Emtek 2018 Multi Point Lock Trim Price Book

User Manual: Emtek 2018 EMTEK Multi Point Lock Trim Price Book Price Book

Open the PDF directly: View PDF .
Page Count: 52

Download
Open PDF In Browser	View PDF

2017 2018
MULTI POINT LOCK TRIM
PRICE BOOK

ASSA ABLOY, the global leader
in door opening solutions

EMTEK MULTI POINT LOCK TRIM FOR SWINGING PATIO DOORS

CHOOSE TRIMSETS FROM 7 DOOR & LOCK CONFIGURATIONS, AVAILABLE IN BOTH KEYED AND NON-KEYED FUNCTIONS

> > To determine your Multi-Point Lock configuration:
1) Identify the manufacturer of your patio door and multi-point lock
2) Measure the center-to-center hole spacing between the lever and the cylinder
3) Check the lever position: is it above or below the cylinder?
4) Identify the type of cylinder used in the door: is it American or Euro Profile Cylinder?

PAGE

Door Configuration #1

American Cylinder Hub Below Handle, 35⁄8” Center to Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen®,
Marvin Integrity®, Paddock Lockmaster™, Superior®

Door Configuration #2

American Cylinder Hub Above Handle, 35⁄8” Center to Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Door Configuration #3

American Cylinder Hub Above Handle, 41⁄8” Center to Center
ref. Andersen®

Door Configuration #4

American Cylinder Hub Above Handle, 35⁄8” Center to Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom
Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection
(formerly Norco®), Weathershield®

PAGE

Door Configuration #5

Euro Profile Cylinder Below Handle, 35⁄8” Center to Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®,
Loewen®, Paddock Lockmaster™, Peachtree®, Semco®, Sierra
Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®,
Windsor®, Weathershield®

Door Configuration #6

American Cylinder Hub Below Handle, 35⁄8” Center to Center
ref. Milgard®, Pella®

Door Configuration #7

American Cylinder Hub Above Handle, 6” Center to Center
ref. Trillenium® (formerly W&F Manufacturing)

Product Index
Order Form
Lifetime Limited Warranty

49
50
51

IN-SWING
DOOR

LEFT
(LH)

IN-SWING
DOOR

RIGHT
(RH)

OUT-SWING
DOOR

LEFT
(LH)

RIGHT
(RH)

HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE

Multi Point Lock Trim Price Book
Effective October 16, 2017

HANDING

Determining handing for door hardware is different than determining handing for carpentry (ordering and
hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the
diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the
diagram below and if you have any questions, call Customer Service at (800) 356-2741.

CLASSIC
DESIGNER**

LEVER OPTIONS

Solid Brass

Cortina Lever
(C)

Coventry Lever
(CV)

Milano Lever
(M)

Elan Lever
(EN)

Rustic Lever
(R)

Merrimack Lever
(ME)

Turino Lever
(T)

Ribbon & Reed Lever
(RBL)

Rope Lever
(RL)

Santa Fe Lever
(SF)

Wembley Lever
(WM)

** Flat Black (US19) NOT available for Designer Levers.
Modern Brass

Aireon Lever
(A)

Argos Lever
(AG)

Athena Lever
(ATN)

Basel Lever
(BA)

Geneva Lever
(GV)

Helios Lever
(HLO)

Hercules Lever
(HEC)

Hermes Lever
(HER)

Luzern Lever
(LU)

Mercury Lever
(MC)

Poseidon Lever
(POS)

Sion Lever
(SIO)

Stuttgart Lever
(STU)

Triton Lever
(TRT)

Stainless Steel

Athena Lever
(AT)

Cologne Lever
(CO)

Dresden Lever
(DD)

Kiel Lever
(KL)

Poseidon Lever
(PO)

Stuttgart Lever
(STT)

Aurora Lever
(AR)

Cimarron Lever
(CR)

Cody Lever
(CD)

Teton Lever
(TT)

Yuma Lever
(YM)

Helios Lever
(HL)

Hercules Lever
(HS)

Hermes Lever
(HES)

Sandcast Bronze

Durango Lever
(D)

Lost Wax Cast Bronze

Medici Lever
(MDI)

* For Single Door Application Only.

Napoli Lever
(NA)

Octagon Lever
(OCL)

Padua Lever
(PD)

Lariat Lever
(LR)

Montrose Lever
(MT)

Satin Brass
(US4)

French Antique
(US7)

Oil Rubbed Bronze
(US10B)

Satin Nickel
(US15)

Pewter
(US15A)

Flat Black
(US19)

Polished Chrome
(US26)

Flat Black Bronze
Patina (FB)

Medium Bronze
Patina (MB)

Bronze Patina is a living finish that will

gracefully age, revealing the underlying bronze
over time. Because of this characteristic, no finish
warranty is offered on bronze patina products.

Brushed Stainless
Steel (SS)

Unlacquered Brass (US3NL) is a custom,
made-to-order finish. It is available with an
upcharge, per item and requires an additional 2-3
day lead time. This living finish will gracefully age
and evolve in appearance over time. Because of
this characteristic, no finish warranty is offered on
unlacquered brass products.

Unlacquered Brass
(US3NL)

Tumbled White
Bronze (TWB)

FINISH OPTIONS

Polished Brass Lifetime (US3)

GENERAL INFORMATION

ORDERING AND RETURNS

SHIPPING AND FREIGHT

Placing Orders
You have several options to place an order:
• Email: orders@emtek.com
• Fax: 800-577-5771
• Phone: 800-356-2741
• Mail:Emtek Products, Inc.
15250 E. Stafford Street
City of Industry, CA 91744

Shipping Costs
For shipments to customers located in the U.S. or Canada, Emtek ships
freight prepaid via 3 day service. For shipments to customers located in
Mexico, Emtek ships freight prepaid via UPS ground. For shipments to
customers located outside of North America, freight will be prepaid by
Emtek to the U.S. location of the customer’s freight forwarder, via 3 day
service. Large orders may ship LTL or ground service at our discretion.

Hours of Operation
Monday – Friday: 5:00 AM - 5:00 PM Pacific Time.
Minimum Order Requirements
There are no minimum order quantity requirements.
Payment Terms
Net 30 Days on established credit.
Payment Options
We accept check, Visa, MasterCard, Discover and ACH.
Sales Tax
Sales tax will be charged unless a resale certificate has been provided.
Prices
All prices listed are in US funds. Our prices are subject to change
without prior notice.
Returns
• For your convenience, returns do not require authorization. Returns
can be processed directly from the Emtek website, www.emtek.com.
• Click on the “Dealer Site” icon on the right side of the bottom half of
the www.emtek.com home page, and then select “Product Returns”.
Fill out the RGA form, and follow the link to generate a UPS call tag
(terms and conditions apply – see the web site for details).
• A completed RGA form must accompany all packages for returned
goods.
• Returns are accepted from the Emtek dealer who originally
purchased the product that is being returned. Any refund or credit
would only be made to the original dealer.
• All returned goods are subject to a minimum 25% restocking fee.
• Returns for reasons other than an Emtek factory or processing error
will be subject to our customary restocking fee with a return freight
charge of $15.00 in the United States or $30.00 in Canada or Mexico.
This charge will be deducted from the credit issued for each call tag.
• No freight will be charged if the return is sent prepaid.

Shipping Options
Shipments can be upgraded to 2nd Day Service or Next Day Service for
a fee. Orders not shipping to the customer’s place of business must ship
via 2nd Day or Next Day Service, and additional charges will apply for
shipments to a residential address. Unfortunately, a customer’s freight
account cannot be used to pay for shipping charges.
Order Lead time
Emtek assembles all products to order in City of Industry, California.
Orders typically ship within two to three business days once an order is
released to the factory.
DEALER INFORMATION PORTAL
Online Account Access
We are pleased to announce that you can now access your Emtek
account information through the ASSA ABLOY customer information
portal, crcDash. Through crcDash you can access information about your
account at any time. You can:
• Check on the status of orders
• View both order and sales history
• View and print order acknowledgements, invoices, statements
and credits
• Track shipments
To register for crcDash or to make changes to access rights, we require
the approval from your company’s owner, CEO, President, or other
corporate officer. To get started, Click on the “Dealer Site” icon on the
bottom half of the www.emtek.com home page, and then select
“Forms & Instructions”. Please complete the “crcDash Access Rights
Form” and email to: crcdash.emtek@assaabloy.com. Should you have
any questions, please contact Customer Service.

Sample Program
Samples are gladly provided at no charge to authorized dealers, under the
following conditions:
•
•
•
•

½ Door Lock Dummy (max 2)
½ Pair of Hinges (max 2)
Cabinet Knob or Pull (max 3)
Door Accessory (max 1)

A shipping and handling fee of $2.50 per sample will be applied to your order
($2.50 for one sample, $5.00 for two samples, $7.50 for three samples, etc.)
Sample Order Exceptions
• Samples must be different product codes.
• Samples do not include active door hardware sets, 8” or larger cabinet pulls,
door pulls, appliance pulls, electronic locks, entry sets, bath hardware or
door accessories over $75 list.
Placing a Sample Order
• Send orders to samples@emtek.com or place by fax, phone, or mail.
• Write “NO CHARGE SAMPLE” on the order.
• Standard shipment upgrade charges will apply for expedited freight
requests.
• Orders for sample products must be placed separately and not combined
with other products.
• Emtek does not require samples to be returned.

Minimum Advertised Price Policy
Effective February 6, 2017
Emtek has determined that in order to better compete against
existing competitors it must exercise a greater degree of control
over the distribution of its products. Therefore, all sales of Emtek
products will be subject to this Policy. This Policy has been
unilaterally adopted and will be enforced strictly and uniformly.
Although resellers remain free to establish their own resale
prices, to the extent that any customer elects to advertise
products of Emtek in any manner, that is in print, in electronic
media, on its website, etc., and provides price information for
such products, that price information must be no less than List
Price less 20%, this is the Minimum Advertised Price (MAP).
Advertisements and offers to sell that do not include a particular
price, but require further action that implies a price that is lower
than the Minimum Advertised Price violate the MAP Policy.
Examples of such unauthorized advertisements include “drop in
cart” pricing, “add to cart” pricing, “click to see” pricing, and
discount coupon pricing. Also prohibited are advertisements that
indicate that discounts may be available when a customer takes
specific action that goes beyond buying the product, such as
“special price option” or “name your price.”

GENERAL INFORMATION

NO CHARGE SAMPLE PROGRAM

To assure fair business practices, we will strictly enforce this
policy. Violations of this MAP Policy will include termination of
our business relationship with a customer. On the first offense
there will be a written notice counseling any customer that
disregards this policy. Any customer who violates the policy a
second time, within one year of receiving a written notice of a
first violation, will be terminated.

No Restocking Fee Charged for Sample Orders with Exceptions
• Send orders to samples@emtek.com or place by fax, phone, or mail.
• Write “DEALER SAMPLE” on the order.
• Keep the samples you want and return the samples you don’t.
• Contact Customer Service for Return Authorization in advance to ensure a
restock fee is not applied to the return.
• Product must be returned in its original condition.
Emtek will not discuss any conditions of acceptance related to
• Return freight charge of $15USD in the United States or $30USD in Canada
or Mexico. This charge will be deducted from the credit issued for each call tag. this Policy, as it is non-negotiable and will not be altered for any
dealer. In addition, Emtek neither solicits, nor will it accept, any
• No freight will be charged if the return is sent prepaid.
assurance of compliance with this Policy. Nothing in this Policy
NO CHARGE DISPLAY PROGRAM
shall constitute an agreement between Emtek and any reseller
that the reseller will comply with this Policy.
Display Program
Emtek offers a variety of quality, well-crafted displays. We take great pride in the
quality of our displays, which are hand-built in our Southern California facility by
our talented craftsmen.
• Click on the “Dealer Site” icon on the right side of the bottom half of the
www.emtek.com home page, and then select “Displays”.
• Browse our online catalog using the navigation system on the left column to
view by function, style, or material.
Placing a Display Order
Please contact your local sales representative for ordering information.
Product for use on Displays in your Showroom
Thank you for considering Emtek products for use on door displays and kitchen/
bath vignettes installed in your showroom. Please contact your local sales
representative for ordering information.
7

DOOR CONFIGURATION

#1
American Cylinder Hub Below Handle
35⁄8” Center to Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen®
Marvin Integrity®, Paddock Lockmaster™, Superior®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

2” x 10” Keyed
Cortina Levers

11⁄2” x 11” Non-Keyed
Rustic Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1171

See Page 4 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1172
1173
1174
1175

List Price

$194.00

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1181
1182
1183
1184
1185

Handing Required
• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker.
• Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
8

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.
Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

DOOR CONFIGURATION #1

Brass Modern

11⁄2” x 11” Non-Keyed
Luzern Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

11A1

See Page 4 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Triton Levers

11A2
11A3
11A4
11A5

List Price

$194.00

11B1
11B2
11B3
11B4
11B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

11⁄2” x 11” Non-Keyed
Athena Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

11A1

2” x 10” Keyed
Dresden Levers

Lever Style (LH/RH)

Finish

See Page 4 for
Stainless Steel
Lever Options.

Stainless Steel (SS)

List Price

$194.00

11A2
11A3
11A4
11A5

11B1
11B2
11B3
11B4
11B5

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
9

DOOR CONFIGURATION

Sandcast
Arched

11⁄2” x 11” Non-Keyed
Cimarron Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1111

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Durango Levers

List Price

$216.00

1112
1113
1114
1115

1121
1122
1123
1124
1125

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
To order: (W) Product Code + Lever Style + Handing + Finish Code

ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

DOOR CONFIGURATION #1

Sandcast
Rectangular

11⁄2” x 11” Non-Keyed
Cody Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1151

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Montrose Levers

List Price

$216.00

1152
1153
1154
1155

1161
1162
1163
1164
1165

Bronze Tuscany

11⁄2” x 11” Non-Keyed
Octagon Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

1131

2” x 10” Keyed
Medici Levers

Lever Style (LH/RH)

Finish

See Page 4 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$216.00

1132
1133
1134
1135

1141
1142
1143
1144
1145

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
11

DOOR CONFIGURATION #1

Specification Sheet for Components and Door Thickness

Door Configuration # 1 American Cylinder Below Handle 3 5/8" Center to Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

CONSTRUCTION KEYING
• Lost ball system.
• Last four pin locations drilled for lost ball application.
• Master key pins used for code variability.
• Construction keys and owner keys sent separately.
• Order by indicating “Construction Keyed, House #_” next to applicable locks.

- Construction devices used on one or
more of last four positions.

- Dimples drilled in plug in this position.

Charge for Construction Keying - $3.00 (NET)
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder
• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code
• Order by indicating “Key Code XXXXX “ next to applicable locks.

Keying Alike
• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.
• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
12

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #1

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
1 1/2” x 11” Plates, Product Codes 1111, 1131, 1151, 1171, 11A1

2” x 10” Plates, Product Codes 1121, 1141, 1161, 1181, 11B1

Non-Keyed, Passage (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1112, 1132, 1152, 1172, 11A2

2” x 10” Plates, Product Codes 1122, 1142, 1162, 1182, 11B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
1 1/2” x 11” Plates, Product Codes 1113, 1133, 1153, 1173, 11A3

2” x 10” Plates, Product Codes 1123, 1143, 1163, 1183, 11B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1114, 1134, 1154, 1174, 11A4

Fixed

2” x 10” Plates, Product Codes 1124, 1144, 1164, 1184, 11B4

Fixed

Dummy Pair (for Non-Active Door)
1 1/2” x 11” Plates, Product Codes 1115, 1135, 1155, 1175, 11A5

Fixed

emtek.com 800.356.2741

Fixed

2” x 10” Plates, Product Codes 1125, 1145, 1165, 1185, 11B5

Fixed

DOOR CONFIGURATION

#2
American Cylinder Hub Above Handle
35⁄8” Center to Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

11⁄2” x 11” Non-Keyed
Turino Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1271

See Page 4 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

2” x 10” Non-Keyed
Santa Fe Levers

1272
1273
1274
1275

List Price

$194.00

1281
1282
1283
1284
1285

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

DOOR CONFIGURATION #2

Brass Modern

11⁄2” x 11” Non-Keyed
Helios Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

12A1

See Page 4 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

2” x 10” Non-Keyed
Hercules Levers

12A2
12A3
12A4
12A5

List Price

$194.00

12B1
12B2
12B3
12B4
12B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

11⁄2” x 11” Keyed
Poseidon Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

12A1

2” x 10” Non-Keyed
Hermes Levers

Lever Style (LH/RH)

Finish

See Page 4 for
Stainless Steel
Lever Options.

Stainless Steel (SS)

List Price

$194.00

12A2
12A3
12A4
12A5

12B1
12B2
12B3
12B4
12B5

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
15

DOOR CONFIGURATION

#2
American Cylinder Hub Above Handle
35⁄8” Center to Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Arched

11/2” x 11” Keyed
Durango Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1211

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Teton Levers

List Price

$216.00

1212
1213
1214
1215

1221
1222
1223
1224
1225

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

DOOR CONFIGURATION #2

Sandcast Rectangular

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1251

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Montrose Levers

List Price

$216.00

1252
1253
1254
1255

1261
1262
1263
1264
1265

Bronze Tuscany

11⁄2” x 11” Non-Keyed
Napoli Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

1231

2” x 10” Non-Keyed
Padua Levers

Lever Style (LH/RH)

Finish

See Page 4 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$216.00

1232
1233
1234
1235

1241
1242
1243
1244
1245

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
17

DOOR CONFIGURATION #2

Specification Sheet for Components and Door Thickness

Door Configuration #2 American Cylinder Above Handle 3 5/8" Center to Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

- Construction devices used on one or
more of last four positions.

- Dimples drilled in plug in this
position.

Charge for Construction Keying - $3.00 (NET)
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder
• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code
• Order by indicating “Key Code XXXXX “ next to applicable locks.

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #2

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
1 1/2” x 11” Plates, Product Codes 1211, 1231, 1251, 1271, 12A1

2” x 10” Plates, Product Codes 1221, 1241, 1261, 1281, 12B1

Non-Keyed, Passage (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1212, 1232, 1252, 1272, 12A2

2” x 10” Plates, Product Codes 1222, 1242, 1262, 1282, 12B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
1 1/2” x 11” Plates, Product Codes 1213, 1233, 1253, 1273, 12A3

2” x 10” Plates, Product Codes 1223, 1243, 1263, 1283, 12B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1214, 1234, 1254, 1274, 12A4

Fixed

2” x 10” Plates, Product Codes 1224, 1244, 1264, 1284, 12B4

Fixed

Dummy Pair (for Non-Active Door)
1 1/2” x 11” Plates, Product Codes 1215, 1235, 1255, 1275, 12A5

Fixed

emtek.com 800.356.2741

Fixed

2” x 10” Plates, Product Codes 1225, 1245, 1265, 1285, 12B5

Fixed

DOOR CONFIGURATION

#3
American Cylinder Hub Above Handle
41⁄8” Center to Center
ref. Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

11⁄2” x 11” Keyed
Wembley Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1371

See Page 4 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

Sets with 11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Non-Keyed
Rope Levers

1372
1373
1374
1375

List Price

$194.00

Sets with 2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1381
1382
1383
1384
1385

ref. Andersen®

DOOR CONFIGURATION #3

Brass Modern

11⁄2” x 11” Keyed
Aireon Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

13A1

See Page 4 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed American Style Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Helios Levers

13A2
13A3
13A4
13A5

List Price

$194.00

13B1
13B2
13B3
13B4
13B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

11⁄2” x 11” Keyed
Athena Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

13A1

2” x 10” Non-Keyed
Dresden Levers

Lever Style (LH/RH)

Finish

See Page 4 for
Stainless Steel
Lever Options.

Stainless Steel (SS)

List Price

$194.00

13A2
13A3
13A4
13A5

13B1
13B2
13B3
13B4
13B5

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
21

DOOR CONFIGURATION

#3
American Cylinder Hub Above Handle
41⁄8” Center to Center
ref. Andersen®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Arched

11⁄2” x 11” Keyed
Durango Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1311

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Non-Keyed
Cody Levers

List Price

$216.00

1312
1313
1314
1315

1321
1322
1323
1324
1325

ref. Andersen®

DOOR CONFIGURATION #3

Sandcast Rectangular

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1351

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Montrose Levers

List Price

$216.00

1352
1353
1354
1355

1361
1362
1363
1364
1365

Bronze Tuscany

11⁄2” x 11” Keyed
Medici Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

1331

2” x 10” Non-Keyed
Padua Levers

Lever Style (LH/RH)

Finish

See Page 4 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$216.00

1332
1333
1334
1335

1341
1342
1343
1344
1345

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
23

DOOR CONFIGURATION #3

Specification Sheet for Components and Door Thickness

Door Configuration #3 American Cylinder Above Handle 4 1/8" Center to Center
Cylinder Tailpiece
Includes Configuration #3
Special Mounting Hardware

Steel
Spindle

Rosette Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Configuration #3 Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Configuration #3 Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

- Construction devices used on one or
more of last four positions.

- Dimples drilled in
plug in this position.

Charge for Construction Keying - $3.00 (NET)
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder
• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code
• Order by indicating “Key Code XXXXX “ next to applicable locks.

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #3

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Andersen®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
1 1/2” x 11” Plates, Product Codes 1311, 1331, 1351, 1371, 13A1

2” x 10” Plates, Product Codes 1321, 1341, 1361, 1381, 13B1

Non-Keyed, Passage (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1312, 1332, 1352, 1372, 13A2

2” x 10” Plates, Product Codes 1322, 1342, 1362, 1382, 13B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
1 1/2” x 11” Plates, Product Codes 1313, 1333, 1353, 1373, 13A3

2” x 10” Plates, Product Codes 1323, 1343, 1363, 1383, 13B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1314, 1334, 1354, 1374, 13A4

2” x 10” Plates, Product Codes 1324, 1344, 1364, 1384, 13B4

Fixed

Dummy Pair (for Non-Active Door)
1 1/2” x 11” Plates, Product Codes 1315, 1335, 1355, 1375, 13A5

Fixed

emtek.com 800.356.2741

Fixed

2” x 10” Plates, Product Codes 1325, 1345, 1365, 1385, 13B5

Fixed

DOOR CONFIGURATION

#4
American Cylinder Hub Above Handle
35⁄8” Center to Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN®
Jeldwen® Custom Collection (formerly Pozzi®)
Marvin®, PGT®, Premium Collection (formerly Norco®)
Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.
See Configuration #1 for Marvin Integrity® Doors

Brass Concord

11⁄2” x 11” Keyed
Coventry Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1471

See Page 4 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

2” x 10” Non-Keyed
Santa Fe Levers

1472
1473
1474
1475

List Price

$194.00

1481
1482
1483
1484
1485

ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield®

DOOR CONFIGURATION #4

Brass Modern

11⁄2” x 11” Keyed
Aireon Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

14A1

See Page 4 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

2” x 10” Non-Keyed
Hercules Levers

14A2
14A3
14A4
14A5

List Price

$194.00

14B1
14B2
14B3
14B4
14B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

11⁄2” x 11” Keyed
Stuttgart Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

14A1

2” x 10” Non-Keyed
Hermes Levers

Lever Style (LH/RH)

Finish

See Page 4 for
Stainless Steel
Lever Options.

Stainless Steel (SS)

List Price

$194.00

14A2
14A3
14A4
14A5

14B1
14B2
14B3
14B4
14B5

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
27

DOOR CONFIGURATION

Sandcast Arched

11⁄2” x 11” Keyed
Montrose Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1411

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Non-Keyed
Cody Levers

List Price

$216.00

1412
1413
1414
1415

1421
1422
1423
1424
1425

ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield®

DOOR CONFIGURATION #4

Sandcast Rectangular

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1451

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Teton Levers

List Price

$216.00

1452
1453
1454
1455

1461
1462
1463
1464
1465

Bronze Tuscany

11⁄2” x 11” Non-Keyed
Napoli Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

1431

2” x 10” Keyed
Napoli Levers

Lever Style (LH/RH)

Finish

See Page 4 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$216.00

1432
1433
1434
1435

1441
1442
1443
1444
1445

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
29

DOOR CONFIGURATION #4

Specification Sheet for Components and Door Thickness

Door Configuration #4 American Cylinder Above Handle 3 5/8" Center to Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

- Construction devices used on
one or more of last four positions.

- Dimples drilled in
plug in this position.

Charge for Construction Keying - $3.00 (NET)
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder
• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code
• Order by indicating “Key Code XXXXX “ next to applicable locks.

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #4

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
1 1/2” x 11” Plates, Product Codes 1411, 1431, 1451, 1471, 14A1

2” x 10” Plates, Product Codes 1421, 1441, 1461, 1481, 14B1

Non-Keyed, Passage (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1412, 1432, 1452, 1472, 14A2

2” x 10” Plates, Product Codes 1422, 1442, 1462, 1482, 14B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
1 1/2” x 11” Plates, Product Codes 1413, 1433, 1453, 1473, 14A3

2” x 10” Plates, Product Codes 1423, 1443, 1463, 1483, 14B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1414, 1434, 1454, 1474, 14A4

2” x 10” Plates, Product Codes 1424, 1444, 1464, 1484, 14B4

Fixed

Dummy Pair (for Non-Active Door)
1 1/2” x 11” Plates, Product Codes 1415, 1435, 1455, 1475, 14A5

Fixed

emtek.com 800.356.2741

Fixed

2” x 10” Plates, Product Codes 1425, 1445, 1465, 1485, 14B5

Fixed

DOOR CONFIGURATION

#5
Euro Profile Cylinder Below Handle
35⁄8” Center to Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®
Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®
Semco®, Sierra Pacific®, Signature®, Simpson®
Therma-Tru®, Vetter®, Willmar®, Windsor®
Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

11⁄2” x 11” Keyed
Turino Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1571

See Page 4 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

Sets with 11⁄2” x 11” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Rustic Levers

1572
1573
1574
1575

List Price

$194.00

Sets with 2” x 10” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

1581
1582
1583
1584
1585

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Weiser® keyway not available for Configuration 5, Euro cylinder.
To order: Product Code + Lever Style + Handing + Finish Code

ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®
Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

DOOR CONFIGURATION #5

Brass Modern

11⁄2” x 11” Keyed
Hermes Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

15A1

See Page 4 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
11⁄2” x 11” Plates
Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
TRAIL KNOB
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

2” x 10” Keyed
Triton Levers

15A2
15A3
15A4
15A5

List Price

$194.00

Sets with 2” x 10” Plates
15B1

Keyed with Euro Profile Cylinder
(Schlage® Keyway standard, Rekeyable)
Non-Keyed Passage
Non-Keyed Euro Profile Thumbturn Inside
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Dummy Pair

15B2
15B3
15B4
15B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

11⁄2” x 11” Keyed
Stuttgart Levers

STAINLESS STEEL PLATES, MODERN STYLE

2” x 10” Non-Keyed
Hercules Levers

Product Code

15A1

Lever Style (LH/RH)

Finish

See Page 4 for
Stainless Steel
Lever Options.

Stainless Steel (SS)

List Price

$194.00

15A2
15A3
15A4
15A5

15B1
15B2
15B3
15B4
15B5

Weiser® keyway not available for Configuration 5, Euro cylinder.
33

DOOR CONFIGURATION

Sandcast Arched

11⁄2” x 11” Keyed
Lariat Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1511

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Durango Levers

List Price

$216.00

1512
1513
1514
1515

1521
1522
1523
1524
1525

Weiser® keyway not available for Configuration 5, Euro cylinder.
To order: Product Code + Lever Style + Handing + Finish Code

DOOR CONFIGURATION #5

Sandcast Rectangular

11⁄2” x 11” Keyed
Teton Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1551

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Non-Keyed
Montrose Levers

List Price

$216.00

1552
1553
1554
1555

1561
1562
1563
1564
1565

Bronze Tuscany

11⁄2” x 11” Keyed
Octagon Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

1531

2” x 10” Keyed
Padua Levers

Lever Style (LH/RH)

Finish

See Page 4 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$216.00

1532
1533
1534
1535

1541
1542
1543
1544
1545

Weiser® keyway not available for Configuration 5, Euro cylinder.
35

DOOR CONFIGURATION #5

Specification Sheet for Components and Door Thickness

Door Configuration #5
Euro Profile Cylinder Below Handle
3 5/8" Center to Center

Full Euro Profile Cylinder

Half Euro Profile Cylinder

CY4-ERSGL25

CY4-ERHLF16TT

CY4-ERSGL32

CY4-ERHLF19TT

CY4-ERSGL35

CY4-ERHLF21TT

Full Euro Profile Cylinder

Steel
Spindle

Cylinder
Screw
Rosette
Screws

Keyed Plates with Euro Profile Cylinder
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 21/2”

Extended Door Thickness: Over 21/2”to 23/4”

Standard Components:
• 2 9/16” Euro Profile Cylinder
• 3 3/4” Steel Spindle
• 1 1/2” Rosette Screws

Extended Components:
• 3 5/32” Euro Profile Cylinder
• 4 1/2” Steel Spindle
• 2” Rosette Screws

Extended Components:
• 3 17/32” Euro Profile Cylinder
• 5” Steel Spindle
• 3” Rosette Screws

Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 21/2”

Extended Door Thickness: Over 21/2”to 23/4”

Standard Components:
• 1 21/32” Euro Profile Half-Cylinder
• 3 3/4” Steel Spindle
• 1 1/2” Rosette Screws

Extended Components:
• 1 31/32” Euro Profile Half-Cylinder
• 4 1/2” Steel Spindle
• 2” Rosette Screws

Extended Components:
• 2 5/32” Euro Profile Half-Cylinder
• 5” Steel Spindle
• 3” Rosette Screws

Non-Keyed Plates with Euro Profile Half Cylinder

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

CUSTOM KEYING
Charge for Re-Keying - $2.00 (NET) per Cylinder
• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code
• Order by indicating “Key Code XXXXX “ next to applicable locks.

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #5

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®,
Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)
1 1/2” x 11” Plates, Product Codes 1511, 1531, 1551, 1571, 15A1

2” x 10” Plates, Product Codes 1521, 1541, 1561, 1581, 15B1

Non-Keyed, Passage (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1512, 1532, 1552, 1572, 15A2

2” x 10” Plates, Product Codes 1522, 1542, 1562, 1582, 15B2

Non-Keyed, Euro Profile Style Thumbturn Inside (for Active Door)
1 1/2” x 11” Plates, Product Codes 1513, 1533, 1553, 1573, 15A3

2” x 10” Plates, Product Codes 1523, 1543, 1563, 1583, 15B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1514, 1534, 1554, 1574, 15A4

2” x 10” Plates, Product Codes 1524, 1544, 1564, 1584, 15B4

Fixed

Dummy Pair (for Non-Active Door)
1 1/2” x 11” Plates, Product Codes 1515, 1535, 1555, 1575, 15A5

Fixed

emtek.com 800.356.2741

Fixed

2” x 10” Plates, Product Codes 1525, 1545, 1565, 1585, 15B5

Fixed

DOOR CONFIGURATION

#6
American Cylinder Hub Below Handle
35⁄8” Center to Center
ref. Milgard®, Pella®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Concord

11⁄2” x 11” Keyed
Cortina Levers

BRASS PLATES, CONCORD STYLE

Product Code

Lever Style (LH/RH)

Finish

1671

See Page 4 for
Brass & Modern
Brass Lever
Options.

Polished Brass - Lifetime (US3)
French Antique (US7)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

2” x 10” Non-Keyed
Santa Fe Levers

1672
1673
1674
1675

List Price

$194.00

1681
1682
1683
1684
1685

ref. Milgard®, Pella®

DOOR CONFIGURATION #6

Brass Modern

11⁄2” x 11” Non-Keyed
Hercules Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

16A1

See Page 4 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

2” x 10” Non-Keyed
Luzern Levers

16A2
16A3
16A4
16A5

List Price

$194.00

16B1
16B2
16B3
16B4
16B5

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

Stainless Steel

11⁄2” x 11” Non-Keyed
Athena Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

16A1

2” x 10” Non-Keyed
Hercules Levers

Lever Style (LH/RH)

Finish

See Page 4 for
Stainless Steel
Lever Options.

Stainless Steel (SS)

List Price

$194.00

16A2
16A3
16A4
16A5

16B1
16B2
16B3
16B4
16B5

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
39

DOOR CONFIGURATION

#6
American Cylinder Hub Below Handle
35⁄8” Center to Center
ref. Milgard®, Pella®

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Sandcast Arched

11⁄2” x 11” Non-Keyed
Teton Levers

SANDCAST BRONZE PLATES, ARCHED STYLE

Product Code

Lever Style (LH/RH)

Finish

1611

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Durango Levers

List Price

$216.00

1612
1613
1614
1615

1621
1622
1623
1624
1625

ref. Milgard®, Pella®

DOOR CONFIGURATION #6

Sandcast Rectangular

11⁄2” x 11” Non-Keyed
Lariat Levers

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

Product Code

Lever Style (LH/RH)

Finish

1651

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

2” x 10” Keyed
Montrose Levers

List Price

$216.00

1652
1653
1654
1655

1661
1662
1663
1664
1665
Bronze Tuscany

Bronze Tuscany

11⁄2” x 11” Keyed
Octagon Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

1631

2” x 10” Non-Keyed
Napoli Levers

Lever Style (LH/RH)

Finish

See Page 4 for Lost
Wax Cast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

List Price

$216.00

1632
1633
1634
1635

1641
1642
1643
1644
1645

Weiser®(WR5) Keyway
• Specify by adding "W" to the beginning of Product Code.
• No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
41

DOOR CONFIGURATION #6

Specification Sheet for Components and Door Thickness

Door Configuration #6 American Cylinder Below Handle 3 5/8" Center to Center
Cylinder Tailpiece

Steel
Spindle
Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 3 3/4” Steel Spindle
• 2” Rosette Screws
• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 4 1/2” Steel Spindle
• 2 1/2” Rosette Screws
• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

- Construction devices used on one or
more of last four positions.

- Dimples drilled in
plug in this position.

Charge for Construction Keying - $3.00 (NET)
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder
• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code
• Order by indicating “Key Code XXXXX “ next to applicable locks.

Decorative Multi Point Lock Trim for Swinging Patio Doors

Specification Sheet for Trim and Cylinder Styles

DOOR CONFIGURATION #6

Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Milgard®, Pella®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
1 1/2” x 11” Plates, Product Codes 1611, 1631, 1651, 1671, 16A1

2” x 10” Plates, Product Codes 1621, 1641, 1661, 1681, 16B1

Non-Keyed, Passage (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1612, 1632, 1652, 1672, 16A2

2” x 10” Plates, Product Codes 1622, 1642, 1662, 1682, 16B2

Non-Keyed, American Style Thumbturn Inside (for Active Door)
1 1/2” x 11” Plates, Product Codes 1613, 1633, 1653, 1673, 16A3

2” x 10” Plates, Product Codes 1623, 1643, 1663, 1683, 16B3

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
1 1/2” x 11” Plates, Product Codes 1614, 1634, 1654, 1674, 16A4

2” x 10” Plates, Product Codes 1624, 1644, 1664, 1684, 16B4

Fixed

Dummy Pair (for Non-Active Door)
1 1/2” x 11” Plates, Product Codes 1615, 1635, 1655, 1675, 16A5

Fixed

emtek.com 800.356.2741

Fixed

2” x 10” Plates, Product Codes 1625, 1645, 1665, 1685, 16B5

Fixed

DOOR CONFIGURATION

#7
American Cylinder Hub Above Handle
6” Center to Center
ref. Trillenium® (formerly W&F Manufacturing)

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Brass Modern

2” x 10” Keyed
Poseidon Levers

BRASS PLATES, MODERN STYLE

Product Code

Lever Style (LH/RH)

Finish

17B1

See Page 4 for
Brass & Modern
Brass Lever
Options.

Satin Brass (US4)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Flat Black (US19)
Polished Chrome (US26)
Unlacquered Brass (US3NL)*

METRIC
KNOB
Sets
with
2” x 10” Plates
Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed American Style T-Turn Inside (Patio Function)

2” x 10” Non-Keyed
Hercules Levers

17B3

Dummy Pair

17B5

Non-Keyed American Style T-Turn Inside, Fixed Handles

17B6

List Price

$194.00

*Unlacquered Brass (US3NL)
finish available for a $40 List Price
upcharge per item.

ref. Trillenium® (formerly W&F Manufacturing)

DOOR CONFIGURATION #7

Stainless Steel

2” x 10” Keyed
Stuttgart Levers

STAINLESS STEEL PLATES, MODERN STYLE

Product Code

17B1

2” x 10” Non-Keyed
Hercules Levers

Lever Style (LH/RH)

Finish

See Page 4 for
Stainless Steel
Lever Options.

Stainless Steel (SS)

17B5

Non-Keyed American Style T-Turn Inside, Fixed Handles

17B6

Sandcast Arched

2” x 10” Keyed
Montrose Levers

Product Code

1721

2” x 10” Non-Keyed
Cody Levers

Lever Style (LH/RH)

Finish

1725

Non-Keyed American Style T-Turn Inside, Fixed Handles

1726

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

Sandcast Rectangular

Product Code

METRIC
KNOB
Sets
with
2” x 10” Plates
1761

2” x 10” Non-Keyed
Lariat Levers

Lever Style (LH/RH)

Finish

See Page 4 for
Sandcast Bronze
Lever Options.

Flat Black Bronze (FB)
Medium Bronze (MB)
Tumbled White Bronze (TWB)

List Price

$216.00

1763

Dummy Pair

1765

Non-Keyed American Style T-Turn Inside, Fixed Handles

1766

emtek.com 800.356.2741

$216.00

Sandcast Rectangular

2” x 10” Keyed
Lariat Levers

Keyed with American Cylinder
(Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
TRAIL KNOB
Non-Keyed American Style T-Turn Inside (Patio Function)

List Price

1723

Dummy Pair

SANDCAST BRONZE PLATES, RECTANGULAR STYLE

$194.00

17B3

Dummy Pair

SANDCAST BRONZE PLATES, ARCHED STYLE

List Price

DOOR CONFIGURATION

#7
American Cylinder Hub Above Handle
6” Center to Center
ref. Trillenium® (formerly W&F Manufacturing)

Each Multi Point Lock Trim now includes the Spring Assist function
which returns the lever to the neutral position and eliminates
sagging handles.

Bronze Tuscany

2” x 10” Keyed
Padua Levers

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

Product Code

Lever Style (LH/RH)

Finish

1741

See Page 4 for
Lost Wax Cast
Bronze Lever
Options.

Flat Black Bronze (FB)
Medium Bronze (MB)

2” x 10” Non-Keyed
Napoli Levers

$216.00

1743

Dummy Pair

1745

Non-Keyed American Style T-Turn Inside, Fixed Handles

1746

List Price

Specification Sheet for Components and Door Thickness

DOOR CONFIGURATION #7

Door Configuration #7 American Cylinder Above Handle 6" Center to Center
Cylinder Tailpiece

Steel Spindles
(Half-Spindle)

Rosette
Screws

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Single Cylinder Tailpiece
• 2” Steel Spindles (Half-spindle)
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Single Cylinder Tailpiece
• 2” Steel Spindles (Half-spindle)
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/4”

Standard Components:
• Thumbturn Tailpiece
• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)
• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door
• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:
• Long Thumbturn Tailpiece
• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)
• 2 1/2” Rosette Screws 2” - 2 1/4” think door
• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

- Construction devices used on one or
more of last four positions.

- Dimples drilled in plug
in this position.

Charge for Construction Keying - $3.00 (NET)
• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder
• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code
• Order by indicating “Key Code XXXXX “ next to applicable locks.

DOOR CONFIGURATION #7

Specification Sheet for Trim and Cylinder Styles
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Trillenium® (formerly W&F Manufacturing)

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
2” x 10” Plates, Product Codes 1721, 1741,1761, 17B1

Non-Keyed, American Style T-Turn Inside (Active Door)
2” x 10” Plates, Product Codes 1723, 1743, 1763, 17B3

Dummy Pair (for Non-Active Door)
2” x 10” Plates, Product Codes 1725, 1745, 1765, 17B5

Non-Keyed, Fixed Handles, American Style T-Turn Inside (for Semi-Active Door)
2” x 10” Plates, Product Codes 1726, 1746, 1766, 17B6

Decorative Multi Point Lock Trim for Swinging Patio Doors

PRODUCT INDEX
PRODUCT
CODE

PAGE

1111
1112
1113
1114
1115
1121
1122
1123
1124
1125
1131
1132
1133
1134
1135
1141
1142
1143
1144
1145
1151
1152
1153
1154
1155
1161
1162
1163
1164
1165
1171
1172
1173
1174
1175
1181
1182
1183

10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
8
8
8
8
8
8
8
8

1184
1185
1211
1212
1213
1214
1215
1221
1222
1223
1224
1225
1231
1232
1233
1234
1235
1241
1242
1243
1244
1245
1251
1252
1253
1254
1255
1261
1262
1263
1264
1265
1271
1272
1273
1274
1275
1281
1282
1283

8
8
16
16
16
16
16
16
16
16
16
16
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
14
14
14
14
14
14
14
14

1284
1285
1311
1312
1313
1314
1315
1321
1322
1323
1324
1325
1331
1332
1333
1334
1335
1341
1342
1343
1344
1345
1351
1352
1353
1354
1355
1361
1362
1363
1364
1365
1371
1372
1373
1374
1375
1381
1382
1383

14
14
22
22
22
22
22
22
22
22
22
22
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
20
20
20
20
20
20
20
20

1384
1385
1411
1412
1413
1414
1415
1421
1422
1423
1424
1425
1431
1432
1433
1434
1435
1441
1442
1443
1444
1445
1451
1452
1453
1454
1455
1461
1462
1463
1464
1465
1471
1472
1473
1474
1475
1481
1482
1483

20
20
28
28
28
28
28
28
28
28
28
28
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
26
26
26
26
26
26
26
26

1484
1485
1511
1512
1513
1514
1515
1521
1522
1523
1524
1525
1531
1532
1533
1534
1535
1541
1542
1543
1544
1545
1551
1552
1553
1554
1555
1561
1562
1563
1564
1565
1571
1572
1573
1574
1575
1581
1582
1583

26
26
34
34
34
34
34
34
34
34
34
34
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
32
32
32
32
32
32
32
32

1584
1585
1611
1612
1613
1614
1615
1621
1622
1623
1624
1625
1631
1632
1633
1634
1635
1641
1642
1643
1644
1645
1651
1652
1653
1654
1655
1661
1662
1663
1664
1665
1671
1672
1673
1674
1675
1681
1682
1683

32
32
40
40
40
40
40
40
40
40
40
40
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
38
38
38
38
38
38
38
38

1684
1685
1721
1723
1725
1726
1741
1743
1745
1746
1761
1763
1765
1766
11A1
11A2
11A3
11A4
11A5
11B1
11B2
11B3
11B4
11B5
12A1
12A2
12A3
12A4
12A5
12B1
12B2
12B3
12B4
12B5
13A1
13A2
13A3
13A4
13A5
13B1

38
38
45
45
45
45
46
46
46
46
45
45
45
45
9
9
9
9
9
9
9
9
9
9
15
15
15
15
15
15
15
15
15
15
21
21
21
21
21
21

13B2
13B3
13B4
13B5
14A1
14A2
14A3
14A4
14A5
14B1
14B2
14B3
14B4
14B5
15A1
15A2
15A3
15A4
15A5
15B1
15B2
15B3
15B4
15B5
16A1
16A2
16A3
16A4
16A5
16B1
16B2
16B3
16B4
16B5
17B1
17B3
17B5
17B6

21
21
21
21
27
27
27
27
27
27
27
27
27
27
33
33
33
33
33
33
33
33
33
33
39
39
39
39
39
39
39
39
39
39
44,45
44,45
44,45
44,45

Door Manufacturers listed under each configuration are for reference only and are subject to change.
Some retrofitting may be necessary. Please carefully measure and identify your hardware using the
diagrams and steps listed on page 2 and 3.

G-U® is a registered trademark of G-U Hardware, Inc. Paddock™ is a registered trademark of Yale® UK. Pella® is a registered trademark of Pella
Corporation. Sierra Pacific Windows® is a registered trademark of Sierra Pacific Industries. Superior® is a registered trademark of Superior Engineered
Products Corporation. Willmar® is a registered trademark of JELD-WEN of Canada Ltd. Andersen® is a registered trademark of Andersen Corporation.
Trillenium® is a registered trademark of Endura Products, Inc. Eagle® is a registered trademark of Eagle Window and Door, Inc, BiltBest® is a registered
trademark of BiltBest Windows and Patio Doors. Ashland® is a registered trademark of Ashland Products, Inc. Caradco®, JELD-WEN, Norco® and Pozzi®
are registered trademarks of JELD-WEN Inc., Oregon, USA. Integrity® and Marvin® are registered trademarks of Marvin Windows and Doors. Milgard®
is a registered trademark of Milgard Windows, Inc. Therma-Tru® is a registered trademark of Therma-Tru Doors®. HOPPE® is a registered trademark
of HOPPE North America, Inc. Hurd® is a registered trademark of Hurd Millwork Company. Kolbe & Kolbe® is a registered trademark of Kolbe & Kolbe
Millwork Company, Inc. Lincoln® is a registered trademark of Lincoln Wood Products, Inc. Loewen® is a registered trademark of Loewen Windows.
PGT® is a registered trademark of PGT Industries. Peachtree® and Vetter® are registered trademark of The Peachtree Companies, Inc. Semco® is a
registered trademark of Semling-Menke Co. Inc. Weathershield® is a registered trademark of Weathershield Mfg. Inc. KML by Andersen® is a
registered trademark of KML by Andersen. Atrium® is a registered trademark of Atrium. KFV® is a registered trademark of KFV. Simpson® is a
registered trademark of Simpson. Signature® is a registered trademark of Signature. Crestline® is a registered trademark of Crestline. Windsor® is a
registered trademark of Windsor. With the exception of Paddock™, none of the aforementioned companies are affiliated with Emtek Products, Inc.

Multi Point Lock Trim Order Form

Acct#

Order Placed By

Date

Billing Information

Shipping Address

Company Name

Address

City

State, Zip

Telephone

State, Zip

Telephone

PO#

QTY

City

Note

Configuration

EMTEK Products, Inc.
15250 E Stafford Street
City of Industry, CA 91744
Tel: 800-356-2741 626-961-0413
Fax: 800-577-5771 626-336-2812
www.emtek.com

Product Code

Lever Style

Handing
(LH/RH)

Finish

Price

Please Fax Order Form to (800) 577-5771
or Email to orders@emtek.com

LIFETIME LIMITED WARRANTY

Subject to the terms and conditions of this warranty, Emtek Products, Inc. (“Company”) extends a lifetime limited warranty to the original
consumer user (“Original User”) of our product (“Product”) against defects in material and workmanship, as long as the Original User occupies
the residential premises upon which the Product was originally installed.
This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on
or after April 2, 2012.
Original User: The Original User will return the defective Product to the Company, free and clear of all liens and encumbrances, transportation
prepaid, accompanied by a statement of defects and proof of purchase.
What Emtek will do: Upon return of the defective Product to Emtek, Emtek’s sole obligation, at its option, is to either repair or replace the
Product, or refund the original purchase price in exchange for the Product.
THE COMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.
THE COMPANY’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE
ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, STRICT LIABILITY, PATENT
INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some local laws do not allow the exclusion
or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific
legal rights and a buyer may also have other rights which may vary from state to state.
WHAT IS NOT COVERED: THE FOLLOWING COSTS, EXPENSES AND DAMAGES ARE NOT COVERED BY THE PROVISIONS OF THIS LIMITED
WARRANTY: (I) LABOR COSTS INCLUDING, BUT NOT LIMITED TO, SUCH COSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUCT; AND (II)
SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUCT TO EMTEK.
THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (I) USED IN COMMERCIAL APPLICATIONS; (II) USED IN COMMON AREA
APPLICATIONS; (III) USED FOR PURPOSES FOR WHICH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHICH HAVE BEEN SUBJECTED TO
ALTERATION, ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT; (V) WHICH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED;
(VI) WHICH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUCTIONS PROVIDED BY EMTEK; (VII) WHICH HAVE BEEN SUBJECTED TO
IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL CONDITIONS; OR (VIII) WHICH, BASED ON EMTEK’S EXAMINATION, DO NOT
DISCLOSE TO EMTEK’S SATISFACTION NON-CONFORMANCE TO THE WARRANTY. Additionally, this warranty DOES NOT COVER scratches,
abrasions, or deterioration due to the use of paints, solvents or other chemicals.
Finish Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish
warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and
Unlacquered Brass finishes. All other finishes carry a five year finish warranty.
Warranty claims: For warranty service and shipping instructions contact customer service at:
EMTEK Products, Inc.
15250 E. Stafford Street
City of Industry, CA 91744
Tel: (626) 961-0413

ASSA ABLOY is the global
leader in door opening solutions,
dedicated to satisfying
end-user needs for security,
safety and convenience

EMTEK Products, Inc.
15250 E. Stafford Street
Cit y of Industr y • CA 91744
Tel: 800-356-2741 • 626-961-0413
Fax: 800-577-5771 • 626-336-2812
emtek.com

BX4-3PTPRICEBK2018
OCTOBER 2017

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:08:02 09:08:16-06:00
Creator                         : Adobe InDesign CC 2017 (Macintosh)
Modify Date                     : 2017:08:09 22:43:30+08:00
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:08:09 22:43:30+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:e4b6511a-6145-9d43-8d74-e09c4d5021b0
Original Document ID            : xmp.did:67373099-a68c-48ea-8833-030dd908acfa
Document ID                     : xmp.id:1ecf8648-4adf-4ac7-95c0-075bb9e5d6d9
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:622accdd-cfff-468b-9f54-8e6c82e97763
Derived From Document ID        : xmp.did:c92fba0b-e605-469f-a707-3b80f0d88ee2
Derived From Original Document ID: xmp.did:67373099-a68c-48ea-8833-030dd908acfa
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:08:02 09:08:16-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Slug Family                     : ASSA Vesta
Slug Version                    : 1.20
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : --
Slug Font Kind                  : OpenType - PS
Slug Checksum                   : 1968138232
Slug Post Script Name           : ASSAVesta
Slug Font Sense 12 Checksum     : 1968138232
Page Count                      : 52

EXIF Metadata provided by EXIF.tools

Emtek 2018 Multi Point Lock Trim Price Book

Navigation menu

Versions of this User Manual:

Views

Navigation