EnGenius Technologies ECM955AP AC1300 Wave2 Dual Band Outdoor Cloud management Base Station User Manual User Manaul

Download:
Mirror Download [FCC.gov]
Document ID	4101031
Application ID	qo9E2ShrcWP+RYIVaZlfXw==
Document Description	User Manaul
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.7kB (283690 bits)
Date Submitted	2018-12-10 00:00:00
Date Available	2018-12-13 00:00:00
Creation Date	2018-12-10 16:52:34
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2018-12-10 16:52:48
Document Title	User Manaul
Document Creator	Adobe InDesign CS6 (Windows)

Business Solutions
User Manual
ECM355AP
ECM855AP
ECM955AP
ECM355AP 802.11 abgn/ac Indoor AP
ECM855AP Wireless 802.11 abgn/ac Outdoor AP
ECM955AP AC1300 Wave2 Dual Band Outdoor Cloud Management Base Station
version 1.1
IMPORTANT
To install this Access Point please refer to the
Quick Installation Guide included in the product packaging.
Table of Contents
Chapter 1 Product Overview...................................................................... 4
Introduction...................................................................................................5
ECM355AP
Key Features.................................................................................... 5
Package Contents......................................................................... 5
Physical Interface......................................................................... 6
ECM855AP
Key Features.................................................................................... 7
Package Contents......................................................................... 7
Physical Interface......................................................................... 8
ECM955AP
Key Features.................................................................................... 9
Package Contents......................................................................... 9
Physical Interface......................................................................... 10
Technical Specifications.........................................................................11
Chapter 2 Configuring Your Access Point............................................13
Default Settings./Web Configuration.......................................... 14
Appendix..............................................................................................................15
FCC Interference Statement...........................................................16
Professional installation instruction...........................................19
Chapter 1
Product Overview
Introduction
ECM355AP
Key Features
Package Contents
• Up to 26 dBm transmit power enabling long range connectivity
The ECM355AP package contains the following items:*
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to
300 Mbps data rate on 2.4GHz band and 867Mbps on 5GHz
band
• ECM355AP Access Point
• Can be monitored after deployment with ezmCloud for Windows
• Mounting Screw Set
• Can be power up with Proprietary 54V PoE.
• Quick Installation Guide
• Ceiling Mount Bracket
• Fast Transition and Handover between Access Points
*(all items must be in package to issue a refund):
• Band Steering shifts client devices to a proper frequency band
for getting more bandwidth and speed under an Access Point.
• Secured Guest Network option available
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2018 EnGenius Technologies, Inc. All rights reserved.
Physical interface
1 LAN Port 1 (802.3at PoE Input): Ethernet port for RJ-45 cable.
2 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2,
2.4 GHz Connection and 5 GHz Connection.
3 DC in
4 Reset button
Dimensions and Weights
Length: 200mm
Width: 200mm
Depth: 45mm”
Weight: TBD
ECM855AP
Key Features
Package Contents
• Up to 23 dBm transmit power enabling long range connectivity
The ECM855AP package contains the following items:*
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to
300 Mbps data rate on 2.4GHz band and 867Mbps on 5GHz band
• ECM855AP Access Point
• Two detachable 4.5 dBi 2.4 GHz Omni-directional antennas
• 2 detachable 4.5 dBi 2.4 GHz Omni-directional Antenna
• Two detachable 6.3 dBi 5 GHz Omni-directional antennas
• 2 detachable 6.3 dBi 5 GHz Omni-directional Antenna
• Can be monitored after deployment with ezmCloud for Windows.
• Wall Mount Screw set
• Can be used with included power adapter or via PoE with
Proprietary 54V.
• Ground cable and Screw for ground use
• Wall Mounting plate, Mounting Bracket, Screw set kit
• Fast Transition and Handover between Access Points
• Quick Installation Guide
• Band Steering shifts client devices to a proper frequency band
for getting more bandwidth and speed under an Access Point.
*(all items must be in package to issue a refund)
• Secured Guest Network option available
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2018 EnGenius Technologies, Inc. All rights reserved.
Physical interface
1 2.4 GHz Antennas: Detachable 4.5 dBi 2.4 GHz Omni-directional
2 5 GHz Antennas Detachable 6.3 dBi 5 GHz Omni-directional
3 LAN Port 1 (802.3at PoE Input): Ethernet port for RJ-45 cable.
4 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2,
2.4 GHz Connection and 5 GHz Connection.
5 Mounting Holes: Using the provided hardware, the ECM855AP
can be attached to a wall or pole.
*The installation angle of antenna must be vertical to the ground.
Dimensions and Weights
Length: 218.7mm
Width: 124.0mm
Depth: 56.2mm”
Weight: 2.04kg
ECM955AP
Package Contents
Key Features
The ECM955AP package contains the following items:*
• Up to 29dBm transmit power enabling long range connectivity
• ECM955AP Access Point
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to
300 Mbps data rate on 2.4GHz band and 867Mbps on 5GHz band
• 2 detachable 5 dBi 2.4 GHz Omni-directional Antenna
• 2 detachable 7 dBi 5 GHz Omni-directional Antenna
• Two detachable 5 dBi 2.4 GHz Omni-directional antennas
• 1 LTE Antenna
• Two detachable 7 dBi 5 GHz Omni-directional antennas
• 1 GPS Antenna
• Can be monitored after deployment with EnGenius ezmCloud
• Ground cable
• Can be used with included power adapter or via PoE with
Proprietary 54V.
• Wall Mounting plate, Mounting Bracket, Screw set kit
• Fast Transition and Handover between Access Points
• Quick Installation Guide
• Band Steering shifts client devices to a proper frequency band
for getting more bandwidth and speed under an Access Point.
*(all items must be in package to issue a refund)
• Secured Guest Network option available
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2018 EnGenius Technologies, Inc. All rights reserved.
Physical interface
1 2.4 GHz Antennas: Detachable 5 dBi 2.4 GHz Omni-directional,
2 5 GHz Antennas Detachable 7 dBi 5 GHz Omni-directional
6 7
3 LAN Port 1 (802.3at PoE Input): Ethernet port for RJ-45 cable.
4 LAN Port 2 (802.3af PSE Output): Ethernet port for RJ-45 cable.
5 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2,
2.4 GHz Connection and 5 GHz Connection.
6 Locate GPS
7 Scanning Radio
*The installation angle of antenna must be vertical to the ground.
Dimensions and Weights
Length: 285mm
Width: 218mm
Depth: 55.5mm”
Weight: TBD
10
Technical Specifications
Standard:
IEEE802.11ac/a/n on 5 GHz
IEEE802.11b/g/n on 2.4 GHz
IEEE802.3at
Control
CLI Supported
Distance Control (Ack Timeout)
802.1X Supplicant (CB Mode)
Multicast Supported
Auto Reboot
Obey Regulatory Power
LED Indicator
Power
LAN
2.4 GHz
5 GHz
Security
WPA2 Personal
WPA2 Enterprise
Hides SSID in beacons
MAC address filtering, up to 32 MACs
Wireless STA (Client) connection list
Https Support
SSH Support
Operation Modes
Access Point
Client Bridge
WDS AP
WDS Bridge
WDS Station
QoS (Quality of Service)
Complaint with IEEE 802.11e standard
Management
Auto Channel Selection
Multiple SSID: 8 SSIDs per Radio
BSSID
SNMP V1/V2c/V3
MIB I/II, Private MIB
VLAN Tag/VLAN Pass-through
Clients Statistics
Save Configuration as User Default
Fast Roaming
E-Mail Alert
RADIUS Accounting
Guest Network
Physical/Environment Conditions
Operating:
ECM355AP
Temperature: 32 °F to 122 °F (0 °C to 50 °C)
Humidity (non-condensing): 0%~90% typical
ECM855AP
Temperature: -4 °F to 158 °F (-20 °C to 70 °C)
Humidity (non-condensing): 0%~90% typical
ECM955AP
Temperature: -4 °F to 158 °F (-20 °C to 70 °C)
Humidity (non-condensing): 0%~90% typical
11
Storage:
ECM355AP
Temperature: -40 °F to 176 °F (-40 °C to 80 °C)
Humidity (non-condensing): 0%~90% typical
ECM855AP
Temperature: -40°F to 176 °F (-40 °C to 80 °C)
Humidity (non-condensing): 0%~90% typical
ECM955AP
Temperature: -40°F to 176 °F (-40 °C to 80 °C)
Humidity (non-condensing): 0%~90% typical
System Requirements
The following are the Minimum System Requirements in order to
configure the device.
• Computer with an Ethernet interface or wireless network capability
• Windows OS(XP, Vista, 7, 8, 10), Mac OS, or Linux-based operating
systems
• Web-Browsing Application (i.e.: Internet Explorer, Firefox, Safari, or
another similar browser application)
12
Chapter 2
Configuring Your
Access Point
13
Configuring Your Access Point
This section will show you the configuration function and status
overview on the web-based interface. For more detail settings please
use the cloud platform.
Default Settings
Please use your Ethernet port or wireless network adapter to
connect the Access Point.
3.If successful, you will be logged in and see the interface of this
IP Address 192.168.1.1
Username / Password admin / admin
Access Point.
Web Configuration
1.Open a web browser (Internet Explorer/Firefox/Safari/Chrome)
and enter the IP Address http://192.168.1.1
Note: If you have changed the default LAN IP Address of the
*The model name will be varied by different models.
Access Point, ensure you enter the correct IP Address.
Device Status: You can see the device overview and network
2.The default username and password are admin. Once you have
connectivity status.
entered the correct username and password, click the Login
button to open the web-base configuration page.
Local Setting: You can set the IPv4,IPv6, Spanning Tree Protocal(STP)
,firmware upgrade and Miscellaneous in this page. For other
configuration you can implement in cloud platform.
14
Appendix
15
Appendix A
Federal Communication Commission Interference Statement-ECM355AP
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that  to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operations in the 5.15-5.25GHz band are restricted to indoor.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to
indoor use only.
16
Appendix A
Federal Communication Commission Interference Statement-ECM855AP
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that  to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 21 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to
outdoor use only.
17
Appendix A
Federal Communication Commission Interference Statement-ECM955AP
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that  to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to
outdoor use only.
18
Appendix B -Professional installation instruction-ECM855AP
1. Installation personal
This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 21cm from nearby person in normal operation condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or
excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant
rules. The violation of the rule could lead to serious federal penalty.
19
Appendix B -Professional installation instruction-ECM955AP
1. Installation personal
This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 20cm from nearby person in normal operation condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or
excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant
rules. The violation of the rule could lead to serious federal penalty.
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2018:12:10 16:52:34+08:00
Metadata Date                   : 2018:12:10 16:52:48+08:00
Modify Date                     : 2018:12:10 16:52:48+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:51d7d211-c15d-4571-a729-d12a5d8b16c7
Original Document ID            : xmp.did:C4416EC81C206811822AF00EF18081D8
Document ID                     : xmp.id:B382CDC558FCE8119FFAED9268B22794
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:B282CDC558FCE8119FFAED9268B22794
Derived From Document ID        : xmp.did:4B5F83A9ABDDE81184078006E7C53472
Derived From Original Document ID: xmp.did:C4416EC81C206811822AF00EF18081D8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2018:12:10 16:52:35+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 20
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools