Emerson 2000Iw Iw Brochure

: Emerson Emerson-2000Iw-Iw-Brochure-679714 emerson-2000iw-iw-brochure-679714 emerson pdf

Open the PDF directly: View PDF .
Page Count: 6

2000IW/IW+

WELDING l STAKING l INSERTION l SWAGING l FORMING l SPOT WELDING l DEGATING l CUTTING AND SEALING

Ultrasonic Assembly Systems

2000 Series Integrated Ultrasonic Plastic Welders

IW/IW+ – 1100, 2200 & 3300 Watts

Key Features

• Line / Load Regulation - corrects for variations due to power line

fluctuations and varying load conditions through Branson’s proprietary

closed-loop amplitude control. Output amplitude is maintained with a

variation of only + 2% with line voltage fluctuations of +10%, regardless

of load. It ensures constant power in welding and provides greater weld

consistency and reliability.

• 2000 Series 20 kHz converter - produces 20% higher output amplitude than its 900 Series predecessor for

faster weld cycles; in addition, this converter is more rugged and has higher power capacity.

• Auto Seek - automatically measures stack frequency and stores it in memory. Three selectable Auto Seek

choices are available:

1. On power up, setting memory for the initial weld.

2. Depressing “test” switch.

3. By once/minute timer to track heating, cooling, and other effects.

• Operating modes - IW models feature welding in time; ultrasonics and force are applied to parts for a precise,

preset time, and parts are held under force for a precise hold time; adjustable afterburst delay and duration

times may be set, if required. Display of time and afterburst parameters is digital. IW+ models give choice of

time or distance modes (either absolute or collapse). In absolute, the weld

2000 Series Integrated

Ultrasonic Plastic

Welders IW/

IW+ – 1100, 2200 & 3300 Watts

Branson’s 2000 Series Integrated Welders are self-contained ultrasonic

plastics assembly systems that combine a power supply module, process

controls, and welding stand in a compact bench unit to conserve work

space, ease setup, simplify operation, facilitate relocation, and make

service convenient. The integrated welder is the ideal “entry level”

system for new users of ultrasonic technology and those with lower

production requirements. Available with power output of 1100, 2200

or 3300 watts, the integrated welder Models IW and IW+ feature digital

controls for accurate and repeatable setups. In addition, the IW+ models

enable distance welding in either collapse or absolute modes with limits.

When using the welder, the assembly operation is characterized by

simplicity, speed, and efficiency. Once the system is programmed for

a particular workpiece, no further adjustments are required.

• Line Regulation

• Load Regulation

• Auto Seek with Memory

• High Amplitude Converter

is terminated at a predetermined point in the stroke, measured from the

top of the stroke. In collapse, the weld is terminated at a predetermined

point in the stroke after the horn contacts the part and the trigger switch is

activated. The position display is digital. With position modes, upper and

lower limit ranges may be selected.

• Digital parameter entry with autoranging - when entering parameters

gives precise settings for repeatable accuracy. The autoranged values enable

fine resolution and setup accuracy.

• A linear optical encoder - (IW+ models only) measures weld “distance.”

The resolution on the encoder is 0.0001 inch (0.0025 mm).

• Afterburst with variable delay and duration - is available to dislodge a part

or material adhering to the horn face.

• Individual select keys - allow easy selection of parameters to be modified.

Active choice is lighted.

• Sequence of operation - is displayed in the digital LED window during the

welding cycle.

• Self-diagnostics and cycle monitoring - features and capabilities provide

fast, accurate troubleshooting and minimize downtime. During initial power-

up, the unit completes a self-check and identifies any fault conditions or

parameter errors before indicating that the system is “ready” for operation.

• Visual and audible alarms, and external outputs - identify overload,

machine faults and setup errors (e.g., emergency stop engaged).

• Fast-response LED storage meter - displays power loading in 5% incre-

ments, and provides storage of the peak power achieved during the weld

cycle as well as better visibility; 100% of rated output of the power supply

is delivered at full meter reading.

• Peak power reading - from the last welding cycle is available on the digital

LED display by depressing the “reset” switch. Similarly, power in the tuning

mode is digitally displayed when the “test” switch is depressed.

• LED readouts display parameter settings - during setup and operation

for easy reference and monitoring. LEDs are large and easy to read in most

light conditions.

• Lockout of front panel switches - is provided by and internal dip switch,

preventing unauthorized parameter changes to the setup.

• Nonvolatile storage of cycle parameters - provides storage of last-used

cycle parameters even if the system is shut off or a power interruption occurs.

2000 Series

Equipment

Standard

Features

• Autotune plus Memory (AT/M) -

Provides fully-automatic tuning in a

range of + 500 Hz centered around

19.950 kHz for 20 kHz horns and

stores horn frequency at the end of

each weld cycle.

• System Protection Monitor (SPM) -

Five levels of power supply protection

are provided: 1) phasing, 2) over volt-

age, 3) over current, 4) over tempera-

ture, and 5) power. The benefits of

this feature are to avoid equipment

failures and to provide greater weld

accuracy and repeatability.

• Automatic pretriggering - is avail-

able to provide pretriggering without

a mechanical switch to wear, adjust,

or fail.

• Dynamic Triggering - provides con-

sistent weld quality by initiating (trig-

gering) ultrasonic vibrations after a

preset force, ranging from 15-200 lbs.

(67 - 890 N), is applied to the part.

As melting of the plastic occurs,

dynamic follow-through ensures the

smooth, efficient transmission of ultra-

sonic energy into the part by maintain-

ing horn/part contact and force. The

range of dynamic follow-through is

from 15 - 200 lbs. (67 N to 890 N). The

Dynamic Trigger mechanism of the

2000 Series includes a 48 position con-

trol dial for greater accuracy and con-

product name2000IW/IW+

trol, and a self-contained optical

switch for accurate repeatability and

long-term reliability.

• Rugged construction and durabil-

ity - Rigidity and consistent, precise

alignment of the horn and parts

during welding is provided by linear

ball bearing slides. The slide system

incorporates a rail in linear motion

guides with four sets of preloaded,

permanently pre-lubricated bear-

ings. This design ensures long-term

reliability (less wear, less binding)

and allows smooth linear motion

and well-balanced stiffness against

loads applied from any direction.

(For applications involving severe

side loading, check with Branson

before operation.) Preload is built

into the bearings and does not

depend on actuator assembly. The

1100-Watt model has a 2.5” cylin-

der, and the 2200 and 3300-Watt

model has a 3” cylinder.

• Ease of setup and changeover -

The converter/booster/horn stack

is easily installed and removed from

the front of the carriage assembly

without repositioning the actuator.

The stack may be rotated a full

360° in the carriage for horn align-

ment with the workpiece.

• Versatility - 2000 Series Integrated

Welders are capable of welding,

staking, inserting, swaging, spot

welding, and degating thermoplas-

tics and can also seal synthetic

fabrics, films, and other thin ther-

moplastic materials. A 4” stroke

(102 mm) accommodates parts

with deep cavities. The welding

head can be rotated on the column;

height is adjusted by turning a

handwheel on the side of the unit.

The system is compatible with

automated systems and most

material handling devices.

• Adjustable 20 threads-per-inch

locking mechanical stop - with an

adjustment knob. When properly

set, the stop prevents the horn

from touching the fixture or nest

when no workpiece is in place.

• Upper limit switch - causes the

power supply to produce a “ready”

signal when the carriage has fully

retracted. The ready signal is used

as a safety interlock switch on

automated systems to prevent the

movement of material handling

equipment (indexing) when the

horn is down or the welder is in error.

An optical switch is used to provide

reliable, wear-free operation.

• Stroke indicator - allows quick

identification of the operating

stroke length.

• Convenient Pneumatic Controls

• Flush-mounted 2” diameter

pressure gauge - provides

excellent visibility for ease of

setup; calibration is in both USCS

(English) and metric (SI) units.

• High-precision regulator - pro-

vides accuracy and repeatability.

Included is a locking feature—

pull to set, push to lock—that

enables consistency of operation

once the unit is set up.

• Calibrated flow control valve -

for downspeed gives accuracy,

consistency and repeatability

machine to machine. A locking

mechanism is built in.

• “Horn down” key - on front

panel facilitates setup allowing

alignment of the horn with parts

during setup without activating

ultrasonics.

• Base with ergonomic low-force

palm button - built-in emergency

stop button. Mounting holes pro-

vided for attaching welder to work

bench. Bolt holes for fixture mount-

ing have M10 x1.5 metric threads.

An optional self-leveling fixture

plate for use with Branson Ergo base

speeds setup and simplifies change-

over of tooling. For automation or

close mounting of welders, an

optional mounting hub is available.

• Molded thermoplastic structural

foam housing (Noryl

®

) - all internal

electronic components are enclosed

in a housing that is durable, com-

pact, lightweight, non-conducting,

and non-corrosive; single door

access is provided to most internal

components.

Electrical Specifications

Automation

Interfacing

Branson’s 2000 Series Integrated

Welders can be interfaced with

external devices and controls (e.g.,

PLCs). This will require both a J971

alarm cable and a J911 start cable

(optional). A user I/O is built in.

• Select faults or weld errors

sensed by the system can be

communicated - outside the

welder for monitoring and sorting

suspect parts. Front panel or

external reset access is provided.

• General alarm and weld on out-

puts - are available for customer

access through 24V DC negative

logic devices. The ready signal

is both a 24V DC and isolated

contact closure.

• External reset - is available for

customer access as a 24V DC input.

A w source is provided by the

welder.

Power requirements: 1100 Watts* 2200 Watts 3300 Watts

Line voltage: 100-120V AC 200-240V AC 200-240V AC

50/60 Hz, 1Ø 50/60 Hz, 1Ø 50/60 Hz, 1Ø

Input current: 13 amps 14 amps 20 amps

Electrical connection:

100-120V models: NEMA 5-15P plug provided; requires NEMA 5-15R receptacle

200-240V models: Supplied by user

Output power: 1100 watts* 2200 watts 3300 watts

Frequency: 20 kHz 20 kHz 20kHz

Parameter ranges: Range** Increment/step

Weld & hold time range: 50-1,000 1 millisecond

milliseconds (1 sec.)

1-10 seconds 10 milliseconds

Afterburst delay and duration: “Off ” or 50-1,000 1 millisecond

milliseconds (1 sec.)

1-10 seconds 10 milliseconds

Position (IW+ only): 0.0001”- 4.0” Slow up/down key: 0.0001”(0.0025 mm)

(0.0025 - 101.6 mm) Fast up/down key: 0.01”(0.25 mm)

Ambient temperature - The following signals are available:

Ready signal 41-122° F (5-50° C) Both 24V DC and dry (clean) contact

closure available

General alarm 24V DC, negative logic

Weld on 25 mA max.

External reset +24V DC, 25 mA max.

*Note: 1100-Watt model also available in 200-240 V; contact Branson, Danbury, for information.

** Note: With autoranging, the power supply will automatically display settings in the next range with the

appropriate increments when the extremes of a range are reached.

Mechanical Specifications

Pneumatic requirement:

Clean (5 micron, filtered), dry, non-lubricated air at 100 psi

(690 kPa)

Maximum force on part: 1100W models: 440 lbs. at 100 psig (1.96 kN at 690 kPa)(2.5” cyl.);

2200W models: 630 lbs. at 100 psig (2.8 kN at 690 kPa)(3” cyl.);

3300W models: 630 lbs. at 100 psig (2.8 kN at 690 kPa)(3” cyl.)

Dynamic Triggering range: 15-200 lbs. (67-890 N) max.

Dynamic Follow-through range: 15-200 lbs. (67-890 N) max.

Stroke length: 4” (102 mm)

Cycle rate: IW = 90 CPM, IW+ = 65 CPM at 1” stroke length, 50 psig (345 kPa),

50 ms weld, 50 ms hold

Weight: 145 lbs. (66 kg)

Base width and depth: 16.25” and 27.5”

product name

Ordering Information

Address Weoiosid wkeoijsdon

Address Weoiosid wkeoijsdon

Address Weoiosid wkeoijsdon

Notes bold 7.5pt

Notes 7.5pt Weoiosid wkeoijsdon csdkncwlejoic osijeofnkeoijsdon csdkn cwle joic osijeofn keoijsdon

csd kncwlejoic osijeofn keoijsdon csdkncw lejoic osijeofn keoijsdon csdkncwlejoic c osijeofnk eoijs

don csd kncwlejoic osijeofn keoijsdon csd kncwlejoic osijeofn keoijsdon .

Notes bold 7.5pt

Notes 7.5pt Weoiosid wkeoijsdon csdkncwlejoic osijeofnkeoijsdon csdkn cwle joic osijeofn keoijsdon

csd kncwlejoic osijeofn keoijsdon csdkncw lejoic osijeofn keoijsdon csdkncwlejoic c osijeofnk eoijs

don csd kncwlejoic osijeofn keoijsdon csd kncwlejoic osijeofn keoijsdon

csd kncwlejoic osij.

Copyright info 6pt Weoiosid wkeoijsdon csdkncwlejoic osijeofnkeoi-

jsdon csdkn cwle joic osijeofn keoijsdon csd kncwlejoic osijeofn keoi-

jsdon csdkncw lejoic osijeofn keoijsdon csdkncwlejoic c osijeofnk.

ISO CertificationsISO Certifications

2000IW © Branson Ultrasonics Corporation 2013

The Emerson logo is a trademark and service mark of Emerson

Electric Co. Revised and printed in the U.S.A. 1/13

All specifications subject to change without notice. All dimensions are nominal. All units comply

with FCC rules and regulations governing radio frequency interference.

Note: All sales shall be subject to the Supplier’s terms and conditions of sale as described in

Branson’s quotations and sales contracts.

Warranty: Branson 2000 Series Integrated Welders carry a three-year warranty on all parts

and workmanship. Note: this warranty applies to welders purchased and operated in the United

States, Canada, and Mexico. For warranty information on units purchased and/or operated

outside North America, contact your local representative.

Branson Ultrasonics Corporation

41 Eagle Road, Danbury, CT 06813-1961

(203) 796-0400 • Fax: (203) 796-9838

www.bransonultrasonics.com

e-mail: info@bransonultrasonics.com

2000IW/IW+

2000 Series Integrated Welders – on base; include converter and choice

of aluminum booster.

Branson EDP No.

Model 2000 IW, 1100 Watts, 100-120 V, 50/60 Hz 101-162-116

Model 2000 IW+, 1100 Watts, 100-120 V, 50/60 Hz 101-162-117

Model 2000 IW, 2200 Watts, 200-240 V, 50/60 Hz 101-162-118

Model 2000 IW+, 2200 Watts, 200-240 V, 50/60 Hz 101-162-115

Model 2000 IW, 1100 Watts, 200-240 V, 50/60 Hz (option) 101-162-120

Model 2000 IW+, 1100 Watts, 200-240 V, 50/60 Hz (option) 101-162-119

Model 2000 IW+, 3300 Watts, 200-240 V, 50/60 Hz (option) 159-162-128

Model 2000 IW+EN*, 1100 Watts, 200-240 V, 50/60 Hz 101-162-145

Model 2000 IW+EN*, 2200 Watts, 200-240 V, 50/60 Hz (option) 101-162-144

Model 2000 IW+EN*, 3300 Watts, 200-240 V, 50/60 Hz 159-162-143

1100 Watts: 2.5” cylinder; 2200 and 3300 Watts: 3” cylinder.

*CE Compliant

Other System Cables

Start Cable, J911 8’ 101-240-020

(Requires Product 15’ 101-240-015

Liability Agreement) 25’ 101-240-010

Alarm, J971 8’ 101-240-021

15’ 101-240-016

25’ 101-240-011

Optional Columns–Integrated welders include a

40” long column with 1/4” wall, standard. (Note:

longer columns should be factory installed.) Longer

columns will increase overall height.

Branson EDP No.

3.5” O.D., 4’ (1/2” wall)* 100-028-004

3.5” O.D., 5’ (1/2” wall)* 100-028-008

3.5” O.D., 6’ (1/2” wall)* 100-028-005

*Note: When ordering 1/2” wall columns, spacer EDP No.

100-094-107 is required and must also be ordered.

Options And Accessories

Ground detect kit (for IW only) 101-063-343

Self-leveling fixture plate for use with Branson Ergo

base, speeds setup and simplifies changeover of

tooling.

Hub - Used in automation with column in place of base assembly. 101-063-071

Converter (one included with welder) Model CJ20. 101-135-059

Boosters Horn End Drill And Tap

1/2-20 3/8-24*

Aluminum 1:0.6 (Purple) 101-149-055 101-149-090

1:1 (Green) 101-149-051 101-149-093

1:1.5 (Gold) 101-149-052 101-149-092

1:2 (Silver) 101-149-053 101-149-094

Titanium 1:0.6 (Purple) 101-149-060 —

1:1 (Green) 101-149-056 —

1:1.5 (Gold) 101-149-057 —

1:2 (Silver) ) 101-149-058 —

1:2.5 (Black) 101-149-059 101-149-091

*IMPORTANT: Use with 1100-Watt models only. With 2200-Watt models, use 1/2-20 boosters

(preferred for all units).

USCS (inch) model 101-063-358

Metric model 101-063-444