Emerson ER100101 Owner's Manual R2.0 2017 03 02 File

User Manual: Emerson s - Owner's Manuals | Emerson Radio

Open the PDF directly: View PDF .
Page Count: 2

1

1

2

2

IMPORTANT NOTES

• Ope r a te c o n tro l s an d s wit c h es a s

described in the manual.

• Befor e t urning o n t he power, m ake

c e r t a i n t h a t t h e A C a d a p t e r i s

properly installed.

• When moving the set, be sure to first

disconnect the AC adapter.

• Avoid insta l l ing this u nit i n p l ace s

exposed to direct sunlight or close to

hea t radi a t ing appli a n ces such a s

electric heaters, on top of other stereo

equipm e nt that radia t es too much

heat, places lacking ventilation or dusty

a r e a s , p la ce s su b j e c t t o c o n s t a n t

vibration and/or humid or moist areas.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

pro v i de reaso n able prote c tion agai n s t h a r mfu l inte r f ere n c e i n a r e s ide n t ial

installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

int e r fer e n ce t o r a d io c omm u n ica t i ons . How e v er, there is n o guar a n tee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turni n g the equipme n t off a nd on, the u ser is encou r aged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Change s or modifica t i ons not e x p ressly a p proved by t he party r e sponsible for

compliance could void the user's authority to operate the equipment.

AM

1357

246

OWNER'S MANUAL

ER100101

Visit our web site at www.emersonradio.com

(U.S. Patent No. 6,567,344)

PLL AM/FM Radio

S m a r t S e t C l o c k R a d i o ,

With Auto-Time Setting System,

Dual Alarms,

®

PREPARATION FOR USE

• Remove the radio from the carton and remove all packing material from the

radio. We suggest that you save the packing material, if possible, in the unlikely

event that your radio ever needs to be returned for service. The original carton

and packing material is the only safe way to pack your radio to protect it from

damage in transit.

• Remove any descriptive labels or stickers on the front or top of the cabinet. Do

not remov e any l abe l s or s t ick e r s f r om t h e b a ck o r bot t o m o f the c abi n e t.

• Note the serial number on the bottom of your radio and write this number in the

space provided on the Warranty page of this manual.

• Place your radio on a level surface such as a table, desk or shelf, convenient

to an AC outlet, out of direct sunlight, and away from sources of excess heat,

dirt, dust, moisture, humidity, or vibration.

• Unwind the Line cord connecting the AC adapter and extend it to its full length.

The FM antenna is built in to this cord. It must be fully extended to provide the

best FM reception.

This model is e q uipped with n o n-skid r u b ber 'feet' to prevent the product f rom

moving when you operate the controls. These 'feet' are made from non-migrating

rubber material specially formulated to avoid leaving any marks or stains on your

furniture. However certain types of oil based furniture polishes, wood preservatives,

or c l eaning spra y s may cause t he rubber ' feet' to s often, and leave marks o r a

rubber residue on the furniture. To prevent any damage to your furniture we strongly

recommend that you purchase small self-adhesive felt pads, available at hardware

stores and home improvement centers everywhere, and apply these pads to the

bottom of the rubber 'feet' before you place the product on fine wooden furniture.

This radio is d e signed to o perate o n n ormal 120V 60Hz AC power only. Do not

attempt to operate the radio on any other power source. You could cause damage

to the radio that is not covered by your warranty.

Unpacking And Set Up

Protect Your Furniture

Power Source

LOCATION OF CONTROLS AND INDICATORS

This radio should be connected to an AC outlet that

is always 'live'. Do not connect it to an outlet that is

controlled by a wall switch. When the power to the

radio is interrupted, the built in lithium battery takes

over to maintain t h e time and a larm settin g s. To

maximize the life of the lithium battery keep the radio

connected to a 'live' AC outlet at all times.

OPERATING INSTRUCTIONS

®

IMPORTANT: The first time you connect your new SmartSet clock radio to the

AC outlet the internal computer will automatically set the time correctly for the

Eastern Time Zone, which is the initial default setting. The display will scan for a

few seconds and then show the correct Day and Time in the Eastern zone. If you

live in the Eastern Time zone, there's nothing else to do. Your clock is set correctly

and running.

If y ou do not l i ve in the E a stern Tim e zone you m u st change t he default zone

display to your own zone. You only do this one time and the Smart Set will remember

the new default zone setting and will always return to that setting after a power

interruption.

There are 7 time zones programmed into your Smart Set clock radio as follows :

ZONE 1 — Atlantic Time ZONE 2 — Eastern Time (Default Setting)

ZONE 3 — Central Time ZONE 4 — Mountain Time

ZONE 5 — Pacific Time ZONE 6 — Yukon Time

ZONE 7 — Hawaiian Time

To c h a n g e t h e d e f a u l t t i m e z o n e d i s p l a y,

depre s s the TIME Z O N E button. The n umber

"2" will appear on the display indicating that the

default zone is ZONE 2, Eastern Time.

.

®

®

Setting The Time, The First Time

PRÉCAUTION: Danger d’explosion si les piles sont remplacées de facon incorrect. Remplacer

les piles seulement par le méme type de pile ou l’équivalent.

Thank you for purchasing this Emerson SmartSet Dual Alarm Clock Radio.

This clock radio uses Emerson's patented Sma rtSet Automatic Time Setting S ystem.

The first time y ou c onnec t this cloc k radi o to y our AC o utlet , and after every powe r

interruption, w ithin seconds the clock will automatically set itself t o the co r r ec t Ye a r,

Month, D a t e , D a y, a n d Time. In addition a l l c h a n g e s from Standard Time to Daylight

Saving Time, and back to Standard Time, are made automatically.

There are dual alarms that can be set and used independentl y, and both of the alarms

can be programmed for everyday operation, weekdays only, or weekends only.

There is a long life lithium battery installed in this clock radio when you buy it.

This battery can maintain the time and alarm settings for 3 to 5 years, or even longer.

We have taken every prec aution to make sure this radi o was in perf ect working order

when it left our factory. If you encounter any problems with the set up or operation of th is

item, please call the Emerson Consumer Products Corp.,

Customer Service Hotline, toll free, at 1 -800-898-9020.

®

®

®

Date Display

Year Display

'Day of Week' Display

Daylight Saving and Leap Year Adjustments

Hold the TIME Z O N E button a nd then p r ess either the SET + ( u p) or – (down)

buttons until your own time zone appears on the display, then release the buttons.

The clock display will change to the correct time in the time zone you selected.

The clock will always return to the correct time in the zone you selected after every

power interruption.

If you move to a different time zone, simply change the default zone display to the

new zone and the SmartSet will remember that setting for you.

To see the correct date at any time, depress the MONTH/DATE button. The display

Changes from time to Month and Date (MM/DD).

For example, May 21st will appear as “ 5.21” .

When you release the MONTH/DATE button

the display returns to the correct time.

To see the correct year, depress the MONTH/DATE and TIME buttons together.

The display changes from time to year.

When you release the MONTH/DATE and

TIME buttons the display returns to the

correct time.

If t h e radio o r b uzzer is ' O ff ' , t o view the correct ' D a y of We e k ', depress the

WE E K butt o n . The dis p l ay w i ll chan g e fro m Time to “ D a y o f W e e k”. When

you release the WEEK button the display returns to the correct Time.

If t he r a dio or b u z zer i s ' O n', t o v i ew the c o rrec t 'D a y of W e e k ', press the

RADIO ON/OFF Button first to stop the radio or buzzer,

then depress the WEEK button, display will change

from Time to 'Day of Week'. When you release the

WEEK button the display returns to the correct Time.

Note: From d1,d2 to d7 stand for from Monday ,Tuesday to Sunday separately.

All D ayl i ght S avi n g and Leap Ye ar a d jus t m ent s a re m ade a uto m a tic a l ly b y

the SmartSet internal computer as follows:

• Start of Daylight Saving Time:

A t " 2 : 0 0 A M " o n t he 2 n d S u n d a y in M a r c h , th e c l o c k w il l au t o ma ti ca ll y

advance to "3:00 AM".

• End of Daylight Saving Time:

At '3:00 A M' o n the 1st S u nda y in N o v emb e r, t h e clo c k wil l auto m a tic a l ly

reset to "2:00 AM".

• Leap Year:

At "12 : 0 0 M i dni g h t" on F e b rua r y 28t h , the calen d a r d i spl a y wil l chan g e

to "2.29".

®

Manual Time Adjustments

Adjusting The Wake Up Times

Selecting The Alarm Week Mode

Some people like to set their clocks 5 to 10 minutes fast to make sure that they will

always be on time. Even though the SmartSet sets the time by itself, you still have

the option of adjusting the time manually if you wish.

To manually adjust the time display depress and hold the TIME button, and press

either the SET + or - buttons to adjust the time display ahead or back as desired.

Each press of the SET + or - buttons will change the display by one minute. If you

hold the SET + or - buttons the display will continue to change. The display will

change slowly at first, one minute at a time. But if you continue holding the SET +or

- buttons the display will change rapidly.

NOTE: If y o u ma n u a ll y adju s t the t im e , you r new s e tti n g is e n te r e d in t o t he

Smart S e t memory. If the p ower is i n t errupted, t h e display w i ll return t o your

new setting, not the original setting, when the power is restored.

Your SmartSet clock radio has two separate alarms that can be set and used

independently. You may use the alarms to wake two people at different times, or

you may use one alarm for weekdays and the other for weekend wake up times.

The procedure for adjusting the wake up time is the same for both Alarm 1 and

Alarm 2.

1.) Depress a n d hold eithe r the ALARM 1 or

ALARM 2 s etting b u tton. T he display will

change from the correct time to the Alarm 1

or Alarm 2 wake up time.

2.) While holdi n g the ALARM 1 or ALARM 2 s e tting butto n , depress e ither the

SET + or - button to move the display ahead or back to your desired wake up time.

3.) When the desired wake up time appears on the display, release the SET + or -

buttons.

NOTE: Be sure that you have set the wake up time correctly by observing the AM

indicator. If the AM indicator is 'On ' the wake up time is "AM". If the AM indicator is

'Off', the wake up time is "PM".

4.) When the desired wake up time (AM or PM) appears on the display, release the

ALARM 1 or ALARM 2 setting buttons.

Your SmartSet clock radio allows you to select from among three different alarm

operation modes for either alarm. The alarm modes are:

• Everyday ― the alarm will turn on all 7 days.

• Weekdays only ― the alarm will only turn on Monday through Friday;

• Weekends only ― the alarm will only turn on Saturday and Sunday.

To check the Alarm Mode setting for Alarm1, depress the ALARM 1 setting button.

The display will show the Alarm 1 wake up time and the DAY OF WEEK indicators

will show you the alarm mode which is selected.

®

®

®

®

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.

2.) Do not use this apparatus near water.

3.) Clean only with dry cloth.

4.) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong is provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7.) Protect the power co rd f rom being w alked on or pinched particular ly at plugs, convenien ce

receptacles, and the point where they exit from the apparatus.

8.) Only use attachments / accessories specified by the manufacturer.

9.) Unplug this apparatus during lightning storms or when unused for long periods of time.

10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

11.) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

12.) The apparatus shall not be exposed to dripping or splashing and that no

objects filled with liquids, such as vases, shall be placed on apparatus.

13.) Mains plug is used as disconnect device and it should remain readily

operable during intended use. In order to disconnect the apparatus from the

mains completely, the mains plug should be disconnected from the mains

socket outlet completely.

14.) Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type.

IMPORTANTSAFETY INSTRUCTIONS

Th is is CL AS S II ap pa rat us wi th doub le insu la ti on , and n o protective e ar th provided.

The Caution Marking and Rating plate are located at the bottom enclosure of the apparatus.

The e xcl a ma t ion p oin t w it h in

a n e q u ilat e r a l t r i a n gle i s i n -

t e n d e d t o a l e r t t h e u s e r t o

t h e p r e s e n c e o f i m p o r t a n t

o p e r a t i n g a n d m a i n t e n a n c e

( s e r v i c i n g ) i n s t r u c t i o n s i n

t h e l i t e r a t u r e a c c o m p a n y -

i n g t h e a p p l i a n c e .

The lightning flash with arrow-

he ad symbol, wi th in an equi-

la te ra l t ri an gle i s i nt en de d t o

alert the user to the presence

of uninsulated 'dangerous voltage'

within the product's e ncl osu re

t h a t m a y b e o f s u f f i c i e n t

magnitude to c ons tit ute a r isk

of e lec t ric s hoc k to p e rso ns.

WARN IN G: TO R ED UC E T HE R IS K OF

EL ECT RI C S HO O K D O N OT R EM O VE

COVER (OR BACK),NO USER SERVICEABLE

PA R TS I NS I DE R E F ER S E RV I C IN G TO

QU ALI FI ED S ER VI CE P ER SO NN E L.

AVI S:RISQUE DE C HOC

E L E C T R I Q U E -N E P A S O U V R I R

13.) Speaker (Top Cabinet).

14.) ALARM 1 Setting / Button.VOLUME +

15.) ALARM 2 Setting / Button. VOLUME -

16.) WEEK/ALARM MODE Button (Week-

day/ Weekends / Everyday Alarm).

17.) SET - / Button.TUNE -

18.) SET + / Button.TUNE +

19.) RADIO ON/OFF Button.

20.) SNOOZE / SLEEP / DIMMER OFF

Button.

21.) Back Up Battery Compartment

(Bottom Cabinet).

1.) (Alarm 1 'Buzzer') Indicator.

2.) (Alarm 1 'Radio') Indicator.

3.) AM Indicator.

4.) Time/Date Display.

5.) (Alarm 2 'Buzzer') Indicator.

6.) (Alarm 2 'Radio') Indicator.

7.) LOW BATT. Indicator.

8.) AC adapter (Back Cabinet).

9.) MONTH/DATE Setting / STORE

Station Button.

10.) TIME Setting / Select Button.BAND

11.) TIME ZONE / Button.MEMORY

12.) SLEEP Button (Sleep To Music Timer).

Note: For buttons displayed with additional font or icons, INVERSED

they have multiple function at different operation mode. Generally, the

functions displayed in font are for operation when Radio is ON.INVERSED

Front Panel

Top Panel

20

11

17

12

18

10

13

9

14

19

15

16

8

4

21

7

3

2

1

6

5

3123331

810 12 14

911 13 15

CR2032

POSITIVE(+)

The Serial Number can be found on the bottom cabinet. We suggest that you record

the Serial Number of your unit in the space below for future reference.

Model Number: ER100101

Serial Number: _______________ _ _ _ _ _ _ _ _ ______

Listening To The Radio

• it shows “1-7”, the Everyday mode is selected.

• If it shows “1-5”, the Weekdays only mode is selected .

• If it shows “6-7”, the Weekends only mode is selected.

To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button

and press the ALARM MODE button until the DAY OF WEEK indicators show the

desired mode setting, Weekdays only, Weekends only, or Everyday operation.

Releas e the ALARM M O DE and A L A R M 1 setting b uttons and the display w i ll

return to the correct time.

Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary.

Whenever you want to check the wake up time or the alarm mode settings, simply

press either the ALARM 1 or ALARM 2 setting buttons. The display will change

from correct time to wake up time and the DAY OF WEEK indicators will show you

the alarm mode which is currently selected.

Release the ALARM 1 or ALARM 2 setting buttons to return to correct time.

1.) Press the RADIO ON/OFF button to turn the radio 'On'. The frequency of the

tuning frequency will show for a few seconds on the display.

2.) Set the BAND by pressing button to AM or FM as the desired, it toggles BAND

each time you press the button.BAND

3.) Set the VOLUME by pressing or to a level that is neither VOLUME + VOLUME -

too high nor too inaudible.

4.) Select your desired station with the TUNING control.

a) Press or slightly, the receiving frequency will increment or TUNE + TUNE -

decrement by one step.

b) Press and hold or for one second then release, Auto Station TUNE + TUNE -

Seeking will be engaged, the receiving frequency will increment or decrement

automatically until a station with acceptable reception is found.

5.) Adjust the VOLUME control to the desired setting.

6.) When you are finished listening, press the RADIO ON/OFF button to turn the

radio 'Off'.

When you have a few favorite radio stations to listen to,you maylike to save them,

and pick one out of them in a few seconds without needing to search it each time.

Our digital tuning technology allows you to do this easily by following the following

steps:

Checking The Wake Up Times And Alarm Mode

Storing and Recalling Radio Station Memory

Recalling Station from the Memory

1.) Make sure the radio is ON and the AM/FM band is selected.

2.) Tune to the desired station by the TUNING control as described.

3.) Press , "P XX" blinks, indicating the memory location to store theSTORE

currently listening station.

4.) While "P XX" is blinking, press or can change the memoryTUNE +TUNE –

location from 1 through 10. For e.g .,"P 03" means the current listening

station is about to stored into the 3rd location of the memory.

5.) After deciding the memory location, press again, the currently listening STORE

station is stored.

6.) The display will turn to the frequency of the stations afterwards, and after

a few seconds, the correct time shows.

1.) Make sure the radio is ON and the AM/FM band is selected.

2.) Press MEMORY , "P XX" shows on the display, and the station according to the

memory location is tuned.

3.) While "P XX" is showing on the display, press or can change TUNE + TUNE –

the memory location from 1 through 10, and the station stored in the location

is tuned once the location is changed to.

4.) The display will turn to the frequency of the stations afterwards, and after a

few seconds, the correct time shows.

AM - The AM bar antenna is inside the cabinet. If AM reception is weak, change

the position of cabinet until the internal antenna picks up the strongest signal.

FM - The FM antenna is built in to the Line cord connecting the AC adapter.

If FM reception is weak try Varying the position and direction of the Line cord

until you find the strongest signal.

NOTE: Alarm 1 and Alarm 2 have different buzzer sounds.

• Alarm 1 is a "Single beep" sound. • Alarm 2 is a "Double beep" sound.

You will be able to tell whi ch alarm is going off by the sound t hat i t makes.

1 .) Reconfirm the wake up time and alarm mode settings for the alarm you are

using, Alarm 1,Alarm 2, or both alarms.

2.) Press ALARM 1 or ALARM 2 button slightly, and repeat doing so if necessary,

until ALARM 1 "BUZZER" or ALARM 2 "BUZZER" indicator is lit on the display.

3.) At t he selected w a ke up time the buzzer will sound. It will continue for one

hour and then shut off automatically.

4.) To stop the buzzer sooner, press the RADIO ON/OFF button. The buzzer will

stop but the alarm remains set and will turn the buzzer on again at the same

time on the following day (depending on the Alarm Mode setting).

5.) If you do not want the alarm to turn the radio on the following day, press the

appropriate ALARM button until the ALARM indicator on the display is OFF.

Storing to the Memory

Antenna Information

Wake To BUZZER

If the lithium battery is exhausted and you experience an interruption in the AC

power supply, the clock will reset itself to its initial default setting when the power is

restored.

CARE AND MAINTENANCE

If t h e cabinet becomes d u sty, w i pe it with a soft cloth. I f the cabine t b ecomes

smudged or dirty, clean it with a soft, slightly dampened cloth .

N e v e r a l l o w w a t e r o r a n y l i q u i d t o g e t i n s i d e t h e c a b i n e t . N e v e r u s e a n y

abrasive cleaners or cleaning pads as these will damage the finish of your radio.

• Di s p o se o f t h e o l d b a tte r y pro p e rly. D o no t leav e it l y in g arou n d w he r e a

young c h i ld or pet c o uld play w i th ,or s w a l low it. I f the batter y i s swallowed .

contact a physician immediately.

• B a t t e r y m a y e x p l o d e i f m i s t r e a t e d . D o n o t a t t e m p t t o r e c h a r g e i t o r

disassemble it. Do not dispose of the old battery in a fire.

Care Of Cabinets

Lithium Battery Precautions

ER100101-20170302-00 Printed in China

Radio And Buzzer Operation

Snooze/Repeat Alarm

Sleep To Music Timer

You may also set one alarm for wake to RADIO and the other for wake to BUZZER.

Just press the ALARM 1 and ALARM 2 buttons to the desired status as shown on the

ALARM indicators.

After the alarm turns 'On' in the morning you can SNOOZE/SLEEP OFF button on

the top cabinet for a few extra minutes sleep. The corresponding ALARM indicator

will flash. The alarm will stop for approximately 9 minutes and then comes 'On' again.

The Snooze operation may be repeated several times if desired but after one hour

the alarm will not come on again.

You can program the sleep timer to play the radio for up to 90 minutes and then shut

'Off' automatically.

1.) Press the SLEEP button.The display will briefly

show "10" and the radio will begin to play.

After 10 minutes countdown the radio will shut

off automatically. Each time you press the SLEEP button the sleep timer will

start at 10 minutes. This is the sleep timer default setting.

2.) To i ncrease o r decrease t he amount o f time that t h e radio w i l l play befor e

shutting off, hold the SLEEP button and press either the SET + or - button to

change the display to the desired sleep time, up to a maximum of "90" minutes

or a minimum of "02" minutes.

NOTE: When you change the sleep timer from the 10 minute default setting to a

different setting, the new setting becomes the default setting. Whenever you

activate the sleep timer it will begin with your new default setting and count down

to zero from that point.

3.) To cancel the sleep timer before it counts down to '00' and shut the radio 'Off'

immediately, press the SNOOZE/SLEEP OFF Bar.

DIMMER Control

Changing The Lithium Battery

IMPOR TANT: R emember t h at the stati o n and volume s e ttings y o u choose f o r

the Sleep To Music operation are the same settings you will hear if you set the

alarm for Wake To Radio the following morning.

The DIMMER control was set to High position at our factory.

If you find the clock display is too bright in a darkened room, set the Dimmer by

pressing SNOOZE / SLEEP / DIMMER Button.OFF

Like all batteries, eventually the built in lithium battery will need to be replaced. A

numbe r o f factors, such as, t he length o f time betwe e n the date t h e radio w a s

manufactured and the date you plugged it in for the first time determine the amount

of time before replacement. During this initial storage period, the lithium battery is

IMPORTANT NOTE

Resetting The Clock After A Total Memory Loss

®

If you do not change the built in lithium battery within a reasonable period of time

after you see the warning indicator, the lithium battery may become exhausted

a n d w i l l n o l o n g e r b e a b l e t o s u p p l y b a c k u p p o w e r t o t h e S m a r t S e t

internal computer. If the unit is disconnected from the AC outlet after the battery

is exhausted or if a power interruption occurs, the SmartSet memory will be lost

and the clock will need to be reset when the power is restored.

Be sure to install a fresh lithium battery before you reset the clock, otherwise the

clock will need to be reset each time the power is interrupted.

The initial default setting is "12:00 AM, Sunday , January 1st (1. 1), 2012".

If you notice that the time on your SmartSet clock radio is completely incorrect,

and the DAY OF WEEK indicator is also wrong, press the MONTH/DATE button to

see the date.

If the date display is showing "1. 1 " (January 1st),

you p robably e x perienced a total memo r y loss.

To reset the clock after a total memory loss, proceed

as follows:

1 .) Follow the instructions on page 10,11 and install a new CR2032 lithium battery

in the battery compartment.

2.) Connect the radio to your AC outlet and let the clock set itself.

3.) Depress the MONTH/DATE and TIME buttons together. The display will change

from 'Time' to 'Year'.

Whi l e ho l d ing in t h e M O NTH / D AT E a n d TI M E b utt o n s, p res s the S E T +

button to set the display to the correct year, then release the buttons.

4.) D e pre s s the M ON T H / DATE b utt o n . The disp l ay w ill chang e from 'Ti m e'

t o 'Month/Date' (MM/DD).

While holding in the MONTH/DATE button, press the SET + button to set the display

to the correct Month and Date. The DAY OF WEEK indicator will change automatically

as you adjust the Month/Date settings. When the correct Month and Date appear

on the display, release the buttons.

5.) Depress the TIME button and the SET + button to set the display to the correct

Time. Be sure to confirm that you have set the time correctly to 'AM' or 'PM'

b y observing the AM indicator.

6.) After you set the Time, reconfirm that the Day, and Month/Date displays are

still correct. Make final adjustments if necessary.

The SmartSet clock memory is now reset and the new lithium battery will maintain

it for the next 5 to 8 years, depending on the number and duration of the power

outages you experience.

Af t e r re s e t ti n g the c loc k , don ' t for g e t t o res e t you r wake u p t i m es a nd a l ar m

mode settings, and sleep timer settings as well.

®

®

®

LIMITED WARRANTY

Emerson Radio Corp. warrants this product to be free from manufacturing defects in

original material, including original parts, and workmanship under normal home use

and conditions (“manufacturing defect”) for a period of ninety (90) days from date of

original purchase in, and if used in the United States. Should service be necessary

under this warranty, Emerson will provide the following at our Return Repair Facility

provided the manufacturing defect is verified along with the date of purchase:

* Repair service for ninety (90) days from date of original purchase at no charge for

labor and parts.

To Receive Authorizat i o n to Return a Defective I tem, please c o ntact Emers o n

Customer Service at 1-800-898-9020. Have your Model number, Serial Number and

dated Proof of Purchase with you when you call.

In the event the product must be returned to Emerson:

* Pack the unit in a well-padded heavy corrugated box. Please insure the item is well

padded to avoid damage while in transit back to our facility. If the item incurs damage,

it will NOT be replaced and the consumer will be responsible for return freight costs

to receive their same unit back.

* Enclose your check or money order payable to Emerson Radio in the amount of $10

to cover return shipping and handling costs.

* Enclose a note with your name, address, phone number, Return Authorization

number and brief reason for returning the unit.

* Enclose a copy of your proof of purchase (warranty service will not be provided

without dated proof of purchase).

* Ship the unit prepaid via UPS or parcel post (SHIP INSURED and obtain a tracking

number).

NOTE: This warranty does not cover:

(a) Damage to equipment not properly connected to the product.

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL

PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT.

A N Y A P P LI C A B L E I M P L I ED WA R R A N TI E S , INC L U D I N G T HE WA R R A N TY OF

MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESSED

WARRA NTY AS PR OVIDE D HERE IN BE GINNI NG WI TH TH E DATE O F ORI GINAL

PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED,

SHALL APPLY TO THE PRODUCT THEREAFTER. EMERSON MAKES NO WARRANTY AS

TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.

THE EXTENT OF EMERSON RADIO CORP'S LIABILITY UNDER THIS LIMITED WARRANTY

IS THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL

EMERSON RADIO CORP'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE

PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES SHALL EMERSON

RADIO CORP. BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE

OF THIS PRODUCT. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. HOWEVER, YOU MAY HAVE

OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. SOME STATES DO NOT

ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL

DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.

10-90-1402A

(b) Cost incurred in the shipping of the product to and from Emerson's Return Facility.

(c) Damage o r improper operation of unit c a u sed by custo m er abuse, m isuse,

negligence or failure to follow operating instructions (including cleaning instructions)

provided with the product.

(d) Ordinary adjustments to the product which can be performed by customer as

outlined in the owner's manual.

(e) Signal reception problems caused by external antenna or cable systems.

(f ) Products not purchased in the United States.

(g) Damage to product if used outside the United States.

Emerson Part No.

supplying power to the SmartSet computer memory. Once you plug the radio in,

your household outlet supplies the power, and the battery is not being used. A fresh

lithium battery can supply power to the SmartSet computer for at least 3 years even

if it is never connected to an AC power supply. If your clock radio was connected to

your AC supply within a few months after it was manufactured, and you experience

only the normal, nuisance type, short duration power interruptions, your battery may

last for up to 5 years or even longer.

When the battery power drops below a certain level,the LOW BATT.indicator

will 'Flash'. When you see this indicator, you should change the battery as soon as

it is convenient for you to do so. To change the battery proceed as follows:

1.) Purchase a replacement 3V lithium battery wherever batteries are sold . The

battery type is CR2032 or equivalent.

2.) Remove the battery from its package so it is ready to install.

BE CAREFUL NOT TO LOSE THIS SMALL SCREW!

®

®

®

IMPORTANT: Leave the AC adapter connected to your AC outlet.

This wi ll p rov ide power to t he SmartSet com put er memory wh ile t he original

lithium battery is removed.

3.) Turn the radio face up and use a small screw driver to remove the screw securing

the battery holder to the cabinet.

4. ) Remove the original battery from the holder and insert the new battery into the

holder the same way, observing the positive (+) direction. Slide the holder with

the new battery back into the slot in the cabinet.

5.) Replace the screw that secures the battery holder in the cabinet.

6.) Turn the radio right side up and confirm that the LOW BATT indicator is 'Off'.

7.) Save these instructions. You'll have to do this again five to eight years from Now!

WARNING: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.