatic Time Setting
System. The first time you connect this clock radio to your AC outlet, and
after every power interruption, within seconds the clock will automatically
set itself t o t h e c o r r e c t Ye a r, M o n t h , D a t e , D a y, a n d Ti m e . I n a d d i t i o n a l l
c h a n g e s from Standard Time to Daylight Saving Time, and back to Standard
Time, are made automatically.There are dual alarms that can be set and used
independently, and both of the alarms can be programmed for everyday
operation, weekdays only, or weekends only.There is a long life lithium battery
installed in this clock radio when you buy it.This battery can maintain the time and
alarm settings for 2 to 3 years, or even longer.We have taken every precaution to
make sure this radio was in perfect working order when it left our factory.
If you encounter any problems with the set up or operation of this item, please
call the Emerson Consumer Products Corp.,Customer Service Hotline, toll free,
at 1 -800-898-9020.
▲/ MEM.
SLEEP
VOL
CLOCK
SET
TIME ZONE
AL1
10
DIMMER
AL2
LED
POWER
▲
SNOOZE/
Press and hold the “CLOCK SET” button, until the “YEAR” display flashes.
year.
Press the “CLOCK SET” button again, the “MONTH” display flashes.
Press “▼”or “ ”to adjust the month.
Press the “CLOCK SET” button again, the “DATE” display flashes.
Press “▼”or “ ”to adjust the date.
Press the “CLOCK SET” button again,the “HOUR” display flashes.
/ / STO.
14
PHONE OUT
5V 1A
USB CHAR.
10
11
ALARM 1 RADIO/Buzzer Indicators
AM Indicator('On'=AM, 'Off'=PM)
DAY of WEEK Indicator
MHZ Indicator(FM Radio frequency)
BT Indicator('Solid'=Bluetooth connected)
ALARM 2 RADIO/Buzzer Indicators
CLOCK SET Button
AL2 ON/OFF/SET Button
AL1 ON/OFF/SET Button
POWER( ' ON ' /Standby) Button
Shuttle Wheel Volume Control
(clockwise'+'/counterclockwise'-')
TUNE/ TUNE+ Button
UP/DOWN/STORE/MEMORY
Button
LED Button
DIMMER Button
SLEEP/TIME ZONE Button
SOURCE Button
Stereo Earphone Jack
Adapter Cable
(acts as Antenna)
AC Adapter
USB CHARGING Port
Backup Battery
Compartment
Press “▼”or “ ”to adjust the hour.
Press the “CLOCK SET” button again, the “MINUTE” display flashes.
Press “▼”or “ ”to adjust the minute.
Press the “CLOCK SET” button again to return to clock mode, or wait for 5
seconds.
9
14
19
4-
(Checking and setting Alarms can be in Standby mode or
while Bluetooth/Radio mode is On)
AL1and AL2
Bluetooth or Radio
▲/ MEM.
CLOCK
SET
SLEEP
VOL
TIME ZONE
AL2
DIMMER
AL1
LED
POWER
mode
mode
SNOOZE/
▲
▲/ MEM.
/ STO .
CLOCK
SET
SLEEP
VOL
TIME ZONE
AL2
Three Alarm Week Modes:
· Everyday-If all the 7 indicators are On,
the alarm will turn on everyday.
· Weekdays only-If only the MON to FRI
indicators are On, the alarm will turn on
Monday through Friday.
·Weekends only-If only the SAT and SUN
indicators are On, the alarm will turn on
Saturday and Sunday.
AL1
SNOOZE/
▲
/ STO.
or at http://www.emersonradio.com/
service/return-policy.
press 2s and store station
▲/ MEM.
▲/ MEM.
SLEEP
VOL
CLOCK
SET
TIME ZONE
SLEEP
VOL
TIME ZONE
15
AL2
AL2
DIMMER
AL1
LED
POWER
press 2s and release
CLOCK
SET
DIMMER
AL1
LED
POWER
SNOOZE/
▲
DIMMER
LED
POWER
SNOOZE/
/ STO .
▲
/ STO .
10
▲/ MEM.
CLOCK
SET
SLEEP
VOL
TIME ZONE
AL2
AL1
DIMMER
button
LED
POWER
SNOOZE/
▲
“STO.” button
/ STO .
from
Checking the Alarm Settings (Wake Up Time and Alarm Week Mode)
Press the “AL1” or “AL2” button to check the current alarm settings for Alarm 1
or Alarm 2 respectively.
Default alarm settings are 8:00AM on Everyday week mode.
▲/ MEM.
CLOCK
TIME ZONE
DIMMER
AL1
LED
POWER
Changing the Alarm Settings (Wake Up Time, Alarm Volume and
Alarm Week Mode)
Press and hold the “AL1/AL2” button for 2 seconds until the “Hour" of wake up
time flashes. Then,
Press the“▼” or “▲” button to adjust the Hour.
Press the“AL1/AL2”button once,the “Minutes” of wake up time will flash.
Press the“▼” or “▲” button to adjust the Minutes.
Press the“ AL1/AL2”button once,the current volume level will flash.
Press the“▼” or “▲” button to adjust your desired alarm volume level(V01-V15)
at which the alarm will reach gradually at wake up time.
Press the “SOURCE” button to select the desired Alarm Week Mode
(Everyday, Weekdays, Weekends).
10 Press the“AL1/AL2” button to save your alarm settings and return to
current time display.
Note: The alarm will sound continuously for up to one hour if it is not canceled.
16 Enjoying Stereo via Earphone Jack
SLEEP
VOL
SET
AL2
SNOOZE/
▲
/ STO .
PHONE OUT
“MEM.”
“
”
“
”
AC Adapter cable, which functions as an FM antenna.
Press the “POWER” button to turn the unit On.
2 Press the “SOURCE” button to select and listen to your desired audio
source (Bluetooth or Radio).
Adjust the output volume by turning the Shuttle Wheel in clockwise or
counterclockwise direction.
Connect your headphone plug into the 3.5mm earphone jack to enjoy
streaming stereo through your headphone.
Note: If an alarm is set and your headphone is still connected to the unit,
Wake to Radio/Buzzer alarm will not go off on the speaker but only on your
headphone.
CAUTION: Prolonged use of headphone at high volume may cause irreparable
hearing loss. We strongly advise you to adjust the headphone volume to a
reasonable level. The higher the volume for a prolonged time, the higher the
risk of damaging your hearing.
12
Activating the Alarm
· Press and release the “AL1/AL2” button continuously to turn On your desired
Alarm Mode: Wake to Radio or Wake to Buzzer.
· When the `1♫/2♫' indicator glows, the wake up to Radio alarm will be On.
· When the `1 /2 ' indicator glows, the wake up to Buzzer alarm will be On.
· To completely turn Off the alarm, press and release “AL1/AL2” button
continuously until the Radio `1♫/2♫' indicator or the Buzzer `1 /2 ' indicator
is Off.
“SOURCE”
If pairing successful,
Snooze Alarm
When the alarm comes On, press the “SNOOZE” button to pause it for 9
minutes. Alarm indicator will flash during Snooze Alarm mode. To turn off
Snooze Alarm, press the “POWER” button once.
Note:If not turned off, the Snooze Alarm will only be active for one hour.
17
▲/ MEM.
CLOCK
SLEEP
VOL
SET
TIME ZONE
ER100112
AL2
AL1
10
5V 1A
USB CHAR.
Bedroom/Desk LED Decor
DIMMER
LED
POWER
SNOOZE/
▲
/ STO.
Press the button indicated to turn the blue LED On to decorate your
bedroom or desk. To turn it Off, press the same button once
▲/ MEM.
CLOCK
SLEEP
VOL
SET
Note: If pairing unsuccessful, all previously paired Bluetooth devices around
should be disconnected or turned off first, in order to avoid making any auto
reconnection between them. Then, set this unit to Bluetooth mode, and tap the
Bluetooth switch on your phone/device off and back on again to refresh/search
any nearby `ER100112' for pairing.
TIME ZONE
AL2
AL1
DIMMER
LED
POWER
SNOOZE/
▲
/ STO.
13
11
The lithium backup battery needs replacement when the LOW BATTERY
indicator flashes, otherwise, the time and alarm settings will be lost/reset
after a power outage.
Leave the AC adapter connected to your AC outlet to retain memory while
the original battery is removed.
Unscrew the battery holder from the cabinet with a small screwdriver and
insert a new battery with the same CR2032 or equivalent type into the
holder the same way, observing the positive (+) polarity before sliding the
holder back into the slot. The LOW BATTERY indicator should then be Off.
ER100112-20181008-01
the SOURCE”
18
Press the "POWER" button
to turn On the unit.
Press the Tune Up or Tune Down button
to search and tune in your desired station.
TIME ZONE
TIME ZONE
LED
POWER
▲
/ STO .
AL2
AL1
DIMMER
LED
POWER
SNOOZE/
▲
/ STO .
▲/ MEM.
CLOCK
SLEEP
VOL
SET
AL2
SLEEP
VOL
DIMMER
SNOOZE/
TIME ZONE
CLOCK
SET
AL1
SLEEP
VOL
TIME ZONE
DIMMER
AL2
AL1
SLEEP
VOL
AL2
▲/ MEM.
CLOCK
SET
▲/ MEM.
▲/ MEM.
CLOCK
SET
DIMMER
LED
POWER
SNOOZE/
▲
/ STO .
AL1
LED
POWER
SNOOZE/
▲
/ STO .
briefly
Press the "SOURCE" button
to switch to Radio mode.
To adjust the output volume, turn the
Shuttle Wheel in clockwise (VOL+) or
counterclockwise (VOL-) direction.
35 Waterview Blvd
Parsippany, NJ 07054
Press the “SLEEP” button to choose your desired sleep timer (10~90 minutes or
OFF).
To displ

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:10:18 12:20:45+08:00
Modify Date                     : 2018:12:05 17:19:19+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Administrator
Title                           : ER100112-IB-R1.3-2018-10-18.cdr
Creator Tool                    : CorelDRAW X8
Metadata Date                   : 2018:12:05 17:19:19+08:00
Producer                        : Corel PDF Engine Version 18.0.0.448
Document ID                     : uuid:6d841bdd-e2ae-404e-8c3b-43728fb7af23
Instance ID                     : uuid:cfb11c40-dec4-4c6f-b83e-ea33b2dd549d
Page Count                      : 2
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ALCVER100112

Navigation menu