Emerson Dcm Modular Data Center Racks And Enclosures Brochures Sheets

2015-03-30

: Emerson Emerson-Dcm-Modular-Data-Center-Racks-And-Enclosures-Brochures-And-Data-Sheets-680413 emerson-dcm-modular-data-center-racks-and-enclosures-brochures-and-data-sheets-680413 emerson pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

Integrated Cabinet Solutions
For Business-Critical Continuity™
DCM™ Modular Racks from Emerson Network Power
Specically Designed To Support Cisco® 7000 Series Switches
The Flexible Rack Solution For Cisco® Nexus™ Switches
DCM™ modular racks from Emerson Network Power
are available in congurations specically designed to
meet size, airow and cable management requirements
for Cisco Nexus 7010 and 7018 Switches. Precongured
solutions are available in 42U, 45U and 52U heights,
providing choices for most applications.
DCM racks provide better airow management for these
Cisco switches, through 83% perforated front and rear
doors and integrated airow bafe system. Pre-installed
cable management features allow for proper cable
management, resulting in further airow improvements.
Lift-off hinges, reversible doors and innitely adjustable
rails ensure exibility and convenience for equipment
additions and changes.
Key Features
Flexibility:
Full height vertical cable managers provide integral
bend radius control and align with “U” markings for
simplied cable management.
Two full height PDU mounting brackets allow for easy
PDU installation or additional rear cable management.
Additional cable management accessories:
tool-less lobster claws and Velcro straps, front
to rear cable troughs.
Higher Availability:
Integrated bafe system to allow for proper airow
of side breathing equipment in hot aisle/cold aisle
settings, and allow for front to rear cable pass-through.
Additional airow management accessories include
1U and 2U tool-less blanking panels.
Lowest Total Cost of Ownership
Pre-congured with cable management and airow
bafes, reducing overall installation time.
Reduces costs and lead times with
standardized components.
DCM rack for Cisco
Nexus 7010
Front-to-back airow is
optimized through 83%
perforated doors, vertical
airow bafes, and use
of blanking panels.
DCM rack for Cisco
Nexus 7018
Airow for these side-
breathing switches is
accomplished through
83% perforated doors,
integrated bafes, and
use of blanking panels.
2
Full Height Vertical cable align with “U”
markings - Two full height PDU mounting
brackets that allow for easy PDU installation
or additional rear cable managing
Full Height Vertical cable align with “U”
markings - Two full height PDU mounting
brackets that allow for easy PDU installation
or additional rear cable managing
Height: 42U, 45U or 52U
Height: 42U or 45U
Width: 39.3” (1000mm)
Width: 31.5” (800mm)
Top or bottom cable entry capable
of handling 1540 cables
Top or bottom cable entry capable
of handling 1540 cables
83% perforated split
locking rear doors
83% perforated split
locking rear door
83% perforated split
locking front doors
83% perforated single locking
reversible front door
Depth: 47.24” (1200mm)
Depth: 47.24” (1200mm)
Rack for Nexus™ 7010:
Rack for Nexus 7018:
2 Pair Depth Adjustable 19” EIA
Rails, Pre-set for the 7018 switch
2 Pair Depth Adjustable 19” EIA
Rails, Pre-set for the 7010 switch
Integrated bafe system allows for
front to rear cable pass through
Vertical airow bafes allow for
front to rear cable pass through
Specifications
Racks for the Nexus™ 7010 Racks for the Nexus™ 7018
Height 42U or 45U 42U, 45U or 52U
Width Width: 31.5” (800mm) Width: 39.3” (1000mm)
Depth Depth: 47.24” (1200mm) Depth: 47.24” (1200mm)
Weight Capacity 3000 lb. 3000 lb.
Rails Two Pair Depth Adjustable 19” EIA Rails,
Pre-set for the 7010 switch
Two Pair Depth Adjustable 19” EIA Rails,
Pre-set for the 7018 switch
3
Emerson Network Power
Liebert Corporation World Headquarters
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
United States Of America
800 877 9222 Phone (U.S. & Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Contact@EmersonNetworkPower.com
Emerson Network Power
Caribbean and Latin America
Ofce – United States of America
+1-954-984-3452 Phone
Ask.Cala@Emerson.com
Emerson Network Power
European Headquarters
Ofce – Italy
+39 049 9719 111 Phone
+39 049 5841 257 FAX
Marketing.EMEA@EmersonNetworkPower.com
Emerson Network Power
Asia Pacific
Ofce – Phillipines
+63 2 687 6615
+63 2 730 9572 FAX
Marketing.AP@Emerson.com
liebert.com
24 x 7 Tech Support
800 222 5877 Phone
614 841 6755 (outside U.S.)
While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes no
responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
© 2012 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names and logos referred to herein are trade names, trademarks
or registered trademarks of their respective owners.
® Liebert is a registered trademark of the Liebert Corporation.
SL-11383 (R06/12) Printed in USA
Business-Critical Continuity, Emerson Network Power and the
Emerson Network Power logo are trademarks and service marks
of Emerson Electric Co.
©2012 Emerson Electric Co.
The global leader in enabling Business-Critical Continuity™.
Emerson Network Power. EmersonNetworkPower.com
AC Power Embedded Computing Infrastructure Management & Monitoring
Connectivity Embedded Power Outside Plant
DC Power Industrial Power Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
For Data Centers
with basic
distribution needs,
the Basic Rack PDU
delivers simple
and expandable
distribution in a
robust package.
The basic offering
from Knurr, is
available in a
family of products
ranging from 1.4-
24.4kW of output.
The Managed
Rack PDU offers
several levels
of metering
in addition
to control
capabilities
with connected
equipment.
This family offers
products ranging
from 1.9kW
to 8.6kW.
Liebert MPX:
This Adaptive
Rack PDU offers
breakthrough,
congurable/
modular power
and management
technology for
the dynamic
Data Center,
where change in
receptacle type
and/or voltage
may be foreseen
over the upcoming
years. This family
offers products
ranging from
1.9kW-14.4kw
of output.
Emerson Network Power Family of Rack Power
Distribution Units
DCM™ modular racks from Emerson Network Power are compatible with Liebert® MPX™
adaptive, Liebert MPH™ managed, and Knurr® DI-STRIP™ basic rack PDUs. These
PDUs offer choices of input phase, input/output ampacity and input/output voltage
to provide you with the best solution for the application you are facing today, or foresee
in the future.
Highest Standard Operating Temperature in the Industry:
Each rack PDU is rated for operation up to 55C/131F, delivering reliable performance
in hostile back-of-the-rack environments.
Broadest Offering of Rack PDU:
Basic to adaptive solutions to t any rack distribution needs.
Rugged Construction:
Engineered to be reliable and long lasting.
Liebert MPH: Knurr DI-STRIP:

Navigation menu