EnGenius Technologies EAP1200H 2.4GHz b/g/n, 5GHz ac/a/n Indoor AP User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	2601328
Application ID	2toAI6TFabslbOYaoNy4Zg==
Document Description	Users manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	445.64kB (5570453 bits)
Date Submitted	2015-04-30 00:00:00
Date Available	2015-04-30 00:00:00
Creation Date	2015-04-17 13:12:36
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-04-20 18:39:42
Document Title	Users manual.pdf
Document Creator	Adobe InDesign CS6 (Windows)

Business Solutions
User Manual
EAP1200H
version 1.0
Dual Band AC1200 Indoor Access Point
Ceiling Mount Design
IMPORTANT
To install this Access Point please refer to the
Quick Installation Guide included in the product packaging.
Table of Contents
Chapter 1 Product Overview................................................... 4
Key Features/Introduction........................................................... 5
System Requirements / Package Contents .............................. 6
Applications...................................................................................... 7
Technical Specifications............................................................... 8
Physical Interface........................................................................... 9
Chapter 7 Wireless ...............................................................
Wireless Network........................................................................
Wireless Security.........................................................................
Guest Network Settings.........................................................
Fast Roaming...............................................................................
Fast Handover.............................................................................
Wireless MAC Filtering............................................................
Wireless Advanced......................................................................
WPS (Wi-Fi Protected Setup).................................................
WDS Link Settings.......................................................................
Chapter 2 Before You Begin .................................................. 10
Considerations for Wireless Installation............................. 11
Computer Settings..................................................................... 12
Hardware Installation................................................................. 15
Mounting the EAP1200H............................................................. 16
31
31
34
39
40
40
41
42
43
44
Chapter 8 Management........................................................ 45
Administration.............................................................................. 46
Management VLAN Settings................................................. 47
Wireless Traffic Shaping......................................................... 48
SNMP Settings............................................................................... 49
Backup/Restore.......................................................................... 51
Auto Reboot Settings................................................................ 52
Firmware Upgrade/Time Settings............................................ 53
System Log/Tools.......................................................................... 55
Ping Test Parameters/Traceroute Parameters.................. 56
Speed Test Parameters/LED Control.........................................57
Device Display/Reset...................................................................58
Appendix ................................................................................. 59
FCC Interference Statement.................................................. 60
CE Interference Statement...................................................... 61
Chapter 3 Configuring Your Access Point.......................... 18
Default Settings............................................................................ 19
Chapter 4 Building a Wireless Network............................. 20
Access Point Mode....................................................................... 21
WDS AP Mode............................................................................... 22
WDS Bridge Mode........................................................................ 23
Chapter 5 Overview............................................................... 24
Overview........................................................................................... 25
Connections.................................................................................... 26
Chapter 6 Network ................................................................. 27
Operation Mode/Basic...................................................................28
IP Settings/SpanningTree Settings...................................... 29
Chapter 1
Product Overview
Introduction
Key Features
• Up to 26 dBm transmit power, enabling long range connectivity
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to    
    300Mbps(2.4GHz) and 867Mbps(5GHz)
• Four internal 5dBi Omni-Directional MIMO antennas
• Can be monitored after deployment with EnGenius EZ
Controller™ software for Windows
(Free online download)
• Can be used with included power adapter or via PoE with PoE
802.3at - capable Switches or Injectors
• Dual Band/Two Stream
• Band Steering shifts dual band clients to 5 GHz for better
throughput performance
• Secured Guest Network
Introduction
The EAP1200H is a high-powered, long-range, Dual-band
concurrent Wireless 802.11ac/a/b/g/n Access Point with
three major functional modes. It is designed to operate
in numerous environments; from large homes, small and
medium-sized businesses, multiple-floor offices, hotels,
and other venues, to larger enterprise deployments. Its
high-powered, long-range characteristics make it a cost-
effective alternative to ordinary Access Points that don’t
have the range and reach to connect to a growing number
of wireless users who wish to connect to a large home or
business network.
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2015 EnGenius Technologies, Inc. All rights reserved.
System Requirements
The EAP1200H supports the 2.4 GHz frequency band under
the 802.11b/g/n mode while at the same time providing a
5 GHz band for communicating or transferring files in a less
congested network frequency band.
The following are the Minimum System Requirements in
order configure the device:
The EAP1200H also delivers faster wireless speeds
compared to modern 802.11a/b/g/n wireless devices. Even
though the EAP1200H has been designed and engineered
for heavy traffic and demanding business environments,
in larger housing environments as it can efficiently extend
the wireless range of an existing home router. This makes
it especially ideal in architecturally-challenging structures,
providing whole home connectivity.
•
Computer with an Ethernet interface or wireless network
capability
•
Windows OS (XP, Vista, 7, 8), Mac OS, or Linux-based operating
systems
•
Web-Browsing Application (i.e. : Internet Explorer, Firefox,
Chrome, Safari, or another similar browser application)
Package Contents
The EAP1200H package contains the following items (all
items must be in package to issue a refund):
To protect sensitive data during wireless transmissions,
the EAP1200H offers different encryption settings for
wireless transmissions, including industry standard WPA
and WPA2 encryption. The EAP1200H also includes MAC
address filtering to allow network administrators to offer
network access only to known computers and other devices
based on their MAC addresses.
•
EAP1200H Access Point
•
Power Adapter
•
RJ-45 Ethernet Cable
•
Quick Installation Guide
•
Ceiling and Wall Mount Screw kit
Applications
• Training/Educational Facilities: Training sites at corporations or
students at universities use wireless connectivity to exchange
information between peers and easily access information for
learning purposes.
Wireless LAN (WLAN) products are easy to install and
highly efficient. The following list describes some of the
many applications made possible through the power and
flexibility of WLANs:
• Difficult-to-Wire Environments: There are many situations where
wires cannot be installed, deployed easily, or cannot be hidden from
view. Older buildings, sites with multiple buildings, and/or areas
that make the installation of a Ethernet-based LAN impossible,
impractical or expensive are sites where WLAN can be a network
solution.
• Temporary Workgroups: Create temporary workgroups/networks
in more open areas within a building; auditoriums, amphitheaters
classrooms, ballrooms, arenas, exhibition centers, or temporary
offices where one wants either a permanent or temporary Wireless
LAN established.
• The Ability to Access Real-Time Information: Doctors/Nurses,
Point-of-Sale Employees, and/or Warehouse Workers can access
real-time information while dealing with patients, serving
customers, and/or processing information.
• Frequently Changing Environments: Set up networks in
environments that change frequently (i.e.: Show Rooms,
Exhibits, etc.).
• Small Office and Home Office (SOHO) Networks: SOHO users
require a cost-effective, easy, and quick installation of a small
network.
• Wireless Extensions to Existing Ethernet-based Networks:
Devices like the EAP1200H enable network administrators,
installers, and end-users to extend the range and reach of an
existing Ethernet-based network.
Technical Specifications
Security
WEP (64/128bit)
WPA/WPA2 (TKIP/AES)
Hidden ESSID
MAC address filtering, up to 50 fields
L2 Isolation
802.1X Authenticator (MD5/TLS/TTLS/PEAP)
Guest Network
Standard:
IEEE802.11b/g/n on 2.4 GHz
IEEE 802.11ac/a on 5 GHz
IEEE802.3at
Antenna
Four Internal 5 dBi Omni-Directional Antennas
Physical Interface
1 x 10/100/1000 Gigabit Ethernet Port
1 x Reset Button
1 x Power Connector
QoS (Quality of Service)
WMM (Wireless Multimedia)
Physical/Environment Conditions
Operating:
Temperature: 32°F to 104°F (0°C to 40°C)
Humidity (Non-condensing): 90% or less
Storage:
Temperature: -4°F to 140°F (-20°C to 60 °C)
Humidity (Non-condensing): 90% or less
LED Indicator
Power
WPS
WLAN (Wireless Connection)
LAN
Power Requirements
External Power Adapter
DC IN, 12V/2A
Operation Modes
Access Point
WDS AP
WDS Bridge
Physical Interface
Dimensions and Weights
Diameter: 6.36”
Height: 2.17”
1 Reset Button: Press and hold for over 10 seconds to reset to
factory default settings.
4 Power Connector: 12V DC IN for Power.
5 Ceiling (Wall) Mount Hole: Using the provided hardware, the
EAP1200H can be attached to a ceiling or wall.
2 LED Indicators: LED lights for WPS, WLAN 5G, WLAN 2.4G,
Ethernet port, and Power
6 Kensington Security Slot: To protect your EAP1200H, use the
Kensington Security Slot to attach a cable lock.
3 LAN Port (802.3at PoE): Ethernet port for RJ-45 cable.
Chapter 2
Before You Begin
10
Before You Begin
Considerations for Wireless Installation
This section will guide you through the installation process.
Placement of the EnGenius EAP1200H is essential to
maximize the Access Point’s performance. Avoid placing
the EAP1200H in an enclosed space such as a closet,
cabinet, or stairwell.
The operating distance of all wireless devices can often
not be pre-determined due to a number of unknown
obstacles in the environment in which the device is
deployed. Obstacles such as the number, thickness,
and location of walls, ceilings, or other objects that the
EAP1200H’s wireless signals must pass through can
weaken the signal. Here are some key guidelines for
allowing the EAP1200H to have an optimal wireless
range during setup.
• Keep the number of walls and/or ceilings between the EAP1200H
and other network devices to a minimum. Each wall and/or ceiling
can reduce the signal strength, resulting in a lower overall signal
strength.
• Building materials make a difference. A solid metal door and/or
aluminum stubs may have a significant negative effect on the
signal strength of the EAP1200H. Locate your wireless devices
carefully so the signal can pass through drywall and/or open
doorways. Materials such as glass, steel, metal, concrete, water
(example: fish tanks), mirrors, file cabinets, and/or brick can also
diminish wireless signal strength.
• Interference from your other electrical devices and/or appliances
that generate RF noise can also diminish the EAP1200H’s signal
strength. The most common types of devices are microwaves or
cordless phones.
11
Computer Settings
Windows XP/Windows 7/Windows 8
1b. In Windows 8, move your mouse to the lower right hot
corner to display the Charms Bar and select the Control
Panel.
In order to use the EAP1200H, you must first configure the
TCP/IPv4 connection of your Windows OS computer system.
1a. In Windows XP and Windows 7, click the Start button
and open the Control Panel.
Windows 8
2a. In Windows XP, click on Network Connections.
Windows XP
Windows 7
2b. In Windows 7 and Window 8, click View Network
Status and Tasks in the Network and Internet section,
then select Change Adapter Settings.
12
5. Select Use the following IP address and enter an IP
address that is different from the EAP1200H and Subnet
mask, then click OK.
3. Right click on Local Area Connection and select Properties.
Note: Ensure that the IP address and Subnet mask are
on the same subnet as the device.
For example: EAP1200H IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC Subnet mask: 255.255.255.0
4. Select Internet Protocol Version 4 (TCP/IPv4) and then
select Properties.
13
Apple Mac OS X
4. In Configure IPv4, select Manually.
1. Go to System Preferences (it can be opened in the
Applications folder or by electing it in the Apple Menu).
5. Enter an IP address that is different from the EAP1200H
and Subnet mask, then click OK.
2. Select Network in the Internet & Network section.
Note: Ensure that the IP address and Subnet mask are
on the same subnet as the device.
For example: EAP1200H IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC Subnet mask: 255.255.255.0
6. Click Apply when finished.
3. Highlight Ethernet.
14
Hardware Installation
1. Ensure that the computer in use has an Ethernet
Controller port (RJ-45 Ethernet Port). For more
information, verify with your computer’s user manual.
This diagram depicts the hardware configuration.
2. Connect one end of the Category 5e Ethernet cable into
the RJ-45 port of the EAP1200H and the other end to
the RJ-45 port of the computer. Ensure that the cable
is securely connected to both the EAP1200H and the
computer.
3. Connect the Power Adapter DC connector to the DC-IN
port of the EAP1200H and the Power Adapter to an
available electrical outlet. Once both connections are
secure, verify the following:
		 a) Ensure that the POWER light is on (it will be orange).
		 b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will
be blue for 2.4G, and green for 5G).
c) Ensure that the LAN (Computer/
Connection) light is on (it will be blue).
EAP1200H
d) Once all three lights are on, proceed to set up the
Access Point using the computer.
15
Mounting the EAP1200H
Using the provided hardware, the EAP1200H can be
attached to a ceiling or wall.
Leave enough of the screws exposed to ensure that the
unit can be attached to the mounting bracket.
To attach the EAP1200H to a ceiling or wall
using the mounting bracket:
If extra space is required, use the provided spacers and long
screws from the T-Rail mounting hardware kit to increase
the space between the unit and the mounting bracket.
1. Attach the mounting bracket to the wall or ceiling using
the provided wall/ceiling mounting hardware kit.
3. Mount the EAP1200H on the mounting bracket by
rotating the unit clockwise about 90 degrees to secure it
in place.
2. Insert the provided short screws into the bottom cover
of the EAP1200H.
Wall
Mounting Screw
Mounting Bracket
P3.5*32 Screw
P2.6*12 Screw
Lock the EAP1200H by revolving
16
Attaching the EAP1200H to a ceiling using the
provided T-Rail connectors:
1. Attach the T-Rail connectors to the bottom cover of the
EAP1200H using the provided short screws.
2. Line up the connected T-Rail connectors with an
appropriately sized rail and press the unit onto the rail
until it snaps into place.
Note: Two sizes of T-Rail connectors are included in the
mounting hardware kit: 15/16in (2.38cm) and 9/16in
(1.43cm). If extra space is required to accommodate drop
ceiling tiles, use the provided spacers and long screws.
Note: To protect your EAP1200H, use the Kensington
Security Slot to attach a cable lock (cable lock is not
included).
P2.6*25 Screw
T-Rail
P2.6*10 Screw
Clip
Clip
Clips
Spacer
17
Chapter 3
Configuring Your Access Point
18
Configuring Your Access Point
2. The default username and password are: admin. Once
you have entered the correct username and password,
click the Login button to open the web-based
configuration page.
This section will show you how to configure the device
using the web-based configuration interface.
Default Settings
Please use your Ethernet port or wireless network adapter to
connect the Access Point.
IP Address 192.168.1.1
Username/Password admin/admin
Web Configuration
1. Open a web browser (Internet Explorer/Firefox/Safari)
3. If successful, you will be logged in and see the
EAP1200H User Menu.
and enter the IP Address http://192.168.1.1.
Note: If you have changed the default LAN IP Address of
the Access Point, ensure you enter the correct IP Address.
19
Chapter 4
Building a Wireless Network
20
The EAP1200H has the ability to operate in various modes. This chapter describes the operating modes of the EAP1200H.
Access Point Mode
In Access Point Mode, the EAP1200H behaves like a central connection for stations or clients that support IEEE 802.11ac/a/b/
g/n networks. The stations and clients must be configured to use the same SSID (Service Set Identifier) and security password
to associate with the EAP1200H. The EAP1200H supports up to eight (8) SSIDs per band (16 total) at the same time for secure
access.
2.4 GHz
5 GHz
Client
Client
EAP1200H
AP/AP
Client
Client
Client
Client
21
WDS AP Mode
The EAP1200H also supports WDS AP mode. This operating mode allows wireless connections to the EAP1200H using
WDS technology. In this mode, configure the MAC addresses in both Access Points to enlarge the wireless area by enabling
WDS Link settings. WDS supports up to four (4) AP MAC addresses.
5 GHz
Client
Computer
5 GHz
Client
Computer
2.4 GHz
EAP1200H
WDS AP
Client
EAP1200H
WDS AP
Client
2.4 GHz
Client
Client
22
WDS Bridge Mode
In WDS Bridge Mode, the EAP1200H can wirelessly connect different LANs by configuring the MAC address and security
settings of each EAP1200H device. Use this mode when two wired LANs located a small distance apart want to communicate
with each other. The best solution is to use the EAP1200H to wirelessly connect two wired LANs, as shown in the following
figure.
WDS Bridge Mode can establish up to four (4) WDS links, creating a star-like network.
Note: WDS Bridge Mode does not act as an Access Point because Access Points linked by WDS use the same frequency
channel. More Access Points connected together may lower throughput. This configuration can also be susceptible
to generate endless network loops in your network, so it is recommended to enable the Spanning Tree function to
prevent this from happening. You can find information about the Spanning Tree Function on page 31.
Client
Computer
EAP1200H
WDS Bridge
Client
Computer
EAP1200H
WDS Bridge
Client
Computer
EAP1200H
WDS Bridge
23
Chapter 5
Overview
24
Overview
AP mode.
The Overview section contains the following options:
• Device Status
• Connections
The following sections describe these options:
• The LAN Information section under the Connections
link shows the Local Area Network settings such as the
LAN IP Address, Subnet mask, Gateway, DNS Address,
DHCP Client, and STP status.
Device Status
Clicking the Device Status link under the Overview menu
shows the status information about the current operating
mode.
•
• The Current 2.4 GHz/5 GHz Wireless Settings section
under the Basic link shows wireless information such
as Operating Mode, Frequency, and Channel. Since the
EAP1200H supports multiple-SSIDs, information about
each SSID and security settings are displayed.
The Device Status section shows general system
information such as Device Name, MAC address, Current
Time, Firmware Version, and Management VLAN ID
Note: Profile Settings is only applicable in Access Point
or WDS AP mode.
Note: VLAN ID is only applicable in Access Point or WDS
25
Connections
The EAP1200H automatically logs (records) events of
possible interest in its internal memory. To view the
logged information, click the Connections link under
the Device Status menu. If there is not enough internal
memory to log all events, older events are deleted from
the log. When powered down or rebooted, the log will be
cleared.
Click Refresh to refresh the Connections List page.
26
Chapter 6
Network
27
Operation Modes
Operation Mode: Use the radio button to select an
operating mode.
The EAP1200H supports three operating modes:
Band Steering: Enable Band Steering to sends 802.11n
clients to the 5 GHz band, where 802.11b/g clients
cannot go, and leaves the 802.11b/g clients in 2.4 GHz to
operate at their slower rates. Band Steering works within
the Access Point by directing 5 GHz-capable clients to
that band.
Access Point, WDS AP, and WDS Bridge.
Device Settings
*Note: In order for the Band Steering function to work
properly, both the 2.4 Ghz and the 5 GHz SSID and security
settings must be under the same selection settings.
Basic
This page allows you to modify the device’s IP settings.
To access operation mode, click the Wireless section under
Network in the sidebar. You will see wireless settings
customizable options for both the 2.4 GHz and 5 GHz
modes. Under Wireless settings, you will see:
Device Name: Enter a name for the device. The name you
type appears in SNMP management. This name is not the
SSID and is not broadcast to other devices.
Country/Region: Select a Country/Region to conform to
local regulations.
28
IP Network Settings
Select whether the device IP address will use the static
IP address specified in the IP Address field or be obtained
automatically when the device connects to a DHCP server.
IP Address: The IP Address of this device.
Spanning Tree Status: Enables or disables the Spanning
Tree function.
IP Subnet Mask: The IP Subnet mask of this device.
Gateway: The Default Gateway of this device. Leave it
blank if you are unsure of this setting.
Hello Time: Specify Bridge Hello Time, in seconds. This
value determines how often the device sends handshake
packets to communicate information about the topology
throughout the entire Bridged Local Area Network.
Primary/Secondary DNS: The primary/secondary DNS
address for this device.
Click Saveto confirm the changes.
Max Age: Specify Bridge Max Age, in seconds. If another
bridge in the spanning tree does not send a hello packet for
a long period of time, it is assumed to be inactive.
Spanning Tree Settings
This page allows you to modify the Spanning Tree settings.
Enabling Spanning Tree protocol will prevent network loops
in your LAN network.
29
Forward Delay: Specifes Bridge Forward Delay, in seconds.
Forwarding Delay Time is the time spent in each of the
Listening and Learning states before the Forwarding state
is entered. This delay is provided so that when a new bridge
comes onto a busy network, it analyzes data traffic before  
participating.
Priority: Specify the Priority Number. A smaller number has
greater priority.
Save: Click Save to confirm the changes.
30
Chapter 7
2.4GHz & 5GHz Wireless
31
Wireless Network
This page displays the current status of the Wireless
settings of the EAP1200H.
Channel/Frequency: Select the channel and frequency
appropriate for your country’s regulation.
Access Point/WDS AP mode:
Auto: Check this option to the enable the Auto-Channel
feature.
RTS/CTS Threshold: Specifies the threshold package size
for RTC/CTS. A small number causes RTS/CTS packets to be
sent more often and consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data packets into one packet. This
option reduces the number of packets, but also increases
packet sizes.
AP Detection: AP Detection can select the best channel to
use by scanning nearby areas for Access Points.
Wireless Mode: Supports 802.11b/g/n mixed mode in
2.4GHz and 802.11ac/a/n mixed mode in 5GHz.
Current Profile: You can configure up to eight different
SSIDs (4 in WDS AP mode). If multiple client devices will be
accessing the network, you can arrange the devices into
SSID groups. Click Edit to configure the profile and check
whether you  wish to enable extra SSIDs.
Channel HT Mode: The default channel bandwidth is
20/40/80MHz. The larger the channel, the better the
transmission quality and speed.
Extension Channel: Select Upper or Lower channel. Your
selection may affect the Auto Channel function.
Save: Click Save to confirm the changes.
32
2.4GHz/5 GHz SSID Profile
Wireless Security: See the Wireless Security section on
page 36.
Under Wireless Settings, you can edit the SSID profile to
fit your needs. Click Edit under the SSID you would like to
make changes to.
Isolation: Check the box to Enable or Disable the Isolation
feature.
Save: Click Save to accept the changes.
SSID: Specifies the SSID for the current profile.
Suppressed SSID: Check this option to hide the SSID from
clients. If checked, the SSID will not appear in the site survey.
Station Separation: Click the appropriate button to allow
or prevent communication between client devices.
33
Wireless Security
WEP Encryption:
The Wireless Security section lets you configure the
EAP1200H’s security modes:
WEP
WPA-PSK
WPA2-PSK
WPA-PSK Mixed
WPA-Enterprise
WPA2-Enterprise
Auth Type: Select Open System or Shared Key.
WPA Mixed Enterprise.
Input Type: ASCII: Regular Text (Recommended)
It is strongly recommended that you use WPA2-PSK. Click
on the Edit button under Wireless Settings next to the SSID
to change the security settings.
HEX: Hexadecimal Numbers (For advanced users)
Key Length: Select the desired option and ensure the
wireless clients use the same setting. Your choices are: 64,
128, and 152-bit password lengths.
Default Key: Select the key you wish to be default.
Transmitted data is ALWAYS encrypted using the Default
Key; the other Keys are for decryption only. You must enter
a Key Value for the Default Key.
34
WPA2-PSK Encryption:
Encryption Key: Enter the Key Value or values you wish to
use. The default is none.
WPA-PSK (WPA Pre-Shared Key) Encryption:
Encryption: Select the WPA encryption type you would
like to use. Please ensure that your wireless clients use
the same settings.
Passphrase: Wireless clients must use the same Key to
associate the device. If using ASCII format, the Key must
be from 8 to 63 characters in length. If using HEXformat,
the Key must be 64 HEX characters in length.
Encryption: Select the WPA encryption type you would like
to use. Please ensure that your wireless clients use the
same settings.
Group Key Update Interval: Specify how often, in
seconds, the Group Key changes.
Passphrase: Wireless clients must use the same Key to
associate the device. If using ASCII format, the Key must
be from 8 to 63 characters in length. If using HEXformat,
the Key must be 64 HEX characters in length.
Group Key Update Interval: Specify how often, in seconds,
the Group Key changes.
35
WPA-PSK Mixed Encryption:
WPA-Enterprise Encryption:
Encryption: Select the WPA encryption type you would like
to use. Please ensure that your wireless clients use the
same settings.
Encryption: Select the WPA encryption type you would like.
Please ensure that your wireless clients use the same settings.
Passphrase: Wireless clients must use the same Key to
associate the device. If using ASCII format, the Key must
be from 8 to 63 characters in length. If using HEXformat,
the Key must be 64 HEX characters in length.
Group Key Update Interval: Specify how often, in seconds,
the group key changes.
Radius Server: Enter the IP address of the Radius server.
Group Key Update Interval: Specify how often, in seconds,
the group key changes.
Radius Port: Enter the port number used for connections
to the Radius server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius Accounting: Enables or disables the accounting
feature.
36
WPA2Enterprise Encryption:
Radius Accounting Server: Enter the IP address of the
Radius accounting server.
Radius Accounting Port: Enter the port number used for
connections to the Radius accounting server.
Radius Accounting Secret: Enter the secret required to
connect to the Radius accounting server.
Interim Accounting Interval: Specify how often, in
seconds, the accounting data sends.
Encryption: Select the WPA encryption type you would like.
Please ensure that your wireless clients use the same settings.
Note: 802.11n does not allow WEP/WPA-PSK TKIP/
WPA2-PSK TKIP security mode. The connection mode will
automatically change from 802.11n to 802.11g.
Group Key Update Interval: Specify how often, in seconds,
the group key changes.
Radius Server: Enter the IP address of the Radius server.
Radius Port: Enter the port number used for connections
to the Radius server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius Accounting: Enables or disables the Radius
accounting feature.
37
WPA Mixed Enterprise Encryption:
Radius Accounting Server: Enter the IP address of
the Radius accounting server.
Radius Accounting Port: Enter the port number used
for connections to the Radius accounting server.
Radius Accounting Secret: Enter the secret required
to connect to the Radius accounting server.
Interim Accounting Interval: Specify how often, in
seconds, the accounting data sends.
Note: 802.11n does not allow WEP/WPA-PSK TKIP/
WPA2-PSK TKIP security mode. The connection mode
will automatically change from 802.11n to 802.11g.
Encryption: Select the WPA encryption type you would
like. Please ensure that your wireless clients use the
same settings.
Group Key Update Interval: Specify how often, in
seconds, the group key changes.
Radius Server: Enter the IP address of the Radius
server.
Radius Port: Enter the port number used for
connections to the Radius server.
Radius Secret: Enter the secret required to connect
to the Radius server.
Radius Accounting: Enables or disables the Radius
accounting feature.
38
Radius Accounting Server: Enter the IP address of
the Radius accounting server.
Radius Accounting Port: Enter the port number used
for connections to the Radius accounting server.
Radius Accounting Secret: Enter the secret required
to connect to the Radius accounting server.
Interim Accounting Interval: Specify how often, in
seconds, the accounting data sends.
SSID: Specified the SSID for the current profile.
Note: 802.11n does not allow WEP/WPA-PSK TKIP/
WPA2-PSK TKIP security mode. The connection
mode will automatically change from 802.11n to
802.11g.
Hidden SSID: Check this option to hide SSID from
clients, If checked, this SSID will not appear in the AP
detect.
Client Isolation: Click the appropriate radio button
to allow or prevent communication between client
devices.
Guest Network Settings
IP address: The IP Address of this device.
Adding a guest network to allow visitors to use the
internet without giving out your office or company
wireless security. You can add a guest network to each
wireless network in the 2.4GHz frequencies and 5GHz
frequencies.
Subnet Mask: The IP Subnet mask of this device.
Starting IP Address: The first IP Address in the range
of the addresses by the DHCP server.
Ending IP Address: The last IP Address in the range of
addresses assigned by the DHCP server.
39
Fast Handover
Fast Roaming
Enable the Fast Handover feature by ensuring that
each client is served by at least one Access Point at
any time. Access Points continuously monitor the
connectivity quality of any client in their range and
efficiently share this information with other Access
Points in the vincinity of that client to coordinate
which of them should serve the client best.
Enable the function to serve mobile client devices
that roam from access point to access point. Some
applications roam on client devices require fast reassociation when they roam to a different access
point.
Please enter the settings of the SSID and initialize
the Security mode to WPA-Mixed, WPA2 enterprise,
WPA2-PSK, WPA-Mixed Enterprise as well as to set the
RADIUS server firstly. User can enable Fast Roaming.
Please also set the same encryption under the same
SSID on other access point and enable Fast Roaming.
When the configuration is activated on different
access point, the mobile client devices can run the
voice service and require seamless roaming to prevent
delay in conversation from access point to access
point.
RSSI: Enter the RSSI (Received Signal Strength Index)
in order to determine the handover procedure which
the current wireless link will terminate. RSSI is an
indication of the power level being received by the
antenna. Therefore, the higher the RSSI number, the
stronger the signal.
40
Wireless MAC Filtering
ACL (Access Control List) Mode: Determines whether
network access is granted or denied to clients whose MAC
addresses appear in the MAC address table on this page.
Choices given are: Disabled, Deny MAC in the list, or Allow
MAC in the list.
Wireless MAC Filtering is used to allow or deny network
access to wireless clients (computers, tablet PCs, NAS,
smartphones, etc.) according to their MAC addresses. You
can manually add a MAC address to restrict permission to
access EAP1200H. The default setting is: Disable Wireless
MAC Filter.
MAC Address: Enter the MAC address of the wireless client.
Note: Only applicable in Access Point and WDS AP mode.
Add: Click Add to add the MAC address to the MAC Address
table.
Delete: Deletes the selected entries.
Save: Click Save to apply the changes.
41
Wireless Advanced
This page allows you to configure wireless advanced
settings. It is recommended that the default settings are
used unless the user has experience with more advanced
networking features.
Data Rate: Select a data rate from the drop-down list. The
data rate affects throughput of data in the EAP1200H.
The lower the data rate, the lower the throughput, though
transmission distance will be lowered as well.
2.4 GHz/5 GHz Wireless Advanced
Transmit Power: Set the power output of the wireless
signal.
RTS/CTS Threshold: Specify the threshold package size
for RTC/CTS. A smaller number causes RTS/CTS packets to
be sent more often and in turn consumes more bandwidth.
Distance: Specify the distance between Access Points and
clients. Longer distances may drop high-speed connections.
Aggregation: Merges data packets into one packet. This
option reduces the number of packets, but increases packet
sizes.
Save: Click Save to confirm the changes.
42
WPS (Wi-Fi Protected Setup)
Configured or Unconfigured. When it is configured, the
WPS has been used to authorize a connection between the
device and wireless clients.
The Wi-Fi Protected Setup (WPS) feature complies with the
Wi-Fi Alliance WPS standard and makes it easier to quickly
add client devices to an established, security-enabled Wi-Fi
network.
Self Pin Code: The PIN code of this device.
WPS reduces the user steps required to configure a network
and supports two methods that are familiar to most
consumers to configure a network and enable security.
SSID: The SSID (wireless network name) used when
connecting using WPS.
Authentication Mode: Shows the encryption method used
by the WPS process.
Note: Only applicable in Access Point and WDS AP
mode.
Passphrase Key: This is the passphrase key that is randomly
generated during the WPS process. It is required if wireless
clients that do not support WPS attempt to connect to the
wireless network.
WPS (Wi-Fi Protected Setup)
WPS via Push Button: Click this button to initialize the
WPS feature using the Push Button method.
WPS via PIN: Enter the PIN code of the wireless device
and click this button to initialize WPS feature using the PIN
method.
Save: Click Save to confirm the changes.
WPS: Select to Enable or Disable the WPS feature.
WPS Current Status: Shows whether the WPS function is
43
WDS Link Settings
2.4 GHz/5 GHz WDS Link Settings
Using WDS (Wireless Distribution System) will allow
a network administrator or installer to connect to
Access Points wirelessly. Doing so will extend the wired
infrastructure to locations where cabling is not possible or
inefficient to implement.
Note: Compatibility between different brands and
models of Access Points is not guaranteed. It is
recommended that the WDS network be created using
the same models for maximum compatibility.
Security: Select None or AES from the drop-down list.
Also Note: All Access Points in the WDS network must
use the same Channel and Security settings.
AES Passphrase: Enter the Key Values you wish to use.
Other AP(s) must use the same key to establish WDS link.
To create a WDS network, please enter the MAC addresses
of the Access Points that you want included in the WDS.
There can be a maximum of four Access Points.
MAC Address: Enter the Access Point’s MAC address to
which you want to extend the wireless area.
Mode: Select Disable or Enable from the drop-down list.
Note: Only applicable in WDS AP and WDS Bridge modes.
Save: Click Save to confirm the changes.
44
Chapter 8
Management
45
Administration
Apply: Click Apply to save the changes.
This page allows you to change the EAP1200H username
and password. By default, the username is admin and the
password is admin. The password can contain from 0 to 12
alphanumeric characters and is case sensitive.
Note: it is highly reccomended that you change you
password to something more unique for greater security.
Username: admin
Password: admin
Account Setting
New Name: Enter a new username for logging in to the
New Name entry box.
Old Password: Enter the old password for logging in to the
Old Password entry box.
New Password: Enter the new password for logging in to
the New Password entry box.
Confirm Password: Re-enter the new password in the
Confirm Password entry box for confirmation.
46
Management VLAN Settings
This page allows you to assign a VLAN tag to the packets. A
VLAN is a group of computers on a network whose software
has been configured so that they behave as if they were on
a separate Local Area Network (LAN). Computers on VLAN
do not have to be physically located next to one another
on the LAN.
VLAN ID (VID): Specifies the VLAN tag for each profile.
Management VLAN ID: If your network includes VLANs,
you can specify a VLAN ID for packets pass through the
Access Point with a tag. Otherwise, select no VLAN tag.
To configure VLAN tags, you must first Isolate and enter
a VID before enabling VLAN under Management VLAN ID.
Save: Click Save to confirm the changes.
Note:
Note: Only applicable in Access Point and WDS AP mode.
1. If you reconfigure the Management VLAN ID, you may
lose your connection to the EAP1200H. Verify that the
DHCP server supports the reconfigured VLAN ID, then
reconnect to the EAP1200H using the new IP address.
Profile Isolation: Restrict clients from communicating with
different VIDs by checking the Isolation box for the SSID
you wish to select under the Wireless Settings funtion.
47
Wireless Traffic Shaping
Traffic Shaping regulates the flow of packets leaving an
interface to deliver improved Quality of Service. To edit
Wireless Traffic Shaping, click Edit for the SSID you would
like to configure under Wireless Settings.
Enable Traffic Shaping: select this option from the dropdown box to enable Wireless Traffic Shaping.
Download Limit: Specifies the wireless transmission speed
used for downloading.
Upload Limit: Specifies the wireless transmission speed
used for uploading.
Save: Click Save to confirm the changes.
48
SNMP Settings
Status: Enables or Disables the SNMP feature.
This page allows you to assign the Contact Details, Location,
Community Name, and Trap Settings for Simple Network
Management Protocol (SNMP). This is a networking
management protocol used to monitor network attached
devices. SNMP allows messages (called protocol data units) to
be sent to various parts of the network. Upon receiving these
messages, SNMP compatible devices (called agents) returns
the data stored in their Management Information Bases. To
configure SNMP Settings, click under the Advanced tab on
the side bar under Management.
Contact: Specifies the contact details of the device.
Location: Specifies the location of the device.
Port: Displays the port number.
Community Name (Read Only): Specifies the password
for the SNMP community for read only access.
Community Name (Read/Write): Specifies the password
for the SNMP community with read/write access.
Trap Destination Address: Specifies the port and IP
address of the computer that will receive the SNMP traps.
Trap Destination Community Name: Specifies the
password for the SNMP trap community.
SNMPv3 Status: Enables or Disables the SNMPv3 feature.
User Name: Specifies the username for the SNMPv3.
feature
Auth Protocol: Select the Authentication Protocol type:
MDS or SHA.
Auth Key: Specify the Authentication Key for authentication.
49
Priv Protocol: Select the Privacy Protocol type: DES.
Priv Key: Specifies the privacy key for privacy.
Engine ID: Specifies the Engine ID for SNMPv3.
Save: Click Save to apply the changes.
50
Backup/Restore
Factory Settings
This page allows you to save the current device
configurations. When you save the configurations,
you can also reload the saved configurations into the
device through the Restore Saved Settings from a file
folder. If extreme problems occur, or if you have set the
EAP1200H incorrectly, you can use the Factory Default
button in the Revert to Factory Default Settings section
to restore all the configurations of the EAP1200H to
the original default settings. To Configure the Backup/
Restore Settings, click Firmware under the Systems
Manager tab.
Backup Settings: To restore settings that have been
previously backed up, click Export, select the file, and
click Restore.
Restore New Setting: Choose the file you wish restore
for settings and click Import.
Reset to Default: Click the Reset button to restore the
EAP1200H to its factory default settings.
User Settings
Back Up Setting as Default: Click Backup to backup the
user settings you would like to use as the default settings.
Restore to User Default: Click Restore to restore user
settings to the factory standard settings.
51
Auto Reboot Settings
You can specify how often you would like to reboot
the EAP1200H. To configure the Auto Reboot settings,
click the Wi-Fi Scheduler tab on the side bar under
Management.
Auto Reboot Setting: Enables or disables the Auto
Reboot function.
Frequency of Auto Reboot: Specifies the time and
frequency in rebooting the EAP1200H by Min, Hour,
Day and/or Week.
Click Save to apply the changes.
52
Firmware Upgrade
Date and Time Settings
This page allows you to upgrade the Firmware of the
EAP1200H.
This page allows you to set the internal clock of the
EAP1200H. To access the Date and Time settings, click
Time Zone under the Management tab on the side bar.
To Perform the Firmware Upgrade:
1. Click the Choose File button and navigate the OS File
System to the location of the Firmware upgrade file.
Manually Set Date and Time: Manually specify the
date and time.
2. Select the upgrade file. The name of the file will appear
in the Upgrade File field.
Synchronize with PC: Click to Synchronize the
EAP1200H with the computer’s internal clock.
3. Click the Upload button to commence the Firmware
upgrade.
Automatically Get Date and Time: Enter the IP address
of an NTP server or use the default NTP server to have
the internal clock set automatically.
Note: The device is unavailable during the upgrade
process and must restart when the upgrade is completed.
Any connections to or through the device will be lost.
Time Zone: Choose the time zone you would like to use
from the drop-down list.
Enable Daylight Savings: Check the box to enable or
53
disable daylight savings time for ther EAP1200H. Next,
enter the dates that correspond to the present year’s
daylight savings time.
Click Apply to save the changes.
would like to remote to.
Log Server IP Address: Enter the IP address of the log
server.
Apply: Click Apply to save the changes.
54
System Log
Tools
This page allows you to setup the System Log and local
log functions of the EAP1200H. Click Log under the
Systems Manager tab to open up the System Log page.
This page allows you to analyze the connection quality
of the EAP1200H and trace the routing table to a target
in the network.
Status: Enables or disables the System Log function.
Log Type: Select the Log Type mode you would like to
use.
Remote Log: Enables or disables the Remote Log
feature. If enabled, enter the IP address of the Log you
55
Ping Test Parameters
Traceroute Parameters
Target IP/Domain Name: Enter the IP address you
would like to search.
Target IP/Domain Name: Enter an IP address or domain
name you wish to trace.
Ping Packet Size: Enter the packet size of each ping.
Start: Click Start to begin the trace route operation.
Number of Pings: Enter the number of times you wish
to ping.
Stop: Halts the traceroute test.
Start Ping: Click Start Ping to begin pinging target
device (via IP).
56
Speed Test Parameters
LED Control
Target IP/Domain Name: Enter an IP address or
domain name you wish to run a Speed Test for.
This page allows you to control the LED control functions:   
Power status, LAN interface, 2.4G/5G WLAN interface
and WPS.
Time Period/Check Interval: Enter the time in
seconds that you would like the test to run for and in
how many intervals.
Click Apply to save the settings after selecting your
choices from the drop-down boxes.
Start: Starts the Speed Test.
57
Device Discovery
Under Device Discovery, you can choose for the EAP1200H
to Automatically scan for local devices to connect to. Click
Scan to begin the process.
Reset
In some circumstances, you may be required to force the
device to reboot. Click on Reboot the Device to reboot
the EAP1200H.
58
Appendix
59
Appendix A
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that  to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25 GHz band
are restricted to indoor usage only.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 25 cm between the radiator & your body.
60
Appendix B - CE Interference Statement
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order
to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
• EN60950-1
		 Safety of Information Technology Equipment
• EN50385
		 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure
to electromagnetic fields (0 Hz - 300 GHz)
• EN 300 328
		 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating
in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article
3.2 of the R&TTE Directive
• EN 301 893
		 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of
the R&TTE Directive
• EN 301 489-1
		 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common technical requirements
• EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
61
This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France
and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting
up outdoor radio links and/or for supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP
in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
Česky [Czech]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch [German]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti [Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Español [Spanish]
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales
y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
62
Français [French]
Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conforme aux exigences essentielles et aux
autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst Direktīvas
1999/ 5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen
en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese]
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti
oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian]
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC
irányelv egyéb elõírásainak.
Polski [Polish]
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi
stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese]
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Slovensko [Slovenian]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Slovensky [Slovak]
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice
1999/5/ES.
Suomi [Finnish]
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska [Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
63

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2015:04:17 13:12:36+08:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2015:04:20 18:39:42+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:04:20 18:39:42+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:c3ac5bbc-765d-4ccc-b114-f0ca8b0c02cb
Original Document ID            : xmp.did:C4416EC81C206811822AF00EF18081D8
Document ID                     : xmp.id:4FB48C7DBFE4E411B20F8AD035E7196C
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7FFD3A08B2E4E411B6159B6F559881E8
Derived From Document ID        : xmp.did:3744EAFBAEE4E411B6159B6F559881E8
Derived From Original Document ID: xmp.did:C4416EC81C206811822AF00EF18081D8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:04:17 13:12:36+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 63

EXIF Metadata provided by EXIF.tools