Emerson Fisher Baumann 89000 Data Sheet

2015-03-30

: Emerson Emerson-Fisher-Baumann-89000-Data-Sheet-680833 emerson-fisher-baumann-89000-data-sheet-680833 emerson pdf

Open the PDF directly: View PDF PDF.
Page Count: 8

www.Fisher.com
Baumann™ 89000 Sanitary Control Valve
Baumann 89000 sanitary control valves provide
control solutions for various sanitary process systems.
These valves meet FDA and USP CLVI standards. All
metal parts in contact with the media are made of
S31603 stainless steel and each valve comes standard
with a stainless steel actuator to resist corrosion from
caustic wash down.
The 89000 control valve is designed for use in a wide
range of applications in many industries, including
biotechnology, pharmaceutical, food & beverage,
cosmetics, and others where cleanliness and sterility
are required. The valves have a modular design
allowing for quick assembly and easy maintenance and
calibration.
Features
Sizes ranging from NPS 1/2 to 6
Elastomers meet FDA and USP CLVI standards
Internal surface finish of 20 Ra (0.5 m) available
Stainless steel diaphragm actuators with an
electropolish finish come standard
Actuators are optimally matched to each valve size
to suit many processes
A robust stainless steel yoke construction connects
the valve with its actuator and allows the Fisherr
FIELDVUE™ digital valve controller to be attached
Theentirevalveassemblycanbeeasily
disassembled for inspection and maintenance
Specifications
See table 2 for technical specifications and table 3 for
actuator specifications.
W9850
Baumann 89000 NPS 1/2 Sanitary Control Valve Shown
with FIELDVUE DVC2000 Digital Valve Controller
W9851-2
Baumann 89000 NPS 3 Sanitary Control Valve Shown
with FIELDVUE DVC6200 Digital Valve Controller
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
2
Figure 1. Baumann 89000A Angle Valve Assembly
E1337
Figure 2. Baumann 89000I Inline Valve Assembly
E1338
Table 1. Materials of Construction
Key
Number Description Material
1a Angle Valve Body
S31603 Stainless Steel
1b Upper Inline Valve Body
1c Lower Inline Valve Body
2Diaphragm Actuator
S30400 Stainless Steel
3Actuator Clamp
4Yoke
5Upper Body Clamp
6Middle Body Clamp
7Lower Body Clamp
8Stem Locknut
9O-Ring EPDM
10 Bonnet S31603 Stainless Steel
11 Bearing PTFE/Bronze
12 Valve Plug with Seat
S31603 Stainless Steel
13 Angle Valve Seat/Lower Pipe Connection
(1pc)
14 O-Ring EPDM
15 O-Ring
16 Inline Valve Seat S31603 Stainless Steel
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
3
Figure 3. Baumann 89000A Angle Valve Body
E1339
A
B
Installed with flow from Port B to Port A. Flow from Port A to Port B is not
recommended
1
1
1
Figure 4. Baumann 89000I Inline Valve Body
E1340
TELL TALE
LEAK PORT
A
B
Installed with flow from Port B to Port A. Flow from Port A to Port B is not
recommended
1
1
1
Table 2. Technical Specifications
Nominal Size NPS 1/2 through 6
Valve Body Material S31603 Stainless Steel
Internal Valve Body Finish </=20Ra Microinch / 0.50Ra Micron
Connections Tri-Clamp Standard (Weld Ends, ISO Clamps and others available)
Rangeability 50:1
Bonnet Clamped
Characteristics Modified Equal Percentage
Seat Leakage ANSI / FCI 70-2, CLIV (Metal Seat)
Maximum Operating Pressure 17 bar (250 Psi)
Maximum Operating Temperature,
Fluids, and Gases (Non-Steam) 135_C (275_F)
Maximum Operating Temperature,
Steam 160_C (320_F)
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
4
Table 3. Actuator Specifications
Type 20 50 50H 112
Travel, mm (Inches) 20 (0.8) 30 (1.2) 60 (2.4)
Air Failure Open or Closed
Ambient Temperature
Range -20 to 80_C (0 to 175_F)
Maximum Air Pressure 80 Psi
Spring Cases S30400 Stainless Steel
Yoke S30400 Stainless Steel
Table 4. Allowable Pressure Drops
AIR-TO-OPEN
ACTUATOR
SIZE 20 50 50H 112
Bench Range
(bar) 0.8 - 4.0 1.5 - 3.0 1.5 - 3.0 1.4 - 3.0
Bench Range
(psi) 12 - 58 22 - 44 22 - 44 45 - 75
Valve Stroke,
mm (Inches) 20 (0.8) 30 (1.2) 60 (2.4)
VALVE SIZE
Cv Kv
Port
Diameter mm
(Inches)
ALLOWABLE SHUTOFF PRESSURES
DN NPS bar (psi)
15 1/2 0.29 0.25 7 (0.28) 16 (230)
1.2 1.0 7 (0.28) 16 (230)
20 3/4 1.9 1.6 8.5 (0.33) 16 (230)
4.7 4.0 16 (0.63) 16 (230)
25 1.0 10 9.0 24 (0.94) 16 (230)
40 1-1/2 21 18 32 (1.26) 16 (230)
50 221 18 32 (1.26) 16 (230)
33 28 48 (1.89) 16 (230)
-- 379 68 62 (2.44) 11 (155) 16 (230)
80 -- 99 85 73 (2.87) 7.7 (110) 16 (230)
100 4209 180 90 (3.54) 5 (70) 16 (230)
150 6(A) 442 380 135 (5.31) 8 (115)
AIR-TO-CLOSE
ACTUATOR SIZE 20 50 50H 112
Bench Range, bar 0.8 - 4.0 1.5 - 3.0 1.5 - 3.0 1.4 - 3.0
Bench Range, psi 12 - 58 22 - 44 22 - 44 45 - 75
Valve Stroke, mm (Inches) 20 (0.8) 30 (1.2) 60 (2.4)
VALVE SIZE Allowable Shutoff Pressure
DN NPS bar (psi)
25 - 100 1-4 160 (230)
150 6(1) 10 (145)
1. Consult your Emerson Process Management sales office for NPS6 availability.
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
5
Figure 5. Dimensions for Baumann 89000A Angle Valve with FIELDVUE DVC6200 Digital Valve Controller
C
B
A
ED
GE59923-A
Table 5. Baumann 89000A Angle Valve Dimensions
VALVE SIZE DIMENSIONS
Tri-Clamp A Weld End A Tri-Clamp B Weld End B C D Tr-Clamp E Weld End E
DN NPS Capacity mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch
15 1/2 0.29 62.7 2.5 50 1.97 344 13.5 331 13 165 6.5 261 10.3 65.40 2.57 52.70 2.07
15 1/2 1.2 62.7 2.5 50 1.97 344 13.5 331 13 165 6.5 261 10.3 63.90 2.52 51.20 2.01
20 3/4 1.9 62.7 2.5 50 1.97 344 13.5 331 13 165 6.5 261 10.3 66.35 2.61 53.65 2.11
20 3/4 4.7 62.7 2.5 50 1.97 344 13.5 331 13 165 6.5 261 10.3 62.70 2.47 50.00 1.97
25 110 62.7 2.5 50 1.97 344 13.5 331 13 270 10.6 261 10.3 61.75 2.43 49.05 1.93
40 1-1/2 21 102.7 490 3.54 445 17.5 432 17 270 10.6 261 10.3 104.10 4.1 91.40 3.60
50 233 112.7 4.4 100 3.94 459 18.1 446 17.6 270 10.6 261 10.3 112.70 4.44 100.00 3.94
--- 379 142.7 5.6 130 5.12 531 20.9 519 20.4 270 10.6 261 10.3 148.15 5.83 135.45 5.33
80 --- 99 142.7 5.6 130 5.12 531 20.9 519 20.4 270 10.6 261 10.3 142.70 5.62 130.00 5.12
100 4209 155.9 6.1 140 5.50 552 21.7 536 21.1 270 10.6 261 10.3 155.90 6.14 150.00 5.91
150 6442 Contact your Emerson Process Management sales office for NPS 6 availability.
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
6
Figure 6. Dimensions for Baumann 89000I Inline Valve with FIELDVUE DVC2000 Digital Valve Controller
E1342
C
B
D
A
E
F
A
Table 6. Baumann 89000I Inline Valve Dimensions
VALVE SIZE DIMENSIONS
Tri-Clamp A Weld End A B C D E F
DN NPS mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch
15 1/2 62.7 2.5 50 1.97 34.5 1.36 50 1.97 165 6.5 366 14.4 127 5
20 3/4 62.7 2.5 50 1.97 34.5 1.36 50 1.97 165 6.5 366 14.4 127 5
25 1102.7 490 3.54 48 1.89 74 2.91 165 6.5 464 18.3 153 6
40 1-1/2 102.7 490 3.54 48 1.89 74 2.91 270 10.6 464 18.3 153 6
50 2112.7 4.4 100 3.94 56 2.20 85 3.35 270 10.6 488 19.2 153 6
80 3147.7 5.6 130 5.12 78 3.07 116 4.57 270 10.6 581 22.9 153 6
100 41553.9 6.1 140 5.50 86 3.39 136 5.35 270 10.6 617 24.3 153 6
150 6Contact your Emerson Process Management sales office for NPS 6 availability.
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
7
Table 7. Model Numbering System
89 588
ACTUATOR TYPE VALVE BODY PLUG SERIES CHARACTERISTIC SEAT LEAKAGE VALVE BODY STYLE
20 588 Equal % / Metal Seat
(S31603) IV AAngle
50 IInline
50H
112
89000 Valve
D103346X012
Product Bulletin
52.1:89SV
March 2014
8
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they arenot
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E2009, 2014 Fisher Controls International LLC. All rights reserved.
Baumann, Fisher, and FIELDVUE are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co.
Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property
of their respective owners.
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Navigation menu