Emerson Fisher V500 Data Sheet
2015-03-30
: Emerson Emerson-Fisher-V500-Data-Sheet-680468 emerson-fisher-v500-data-sheet-680468 emerson pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisherr Rotary Valve Selection Guide W6539 W9418-2 W8172-3 V260 VALVE Vee-Ballt VALVE Control-Diskt VALVE TYPICAL Fisher ROTARY VALVES Control-Disk Valve Expanded control range, lower process variability Fisher Control-Disk Valve Vee-Ball Valves High-capacity, low-friction, non-clogging Fisher V150, V200, V300, and V150S High-Performance Butterfly Valves Outstanding performance under extreme pressure and temperature conditions, available for a variety of throttling or on/off applications Fisher 8510, 8532, 8580, 9500, and DSV Fisher POSI-SEALt A11, A31A, A31C, A31D, and A81 Pipeline Valves Eccentric Plug Valves Full- or reduced-bore ball valves for throttling and severe service applications in gas transmission lines, gas distribution, or liquid pipelines Designed for throttling control for a broad range of industrial applications Fisher V250 and V260 Fisher V500 and CV500 ENVIRO-SEALt live-loaded packing systems are available to assist in compliance with environmental emissions requirements FIELDVUEt digital valve controllers offer digital control and remote diagnostics. The traditional proven line of Fisher positioners, controllers, transmitters, and switches also is available. Spring-return pneumatic diaphragm and double-acting piston actuators Contact your Emerson Process Management sales office for details www.Fisher.com Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher Control-Disk Valve Figure 1. Fisher Control-Disk Valve W9421 Control-Disk VALVE Control-Disk Valve Applications Expanded control, lower process variability applications Style Wafer and single flange Sizes NPS 2, 3, 4, 6, 8, 10, 12 Ratings PN 10 to 40 CL150 and CL300 End Connections Raised-face (RF) Valve Body Materials EN: 1.0619 steel, 1.4409 stainless steel, CW2M, or M35-1 ASME: SA216 WCC steel, SA351 CF3M stainless steel, CW2M, or M35-1 Disk Material SA351 CF3M stainless steel Seal Types (Material) Soft (PTFE or UHMWPE) or metal (S31600) Flow Characteristics and Maximum Flow Coefficients Equal percentage Maximum Cv from 60.7 to 4530 Rangeability (Flow Coefficient Ratio) 100 to 1 Shutoff Class Soft Seal: Bubble-tight Metal Seal: 1% of Class IV Available Actuators (refer to page 11) Fisher 2052, 1051, 1052, and 1061 2 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher Vee-Ball Valves Figure 2. Fisher Vee-Ball Valves W74351 W8509 W5787 V150 and V300 VALVES V200 VALVE V150 AND V300 V200 V150S VALVE V150S Applications Excellent for fibrous slurries as well as liquids, gas, and steam. Shearing V-notch ball for smooth, non-clogging action. Excellent for fibrous slurries as well as liquids, gas, and steam. Shearing V-notch ball for smooth, non-clogging action. Highly wear-resistant trim materials and an unrestricted flow path make this design ideal for controlling the most abrasive of slurries. Sizes V150: DN 25 - 500 or NPS 1 - 24 x 20 V300: DN 25 - 500 or NPS 1 - 20 NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10 NPS 3, 4, 6, 8, 10, 12 Ratings V150: PN 10/16 or CL150 V300: PN 25/40 or CL300 CL150, CL300, or CL600 depending on size. CL150 End Connections Raised-face (RF) flanged Flangeless Raised-face (RF) flanged EN: 1.0619 steel, 1.4409 stainless steel, M35-1, or CW2M ASME: SA216 WCC steel, SA351 CF3M, CG8M stainless steel, M35-1, or CW2M Valve Body Materials EN: 1.0619 steel, 1.4409 stainless steel, M35-1, or CW2M ASME: SA216 WCC steel, SA351 CF3M, CG8M stainless steel, M35-1, or CW2M Ball Material SA216 WCC steel body liner: (high-chrome iron SA532 Class III Type A) SA351 CF3M, or CG8M stainless steel, CW2M SA351 CF3M or CG8M stainless steel, CW2M High-chrome iron SA532 Class III Type A (PSZ ceramic ball is optional) TCM Plus, metal (S31600), HD (heavy duty) metal, or flow ring TCM Plus, metal (S31600), HD (heavy duty) metal, or flow ring Seal Types (Material) Flow ring construction Flow Characteristics and Maximum Flow Coefficients Modified equal percentage Maximum Cv from 3.64 to 10,300 Modified equal percentage Maximum Cv from 8.4 to 3000 Modified equal percentage Maximum Cv from 170 to 2850 Rangeability 300 to 1 300 to 1 Shutoff Class Composition Seal: Class VI Metal Seal: Class IV Flow Ring Construction: 5% of wide-open capacity Composition Seal: Class VI Metal Seal: Class IV Flow Ring Construction: 5% of wide-open capacity Class I Available Actuators (refer to page 11) Fisher 2052, 1051, 1052, 1061, and FieldQt 3 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher High-Performance Butterfly Valves Figure 3. Fisher High-Performance Butterfly Valves W9498-2 W3542 W9138-2 8580 VALVE 8580 8532 VALVE 8532 8510 VALVE 8510 Applications Precise throttling service for process temperatures from -129 to 454_C Throttling service, high-temperature, and cryogenic applications; -196 to 816_C Wafer and single flange Wafer and single flange General-purpose valve for a variety of liquids and gasses Style Wafer and single-flange Sizes NPS 2, 3, 4, 6, 8, 10, 12 NPS 14, 16, 18 ,20, 24 DN 350, 400, 500, 600 NPS 14, 16, 18, 20, 24 Ratings PN 10 to 40 CL150 and CL300 CL150 and CL300 Raised-face (RF) Raised-face (RF) and ring-type joint (RTJ) PN 16 CL150 End Connections Raised-face (RF) Valve Body Materials EN: 1.0619 steel, 1.4409 stainless steel ASME: SA216 WCC steel, SA351 CF3M stainless steel High-alloy materials are available SA216 WCC steel or SA351 CF8M stainless steel High-alloy materials are available SA351 CF3M stainless steel SA351 CF8M stainless steel SA216 WCC steel or SA351 CF8M stainless steel High-alloy materials are available Disc Material SA216 WCC steel or SA351 CF8M stainless steel Seal Types (Materials) Soft (PTFE or UHMWPE) or metal (S31600) Soft (PTFE), NOVEX, and Phoenix III Soft (PTFE) or metal (S31600) Flow Characteristics and Maximum Flow Coefficients Approximately linear Maximum Cv from 83.7 to 5080 Modified equal percentage Maximum Cv from 4550 to 21,500 Approximately linear Maximum Cv from 7040 to 21,800 Rangeability 100 to 1 100 to 1 100 to 1 Shutoff Class Soft Seal: Class VI Metal Seal: 1% of Class IV Soft Seal: Class VI NOVEX Seal: SP-61 Phoenix III Seal: Class VI PTFE Seal: Bidirectional Class VI S31600 Seal: 1/10 of Class IV Available Actuators (refer to page 11) Fisher 2052, 1051, 1052, and 1061 4 Fisher 1051, 1052, and 1061 Fisher 2052, 1051, 1052, and 1061 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher High-Performance Butterfly Valves (continued) Figure 4. Fisher High-Performance Butterfly Valves (continued) W1628 W6094 DSV VALVE 9500 VALVE 9500 DSV Applications Fully lined butterfly valve for on/off or throttling service for tight-shutoff applications Rapid on/off, high-cycle applications; temperatures to 232_C Style Wafer Wafer Sizes NPS 2, 3, 4, 6, 8, 10, 12 NPS 4, 6, 8, 10, 12, 14 Ratings PN10, PN13, CL125B, CL150, or CL300 depending on size and material CL300 End Connections Cast Iron Bodies: Mate with PN 10 (NPS 2, 3, 6, 8, 10) or CL125B FF flanges Steel and Stainless Steel Bodies: Mate with PN16, CL150, CL300 RF flanges Mates with CL300 RF flanges Valve Body Materials Cast iron, carbon steel, S31600 stainless steel SA240 S31600 stainless steel Disc Material Aluminum bronze, S31600 stainless steel SA351 CG8M stainless steel Seal Types (Material) Fully lined nitrile or PTFE No seal Flow Characteristics and Maximum Flow Coefficients Approximately equal percentage through 90_ rotation for FISHTAILt disc and through 60_ rotation for conventional disc Maximum Cv from 91 to 7020 On/off service Maximum Cv from 434 to 7040 Rangeability 100 to 1 100 to 1 Shutoff Class Class VI 5% of valve capacity Available Actuators (refer to page 11) Fisher 2052, 1051, 1052, and 1061 Fisher 1061 5 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher POSI-SEAL High-Performance Butterfly Valves Figure 5. Fisher POSI-SEAL High-Performance Butterfly Valves W9529-2 A11 VALVES W9570-1 A11 Applications Throttling and automated on/off service, high-pressure, high-temperature, and cryogenic applications; -254 to 816_C Style Wafer and single flange Ratings and Sizes CL150/150 and CL150: NPS 30, 36, 42, 48, 54, 60, 66, 72 CL300: NPS 30, 36, 42, 48 CL600: NPS 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 30, 36, 42, 48 (CL300 trim available for NPS 3 through 48) CL900: NPS 6, 8, 10, 12, 14, 16 ,18, 20, 24, 30, 36 (CL300 and CL600 trim available for NPS 3 through 48) CL1500: NPS 10, 12, 14, 16, 18, 20 (CL300 and CL600 trim available for NPS 3 through 48, CL900 trim available for NPS 6 through 36) CL2500: Consult your Emerson Process Management sales office End Connections Raised-face (RF), ring-type joint (RTJ), and buttwelding ends (BWE) NPS 3 through 24 comply with ASME B16.5 NPS 30 through NPS 60 comply with MSS-SP-44 Valve Body Materials SA216 WCC steel or SA351CF8M stainless steel Other carbon steel, stainless steel, and high-alloy materials are available Disc Material CL150/150, CL150, and CL300: SA351 CF8M stainless steel or SA216 WCC steel CL600: SA351 CF8M stainless steel CL900 and CL1500: CB7Cu-1 Seal Types (Material) CL150 and CL300: Soft (PTFE), NOVEX (S31600), Phoenix III (S31600/PTFE), and cryogenic (CTFE) CL600, CL900, and CL1500: Soft (ETFE), Metal (S20910), high-pressure (S20910), Phoenix III (S31600/ETFE), and cryogenic (CTFE) Flow Characteristics and Maximum Flow Coefficients Maximum Cv from 182 to 106,000 Rangeability (Flow Coefficient Ratio) 100 to 1 Shutoff Class Soft Seal: Bidirectional bubble-tight (Class VI or better) NOVEX Seal: Class V (standard), Class VI (optional) Metal Seal: 20% of Class IV High-Pressure Seal: Class V (standard), Class VI (optional) Phoenix III Seal: Class VI Cryogenic Seal: 0.1% of Class IV Available Actuators (refer to page 11) Fisher 2052, 1051, 1052, 1061, FieldQ, and Bettist 6 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher POSI-SEAL High-Performance Butterfly Valves (continued) Figure 6. Fisher POSI-SEAL High-Performance Butterfly Valves (continued) W9461 W9134-2 A81 VALVE A81 A31A VALVE A31A A31D Applications On/off service, rack-and-pinion actuator for temperatures from -129 to 454_C On/off service, high-temperature and cryogenic applications; -196 to 816_C Wafer and single flange Wafer and single flange On/off and throttling service, high-temperature and cryogenic applications; -196 to 816_C Style Double flange Sizes NPS 2, 3, 4, 6, 8, 10, 12 NPS 14, 16, 18, 20, 24 NPS 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24 Ratings PN 10 to 40 CL150 and CL300 CL150 and CL300 Raised-face (RF) Raised-face (RF) and ring-type joint (RTJ) CL150 and CL300 End Connections Raised-face (RF) and ring-type joint (RTJ) Valve Body Materials EN: 1.0619 steel, 1.4409 stainless steel ASME: SA216 WCC steel, SA351 CF3M stainless steel High-alloy materials are available SA216 WCC steel or SA351 CF8M stainless steel High-alloy materials are available SA351 CF3M stainless steel SA351 CF8M stainless steel SA216 WCC steel or SA351 CF8M stainless steel High-alloy materials are available Disc Material SA351 CF8M stainless steel Seal Types (Material) Soft (PTFE or UHMWPE) or Metal (S31600) Soft (PTFE), NOVEX, or Phoenix III Soft (PTFE), NOVEX, or Phoenix III Flow Characteristics and Maximum Flow Coefficients Maximum Cv from 83.7 to 5080 Maximum Cv from 4550 to 21,500 Rangeability 100 to 1 100 to 1 100 to 1 Shutoff Class Soft Seal: SP-61 Metal Seal: SP-61 Soft Seal: Class VI NOVEX Seal: SP-61 Phoenix III Seal: Class VI Soft Seal: Bidirectional bubble-tight (Class VI or better) NOVEX Seal: Class V (standard); Class VI (optional) Phoenix III Seal: Class VI Available Actuators (refer to page 11) FieldQ Bettis Fisher 2052, 1051, 1052, 1061 and Bettis 7 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Cryogenic Butterfly Valves Figure 7. Fisher Cryogenic Butterfly Valves W7449 TYPICAL CRYOGENIC BUTTERFLY VALVE A31C A31C stainless steel cryogenic valves for liquified natural gas and other special chemical and hydrocarbon applications with temperatures to -254C 8532 A31A Applications 8532 stainless steel cryogenic valves A31 stainless steel cryogenic valves for liquified natural gas and other for liquified natural gas and other special chemical and hydrocarbon special chemical and hydrocarbon applications with temperatures to applications with temperatures to -254C. -254C. A11 A11 stainless steel cryogenic valves for liquified natural gas and other special chemical and hydrocarbon applications with temperatures to -254C. Style Wafer, single flange, and double flanged Wafer, single flange, and double flanged CL150 and CL300: NPS 3 - 12 CL150 and CL300: NPS 14 - 24 Raised-face (RF), ring-type joint (RTJ) Raised-face (RF), ring-type joint (RTJ) Wafer, single flange, and double flanged Wafer, single flange, and double flanged Ratings and Sizes CL150 and CL300: NPS 14 - 24 CL150/150, CL150, CL300: NPS 30 - 48 CL600: NPS 3 - 24 CL900: NPS 6 - 24 CL1500: NPS 10 - 20 End Connections Raised-face (RF), ring-type joint (RTJ) Raised-face (RF), ring-type joint (RTJ) Valve Body Materials SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel Disc Material SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel SA351 CF8M stainless steel Seal Types (Material) NOVEX and Cryogenic (CTFE and CTFE/aluminum) NOVEX and Cryogenic (CTFE and CTFE/aluminum) Maximum Cv from 188 to 4940 Maximum Cv from 4550 to 21,500 NOVEX and Cryogenic (CTFE and CTFE/aluminum) CL150 and CL300: NOVEX and Cryogenic (CTFE) CL600, CL900, and CL1500: HPS and cryogenic (CTFE) Flow Characteristics and Maximum Flow Coefficients Maximum Cv from 4550 to 21,500 Maximum Cv from 182 to 106,000 Rangeability 100 to 1 100 to 1 100 to 1 100 to 1 NOVEX Seal: Class VI Cryogenic (CTFE) Seal: 0.1% of Class IV Cryogenic (CTFE/Aluminum) Seal: Class VI NOVEX Seal: Class VI Cryogenic (CTFE) Seal: 0.1% of Class IV Cryogenic (CTFE/Aluminum) Seal: Class VI HPS: Class VI Shutoff Class NOVEX Seal: Class VI Cryogenic (CTFE) Seal: 0.1% of Class IV Cryogenic (CTFE/Aluminum) Seal: Class VI NOVEX Seal: Class VI Cryogenic (CTFE) Seal: 0.1% of Class IV Cryogenic (CTFE/Aluminum) Seal: Class VI Available Actuators (refer to page 11) Fisher 2052, 1051, 1052, 1061; FieldQ and Bettis 8 FieldQ and Bettis Fisher 2052, 1052, 1061; FieldQ and Bettis Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher Pipeline Valves Figure 8. Fisher Pipeline Valves W6365 W7169 V250 VALVE V260 VALVE V250 V260 Applications Heavy-duty, flangeless throttling ball valves. Often used for controlled flow Large, flanged throttling ball valves. Used for demanding pipeline applications in gas transmission lines, gas applications such as pump bypass and pipeline take-off. Temperatures from distribution, and liquid pipelines. Temperatures from -40 to 204C, -29 to 93C, depending on seal type depending on seal type Style Flangeless Flanged Sizes NPS 4, 6, 8, 10, 12, 16, 18, 20, 24 NPS 8, 10, 12, 16, 20, 24 Ratings CL600 or CL900 CL150, CL300, or CL600 End Connections Raised-face (RF) or ring-type joint (RTJ) Raised-face (RF) Valve Body Materials Carbon steel (LCC) Carbon steel (LF2) Ball Material Chrome-plated WCC steel Chrome-plated WCC steel Seal Types (Material) Single or dual seal (POM) or flow ring Single or dual (PEEK/PTFE or POM) Flow Characteristics and Maximum Flow Coefficients Modified equal percentage Maximum Cv from 499 to 18,300 Modified linear or modified equal percentage Maximum Cv from 4960 to 31,000 Rangeability 100 to 1 100 to 1 Shutoff Class Single and Dual Seal: Lass than 1% of Class IV Flow Ring: 1% of valve capacity Single or Dual Seal: Less than 10% of Class IV PEEK/PTFE Seal: Less than 10% of Class IV POM Seal: Lass than 10% of Class IV Available Actuators (refer to page 11) Fisher 1051, 1052, 1061, and Bettis Fisher 1051, 1052, 1061, and Bettis 9 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher Eccentric Plug Valves Figure 9. Fisher Eccentric Plug Valves W5793 W4170 V500 VALVE CV500 VALVE V500 CV500 Applications Rugged flanged or flangeless cammed-segmented V-notch ball valve offering erosion resistance and pressure control for gases, liquids, and fibrous slurries. Throttling or on/off. Temperatures from -198 to 538C, depending on materials. Flanged or flangeless eccentric plug rotary control valve for erosive, coking, and other hard-to-handle fluids. Throttling or on/off. Temperatures from -198 to 538C, depending on materials. Style Flanged or flangeless Flanged or flangeless Sizes DN 25 - 200 or NPS 1 - 8 DN 80 - 300 or NPS 3 - 12 Ratings PN 10 - 100 or CL150 - CL600 PN 10 - 100 or CL150 - CL600 End Connections Raised-face (RF) or ring-type joint (RTJ) Raised-face (RF) Valve Body Materials EN: 1.0619 steel or 1.4581 stainless steel ASME: WCC steel or CF3M and CF8M stainless steel WCC steel or 316 stainless steel Plug Material Chrome-plated CF8M, solid alloy 6, or ceramic CF3M stainless steel Flow Characteristics and Maximum Flow Coefficients Modified linear Maximum Cv from 12.2 to 1050 Modified equal percentage Maximum Cv from 181 to 3080 Rangeability 100 to 1 200 to 1 Shutoff Class Class IV Class IV Available Actuators (refer to page 11) Fisher 2052, 1051, 1052, 1061, and FieldQ 10 Fisher 2052, 1051, 1052, 1061, and FieldQ Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Fisher 2052, 1051, 1052, and 1061 Actuators Figure 10. Fisher Rotary Valve Actuators W9589 W3827 W3813 2052 ACTUATOR 2052 1051 AND 1052 ACTUATORS 1061 ACTUATOR 1051 AND 1052 1061 Features Heavy-duty actuator with enclosed linkage and splined actuator-valve connection for minimized lost motion Style Spring-return pneumatic diaphragm actuator Spring-return pneumatic diaphragm actuator Double-acting pneumatic piston actuator Typical Operating Torque Range (Varies with Operating Pressure and Construction) 50.8 to 565 NSm 85 to 1370 NSm 282 to 19,800 NSm Accessories Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital valve controllers, limit switches, position transmitters, handwheels, travel stops, lock-out device to disable actuator during maintenance, supply pressure filter-regulator. 11 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 FieldQ and Bettis GActuators Figure 11. Rotary Valve Actuators W9429 W8305 FieldQ ACTUATORS BETTIS G-SERIES ACTUATOR FieldQ ACTUATOR Bettis G Features Compact rack-and-pinion pneumatic actuator for quarter-turn applications for mounting to Fisher valves Scotch yoke type actuator for mounting to Fisher rotary valves. Style Double-acting or spring-return series single power module pneumatic actuator Double-acting or spring-return pneumatic piston actuator Typical Operating Torque Range (Varies with Operating Pressure and Construction) 40 to 2444 NSm 531 to 5650 NSm Accessories Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital valve controllers, limit switches, position transmitters, travel stops 12 Pneumatic or electro-pneumatic valve positioners, FIELDVUE digital valve controllers, limit switches, position transmitters, handwheels, travel stops, supply pressure filter-regulator Rotary Valve Selection Guide Product Bulletin D102550X012 40:002 January 2013 Alloy Valve Guidelines Emerson Process Management expertise has combined its knowledge of metals and foundry techniques with valve user experience in creating high alloy valves that fight corrosion successfully. Guidelines have been developed to help the valve user specify alloy valves correctly. Techniques have also been implemented that verify a foundry's ability to cast alloy valves properly and has established stringent specifications that guide the foundry in providing quality results. Valve user guidelines include: Avoid the use of alloy tradenames, Don't specify wrought for cast, Forego non-destructive testing. Steps used to qualify a foundry include: Weldability tests to gauge the foundry's ability to pour alloy materials, Dedicating casting patterns solely to high-alloy service. Stringent specifications developed by Emerson Process Management include: Raw Material Composition and Quality, Heat Qualification, Visual Inspection, Weld Repair, Heat Treatment, and Nondestructive Testing. 13 Product Bulletin Rotary Valve Selection Guide 40:002 January 2013 D102550X012 Figure 12. Typical Fisher Rotary Products W8755 W9418-2 DVC2000 14 DVC6200 on Control-Disk VALVE A complete line of actuators and accessories for the Fisher rotary valves is offered that meet your price/performance expectations FIELDVUE digital valve controllers are communicating, microprocessor-based controllers that use HARTr and FOUNDATIONt fieldbus protocols. Through digital communications, the controllers give easy access to actuator, valve, and instrument information that is critical to process operation ValveLinkt software and AMS Suite: Intelligent Device Manager allow you to care for and maintain equipment assets -- such as valves, transmitters, analyzers, motors, pumps, and plant unit equipment such as pipes, vessels, tanks, columns, reactors, digesters, etc. -- to improve yields and minimize downtime of industrial manufacturing processes. Contact your Emerson Process Management sales office for details Rotary Valve Selection Guide D102550X012 Product Bulletin 40:002 January 2013 15 Product Bulletin 40:002 January 2013 Rotary Valve Selection Guide D102550X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher, Vee-Ball, Control-Disk, POSI-SEAL, ENVIRO-SEAL, FIELDVUE, FieldQ, Bettis, FISHTAIL, and ValveLink are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Emerson Process Management Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Chatham, Kent ME4 4QZ UK Dubai, United Arab Emirates Singapore 128461 Singapore www.Fisher.com E 161998, 2013 Fisher Controls International LLC. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2013:01:08 15:49:28-06:00 Modify Date : 2013:01:08 15:50:04-06:00 Metadata Date : 2013:01:08 15:50:04-06:00 Producer : Acrobat Distiller 9.5.1 (Windows) Format : application/pdf Title : untitled Document ID : uuid:ec17d9c5-98b6-4a51-94c5-135ab64c7e14 Instance ID : uuid:e5c45bf1-9f4d-4271-ac37-dfdd04e8c41e Page Count : 16EXIF Metadata provided by EXIF.tools