Emerson Fisher Baumann 84000 Data Sheet

: Emerson Emerson-Fisher-Baumann-84000-Data-Sheet-680831 emerson-fisher-baumann-84000-data-sheet-680831 emerson pdf

Open the PDF directly: View PDF .
Page Count: 12

129551

www.Fisher.com

Baumannt84000 Sanitary

Control Valves

The Baumann 84000 sanitary control valves are

designed to satisfy the stringent demands of the

pharmaceutical and biotechnology industries. These

valves are in compliance with 3A Sanitary Standards

Inc. requirements. Incorporating reliable class III

diaphragm technology, the 84000 valves can handle

temperatures up to 160_C(320_F). The uniquely

shaped diaphragm, unlike plug style sanitary valves,

results in low shear forces in the flow stream,

minimizing possible damage to delicate bio-media or

altering the consistency of end product.

Features

Electropolished internal surfaces

USP 24 Class VI PTFE, EPDM backed diaphragm

Designed for Clean-in-Place (CIP) and

Sanitize-in-Place (SIP) service

Self-draining in preferred mounting mode

Compact size, see figures 9 to 10 and tables 14 to

15

FDA approved epoxy powder-coated actuator with

stainless steel fasteners for maximum corrosion

resistance

Stainless steel spring case and yoke available

Multi-spring field-reversible actuators with reduced

deadband permits direct operation from remote

signal devices

FisherrFIELDVUEtdigital valve controller available

for remote calibration and diagnostics in facilities

utilizing the PlantWebtarchitecture

84000 Inline Sanitary Valve with Baumann 32 Actuator

W9838

84000 Angle Sanitary Valve with Baumann 32 Actuator

and FIELDVUE DVC2000 Digital Valve Controller

W9839

84000 Angle Sanitary Valve with Baumann 54 Actuator

and FIELDVUE DVC6000 Digital Valve Controller

W9840

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

2

Figure 1. Baumann 84000 NPS 1 Angle Valve Body

Sub-Assembly

E1314

Figure 2. Baumann 84000 NPS 1 Inline Valve Body

Sub-Assembly

E1315

Table 1. Materials of Construction for NPS 1 Angle and Inline Valves

Key

Number Description Material

1Valve Body ASTM A479 S31603 stainless steel, annealed

2Bonnet ASTM A479 S30400 Annealed

3Piston Stem Sub-assembly Stainless Steel

4Drive Mechanism Sub-assembly Multiple (predominantly stainless steel)

5Compressor S30300 or S30400 stainless steel

6Wave Spring S17700 stainless steel

7Retaining Ring S30200 stainless steel

8Diaphragm, Closure Member PTFE face with Aramid fabric reinforced EPDM backing and S30400 stainless steel insert.

Diaphragm assembly conforms to FDA 21CFR 177.1550 and USP24 Class VI standards.

9Drive Nut, Actuator Yoke S30400 stainless steel

11 Bonnet Flange ASTM A240 S30400 stainless steel

13 O-Ring, Stem FKM fluorocarbon

14 Tell Tale Port S31600 stainless steel

18 Hex Head Cap Screw Grade B8, Class 1

27 Locknuts S30400 stainless steel

58 Travel Indicator S30400 stainless steel

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

3

Figure 3. Baumann 84000 NPS 1-1/2 and 2 Angle

Valve Body Sub-Assembly

E1316

Figure 4. Baumann 84000 Linkage Mechanism

E1317

Table 2. Materials of Construction for NPS 1-1/2 and 2 Angle Valves

Key

Number Description Material

1Valve Body ASTM A479 S31603 stainless steel, annealed

2Bonnet ASTM A479 S30400 Annealed

3Piston Stem Sub-assembly Stainless Steel

4Drive Mechanism Sub-assembly Multiple (predominantly stainless steel)

5Compressor S30300 or S30400 stainless steel

6Wave Spring S17700 stainless steel

7Retaining Ring S30200 stainless steel

8Diaphragm, Closure Member PTFE face with Aramid fabric reinforced EPDM backing and S30400 stainless steel insert.

Diaphragm assembly conforms to FDA 21CFR 177.1550 and USP24 Class VI standards.

9Drive Nut, Actuator Yoke S30400 stainless steel

11 Clamp S30400 stainless steel

13 O-Ring, Stem FKM fluorocarbon

14 Tell Tale Port S31600 stainless steel

15 O-Ring EPDM, conforming to FDA 21CFR 177.1550

27 Locknuts S30400 stainless steel

58 Travel Indicator S30400 stainless steel

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

4

Table 3. Cv Values at Percent Plug Opening

VALVE

SIZE FLOW

DIRECTION

(1)

ACTUATOR

TRAVEL Cv VERSUS PERCENT OF ACTUATOR TRAVEL OPEN

NPS Inches 10 20 30 40 50 60 70 80 90 100

1

Angle &

Inline

AtoB

or

BtoA

0.50 0.02 0.09 0.20 0.40 0.64 0.90 1.16 1.44 1.72 2.00

0.50 0.03 0.16 0.36 0.90 1.20 1.75 2.30 2.90 3.50 4.00

0.75 0.04 0.24 0.62 1.20 2.00 3.10 4.20 5.50 6.80 8.00

1-1/2

Angle

AtoB 0.50 1.45 3.07 4.86 6.95 9.34 12.0 14.3 16.7 19.1 21.7

0.75 2.18 4.86 8.00 12.0 15.5 19.1 22.9 25.9 28.2 29.6

BtoA 0.50 1.82 3.61 5.39 7.42 9.66 12.1 13.4 14.6 15.7 17.1

0.75 2.73 5.39 8.43 12.1 14.1 15.7 17.8 20.2 22.5 24.2

2

Angle

AtoB 0.50 2.60 3.0 3.90 6.94 10.4 14.2 18.4 22.4 26.1 29.4

0.75 2.70 3.90 8.46 14.2 20.5 26.1 31.0 35.3 39.6 42.6

BtoA 0.50 0.50 0.80 1.35 2.49 5.81 11.3 14.6 17.9 21.5 23.5

0.75 0.50 1.35 3.06 11.3 16.2 21.5 24.5 26.0 29.2 32.5

1. Flow A to B is recommended for low discharge pressure. Low discharge pressure being defined as near or below atmospheric pressure.

Table 4. Kv Values at Percent Plug Opening

VALVE

SIZE FLOW

DIRECTION

(1)

ACTUATOR

TRAVEL Kv VERSUS PERCENT OF ACTUATOR TRAVEL OPEN

DN mm 10 20 30 40 50 60 70 80 90 100

25 Angle

&Inline

AtoB

or

BtoA

12.7 0.017 0.077 0.17 0.34 0.55 0.77 0.998 1.24 1.48 1.72

12.7 0.026 0.138 0.31 0.77 1.03 1.51 1.98 2.49 3.01 3.44

19.05 0.034 0.206 0.53 1.03 1.72 2.67 3.61 4.73 5.85 6.88

40

Angle

AtoB 12.7 1.25 2.64 4.18 5.98 8.03 10.32 12.29 14.36 16.43 18.66

19.05 1.88 4.18 6.88 10.32 13.33 16.43 19.69 22.27 24.25 25.46

BtoA 12.7 1.57 3.10 4.64 6.38 8.31 10.41 11.52 12.56 13.50 14.71

19.05 2.35 4.64 7.25 10.41 12.13 13.50 15.31 17.37 19.35 20.81

50

Angle

AtoB 12.7 2.24 3.0 3.35 5.97 8.94 12.21 15.82 19.26 22.45 25.28

19.05 2.33 3.35 7.28 12.21 17.63 22.45 26.66 30.36 34.06 36.64

BtoA 12.7 0.43 0.69 1.16 2.14 4.98 9.72 12.56 15.39 18.49 20.21

19.05 0.43 1.16 2.63 9.72 13.93 18.49 21.07 22.36 25.11 27.95

1. Flow A to B is recommended for low discharge pressure. Low discharge pressure being defined as near or below atmospheric pressure.

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

5

Table 5. Technical Specifications

VALVE SIZE NPS 1 Angle & Inline NPS 1-1/2 Angle NPS 2 Angle

RATED

Installed with flow from

Port A to B

Cv 2 4 8 22 30 29 43

Kv 1.72 3.44 6.88 18.92 25.8 24.94 36.98

Installed with flow from

Port B to A

Cv 2 4 8 17 24 24 32

Kv 1.72 3.44 6.88 14.62 20.64 20.64 27.52

TRAVEL mm 12.7 12.7 19.05 12.7 19.05 12.7 19.05

inches 0.50 0.50 0.75 0.50 0.75 0.50 0.75

BONNET Bolted Clamped

ACTUATOR TYPE 32 or 54 54

RANGEABILITY 100:1

CHARACTERISTIC Modified Equal Percentage

SEAT LEAKAGE ASME/FCI 70-2, Class VI

MAXIMUM OPERATING PRESSURE 10.34 bar (150 Psi)

MAXIMUM OPERATING TEMPERATURE 160_C (320_F)

INTERNAL BODY FINISH (WETTED INTERIOR) <30RaMicroinch/0.76RaMicron(standard)

< 20 Ra Microinch / 0.51 Ra Micron (optional - or as required)

END CONNECTIONS Sanitary (optional welded ends)

Table 6. Actuator Specifications

TYPE 32 Multi-Spring Diaphragm (Single-Acting) 54 Multi-Spring Diaphragm (Single-Acting)

NOMINAL SIZE 32 in254 in2

AIR FAILURE Open or Closed

TRAVEL 12.7 to 19.05 mm (0.50 or 0.75 inches)

AMBIENT TEMPERATURE RANGE -29 to 82_C (-20 to 180_F)

MAXIMUM AIR PRESSURE 2.4 bar (35 psig)

DIAPHRAGM MATERIAL Nitrile / Polyester

SPRING CASES

JSteel, Powder Epoxy-Coated Appliance White per FDA 21 CFR 175.300

or

JStainless Steel

FASTENERS Stainless Steel

YOKE

JDuctile Iron, Powder Epoxy-Coated Appliance White per FDA 21 CFR 175.300

or

JCast Stainless Steel

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

6

Figure 5. Preferred Flow Directions for Self-Draining

E1318 E1319

E1320

E1321

NPS 1 ANGLE VALVE BODY POSITIONED FOR

FORWARD FLOW SELF DRAINING FROM PORT A TO B

NPS 1 INLINE VALVE BODY POSITIONED FOR

FORWARD FLOW SELF DRAINING FROM PORT A TO B

NPS 1-1/2 AND 2 ANGLE VALVE BODY (RECOMMENDED FOR PROCESSES

WHERE ATMOSPHERIC OR SLIGHT VACUUM IS PRESENT DOWNSTREAM

OF PORT B [PORTS A AND B MUST BE DRAINED SEPARATELY)

NPS 1-1/2 AND 2 ANGLE VALVE BODY POSITIONED

FOR SELF DRAINING FROM PORT B TO A

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

7

Table 7. Model Numbering System

VALVE SIZE MODEL NUMBER(1, 2) TRAVEL TYPE (Flow Direction) RATED

NPS DN Inches mm Cv Kv

1

Angle

25

Angle

32-84021SAB 0.50 12.7 ANGLE (Port A to B) 21.72

32-84041SAB 0.50 12.7 ANGLE (Port A to B) 43.44

54-84041SAB 0.50 12.7 ANGLE (Port A to B) 43.44

32-84081SAB 0.75 19.05 ANGLE (Port A to B) 86.88

54-84081SAB 0.75 19.05 ANGLE (Port A to B) 86.88

1

Inline

25

Inline

32-84021SIB 0.50 12.7 ANGLE (Port A to B) 21.72

32-84041SIB 0.50 12.7 ANGLE (Port A to B) 43.44

54-84041SIB 0.50 12.7 ANGLE (Port A to B) 43.44

32-84081SIB 0.75 19.05 ANGLE (Port A to B) 86.88

54-84081SIB 0.75 19.05 ANGLE (Port A to B) 86.88

1-1/2

Angle

40

Angle

54-84161SAB 0.50 12.7 ANGLE (Port A to B) 22 18.92

54-84351SAB 0.75 19.05 ANGLE (Port A to B) 30 25.8

54-84161SA 0.50 12.7 ANGLE (Port B to A) 17 14.62

54-84351SA 0.75 19.05 ANGLE (Port B to A) 24 20.64

2

Angle

50

Angle

54-84251SAB 0.50 12.7 ANGLE (Port A to B) 29 24.94

54-84431SAB 0.75 19.05 ANGLE (Port A to B) 43 36.98

54-84251SA 0.50 12.7 ANGLE (Port B to A) 24 20.64

54-84431SA 0.75 19.05 ANGLE (Port B to A) 32 27.52

1. Model descriptor SA designates an angle valve body. Model descriptor SI designates an inline valve body.

2. Tri-Clamp end connections are standard. For optional welded end connections, substitute (2) for (1) in the model number, i.e. 54-84161SA (Tri-Clamp Ends).

54-84162SA (Welded Ends).

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

8

Figure 6. NPS 1 Angle and Inline Valve Body Orientations

NPS 1 ANGLE VALVE BODY POSITIONED FOR

FORWARD FLOW SELF DRAINING FROM PORT A TO B

NPS 1 INLINE VALVE BODY POSITIONED FOR

FORWARD FLOW SELF DRAINING FROM PORT A TO B

A

A

B

B

E1318

E1319

Table 8. Allowable Pressure Drops (bar): NPS 1 Angle and NPS 1 Inline Valves

VALVE

SIZE FLOW

DIREC-

TION

RATED Kv

TRAVEL ACTUATOR

TYPE

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

DN mm bar 0.2-1.0

bar

0.07-1.2

bar(1) bar bar 0.2-1.0

bar

0.07-1.2

bar(1) bar

25 AtoB

1.72 12.7 32 0.3-1.0 7.58 8.62 8.62 0.2-0.9 6.9 8.62 8.62

3.44 12.7 32 0.3-1.0 6.9 10.34 10.34 0.2-0.9 6.9 8.62 8.62

12.7 54 0.3-1.0 10.34 10.34 10.34 0.2-0.9 10.34 10.34 10.34

6.88 19.05 32 0.3-1.0 3.45 8.62 8.62 0.2-0.9 3.45 8.62 8.62

19.05 54 0.5-0.9 6.9 10.34 10.34 0.2-0.7 6.9 10.34 10.34

1. I/P transducer with 0.07 - 1.2 bar (1 - 17 psig) output signal per FCI 87.2.

2. Shutoff with positioner based on 1.4 bar (20 psi) air supply pressure.

Table 9. Allowable Pressure Drops (psi): NPS 1 Angle and NPS 1 Inline Valves

VALVE

SIZE FLOW

DIREC-

TION

RATED Cv TRAVEL ACTUATOR

TYPE

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

NPS Inches psig 3-15 psig 1-2 psig(1) psig psig 3-15 psig 1-2 psig(1) psig

1AtoB

2.00 0.50 32 5-15 110 125 125 3-13 100 125 125

4.00 0.50 32 5-15 100 150 150 3-13 100 125 125

0.50 54 5-15 150 150 150 3-13 150 150 150

8.00 0.75 32 5-15 50 125 125 3-13 50 125 125

0.75 54 7-13 100 150 150 3-10 100 150 150

1. I/P transducer with 0.07 - 1.2 bar (1 - 17 psig) output signal per FCI 87.2.

2. Shutoff with positioner based on 1.4 bar (20 psi) air supply pressure.

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

9

Figure 7. NPS 1-1/2 and 2 Angle Valve Body

RECOMMENDED FOR PROCESSES WHERE ATMOSPHERIC OR

SLIGHT VACUUM IS PRESENT DOWNSTREAM OF PORT B.

(PORTS A AND B MUST BE DRAINED SEPARATELY)

A

B

E1320

Table 10. Allowable Pressure Drops (bar): Flow Direction A to B: NPS 1-1/2 and 2 Angle Valves

VALVE

SIZE FLOW

DIREC-

TION

RATED Kv

TRAVEL ACTUATOR

TYPE

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

DN mm bar 0.2-1.0

bar

0.07-1.2

bar(1) bar bar 0.2-1.0

bar

0.07-1.2

bar(1) bar

40 AtoB

18.92 12.7 54 0.3-1.0 1.99 3.99 3.99 0.2-0.9 1.99 3.99 6.96

18.92 12.7 54 0.6-1.0 4.96 6.96 6.96 0.2-0.7 4.96 6.96 9.99

25.8 19.05 54 0.3-1.0 1.99 3.99 3.99 0.2-0.9 1.99 3.99 6.96

25.8 19.05 54 0.5-0.9 3.99 5.99 5.99 0.2-0.7 4.92 6.96 9.99

50 AtoB

24.94 12.7 54 0.3-1.0 2.34 4.68 4.68 0.2-0.9 2.34 4.68 8.20

24.94 12.7 54 0.6-1.0 5.86 8.20 8.20 0.2-0.7 5.79 8.20 11.72

36.98 19.05 54 0.3-1.0 2.34 4.68 4.68 0.2-0.9 2.34 4.68 8.20

36.98 19.05 54 0.5-0.9 4.68 7.03 7.03 0.2-0.7 5.86 8.20 11.72

1. I/P transducer with 0.07 - 1.2 bar (1 - 17 psig) output signal per FCI 87.2.

2. Shutoff with positioner based on 1.4 bar (20 psi) air supply pressure.

Table 11. Allowable Pressure Drops (psi): Flow Direction A to B: NPS 1-1/2 and 2 Angle Valves

VALVE

SIZE FLOW

DIREC-

TION

RATED Cv TRAVEL ACTUATOR

TYPE

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

NPS Inches psig 3-15 psig 1-2 psig(1) psig psig 3-15 psig 1-2 psig(1) psig

1-1/2 AtoB

22 0.50 54 5-15 29 58 58 3-13 29 58 101

22 0.50 54 8-15 72 101 101 3-10 72 101 145

30 0.75 54 5-15 29 58 58 3-13 29 58 101

30 0.75 54 7-13 58 87 87 3-10 72 101 145

2AtoB

29 0.50 54 5-15 34 68 68 3-13 34 68 119

29 0.50 54 8-15 85 119 119 3-10 84 119 170

43 0.75 54 5-15 34 68 68 3-13 34 68 119

43 0.75 54 7-13 68 102 102 3-10 85 119 170

1. I/P transducer with 0.07 - 1.2 bar (1 - 17 psig) output signal per FCI 87.2.

2. Shutoff with positioner based on 1.4 bar (20 psi) air supply pressure.

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

10

Figure 8. NPS 1-1/2 and 2 Angle Valve Body Positioned for Self Draining from Port B to A

E1321 A

B

Table 12. Allowable Pressure Drops (bar): Flow Direction B to A: NPS 1-1/2 and 2 Angle Valves

VALVE

SIZE FLOW

DIREC-

TION

RATED Kv

TRAVEL ACTUATOR

TYPE

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

DN mm bar 0.2-1.0

bar

0.07-1.2

bar(1) bar bar 0.2-1.0

bar

0.07-1.2

bar(1) bar

40 BtoA

14.62 12.7 54 0.3-1.0 5.10 10.20 10.20 0.2-0.9 5.10 10.20 17.86

14.62 12.7 54 0.6-1.0 12.76 17.86 17.86 0.2-0.7 12.76 17.86 25.58

20.64 19.05 54 0.3-1.0 5.10 10.20 10.20 0.2-0.9 5.10 10.20 17.86

20.64 19.05 54 0.5-0.9 10.20 15.31 15.31 0.2-0.7 12.76 17.86 25.58

50 BtoA

20.64 12.7 54 0.3-1.0 2.90 5.79 5.79 0.2-0.9 2.90 5.79 10.14

20.64 12.7 54 0.6-1.0 7.24 10.14 10.14 0.2-0.7 7.24 10.14 14.48

27.52 19.05 54 0.3-1.0 2.90 5.79 5.79 0.2-0.9 2.90 5.79 10.14

27.52 19.05 54 0.5-0.9 5.79 8.69 8.69 0.2-0.7 7.24 10.14 14.48

1. I/P transducer with 0.07 - 1.2 bar (1 - 17 psig) output signal per FCI 87.2.

2. Shutoff with positioner based on 1.4 bar (20 psi) air supply pressure.

Table 13. Allowable Pressure Drops (psi): Flow Direction B to A: NPS 1-1/2 and 2 Angle Valves

VALVE

SIZE FLOW

DIREC-

TION

RATED Cv TRAVEL ACTUATOR

TYPE

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

Bench

Spring

Range

Signal to Actuator

With

Positioner

(2)

NPS Inches psig 3-15 psig 1-2 psig(1) psig psig 3-15 psig 1-2 psig(1) psig

1-1/2 BtoA

17 0.50 54 5-15 74 148 148 3-13 74 148 259

17 0.50 54 8-15 185 259 259 3-10 185 259 371

24 0.75 54 5-15 74 148 148 3-13 74 148 259

24 0.75 54 7-13 148 222 222 3-10 185 259 371

2BtoA

24 0.50 54 5-15 42 84 84 3-13 42 84 147

24 0.50 54 8-15 105 147 147 3-10 105 147 210

32 0.75 54 5-15 42 84 84 3-13 42 84 147

32 0.75 54 7-13 84 126 126 3-10 105 147 210

1. I/P transducer with 0.07 - 1.2 bar (1 - 17 psig) output signal per FCI 87.2.

2. Shutoff with positioner based on 1.4 bar (20 psi) air supply pressure.

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

11

Figure 9. Dimensional Drawings for Baumann84000NPS1AngleandInlineValves

E1322

216 (48.5)

249 (9.8)

BAUMANN 32 ACTUATOR WITH

FIELDVUE DVC2000, TOP VIEW

216 (48.5)

31 (1.24)

227

(9.0)

85

(3.4)

32

(1.3) 148

(5.8)

166

(6.52)

127

(5.00)

85

(3.4)

84

(3.3)

40

(1.6)

84000 ANGLE VALVE BODY WITH

BAUMANN 32 ACTUATOR ATC/FO

ACTION, DUAL STOP AND FIELDVUE

DVC2000 DIGITAL VALVE CONTROLLER

84000 INLINE VALVE BODY WITH BAUMANN

32 ACTUATOR ATC/FC ACTION, DUAL STOP

AND 3660/3661 POSITIONER

mm

(inch)

Table14.ValveAssemblyandActuatorWeights

VALVE SIZE 84000 ANGLE ASSEMBLY 84000 IN-LINE ASSEMBLY ACTUATOR WEIGHTS

DN NPS kgs lbs kgs lbs TYPE kgs lbs

25 14.06 9.0 4.31 9.5 32 4.5 10

40 1-1/2 5.22 11.5 N/A 54 11.3 25

50 25.22 11.5 N/A

84000 Valve

D103343X012

Product Bulletin

52.1:84000

November 2012

12

Figure 10. Dimensional Drawing for Baumann 84000 NPS 1-1/2 and 2 Angle Valve with FIELDVUE DVC6010 Digital

Valve Controller

Note: Actuator removal requires 115mm (4.5 inches) vertical clearance.

E1323

279 (411.0)

359 (14.5)

276

(10.9)

mm

(inch)

C

D

E

FG

Table15.ValveAssemblyandActuatorWeights

VALVE SIZE C D E F G

DN NPS mm inch mm inch mm inch mm inch mm inch

40 1-1/2 152.4 6.0 50.8 2.00 82.55 3.25 50.39 1.984 34.44 1.356

50 2160 6.3 50.8 2.00 88.9 3.50 63.9 2.516 47.63 1.875

Emerson Process Management

Marshalltown, Iowa 50158 USA

Sorocaba, 18087 Brazil

Chatham, Kent ME4 4QZ UK

Dubai, United Arab Emirates

Singapore 128461 Singapore

www.Fisher.com

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they arenot

to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are

governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such

products at any time without notice.

E2009, 2012 Fisher Controls International LLC. All rights reserved.

Baumann, Fisher, FIELDVUE, and PlantWeb are marks owned by one of the companies in the Emerson Process Management business unit of Emerson

Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are

the property of their respective owners.

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance

of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

---

---

---

---

---

---

---

---

---

---

---

---