Emerson Fisher Easy E Ez Data Sheet

: Emerson Emerson-Fisher-Easy-E-Ez-Data-Sheet-680799 emerson-fisher-easy-e-ez-data-sheet-680799 emerson pdf

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Fisherr easy-et Cryogenic
Sliding-Stem Control Valves
Fisher easy-e cryogenic valves are globe-style,
single-port, valves featuring stainless steel
construction materials and fabricated extension
bonnets. Fisher ET-C and EWT-C valves are
pressure-balanced, whereas the Fisher EZ-C valve is an
unbalanced design. These cryogenic valves are
designed to provide throttling or on-off control of
liquids and gases at cryogenic temperatures as low as
-198_C (-325_F).
When required, these rugged valves can reliably
provide tight shutoff for special applications within the
chemical and hydrocarbon processing industries, such
as certain liquefied natural gas services.
The high-capacity ET-C and EWT-C valves with
pressure-balanced trim allow the use of smaller,
lower-cost actuators, reducing installed costs in
high-pressure and high-flow-rate applications.

The easy-e Valve Family

W6370--1

Typical Fisher easy-e Cryogenic Valve with Extension
Bonnet and 585C Actuator

These valves are part of the versatile easy-e family of
industrial control valves. Special features include:



ET-C and EWT-C: Different cage/plug styles provide
particular flow characteristics for highly-specialized
applications. The standard cage comes in two
different flow characteristics: J equal percentage
and J linear.

www.Fisher.com

EZ-C: Interchangeable, restricted-capacity trims and
full-sized trims match a variety of process flow
demands for highly-specialized applications. The
standard plug is designed with three different flow
characteristics: J equal percentage, J linear, and
J quick-opening.

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Features


Cryogenic Spring-Loaded Seal Ring–The seal ring
and associated valve parts in the ET-C and EWT-C
valves are specifically designed and manufactured
for excellent performance at low temperatures.



Stable Control–Rugged cage guiding in the ET-C
and EWT-C valves stabilizes the valve plug at all
points in its travel to reduce vibration, mechanical
noise, and the need for hydraulic snubbers.



Cost Effective Operation and Economical
Maintenance–Increased wear resistance of
hardened stainless steel trim means long-lasting
service. Balanced valve plug construction in the
ET-C and EWT-C valves permits use of smaller,
lower-cost Fisher actuators.





Piping Economy–Expanded end connections of EW
Series valves may reduce the need for line swages
while accommodating oversized piping
arrangements used to limit fluid flow velocities.
Cryogenic Design Features–The stainless steel valve
body and bonnet with fabricated extension are
designed to meet low temperature requirements.
The unique metal-to-metal seat design provides
repeatable tight shutoff, reducing maintenance
costs.



Rugged Metal Seat–The metal-to-metal seat is
designed and manufactured to provide long-lasting,
reliable, tight shutoff at both ambient and
cryogenic temperatures without the need for
periodic lapping. This reduces the need for soft
seats, even in applications with stringent shutoff
requirements.



Fugitive Emission Protection–The optional
ENVIRO-SEALt packing systems provide an
improved stem seal to help prevent the loss of
valuable or hazardous process fluids, and keep
emissions below the EPA limit of 100 ppm.
Additionally, these live-loaded packing systems can
provide long life and reliability at low temperatures
to help reduce maintenance costs and downtime.



Thoroughly Tested–Extensive cryogenic testing
during the development of the valve design reduces
the need for expensive cold testing for most
applications, which results in quicker delivery and
greater value.



Easy Maintenance–Quick-change trim, with a
clamped-in seat ring, reduces the disassembly/
assembly time. The valve body can stay in the
pipeline during removal of trim parts for inspection
or maintenance.



Sour Service Capability–For NACE applications,
consult your Emerson Process Management sales
office.

Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tables
ET-C and EWT-C Typical Trim Materials . . . . . . . . . .
EZ-C Typical Combinations of Metal Trim Parts . . .
Maximum Allowable Actuator Thrust . . . . . . . . . . .

2

2
3
5
5
5

ET-C and EWT-C Port Diameters,
Valve Plug Travel, Stem and Yoke Diameters . . . 8
EZ-C Port Diameters, Travel, Valve Plug and Stem
and Yoke Diameters . . . . . . . . . . . . . . . . . . . . . . . 8
Bolting Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
EZ-C Maximum Allowable Pressure Drop . . . . . . . . . 9
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012
Specifications

Trim Material

Available Configurations
ET-C: Single-port, globe-style control valve with cage
guiding, balanced valve plug, and
push-down-to-close valve plug action (figure 1)
EWT-C: Single-port, globe-style control valve with
cage guiding, balanced valve plug,
push-down-to-close valve plug action, and with
expanded end connections (figure 1)
EZ-C: Single-port, globe-style control valve with
post-guiding, unbalanced valve plug, and
push-down-to-close valve plug action (figure 2)

See tables 1 and 2
Shutoff Classifications Per ANSI/FCI 70-2 and IEC
60534-4
ET-C and EWT-C.
Metal Seat:.
J Class IV is standard
J Class V Air Test is optional
(Test will be 50 psid air)(6).
J Class VI (Consult your Emerson Process
Management sales office)

Valve Sizes
ET-C: J NPS 3, J 4, J 6, and J 8
EWT-C: J NPS 6X4(1), J 8X4, J 8X6, J 12X6, and
J 10X8
EZ-C: J NPS 1, J 1-1/2, J 2, J 3, and J 4

Composition Seat:.
J Standard air test is standard
J Class VI is optional
EZ-C.

End Connection Styles(2)

Metal Seat:.
J Class IV is standard
J Class VI is optional

CL150, 300, or 600 raised-face flanges per J ASME
B16.5, J EN 1092-1/B
Maximum Inlet Pressure(2)

Maximum Actuator Thrust

Consistent with J CL150 and J CL300
pressure-temperature ratings per ASME B16.34

See table 3

J CL600 valves with B8M Class 2 bolting are
consistent with CL600 pressure-temperature ratings
per ASME B16.34 except as shown below:
VALVE

EZ-C

ET-C and EWT-C

VALVE SIZE,
NPS

Conformance to Customer Specifications

MAXIMUM INLET
PRESSURE
at 38_C (100_F)
Bar
Psig

1

77

1110

2

83

1200

3

94

1370

3

94

1370

6, 8 x 6,
12 x 6

75

1085

8, 10 x 8

96

1390

ET-C with metal seats and EZ-C valves successfully
passed type approval testing per SIPM (Shell)
specification T-2.253.730
Flow Characteristics
ET-C, EWT-C, and EZ-C.
J Equal percentage
J Linear
EZ-C Only.
J Quick-opening

J CL600 valves with optional S20910 (XM-19)
bolting are consistent with CL600
pressure-temperature ratings per ASME B16.34

Flow Direction(5)
ET-C and EWT-C.
Normally down for linear and equal percentage trims.
Flow up for Whisper Trimt. See figure 1.
EZ-C.
Up through the seat ring only. See figure 2

Maximum Pressure Drops(2)
Same as maximum inlet pressure, except where
limited by spiral wound gasket for EZ-C
(see tables 7 and 8)
(Continued)

3

Product Bulletin

51.1:easy-e Cryogenic
August 2012

easy-e Cryogenic Valves

D102189X012

Specifications (Continued)
Standard Construction Materials
Valve Body and Bonnet: CF8M (316 SST)
Body-Bonnet Bolting: SA-193-B8M Class 2 studs
with SA-194-8M nuts (see table 6)
Bonnet Bushing: S31600/filled PTFE
Flat Sheet Gaskets: S31600/graphite
Spiral Wound Gasket: N06600/graphite
Packing Studs and Nuts: S31600 SST
Seal Ring (ET-C and EWT-C): UHMWPE(3) with R30003
spring
Back-Up Ring (ET-C and EWT-C): S31600 (316 SST)
Retaining Ring (ET-C and EWT-C): S30200 (302 SST)
Load Ring (for ET-C, NPS 8 and for EWT-C, NPS 10 x 8
only): N07718
Packing Follower, Lantern Ring, Packing Spring(4) and
Packing Box Ring: S31600 SST
Material Temperature Capabilities(2)
ET-C and EWT-C
-198 to 66_C (-325 to 150_F)
EZ-C
-198 to 149_C (-325 to 300_F)
Bonnet Extension Length
See figures 3 and 4 for standard valve dimensions
Flow Coefficients and Noise Level Prediction
See Catalog 12
Port Diameters, Plug Travel, Yoke Boss, and Stem
Diameter
See tables 4 and 5
Packing Arrangements
Standard Material.
J Single PTFE V-ring. See figures 1 and 2

Optional Materials.
J Double PTFE V-ring and
J Graphite ribbon/filament
ENVIRO-SEAL Packing Systems: See figure 5
Packing Material: J PTFE V-ring and J Graphite ULF
See Bulletin 59.1:061, ENVIRO-SEAL Packing Systems
for Sliding-Stem Valves, for more information
Approximate Weights (CL600 Valves)
ET-C:.
NPS 3: 51 kg (135 lb)
NPS 4: 95 kg (210 lb)
NPS 6: 211 kg (465 lb)
NPS 8: 372 kg (820 lb)
EWT-C:.
NPS 6X4: 200 kg (440 lb)
NPS 8X4: 277 kg (610 lb)
NPS 8X6: 318 kg (700 lb)
NPS 12X6: 730 kg (1610 lb)
NPS 10X8: 753 kg (1660 lb)
EZ-C:.
NPS 1: 15 kg (33 lb)
NPS 1-1/2: 23 kg (48 lb)
NPS 2: 41 kg (90 lb)
NPS 3: 60 kg (130 lb)
NPS 4: 95 kg (210 lb)
Options
ET-C and EWT-C: J Whisper Trim III and WhisperFlot
trim for aerodynamic noise attenuation, and
J Cavitrolt III cages for liquid cavitation protection
are available. Contact your Emerson Process
Management sales office for information
EZ-C: J Micro-Flute and J Micro-Flow trim

1. Valve size number is end connection size by normal trim size. For example, an NPS 6X4 EWT-C valve has NPS 6 end connections with NPS 4 trim (see table 4).
2. Do not exceed the pressure or temperature limits in this bulletin, and any applicable code limitations.
3. UHMWPE stands for ultra high molecular weight polyethylene.
4. A spring is used only with PTFE V-ring packing. A lantern rings replace the spring in other packing arrangements.
5. Down is in through the cage and out the seat ring (see figure 1).
6. Class V shutoff cannot be performed with water. The residual trapped moisture from testing with water can cause valve and trim damage from the ice crystals formed at below freezing
service temperatures.

4

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Table 1. Fisher ET-C and EWT-C Typical Trim Material(1)
Trim Designation

Valve Plug

Valve Stem

Cage

Seat Ring

429

S31600 SST with CoCr-A (Alloy 6)
hard-faced seat

S20910

Chrome-plated S31600 SST

S31600 SST

430(2)

S31600 SST

S20910

Chrome-plated S31600 SST

S31600 SST/CTFE

431

S31600 SST with CoCr-A (Alloy 6)
hard-faced seat and guide

S20910

Chrome-plated S31600 SST

S31600 SST

1. Whisper Trim III requires use of Trim 431.
2. Soft seat construction.

Table 2. Fisher EZ-C Typical Combinations of Metal Trim Parts for Equal Percentage (Including Micro-Form), Linear,
and Quick-Opening Valve Plugs
Trim Designation
327

328

Valve Plug

Valve Stem

Seat Ring

Seat Ring Retainer

Guide Bushing

S31600 SST with
CoCr-A (Alloy 6)
hard-faced Seat and
Guide
S31600 SST with
CoCr-A (Alloy 6)
hard-faced Seat

S20910
(XM-19)

S31600

CF8M

R30006

Table 3. Maximum Allowable Actuator Thrust for Standard Bonnet Extension Length
VALVE

3
4, 6X4, 8X4
ET-C and EWT-C
6, 8X6, 12X6
8, 10X8
1
1-1/2
EZ-C

STEM DIAMETER

VALVE SIZE, NPS

2
3
4

MAXIMUM ALLOWABLE STEM LOAD
FOR S20910 (XM-19) STEM MATERIAL
N
Lb

mm

Inches

12.7

1/2

15,301

3440

19.1

3/4

45,459

10,220

12.7

1/2

16,458

3700

19.1

3/4

46,971

10,560

19.1

3/4

36,385

8180

25.4

1

81,487

18,320

19.1

3/4

41,366

9300

25.4

1

87,003

19,560

9.5

3/8

5382

1210

12.7

1/2

13,166

2960

9.5

3/8

5338

1200

12.7

1/2

13,166

2960

12.7

1/2

14,367

3230

19.1

3/4

44,169

9930

12.7

1/2

15,301

3440

19.1

3/4

45,459

10,220

12.7

1/2

16,458

3700

19.1

3/4

46,971

10,560

5

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Figure 1. Fisher ET-C and EWT-C Valve Detail
LOAD
RING

RETAINING RING
BACK-UP RING

SEAL RING
W1214-2*
W6398-1*

VIEW A

PACKING
FLANGE
PACKING
FOLLOWER

STANDARD NPS 8 AND 10x8
CONSTRUCTION DETAIL

PACKING STUDS
AND NUTS
PTFE V-RING PACKING
(STANDARD ARRANGEMENT)

ACTUATOR
LOCKNUT
PACKING
SPRING

STEM

BODY-BONNET
BOLTING

BUSHING

EXTENSION
BONNET
VALVE
BODY
VALVE
PLUG

FLOW

SPIRAL WOUND GASKET,
BONNET GASKET, AND SHIM

CAGE

SEAT RING

SEAT RING
GASKET

W6397-1*

6

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Figure 2. Fisher EZ-C Valve Assembly Detail
PACKING
FLANGE
PACKING
FOLLOWER
ACTUATOR
LOCKNUT

PACKING STUDS
AND NUTS
V-RING PACKING
(STANDARD ARRANGEMENT)

PACKING
SPRING

STEM

BODY-BONNET
BOLTING

EXTENSION
BONNET
GUIDE
BUSHING

SPIRAL WOUND GASKET,
BONNET GASKET, AND SHIM

VALVE BODY

SEAT RING
RETAINER
FLOW
SEAT RING

VALVE PLUG
W6396-1

SEAT RING
GASKET

7

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Table 4. Fisher ET-C and EWT-C Port Diameters, Valve Plug Travel, Stem and Yoke Diameters
VALVE SIZE, NPS
ET-C

PORT
DIAMETER

EWT-C

VALVE STEM AND YOKE BOSS
DIAMETERS

MAXIMUM
VALVE PLUG
TRAVEL

Standard
Stem

Optional
Yoke Boss

Stem

Yoke Boss

12.7

71

19.1

90

19.1

90.5

25.4

127.0

1/2

2-13/16

3/4

3-9/16

3/4

3-9/16

1

5

mm
3

---

87.3

38.1

4

6X4, 8X4

111.1

50.8

6

8X6, 12X6

177.8

50.2

8

10X8

203.2

76.2

3

---

3.4375

1.5

4

6X4, 8X4

4.375

2

6

8X6, 12X6

7

2

8

10X8

8

3

Inches

Table 5. Fisher EZ-C Port Diameters, Valve Plug Travel, and Stem and Yoke Diameters
VALVE
SIZE, NPS
EZ-C

PORT DIAMETER, INCHES
Equal Percentage(1)

Quick Opening

Linear

MAXIMUM
PLUG
TRAVEL

VALVE STEM AND YOKE BOSS
DIAMETERS
Standard

Optional

Stem

Yoke Boss

Stem

Yoke Boss

9.5

54

12.7

71

12.7

71

19.1

90

3/8

2-1/8

1/2

2-13/16

1/2

2-13/16

3/4

3-9/16

mm
1

6.4, 9.5, 12.7, 19.1, and 25.4

25.4

25.4

1-1/2

6.4, 9.5, 12.7, 19.1, 25.4, and 38.1

38.1

38.1

2

6.4, 9.5, 12.7, 19.1, 25.4, and 50.8

50.8

50.8

29

3

50.8 and 76.2

76.2

76.2

38

4

50.8 and 101.6

101.6

101.6

51

1

0.25, 0.375, 0.5, 0.75, and 1

1

1

1-1/2

0.25, 0.375, 0.5, 0.75, 1, and 1.5

1.5

1.5

2

0.25, 0.375, 0.5, 0.75, 1, and 2

2

2

1.125

3

2 and 3

3

3

1.5

4

2 and 4

4

4

2

19

Inches
0.75

1. 6.4 through 19.1 mm (0.25 through 0.75 inch) port diameters use Micro-Form valve plugs.

Table 6. Bolting Materials
VALVE

ET-C, EWT-C, and EZ-C
1. Standard stud and nut combination.

8

BODY-BONNET BOLTING
Studs

Nuts

SA-193-B8M(1) Strain Hardened

SA-194-8M(1)

S20910 (XM-19)

SA-194-8M
SA-194-8MA

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Table 7. Fisher EZ-C Maximum Allowable Pressure Drop for N06600/Graphite Spiral Wound Gasket (NPS 1 and 1-1/2
Valve Size) (Flow Up Only)(1)
BAR(2)
EZ-C Valve Size, NPS

TEMPERATURE,
_C(3)

1

1-1/2
Port Diameter, mm

6.4

9.5

12.7

19.1

25.4

6.4

9.5

12.7

19.1

25.4

38.1

-198 to 93

94.5

96.2

97.9

104.1*

114*

77.9

79.0

80.0

82.7

87.6

105*

93

89.6*

91.4*

93.1*

98.6*

108*

73.8

74.5

75.2

78.6

82.7

99.3*

149

85.5*

87.2*

88.9*

94.5*

103*

70.3

71.4

72.4

75.2

79.3*

94.5*

TEMPERATURE,
_F(3)

PSI(2)
1

1-1/2
Port Diameter, Inches

0.25

0.375

0.5

0.75

1

0.25

0.375

0.5

0.75

1

1.5

-325 to
100

1370

1395

1420

1510*

1660*

1130

1145

1160

1200

1270

1520*

200

1300*

1325*

1350*

1430*

1570*

1070

1080

1090

1140

1200

1440*

300

1240*

1265*

1290*

1370*

1500*

1020

1035

1050

1090

1150*

1370*

1. EZ-C should not be used in flow down service including on-off applications.
2. Pressure drop cannot exceed maximum inlet pressure as indicated in the specification table on page 2.
3. Pressure drops at intermediate temperatures may be interpolated.
* Pressure drops are in excess of CL600 pressure ratings per ASME B16.34 for CF8M body material.

Table 8. Fisher EZ-C Maximum Allowable Pressure Drop for N06600/Graphite Spiral Wound Gasket (NPS 2 through 4
Valve Size) (Flow Up Only)(1)
BAR(2)
EZ-C Valve Size, NPS

TEMPERATURE,
_C(3)

2

3

4

Port Diameter, mm
6.4

9.5

12.7

19.1

25.4

50.8

50.8

75.2

50.8

101.6

-198 to 93

67.6

68.2

68.7

70.3

73.1

101*

69.6

97.2

65.5

114*

93

63.4

64.1

64.8

66.9

69.6

95.8*

66.2

92.4*

62.1

108*

149

60.7

61.4

62.1

63.4

66.2

91.7*

62.7

88.3*

58.6

103*

TEMPERATURE,
_F(3)

PSI(2)
2

3

4

Port Diameter, Inches
0.25

0.375

0.5

0.75

1

2

2

3

2

4

-325 to
100

980

985

990

1020

1060

1470*

1010

1410

950

1650*

200

920

930

940

970

1010

1390*

960

1340*

900

1560*

300

880

890

900

920

960

1330*

910

1280*

850

1490*

1. EZ-C should not be used in flow down service including on-off applications.
2. Pressure drop cannot exceed maximum inlet pressure as indicated in the specification table on page 2.
3. Pressure drops at intermediate temperatures may be interpolated.
* Pressure drops are in excess of CL600 pressure ratings per ASME B16.34 for CF8M body material.

9

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Table 9. Fisher ET-C and EWT-C Valve Dimensions
RAISED-FACE FLANGE

D

A

VALVE SIZE, NPS
CL150

Stem Diameter, mm (Inches)

G

CL300

CL600

12.7 (1/2)

19.1 (3/4)

25.4 (1)

mm
3

298

318

337

97

533

533

---

4

353

368

394

129

533

533

---

6X4

451

473

508

135

568

568

---

8X4

543

568

610

176

570

570

---

6

451

473

508

140

---

762

762

8X6

543

568

610

183

---

797

797

12X6

737

775

819

254

---

865

865

8

543

568

610

191

---

762

762

10X8

673

708

752

273

---

762

762

Inches
3

11.75

12.50

13.25

3.81

21.00

21.00

---

4

13.88

14.50

15.50

5.06

21.00

21.00

---

6X4

17.75

18.62

20.00

5.31

22.38

22.38

---

8X4

21.38

22.38

24.00

6.94

22.44

22.44

---

6

17.75

18.62

20.00

5.50

---

30.00

30.00

8X6

21.38

22.38

24.00

7.19

---

31.38

31.38

12X6

29.00

30.50

32.25

10.00

---

34.06

34.06

8

21.38

22.38

24.00

7.50

---

30.00

30.00

10X8

26.50

27.88

29.62

10.75

---

30.00

30.00

Figure 3. Fisher ET-C and EWT-C Valve Dimensions (also see table 9)
MATCH LINE
FOR ACTUATOR

D

G
NOTE:
1

B=

54B8575-A
A6667

10

A
2

B
A

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Table 10. Fisher EZ-C Valve Dimensions
VALVE SIZE,
NPS

RAISED-FACE FLANGE

D

A
CL150

CL300

Stem Diameter, mm (Inches)

G
CL600

9.5 (3/8)

12.7 (1/2)

19.1 (3/4)
---

mm
1

184

197

210

61

535

549

1-1/2

222

235

251

71

535

548

---

2

254

267

286

78

---

533

533

3

299

318

337

97

---

535

535

4

353

368

394

129

---

535

535
---

Inches
1

7.25

7.75

8.25

2.38

21.06

21.62

1-1/2

8.75

9.25

9.88

2.81

21.06

21.56

---

2

10.00

10.50

11.25

3.06

---

21.00

21.00

3

11.75

12.50

13.25

3.81

---

21.06

21.06

4

13.88

14.50

15.50

5.06

---

21.06

21.06

Figure 4. Fisher EZ-C Valve Dimensions (also see table 10)
MATCH LINE
FOR ACTUATOR

D

G
NOTE:
1

A6667

B=

A
2

B
A

11

Product Bulletin

easy-e Cryogenic Valves

51.1:easy-e Cryogenic
August 2012

D102189X012

Figure 5. ENVIRO-SEAL Packing Systems
PACKING
BOX
STUDS

SPRINGS

PACKING
BOX
STUD

SPRINGS

ANTIEXTRUSION
RING

PACKING
RING
FOLLOWER
VALVE
BONNET

LANTERN
RING

W5803-3

PACKING

W8532-1

PTFE PACKING

GRAPHITE ULF PACKING

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher, easy-e, ENVIRO-SEAL, Whisper Trim, WhisperFlo, and Cavitrol are marks owned by one of the companies in the Emerson Process Management
business unit of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric
Co. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com
E
121995, 2012 Fisher Controls International LLC. All rights reserved.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.5.1 (Windows)
Modify Date                     : 2012:08:01 10:38:42-05:00
Create Date                     : 2012:08:01 10:38:12-05:00
Metadata Date                   : 2012:08:01 10:38:42-05:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:afe90f9d-073b-4bd3-abf3-fb99525c99e1
Instance ID                     : uuid:11539624-08dd-4c65-9a46-a99882c8b193
Page Count                      : 12

EXIF Metadata provided by EXIF.tools