Emerson Fisher Eu Data Sheet
2015-03-30
: Emerson Emerson-Fisher-Eu-Data-Sheet-680821 emerson-fisher-eu-data-sheet-680821 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Fisherr EU and EW Valves NPS 16 through 24 x 20 The Fisher NPS 16 through 24 × 20 CL150 through CL600 EUT-2, EWT-2, EUD, EWD, EUT, and EWT control valves (figures 3 and 4) are used for either throttling or on-off control of a wide variety of liquids and gasses. CL900 NPS 16 and 20 x 16 valves are available upon request. Please contact your Emerson Process Management sales office for more details. These valves have single ports, balanced valve plugs, and cage guiding. EUT-2 and EWT-2 valves with a hanging cage (figure 3) are available for demanding applications in oil and natural gas to 232_C (450_F). The hanging cage, with the seat ring threaded into the cage, gives these valves easy-maintenance trim--no trim parts are threaded into the valve body. The seal between the plug and cage and the seal between the seat ring and valve body are spring-loaded PTFE seals. EUD and EWD valves (figure 4) have a bolted-in seat ring. These valves have metal-to-metal seating and use two graphite piston rings between the valve plug and cage. They are used primarily for high temperature (over 232_C [450_F]) service. The Bore Seal is used to obtain Class V shutoff above 316_C (600_F). EUT and EWT valves (figure 1) have a bolted-in seat ring. These valves have metal-to-metal seating and use PEEK anti-extrusion rings to obtain temperatures up to 316_C (600_F). These valves share the following characteristics: multiple trim material choices, trim part interchangeability, and different cage styles to provide particular flow characteristics to handle specific applications. www.Fisher.com W9156-2 To help reduce aerodynamic noise in gas service, Whisper Trimt III (figure 5) and WhisperFlot cages are available. To eliminate liquid cavitation damage, Cavitrolt III cages are available. For cavitating liquids with particulate, DST (dirty service trim) is available. Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Specifications Valve Sizes EUT-2, EUD, and EUT: J NPS 16 and J 20 EWT-2, EWD, and EWT:J NPS 20 x 16, J 24 x 16, and J 24 x 20 valves (size designations are end connection size x nominal trim size) End Connection Styles Flanged: CL150, 300, and 600 raised-face or ring-type joint flanges per ASME B16.5 Buttwelding: All ASME B16.25 schedules through schedule 120 that are compatible with the ASME B16.34 valve body rating For other end connections, contact your Emerson Process Management sales office for details. Maximum Inlet Pressure(1) Flanged: Consistent with CL150, 300, and 600 pressure-temperature ratings per ASME B16.34 Buttwelding: Consistent with CL600 per ASME B16.34 Material Temperature and Pressure Drop Capabilities(1) See table 1 and figures 6 and 7. Shutoff Classifications per ANSI/FCI 70-2 and IEC 60534-4 EUT and EWT with Metal Seats Standard: Class V EUT-2 and EWT-2 with Metal Seats Standard (for all trims except 2-Stage Cavitrol Trim): Class IV Standard (for 2-Stage Cavitrol Trim): Class V Optional (for all trims except 2-Stage Cavitrol Trim): Class V EUT-2 and EWT-2 with Soft Metal Seats Class V EUD and EWD with Metal Seats Standard: Class III Optional: Class IV and V Construction Materials Valve Body and Bonnet: J WCC steel, J WC9 steel, J LCC steel, or J CF8M (316 stainless steel). For other materials, consult your Emerson Process Management sales office Trim and Other Parts: See tables 1, 2, and 3. Flow Characteristics Standard Cages:J Linear or J equal percentage Whisper Trim III and Cavitrol III Cages: Linear WhisperFlo Cages: Linear For other characteristics, contact your Emerson Process Management sales office for details. Flow Direction Standard and Cavitrol III Cages: Down Whisper Trim III Cages: Up WhisperFlo Cages: Up Flow Coefficients See Fisher Catalog 12 Port Diameters See tables 6 and 7 Valve Plug Travel 102 through 432 mm (4 to 17 inches). Contact your Emerson Process Management sales office for further details if needed Yoke Boss and Stem Diameters J 127 mm (5-inch) or J 127 mm (5H-inch) diameter yoke boss, each with 31.8 mm (1.25 inch) diameter valve stem Typical Bonnet Style Standard Plain (style 1 extension) Approximate Weights See figure 8 1. The pressure/temperature limits in this bulletin and any applicable standard or code limitation for valve should not be exceeded. 2 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Figure 1. Fisher EUT / EWT Valve with PEEK Anti-Extrusion Rings W9518-1 Features Stable Control at High Pressure Drops-- Rugged cage guiding stabilizes the valve plug at all points in its travel range. This guiding reduces vibration, mechanical noise, and the need for hydraulic snubbers. Economy-- Streamlined flow passages provide greater capacities per initial investment than most globe valves of the same size. Balanced valve plug design can allow use of smaller actuators for high pressure drops. Cost-Effective Operation-- Increased wear resistance of the standard hardened stainless steel trim means long-lasting service. Easy Maintenance-- The valve can stay in the pipeline during removal of trim parts for inspection or maintenance. 3 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Figure 2. Typical Fisher EUD with Bore Seal RETAINER PISTON RING CAGE A SEATING AREA PLUG FLOW DOWN RETAINER BORE SEAL PISTON RING CAGE W6022-2 SEATING AREA PLUG FLOW UP BORE SEAL VIEW A Bore Seal Description The Bore Seal (figure 2) is available for the EUD and EWD only and is required for Class V shutoff applications where the service temperature exceeds 316_C (600_F). For service temperatures below 316_C (600_F), the EWT and EUT should be used when Class V shutoff is required. See table 4 for availability and temperature limits and figure 2. The Bore Seal employs a metal Cshaped seal ring that 4 is secured to the outside diameter of the valve plug. When the valve plug comes into contact with the seat ring to close the valve, the Bore Seal is compressed against the cage wall, thereby blocking a secondary leakage path that exists between the plug and cage wall. When the valve plug is not in contact with the seat ring (i.e. valve open), the Bore Seal is not engaged and the piston rings that are also secured to the outside diameter of the plug assume the role of blocking this secondary leakage path. Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Figure 3. Typical Fisher EUT-2 or EWT-2 Valve TAPPED BONNET (OPTIONAL) BONNET GASKET CAGE GASKET HANGING CAGE DESIGN SEAT RING THREADED TO CAGE W6088-2 COMPLETE VALVE SEAT RING THREADED TO CAGE SEAL RING W6089-1A SEAT RING SEAL DETAIL 5 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Figure 4. Typical Fisher EUD or EWD Valve W6022-2 Figure 5. Fisher EWT-2 Valve with Whisper Trim III D3 Cage, Baffle, and Lower Metal Piston Ring BAFFLE CAGE W6202-2 6 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Table 1. Construction Materials PART Valve Body and Bonnet Cage, Seat Ring, and Valve Plug Valve Stem WCC Valve LCC Valve WC9 Valve _C -29 to 427 -20 to 800 -29 to 593 -20 to 1100 -198 to 593 -325 to 1000 -46 to 343 -50 to 650 See figures 6 and 7 CF8M See figures 6 and 7 S20910 SST Not a Limiting Factor SA-193-B7 Studs SA-194-2H Nuts SA-193-B7 Studs SA-194-2H Nuts SA-193-B7 Studs SA-194-2H Nuts S20910 CrCt Studs S20910 Nuts CF8M Valve B8M Class 2 studs 8M nuts SA-193-B7 Studs SA-194-2H Nuts S17400 N07718 Seat Ring Cap Screws Bonnet, Seat Ring, and Cage Gaskets EUD and EWD Piston Ring or Lower Graphite Piston Ring (254 mm [10 inch] port only) _F WCC Steel WC9 Steel CF8M (316 Stainless Steel) LCC See tables 2 and 3 Soft Metal Seat (with trim 233 in EUT-2 and EWT-2 valves only) Valve-to-Bonnet Bolting TEMPERATURE MATERIAL N06600/Graphite Graphite (Fisher Designation FMS 17F27) Graphite (Fisher Designation FMS 17F39) -29 to 427 -20 to 800 -46 to 343 -50 to 650 -29 to 427 -20 to 800 -198 to 538 -325 to 1000 -198 to 427 -325 to 800 -29 to 427 -20 to 800 -29 to 354 -198 to 593 -20 to 700 -325 to 1100 Oxidizing -198 to 427 -325 to 800 Non-Oxidizing -198 to 593 -325 to 1100 Oxidizing -198 to 427 -325 to 800 Non-Oxidizing -198 to 482 -325 to 900 Oxidizing -198 to 538 -325 to 1000 Non-Oxidizing -198 to 593 -325 to 1100 EUD and EWD Bore Seal N07718 -198 to 593 -325 to 1100 EUT-2 and EWT-2 Seat Ring Seal Ring and Plug Seal Ring N10276/Glass and Moly-Filled PTFE -73 to 232 -100 to 450 Not a Limiting Factor Not a Limiting Factor EUT and EWT valves with PEEK anti-extrusion rings For applications using a lower metal piston ring S41000 Backup ring S31600 Retaining ring 18-8 Seal ring PTFE/graphite with N10276 spring 232 to 316 450 to 600 Lower metal piston ring Iron / N07750 -73 to 427 -100 to 800 PTFE V-Ring -46 to 232 -50 to 450 PTFE Composition -46 to 232 -50 to 450 Oxidizing -198 to 354 -325 to 700 Non-Oxidizing -198 to 538 -325 to 1000 Packing (Temperatures shown are in-body temperatures with plain bonnet.) Packing Flange, Studs, and Nuts Packing Follower, Spring (PTFE V-Ring Packing), or Lantern Ring Packing Box Ring Graphite Ribbon/Filament Steel -29 to 427 -20 to 800 S31600 (316 Stainless Steel) -198 to 593 -325 to 1100 S31600 Not a Limiting Factor S17400 -101 to 427 -150 to 800 S31600 -198 to 593 -325 to 1100 7 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Table 2. Typical Combinations of Metal Trim Materials for All Valves Except Those with WhisperFlo Trim(1) Valve Design EUT-2, EWT-2 Trim Designation Seat Ring Cage Seat Ring Cap Screws 231(2) CA6NM HT CB7CU-1 H1075 CB7CU-1 H1075 --- 232(3) CF8M with CoCr-A on Seat and Guide CF8M with CoCr-A on seat CF8M ENC --- 226 CA6NM CB7CU-1 H1075 CB7CU-1 H1075 S17400 H1100 227A WC9 Steel with CoCr-A on Seat and Guide CF8M with CoCr-A on seat WC9 Nitrided N07718 229(3) CF8M with CoCr-A on Seat and Guide CF8M with CoCr-A on seat CF8M ENC N07718 229H(3) CF8M with CoCr-A on Seat and Guide CF8M with CoCr-A on seat CF8M Chrome-Coated N07718 EUD, EWD EUT, EWT Valve Plug Temperature See figure 6 See figure 7 231 CA6NM HT CB7CU-1 H1075 CB7CU-1 H1075 S17400 H1100 232(3) CF8M with CoCr-A on Seat and Guide CF8M with CoCr-A on seat CF8M ENC N07718 See figure 7 1. For WhisperFlo trims, see table 3. 2. Cavitrol III cage is standard with trim 231 3. NACE MR0175 approved trim materials. Table 3. WhisperFlo Metal Trim Materials and Valve Body/Trim Temperature Capabilities Valve Design Trim Designation Valve Plug Seat Ring Cage Seat Ring Cap Screws 952 CA6NM HT CF8M with CoCr-A on seat 410 SST/ ENC/Ultimet --- 953(1) CF8M with CoCr-A on Seat and Guide CF8M with CoCr-A on seat 316L SST/ ENC/Ultimet --- 950 CA6NM HT CF8M with CoCr-A on seat 410 SST/ ENC/Ultimet N07718 951(1) CF8M with CoCr-A on Seat and Guide CF8M with CoCr-A on seat 316L SST/ ENC/Ultimet N07718 952 CA6NM HT CF8M with CoCr-A on seat 410 SST/ ENC/Ultimet N07718 953(1) CF8M with CoCr-A on Seat and Guide CF8M with CoCr-A on seat 316L SST/ ENC/Ultimet N07718 EUT-2, EWT-2 EUD, EWD EUT, EWT Temperature See figure 6 See figure 7 See figure 7 1. NACE MR0175 approved trim materials. Table 4. Bore Seal Availability and Temperature Capabilities (EUD/EWD only) Valve Design Valve Size, NPS Trim Designation Temperature ANSI/FCI/IEC Shutoff Class See figure 7 V 226 EUD and EWD 16, 20x16, 24x16, 20, 24x20 227A 950 8 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Figure 6. Temperature and Pressure Drops for Typical Trim Used in Fisher EUT-2 and EWT-2 Valves FLUID TEMPERATURE, _C FLUID TEMPERATURE, _F FOR STANDARD METAL SEATING WITH CL600 WCC/LCC STEEL BODY MC140-1/AR 1 A6890 FLUID TEMPERATURE, _C FLUID TEMPERATURE, _F FOR STANDARD METAL SEATING WITH CL600 CF8M (316 STAINLESS STEEL) BODY Notes: 1 Do not exceed the maximum pressure and temperature for the class rating of the body material used, even though the trims shown may have higher capabilities. 9 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Figure 7. Temperature and Pressure Drops for Typical Trim Used in Fisher EUD, EWD, EUT, and EWT Valves FLUID TEMPERATURE, _C FLUID TEMPERATURE, _C 952, 953 231, 232 3 FLUID TEMPERATURE, _F FLUID TEMPERATURE, _F FOR STANDARD METAL SEATING WITH CL600 WCC STEEL BODY FOR STANDARD METAL SEATING WITH CL600 WC9 CHROME MOLY STEEL BODY FLUID TEMPERATURE, _C 229 229H 226 229 229H 226 229H 229H 951 229H FLUID TEMPERATURE, _F MC140-2/AR 1 A6891 Notes: 1 2 3 FOR STANDARD METAL SEATING WITH CL600 CF8M (316 STAINLESS STEEL) BODY 482_C (900_F) limit -- WCC steel valve plug 371_C (700_F) limit -- S17400 seat ring bolting 316_C (600_F) limit -- EUT and EWT valves with 231, 232, 952, and 953 trims Do not exceed the maximum pressure and temperature for the class rating of the body material used, even though the trims shown may have higher capabilities. 10 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Table 5. Dimensions and Approximate Weights APPROXIMATE WEIGHT (LONG-NECK VALVE(2) END CONNECTION Size, NPS Type(1) 16 RTJ RF BW RF 20 × 16 RTJ BW RF 20 RTJ BW RF 24 × 16 RTJ BW RF 24 × 20 RTJ BW Kg Lb 2540 5600 2270 5000 3540 7800 3130 6900 5220 11500 4810 10600 5220 11500 4630 10200 7710 17000 7120 15700 DIMENSION A CL150 Standard Plain Bonnet (Style 1 Extension) CL300 CL600 mm Inch mm Inch mm Inch 1016 40.00 1057 41.62 1108 43.62 1026 40.38 1073 42.25 1111 43.75 --- --- --- --- 1108 43.62 1267 49.88 1308 51.50 1372 54.00 1276 50.25 1327 52.25 1378 54.25 --- --- --- --- 1372 54.00 1267 49.88 1308 51.50 1372 54.00 --- --- --- --- --- --- --- --- --- --- 1372 54.00 1556 61.25 1600 63.00 1676 66.00 1565 61.62 1623 63.88 1686 66.38 --- --- --- --- 1676 66.00 1556 61.25 1600 63.00 1676 66.00 1565 61.62 1623 63.88 1686 66.38 --- --- --- --- 1676 66.00 Short-Neck Valve(2) G D Long-Neck Valve(2) Max. Travel D Max. Travel mm Inch mm Inch mm Inch mm Inch mm Inch 437 17.19 663 26.12 127 5.00 816 32.12 226 8.88 487 19.19 706 27.81 226 8.88 859 33.81 276 10.88 514 20.25 917 36.12 276 10.88 1121 44.12 378 14.88 526 20.69 816 32.12 226 8.88 1121 44.12 378 14.88 565 22.25 917 36.12 276 10.88 1121 44.12 378 14.88 1. RF--raised face; RTJ--ring-type joint; BW--buttwelding. 2. For longer travels, the neck of the valve (the portion of the valve body that supports the bonnet) is longer to accommodate the travel. The longer neck increases the D dimension. Figure 8. Dimensions and Approximate Weights (also see table 5) 25 (1.00) 31.8 (1.25) STEM DIAMETER MATCH LINE FOR 585C ACTUATORS AND 657, 667, SIZE 100 ACTUATORS MATCH LINE FOR ALL OTHER ACTUATORS D G A 2 A mm (INCH) A6068 11 Product Bulletin EU Valve 51.1:EU September 2014 D102004X012 Table 6. Port Diameters for Fisher EUT-2 and EWT-2 CL 150 through CL600 Valves Valve Size, NPS 16 20 × 16 24 × 16 20 24 × 20 TRIM PORT DIAMETER mm Inches Cast cages(1), WhisperFlo, and Cav III 374.7 14.75 Whisper Trim III A, B, and C 412.8 16.25 Whisper Trim III D 355.6 14.00 Cast cages(1), WhisperFlo, and Cav III 374.7 14.75 Drilled cages(1) and Whisper Trim III A, B, and C 412.8 16.25 Whisper Trim III D 355.6 14.00 Cast cages(1), WhisperFlo, and Cav III 374.7 14.75 Drilled cages(1) and Whisper Trim III A, B, and C 412.8 16.25 Whisper Trim III D 355.6 14.00 WhisperFlo and Cav III 463.6 18.25 Drilled cages(1) and Whisper Trim III A, B, and C 501.7 19.75 Whisper Trim III D 431.8 17.00 WhisperFlo and Cav III 463.6 18.25 Drilled cages(1) and Whisper Trim III A, B, and C 501.7 19.75 Whisper Trim III D 431.8 17.00 1. Linear or equal percentage. Table 7. Port Diameters for Fisher EUD, EWD, EUT and EWT CL 150 through CL600 Valves Valve Size, NPS TRIM 16 20 × 16 24 × 16 20 24 × 20 PORT DIAMETER mm Inches Linear; Equal Percentage; Whisper Trim III A, B, and C; WhisperFlo; and Cav III 374.7 14.75 Whisper Trim III D 355.6 14.00 Linear; Equal Percentage; Whisper Trim III A, B, and C; WhisperFlo; and Cav III 374.7 14.75 Whisper Trim III D 355.6 14.00 Linear; Equal Percentage; Whisper Trim III A, B, and C; WhisperFlo; and Cav III 374.7 14.75 Whisper Trim III D 355.6 14.00 Linear; Equal Percentage; Whisper Trim III A, B, and C; WhisperFlo; and Cav III 463.6 18.25 Whisper Trim III D 431.8 17.00 Linear; Equal Percentage; Whisper Trim III A, B, and C; WhisperFlo; and Cav III 463.6 18.25 Whisper Trim III D 431.8 17.00 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher, Whisper Trim, WhisperFlo, and Cavitrol are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Emerson Process Management Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Chatham, Kent ME4 4QZ UK Dubai, United Arab Emirates Singapore 128461 Singapore www.Fisher.com E 121992, 2014 Fisher Controls International LLC. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Create Date : 2014:08:14 08:20:30-05:00 Modify Date : 2014:08:14 08:21:08-05:00 Metadata Date : 2014:08:14 08:21:08-05:00 Producer : Acrobat Distiller 11.0 (Windows) Format : application/pdf Title : untitled Document ID : uuid:229de8ec-70c9-4ce2-96fa-c44f5e7eba09 Instance ID : uuid:1eef9d89-a8cd-4a1b-99c1-58efcf37a440 Page Count : 12EXIF Metadata provided by EXIF.tools