Emerson Fisher Easy E Ed Data Sheet

: Emerson Emerson-Fisher-Easy-E-Ed-Data-Sheet-680729 emerson-fisher-easy-e-ed-data-sheet-680729 emerson pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Product Flier
PF51.1:010
D102420X012
July 2008

Globe Valve Selection Guide

Globe Valve Selection Guide

W9510

BAUMANNt 24000
LITTLE SCOTTY

W7957

easy-et

W4182
W8861

GX

EH

Figure 1. Typical Fisherr Sliding-Stem Control Valves

D These straight-pattern (globe), angle-pattern, and three-way
valves offer a broad range of types, sizes, and materials--from DN15 to
600 (NPS 1/2 to 24) low-flow valves to DN 500 (NPS 20) and larger for
demanding high-pressure steam and hydrocarbon service (see figure 1).
D FIELDVUEt digital valve controllers offer digital control and
remote diagnostics. The traditional proven line of Fisher positioners,
controllers, transmitters, and switches also is available.
D ENVIRO-SEALt live-loaded packing systems are available on
many designs to assist in compliance with environmental emissions
requirements. Live-loaded packing is standard on GX valves.
D Whisper Trimt and Cavitrolt anti-noise and anti-cavitation trims
are available for most designs.
D These products deliver excellent dynamic performance to minimize
process variability, providing opportunities to improve your financial
performance.
D For European requirements, complies with PED, ATEX, and EMC
directives.

www.Fisher.com

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide
Low-Flow Valves

E0987

E0985

E0988

BAUMANN 24000SB SERIES

BAUMANN 26000 SERIES

BAUMANN 51000 SERIES

Figure 2. Low-Flow Valves
BAUMANN 26000 SERIES

BAUMANN 24000SB SERIES

BAUMANN 51000 SERIES

Applications
Suited for demanding pH control of acid or
caustic solutions in paper mills, chemical, and
life science facilities

Throttling control of high-pressure, low flow
rates in industrial control applications.

Single-seated, stem-guided globe valve
PTFE lined
Unbalanced

Single-seated, stem-guided globe valve
Unbalanced
Screwed-in seat ring
Metal or soft seats

DN 25 NPS 1

DN 15, 20, 25
NPS 1/2, 3/4, 1

10.3 Bar CWP (150 psig CWP)

207 Bar CWP (3000 psig CWP)

Throttling control of high-pressure low flow
rates in applications often found in laboratories
and pilot plants.

Style
Single-seated, stem-guided globe valve
Unbalanced
Metal or soft seat

Sizes
NPS 1/4 and 1/2
Ratings
207 Bar CWP (3000 psig CWP)

End Connections
Wafer (flangeless design) installs between PN
10 PN through 25 or CL150, CL300 line flanges

NPT internal (standard), buttweld. ASME or EN
Flanged

Threaded G (Metric) or NPT internal

Valve Body Materials
S31600/S31603 Dual Certified (ASTM A479
Barstock)
Alloys available
Valve Plug and Seat Ring (Trim) Materials

S31600/S31603 Annealed (ASTM A479) with
PTFE core

R05200 Tantalum (ASTM B365 cold worked) or
N10276 Nickel Alloy (ASTM B574 , 35 HRC
Max) plug
PTFE seating material

S31600/S21800; alloys available
Soft seat is S31600 with PTFE insert

CF8M
N10276 Nickel Alloy

S21800 Annealed (ASTM A479)
N10276
PTFE soft seat

Flow Characteristics and Maximum Flow Coefficients
Modified equal percentage
Maximum Cv from 0.001 to 4.2

Equal Percentage or Linear
Maximum Cv from 0.0005 to 6.8

Modified equal percentage
Maximum Cv from 0.00013 to 2.5

Shutoff Class (IEC 60534-4 and ANSI/FCI 70-2)
Class IV (Cv 2.5 and 4.2)
Class VI (Cv 0.001 through 1.0)

Class IV (standard with metal seats)
Class VI (with optional soft seats)

Class VI (standard with soft seat)
Class IV (available)

Available Actuators (refer to pages 11 and 12)
Baumann 32 sliding-stem
spring-and-diaphragm actuator
Electric actuators available

2

Baumann 32, 54, or 70 sliding-stem
spring-and-diaphragm actuators
Electric actuators available

Baumann 16 pneumatic actuator
Electric actuators available

Product Bulletin
PF51.1:010
July 2008

Globe Valve Selection Guide
Utility Valves

E0983-1

E0986

BAUMANN 24000 SERIES

BAUMANN 24000SVF/CVF SERIES

Figure 3. Utility Valves
BAUMANN 24000 SERIES

BAUMANN 24000SVF/CVF SERIES
Applications

Bronze utility valve for pressure, flow, or temperature control in the
textile, life science, semiconductor, industrial HVAC, food and beverage,
and other industries
Single-seated, stem-guided globe valve
Unbalanced
Screwed-in seat ring
Metal or soft seats

Flanged carbon and stainless steel utility valve for use in life sciences,
specialty chemical, food-and-beverage, semiconductor, textile, and other
industries
Style
Single-seated, stem-guided globe valve
Unbalanced
Screwed-in seat ring
Metal or soft seats
Sizes

DN 15, 20, 25, 40, and 50
NPS 1/2, 3/4, 1, 1-1/2, and 2

DN 15, 20, 25, 40, and 50
NPS 1/2, 3/4, 1, 1-1/2, and 2
Ratings

ASME B16.15 CL250

PN 10 - 40 or CL150 or CL 300
End Connections

NPT internal

PN 10 - 40 flanges or CL150 or CL300 raised-face flanges
Valve Body Materials
24000SVF: CF3M ASTM A351 316L stainless steel)
24000CVF: WCC (ASTM A216 / GP240GH WN 1.0619)

ASTM B62 Grade C83600 bronze

Valve Plug and Seat Ring (Trim) Materials
S31600 is standard
S31600 is standard
S41600 is optional
S41600 is optional
Soft seat is S31600 (ASTM A479) with PTFE insert
Soft seat is S31600 (ASTM A479) with PTFE insert
Flow Characteristics and Maximum Flow Coefficients
Linear or equal percentage
Maximum Cv from 0.20 to 50.0

Linear or equal percentage
Maximum Cv from 0.00013 to 53.7
Shutoff Class (IEC 60534-4 and ANSI/FCI 70-2)

Class IV (standard with metal seats)
Class VI (with optional soft seats)

Class IV (standard with metal seats)
Class VI (with optional soft seats)
Available Actuators (refer to pages 11 and 12)

Baumann 32, 54, or 70 sliding-stem spring-and-diaphragm actuators
Electric actuators available

Baumann 32, 54, or 70 sliding-stem spring-and-diaphragm actuators
Electric actuators available

3

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide
General-Service and Heavy-Duty Valves

W8486-3/IL
W2966B/IL

GX CONTROL VALVE AND
ACTUATOR SYSTEM

EZ

Figure 4. General-Service and Heavy-Duty Valves
GX

EZ
Applications

Compact, state-of-the-art control valve and actuator system designed to
control a wide range of process liquids, gases, and vapors. Capable of
air supply pressures to 6.0 bar (87 psig), allowing valve shutoff at high
pressure drops. Live-loaded PTFE packing is standard.

easy-e Heavy-duty general service for controlling liquids and gases,
including viscous and other hard-to-handle fluids. UOP applications
Style

Single port, flow up globe style valve
Stem-guided or port-guided
Balanced or unbalanced
Screwed-in seat ring

Single-seated, post-guided globe valve
Unbalanced
Seat ring retained by spacer
Metal or soft seats
Sizes

DN 15, 20, 25, 40, 50, 80, 100, .and 150
NPS 1/2, 3/4, 1, 1-1/2, 2, 3, 4, and 6

DN 15, 20, 25, 40, 50, 80, and 100
NPS 1/2, 3/4, 1, 1-1/2, 2, 3, and 4
Ratings

EN 1092-1 PN 10 to 40
ASME B16.5 CL150 and CL300

EN 1092-1 PN 16, 25, 40, 63 or 100
ASME B16.5 CL125, CL250, CL150, CL300, or CL600
End Connections
NPT internal, flat- or raised-face flanged, ring-type joint, socket-weld,
and buttwelding ends

Flanged raised-face per EN 1092-1 and ASME B16.5

Valve Body Materials
EN 1.0619, 1.4409, or CW2M
ASME SA216 WCC SA351 CF3M, or CW2M

Cast iron, WCC, CF8M, WC9 and others on request (materials available
to EN, ASME, or ASTM specifications)
Valve Plug and Seat Ring (Trim) Materials

CF3M with optional CoCr-A hardfacing
PTFE soft seat

S41600, S31600, or S316000 with CoCr-A on seat or seat and guide)
Soft seat is PTFE
Flow Characteristics and Maximum Flow Coefficients

Equal percentage or linear
Maximum Cv from 0.0389 to 413

Quick opening, linear, or equal percentage
Maximum Cv from 4.44 to 190
Shutoff Class (IEC 60534-4 and ANSI/FCI 70-2)

Class IV (standard with metal seats), Class V (optional with metal seats),
or Class VI (optional with PTFE seats)

Class IV (standard with metal seats), Class V (optional with metal seats),
or Class VI (with optional soft seats)

Available Actuators (refer to pages 11 and 12)
GX multi-spring, pneumatic spring-and-diaphragm

4

657 or 667 spring-and-diaphragm; 585C piston

Product Bulletin
PF51.1:010
July 2008

Globe Valve Selection Guide
General-Service and Heavy-Duty Valves (Continued)

W3421-3/IL

W3162-3/IL

ED

ES

Figure 5. General-Service and Heavy-Duty Valves (Continued)
ES

ED
Applications

easy-e Heavy-duty, general-service valve for clean liquids and gases.
Positive shutoff at seat

easy-e heavy-duty, general- and severe- service valve for clean liquids and
gases with higher pressure drops but where tight shutoff is not required
Style

Cage-guided globe or angle valve
Unbalanced
Cage-retained seat

Cage-guided globe or angle valve
Balanced trim
Cage-retained seat
Sizes

ES: DN 15, 20, 25, 40, 50, 65, 80, 100, 150, 200
NPS 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 6, 8
EWS: DN 100 x 50 through 300 x 200
NPS 4 x 2 through 12 x 8

ED: DN 25, 40, 50, 65, 80, 100, 150, 200
NPS 1, 1-1/2, 2, 2-1/2, 3, 4, 6, 8
EWD: DN 100 x 50 through 600 x 500
NPS 4 x 2 through 24 x 20
Ratings

EN 1092-1 PN 10, 16, 25, 40, 63, or 100
ASME B16.5 CL125, CL250, CL150, CL300, or CL600

PN 10, 16, 25, 40, 63, or 100
CL125, CL250, CL150, CL300, or CL600
End Connections

NPT internal, flat- or raised-face flanged, ring-type joint, socket-weld and
buttwelding ends

PN 10, 16, 25, 40, 63, or 100
CL125, CL250, CL150, CL300, or CL600

Valve Body Materials
Cast iron, WCC, CF8M, WC9 steel, and others on request (materials
available to EN, ASME, or ASTM specifications)

Cast iron, WCC, CF8M, WC9, and others on request (materials available
to EN, ASME, or ASTM specifications)

Valve Plug and Seat Ring (Trim) Materials
S41600, S31600, or S31600 with CoCr-A on seat or seat and guide)
Soft seat is PTFE

S41600, S31600, or S316000 with alloy 6 on seat or seat and guide

Flow Characteristics and Maximum Flow Coefficients
Quick opening, linear, or equal percentage
Maximum Cv from 6.53 to 1110

Quick opening, linear, or equal percentage
Maximum Cv from 17.2 to 6500
Shutoff Class (IEC 60534-4 and ANSI/FCI 70-2)

Class IV (standard with metal seats), Class V (optional with metal seats),
or Class VI (with optional soft seats)

Class II (standard)
Class III or IV (optional depending on size)

Available Actuators (refer to pages 11 and 12)
657 or 667 spring-and-diaphragm; 585C piston

657 or 667 spring-and-diaphragm; 585C piston

5

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide
Heavy-Duty and Severe-Service Valves

W0451-3/IL
W5815-1/IL

ET

HP AND EH

Figure 6. Heavy-Duty and Severe-Service Valves
ET

HP and EH
Applications

easy-e heavy-duty, general- and severe- service valve for tight shutoff
with clean liquids and gases with higher pressure drops and
temperatures to 232_C (to 316_C with optional seal materials)

For high-pressure and severe-service applications. Available with special
trim to combat noise and cavitation. Often used in power generation applications
Style

Cage-guided globe or angle valve
Balanced trim
Cage-retained seat

Cage-guided globe or angle valve
Balanced or unbalanced trim
Sizes

ET: DN 25, 40, 50, 65, 80, 100, 150, 200
NPS 1, 1-1/2, 2, 2-1/2, 3, 4, 6, 8
EWT: DN 100 x 50 through 600 x 500
NPS 4 x 2 through 24 x 20

DN 25, 50, 80, 100, 150, 200, 250, 300, 350, 500
NPS 1, 2, 3, 4, 6, 8, 10, 12, 14, 20
Ratings

PN 10, 16, 25, 40, 63, or 100
CL125, CL250, CL150, CL300, or CL600

DIN PN 160, 250, 420
CL900, CL1500, CL2500, or intermediate ratings
End Connections

NPT internal, flat- or raised-face flanged, ring-type joint, socket-weld and
buttwelding ends

Raised-face flanged, ring-type joint, socket-weld and buttwelding ends
Expanded ends

Valve Body Materials
Cast iron, WCC, CF8M, WC9, and others on request (materials available
to EN, ASME, or ASTM specifications)

WCC, WC9, LCC, CF8M (materials available to EN, ASME, or ASTM
specifications)

Valve Plug and Seat Ring (Trim) Materials
S41600, S316000, or S31600 with CoCr-A on seat or seat and guide)
Soft seat is PTFE

S41600, S31600, S44004, or S31600 with CoCr-A on seat or seat and
guide)

Flow Characteristics and Maximum Flow Coefficients
Quick opening, linear, or equal percentage
Maximum Cv from 17.2 to 6500

Linear, equal percentage or characterized
Maximum Cv from 0.354 to 2600
Shutoff Class (IEC 60534-4 and ANSI/FCI 70-2)

Soft seat: V
Metal seat: IV (standard) or V (optional)

Class II, III, IV or V (depending on size and construction)
Available Actuators (refer to pages 11 and 12)

657 or 667 spring-and-diaphragm; 585C piston

6

657 or 667 spring-and-diaphragm; 585C piston

Product Bulletin
PF51.1:010
July 2008

Globe Valve Selection Guide
Three-Way Valves

W0665-3
W9471

YD AND YS

GX 3-Way

Figure 7. Three-Way Valves
GX 3-Way

YD and YS
Applications

Compact, state-of-the-art control valve and actuator system, designed to
achieve accurate controllability of waters, oils, and other industrial fluids. Excellent for accurate temperature control. Live-loaded PTFE packing is standard.

Three-way valves for flow-mixing or flow-splitting service. The YS is unbalanced, and the YD is balanced.
Style

Side-port common (unbalanced) construction for both diverging and converging flow.
Optional bottom-port common for high pressure-drop applications.

Cage-guided three-way globe valves
Balanced or unbalanced trim
Sizes
DN 15, 25, 40, 50, 65, 80, and 100
NPS 1/2, 3/4, 1, 1-1/2, 2, 2-1/2 3, and 4

DN 25, 40, 50, 80, and 100
NPS 1, 1-1/2, 2, 3, and 4

Ratings
EN 1092-1 PN 10, 16, 25, 40, 63, or 100
ASME B16.5 CL125, CL250, CL150, CL300, or CL600

EN 1092-1 PN 10 to 40
ASME B16.5 CL150 and CL300

End Connections
Raised-face flanges per EN 1092-1 and ASME B16.5

NPT internal, flat- or raised-face flanged, ring-type joint, socket-weld and
buttwelding ends
Valve Body Materials

EN 1.0619 or 1.4409
ASME SA216 WCC steel, ASME SA351 CF3M

Cast iron, WCC or LCC, CF8M (materials available to EN, ASME, or
ASTM specifications)
Valve Plug and Seat Ring (Trim) Materials

CF3M plug and bottom seat with optional hardfacing (bottom port
CB7Cu-1, S416000, CF8M, or CF8M with CoCr-A on seat or seat and
construction). Both side- and bottom-port constructions use a hardfaced
guide
upper seat
Flow Characteristics and Maximum Flow Coefficients
Linear
Maximum Cv from 14 to 178

Linear
Maximum Cv 8.10 to 567
Shutoff Class (IEC 60534-4 and ANSI/FCI 70-2)

Metal seat Class IV (standard)

Class II or IV (YD)
Class IV or V (YS)
Available Actuators (refer to pages 11 and 12)

GX multi-spring, pneumatic diaphragm

657 or 667 spring-and-diaphragm;
585C piston

7

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide
Cryogenic and Lined Valves

W4521-2/IL

W6396/IL

RSS

ET-C & EZ-C

Figure 8. Cryogenic and Lined Valves
ET-C and EZ-C

RSS
Applications

easy-e stainless steel cryogenic valves for liquefied natural gas and
other special chemical and hydrocarbon applications with temperatures
to 198_C

Lined valve for severely corrosive or toxic process fluids. An economic
alternative to alloy bodies. Limited in pressure and temperature
Style

Single-seated post-guided (EZ-C) or cage-guided (ET-C) globe valve
Unbalanced (EZ-C) or balanced (ET-C)
Metal seats

Fully lined, single-seated, unbalanced globe valve
Includes bellows stem seal
Sizes

ET-C: DN 80, 100, 150, 200
NPS 3, 4, 6, 8
EWT-C: 150 x 100, 200 x 100, 200 x 150, 250 x 200, 300 x 200
NPS 6 x 4, 8 x 4, 8 x 6, 10 x 8, 10 x 8
EZ-C: DN 25, 40, 50, 80, 100
NPS 1, 1-1/2, 2, 3, 4

DN 25, 40, 50, 80, 100, 200
NPS 1, 1-1/2, 2, 3, 4
Face-to-face dimensions to EN or ASME specifications
Ratings

EN 1092-1 PN 10, 16, 25, 40, 63, or 100
ASME B16.5 CL150, CL300, or CL600

CL150 or CL300
End Connections

Raised-face flanges

Raised-face flanges
Valve Body Materials

CF8M (materials available to EN, ASME, or ASTM specifications)

Ductile iron with PFA liner

Valve Plug and Seat Ring (Trim) Materials
S31600 with CoCr-A hardfacing on seat or on seat and guide

Valve Plug and Seat Ring: Pure modified (reinforced) PTFE
Bellows: Heavy-duty PTFE (TFM1705) with 304L SST support rings

Flow Characteristics and Maximum Flow Coefficients
Quick opening, linear, or equal percentage
Maximum Cv from 13.2 to 1160

Equal percentage
Maximum Cv from 1.91 to 145
Shutoff Class (IEC 60534-4 and ANSI/FCI 70-2)

Class IV (standard)
Class VI (optional)

Class VI (soft seat)
Available Actuators (refer to pages 11 and 12)

657 or 667 spring-and-diaphragm; 585C piston

8

657 or 667 spring-and-diaphragm; 585C piston

Product Bulletin
PF51.1:010
July 2008

Globe Valve Selection Guide

Other Valve Options
Cavitating Liquids . . . Cavitrol trim is available in
many of these valves and in other severe-service
valves. Cavitrol trim can minimize cavitation noise
and damage in a properly sized valve.
Noisy Gases . . . Whisper Trim cages can
substantially reduce noise in gas, vapor, and steam
applications. Whisper Trim is available in several
performance levels in many of these valves.
Materials for Sour Service . . . Materials and

manufacturing procedures are available for
compatibility with NACE MR0103 and MR0175/ISO
15156.
Protection Against Process Fluid Emissions . . .
Optional ENVIRO-SEAL and HIGH-SEAL packing
systems provide an improved stem seal to help
prevent the loss of valuable or hazardous process
fluids. These live-loaded systems provide longer
packing life and reliability. Live-loaded packing is
standard on GX and GX 3-way valves.

W2629/IL

W3747/IL

WHISPER TRIM III CAGE
FOR REDUCTION OF NOISE
IN GAS AND VAPOR APPLICATIONS

CAVITROL TRIM
FOR CONTROL OF LIQUID CAVITATION

WHISPER TRIM III
NOISE-ABATEMENT TRIM
FOR GX VALVES

E0897/IL

W5803-3/IL

PTFE ENVIRO-SEAL PACKING SYSTEM

LIVE-LOADED PACKING SYSTEM FOR GX VALVES

Figure 9. Other Valve Products

9

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide

Other Valve Products
Steam Conditioning Service

desuperheaters, and turbine bypass systems are
available.

Fisher steam conditioning products accurately
control steam for high efficiency in power generation,
industrial processing, space heating, and auxiliary
steam applications. Steam conditioning valves,

For a broad range of process control valves--beyond
those mentioned here--contact your nearest sales
office.

W6313/IL

W8740-2A

TBX STEAM CONDITIONING VALVE

DVI DESUPERHEATER

Figure 10. Steam Conditioning Service

10

Product Bulletin
PF51.1:010
July 2008

Globe Valve Selection Guide
Globe Valve Actuators (Spring-and-Diaphragm)

W6726-1/IL

W0363-1/IL

BAUMANN 32, 54, OR
70 ACTUATOR

657 AND 667

Figure 11. Globe Valve Actuators
BAUMANN

657 and 667
Features

Compact, light-weight actuator designed for use with Baumann
sliding-stem valves

Heavy-duty actuators
Style

Spring-return pneumatic diaphragm

Spring-return pneumatic diaphragm

Typical Maximum Thrust, Newtons (Varies with Operating Pressure, Spring, and Construction)
3750

10 000 to 200 000
Accessories

Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital
valve controller, limit switch box, supply pressure filter-regulator,
handwheel for 32 and 54 actuator

Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital
valve controller, limit switches, position transmitters, handwheels, travel
stops, and supply pressure filter-regulator

AIR TO CLOSE

AIR TO OPEN
3025

Figure 12. Globe Valve Actuators
3025
Features
Long travel, up to 200 mm (8 inches)
Style
Spring-opposed pneumatic diaphragm
Typical Maximum Thrust, Newtons (Varies with Operating Pressure, Spring, and Construction)
Air to Close, Size P900: 76 300
Air to Open, Size P900: 61 200
Accessories
Handwheels, transducers, position transmitters, air relays, volume boosters, switching valves, lockable valves, limit switches, and solenoid valves are
available for actuator mounting.

11

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide
Globe Valve Actuators (Piston)

W2795/IL

W6304-1/IL

585C

585CLS (Long Stroke)

Figure 13. Globe Valve Actuators
585C

585CLS
Features

Heavy-duty actuators

Heavy-duty actuators for large valves and valves with long travel
Style

Double-acting piston or spring-bias piston

Double-acting piston

Typical Maximum Thrust, Newtons (Varies with Operating Pressure, Spring, and Construction)
30 700 at 10.3 bar operating pressure

200 170 at 9.85 bar operating pressure with a 508 mm (20-inch)
diameter cylinder. Note: All smaller cylinders have a maximum operating
pressure of 10.3 bar
Accessories

I/P transducers, pneumatic or electro-pneumatic valve positioners,
FIELDVUE digital valve controller, limit switches, position transmitters,
handwheels, travel stops, and supply pressure filter-regulator

I/P transducers, pneumatic valve positioners, limit switches, position
transmitters, handwheels, travel stops, and supply pressure
filter-regulator

Other actuators available are . . .
S Full range of self-operated control valves
S Manual handwheel actuator

12

Product Bulletin
PF51.1:010
July 2008

Globe Valve Selection Guide

Valve Controllers and Positioners

W8077

W8861/IL

FIELDVUE DVC6000

FIELDVUE DVC2000
MOUNTED ON GX VALVE

Figure 14. Valve Controllers and Positioners

FIELDVUE Digital Valve Controller
FIELDVUE digital valve controllers are
communicating, microprocessor-based controllers
that convert a current signal to a pressure signal to
operate the actuators.
Through the HARTr or FOUNDATIONt fieldbus
communications protocol, the controller gives easy
access to critical valve assembly information. AMS
ValveLinkt Software allows easy access to valve
assembly performance characteristics. Vital

information can be obtained without having to pull
the valve from the line.
Performance diagnostic tests, including on-line
friction, deadband analysis, and trending can be run
while the valve is in service and operating. Valve
signature, dynamic error band, and step response
are displayed in an intuitive user-friendly
environment that allows easy interpretation of data.
FIELDVUE models include the DVC6000 and
DVC2000 with local user interface for calibration.

13

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide

Valve Controllers and Positioners (Continued)
Pneumatic and Electro-Pneumatic Valve Positioners

W8590
W5500

3661 I/P POSITIONER
MOUNTED ON GX VALVE

Figure 15. Valve Positioners

Several pneumatic and electro-pneumatic valve
positioners are available, including the 3660 P/P,
3661 I/P, 3582 P/P, and 3582i I/P positioners.

14

3582i I/P POSITIONER
MOUNTED ON easy-e VALVE

Product Bulletin
PF51.1:010
July 2008

Globe Valve Selection Guide

Note
Neither Emerson, Emerson Process
Management, nor any of their affiliated
entities assumes responsibility for the
selection, use and maintenance of any
product. Responsibility for the
selection, use and maintenance of any
product remains with the purchaser
and end-user.

15

Product Flier
PF51.1:010
July 2008

Globe Valve Selection Guide
Sales Offices
For the name and location of your nearest sales office, refer to
www.emersonprocess.com/Fisher/support/contactus/index.html or contact our headquarters:
Europe
Emerson Process Management
Prince Regent House
Chatham Maritime Kent ME4 4QZ
United Kingdom
T +44 (0)16 34 89 58 00
F +44 (0)16 34 89 58 42
Middle East and Africa
Emerson Process Management
P.O. Box 17 003
Jebel Ali Free Zone
Dubai
United Arab Emirates
T +(971) 4 883 5235
F +(971) 4 883 5312
Russia
Emerson Process Management
Malaya Trubetskaya
Street 8 - 11th Floor
119881 Moscow
T (7) 095 232 69 68
F (7) 095 245 86 85

Latin America
Emerson Process Management
Av. Hollingsworth 325
Iporanga Sorocaba, SP
CEP 18.087-105
Brazil
T +(55)(15)3238-3788
F +(55)(15)3238-3300
Asia Pacific
Emerson Process Management
Asia Pacific Pte Ltd
1 Pandan Crescent
Singapore 128461
Singapore
T +(65) 6777 8211
F +(65) 6777 8010
Japan
Nippon Fisher Co. Ltd.
Shinagawa NF Building
4th Floor, 1-2-5 HigashiShinagawa
ShinagawaKu, Tokyo, 140-0002
Japan
T (81)-3-5769-6900
F (81)-3-5769-6901
North America
Emerson Process Management
301 S. 1st Avenue
Marshalltown IA 50158
USA
T (641) 754-3011
F (641) 754-2830

Fisher, Baumann, easye, Cavitrol, ENVIRO-SEAL, FIELDVUE, ValveLink, and Whisper Trim are marks owned by one of the companies in the
Emerson Process Management business division of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are
trademarks and service marks of Emerson Electric Co. HART is a mark owned by the HART Communications Foundation. FOUNDATION fieldbus is a
mark owned by the Fieldbus Foundation. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they
are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or
applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the
designs or specifications of such products at any time without notice. Neither Emerson, Emerson Process Management, nor any of their affiliated
entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of
any product remains solely with the purchaser and end user.

Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
EFisher
16
Controls International LLC 1996, 2008; All Rights Reserved



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : untitled
Create Date                     : 2010:06:09 08:40:50-05:00
Modify Date                     : 2010:06:09 08:41:24-05:00
Metadata Date                   : 2010:06:09 08:41:24-05:00
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:bc26c866-04c7-4f1d-8190-2a08b9822463
Instance ID                     : uuid:201beffb-8ece-444e-b03b-2594ab57a43b
Page Count                      : 16

EXIF Metadata provided by EXIF.tools