Endress and Hauser SE KG FMR53X Fluid Level Radar Transmitter User Manual FMR53x Deckbl FCC

Download:
Mirror Download [FCC.gov]
Document ID	112953
Application ID	OmB6YksXcyPZNTfwIrWAAQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.19kB (52403 bits)
Date Submitted	2000-08-11 00:00:00
Date Available	2001-07-05 00:00:00
Creation Date	2000-08-11 20:30:01
Producing Software	Acrobat PDFWriter 3.02 für Windows NT
Document Lastmod	2000-08-11 20:30:44
Document Title	FMR53x_Deckbl_FCC.PDF
Document Creator	Microsoft Word - FMR53x_Deckbl_FCC.doc
Document Author:	Steinebrunner-E

1 Safety instructions
Micropilot S FMR 530
Safety instructions
1.1
Designated use
The Micropilot S is a compact level transmitter designed for continuous, non-contact
level measurement of liquids, pastes and slurries. The operating frequency of
approx. 6 GHz lies in a frequency band approved for industrial use. Its low pulse power
of 1 mW (1 µ W ERP) allows safe installation in metallic and non-metallic vessels, with
no risk to humans or the environment.
1.2
Installation, commissioning and operation
The Micropilot S has been designed to operate safely in accordance with current
technical, safety and EU standards. If installed incorrectly or used for applications for
which it is not intended, however, it is possible that application-related dangers may
arise, e.g. product overflow due to incorrect installation or calibration. For this reason,
the instrument must be installed, connected, operated and maintained according to the
instructions in this manual: personnel must be authorised and suitably qualified. The
manual must have been read and understood, and the instructions followed.
Modifications and repairs to the device are permissible only when they are expressly
approved in the manual.
1.3
Operation safety
Hazardous areas
If the device is to be installed in an explosion hazardous area, then the specifications in
the certificate as well as all national and local regulations must be observed.
• Ensure that all personnel are suitably qualified.
• Observe the specifications in the certificate as well as national and local regulations.
FCC approval
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Caution!
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
Endress+Hauser
1 Safety instructions
Micropilot S FMR 531
Safety instructions
1.1
Designated use
The Micropilot S is a compact level transmitter designed for continuous, non-contact
level measurement of liquids, pastes and slurries. The operating frequency of
approx. 6 GHz lies in a frequency band approved for industrial use. Its low pulse power
of 1 mW (1 µ W ERP) allows safe installation in metallic and non-metallic vessels, with
no risk to humans or the environment.
1.2
Installation, commissioning and operation
The Micropilot S has been designed to operate safely in accordance with current
technical, safety and EU standards. If installed incorrectly or used for applications for
which it is not intended, however, it is possible that application-related dangers may
arise, e.g. product overflow due to incorrect installation or calibration. For this reason,
the instrument must be installed, connected, operated and maintained according to the
instructions in this manual: personnel must be authorised and suitably qualified. The
manual must have been read and understood, and the instructions followed.
Modifications and repairs to the device are permissible only when they are expressly
approved in the manual.
1.3
Operation safety
Hazardous areas
If the device is to be installed in an explosion hazardous area, then the specifications in
the certificate as well as all national and local regulations must be observed.
• Ensure that all personnel are suitably qualified.
• Observe the specifications in the certificate as well as national and local regulations.
FCC approval
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Caution!
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
Endress+Hauser
1 Safety instructions
Micropilot S FMR 532
Safety instructions
1.1
Designated use
The Micropilot S is a compact level transmitter designed for continuous, non-contact
level measurement of liquids, pastes and slurries. The operating frequency of
approx. 6 GHz lies in a frequency band approved for industrial use. Its low pulse power
of 1 mW (1 µ W ERP) allows safe installation in metallic and non-metallic vessels, with
no risk to humans or the environment.
1.2
Installation, commissioning and operation
The Micropilot S has been designed to operate safely in accordance with current
technical, safety and EU standards. If installed incorrectly or used for applications for
which it is not intended, however, it is possible that application-related dangers may
arise, e.g. product overflow due to incorrect installation or calibration. For this reason,
the instrument must be installed, connected, operated and maintained according to the
instructions in this manual: personnel must be authorised and suitably qualified. The
manual must have been read and understood, and the instructions followed.
Modifications and repairs to the device are permissible only when they are expressly
approved in the manual.
1.3
Operation safety
Hazardous areas
If the device is to be installed in an explosion hazardous area, then the specifications in
the certificate as well as all national and local regulations must be observed.
• Ensure that all personnel are suitably qualified.
• Observe the specifications in the certificate as well as national and local regulations.
FCC approval
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Caution!
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
Endress+Hauser
1 Safety instructions
Micropilot S FMR 533
Safety instructions
1.1
Designated use
The Micropilot S is a compact level transmitter designed for continuous, non-contact
level measurement of liquids, pastes and slurries. The operating frequency of
approx. 6 GHz lies in a frequency band approved for industrial use. Its low pulse power
of 1 mW (1 µ W ERP) allows safe installation in metallic and non-metallic vessels, with
no risk to humans or the environment.
1.2
Installation, commissioning and operation
The Micropilot S has been designed to operate safely in accordance with current
technical, safety and EU standards. If installed incorrectly or used for applications for
which it is not intended, however, it is possible that application-related dangers may
arise, e.g. product overflow due to incorrect installation or calibration. For this reason,
the instrument must be installed, connected, operated and maintained according to the
instructions in this manual: personnel must be authorised and suitably qualified. The
manual must have been read and understood, and the instructions followed.
Modifications and repairs to the device are permissible only when they are expressly
approved in the manual.
1.3
Operation safety
Hazardous areas
If the device is to be installed in an explosion hazardous area, then the specifications in
the certificate as well as all national and local regulations must be observed.
• Ensure that all personnel are suitably qualified.
• Observe the specifications in the certificate as well as national and local regulations.
FCC approval
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Caution!
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
Endress+Hauser

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2000:08:11 20:30:44+02:00
Create Date                     : 2000:08:11 20:30:01+02:00
Title                           : FMR53x_Deckbl_FCC.PDF
Subject                         : 
Author                          : Steinebrunner-E
Creator                         : Microsoft Word - FMR53x_Deckbl_FCC.doc
Producer                        : Acrobat PDFWriter 3.02 für Windows NT
Page Count                      : 4

EXIF Metadata provided by EXIF.tools