Emkay Innovative 5615HS A WIRLESS HANDSET SYSTEM User Manual

Download:
Mirror Download [FCC.gov]
Document ID	84609
Application ID	dvKURktwYOQf+KuFnLsntQ==
Document Description	USER MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	4.59kB (57345 bits)
Date Submitted	2000-02-01 00:00:00
Date Available	2000-02-15 00:00:00
Creation Date	2001-04-12 08:31:37
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-04-12 08:31:38
Document Title	USER MANUAL

RF-5615
OPERATING INSTRUCTIONS
The RF-5615 is a single channel, full-duplex radio frequency wireless headset microphone, with
a range greater than 25 feet.
The RF-5615 Wireless Headset System Includes:
Headset
Base Station
DC 9V Adapter
Audio Cable
Phone Line (2)
Phone Jack Splitter
Spare Battery
To prepare to use your system you must first charge the headset battery in the Base Station.
Make sure you have all the components listed on the above list and proceed through the step-bystep instructions.
Step 1.
Base Station Location
The Base Station should be accessible for charging your headset and spare battery. Suggested
location: to the side of your computer with line-of-sight to your headset. Please allow four
inches separation between the Base Station and your monitor or CPU if possible.
Step 2. Connections
i.
Wall Adapter:
ii.
Audio Cable:
Plug the DC Adapter plug into the jack marked 9V DC on the base
station and the transformer into the AC wall outlet.
Connect the red Microphone plug into the jack marked PC MIC on the
base station, and the plug the other end into the microphone jack of your
the speaker jack of the soundcard on your computer.
Note: If you want to use your external speakers, plug the external speakers into the jack of the Base Station
iii.
Telephone:
1.)
2.)
3.)
Unplug your telephone line from your phone and plug it into the
Plug one of the black Phone Lines into a slot of the Phone Jack
Plug the last black Phone Line into the remainging Phone Jack
Step 3. Operation
i.
CONFIRM ALL SWITCHES ARE IN CORRECT POSITION.
labeled
ii.
Computer:
When using the headset for computer use, you can put the slide switch on
O - Off/Charge
I - Microphone Only
II - Microphone and Speaker
iii. Telephone:
button again.
To make a telephone call, push down on the TEL/PC
silver button
Note: When you make a telephone call, your computer microphone connection becomes muted. The computer
iv. Volume:
You can adjust the speaker volume by turning the silver VOLUME
v. Ext. Speaker: If you want to use your external speaker, push the PC/EXT button
headset speaker, push the same PC/EXT button again,
and the
headset option is recovered.
vi. Charging:
The headset battery charges when the headset is placed into the Base
allow eight hours for complete charging.
Step 4. Headset Overview
Your lightweight headset is designed for extended periods of comfortable wear. Simply place
your ear through the loop, and slowly release the headband until the temple piece rests on the
opposite side of your head. The unique design allows for right or left side preference. Simply
adjust the earloop and microphone boom left or right (180 ) to select side preference (clockwise
for right, counter-clockwise for left). You will also notice that the headband adjusts up or down
for a more comfortable fit. The optimum microphone position should be about 10mm (thumb s
width) distance from the side of your mouth and the tip of the microphone boom.
microphone is rec

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:04:12 08:31:37
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:04:12 08:31:38-04:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools