Energy Technology Laboratories CDT909MF Wireless Remote Control User Manual X34CDT909MF UserMan
Energy Technology Laboratories Wireless Remote Control X34CDT909MF UserMan
User Manual
Wireless remote control User Manual 1. Set the user password 1) Using the remote control enter the initial password, enter the password when you press a button for each of its green LED flashes once said that the effective input state. 2) Long press "1 / 2" button 3 seconds until the green long-on, indicate the password to enter the correct change password state, under the red light flashes 3 times that password is invalid and can not change your password. 3) Enter the new password, click "#/*" key to confirm the green light flashes 3 times, indicate password change successful. 4) Re-enter new password, press "#/*" key to confirm, enter the green light flashes 3 times, after the correct password to complete changes 2. Open the door 1) enter your password by press button of remote control 2) "#/*" Button and then click launch, the red indicator light 1 second that was successfully launched. The receiver receiving the signal sent two "beep" sound, while PRC-ray tube so that the door automatically open 3. Wrong password 1) If user enters the wrong password, the red light in the remote control will flash 3 times. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2010:01:08 16:10+08:00 Create Date : 2010:01:08 16:10+08:00 Format : application/pdf Title : Microsoft Word - X34CDT909MF_UserMan.doc Creator : Administrator Document ID : uuid:a281981f-87ae-4bb6-8e31-678a0a21f172 Instance ID : uuid:3eaf3e75-e40d-49aa-a5d5-92b918e583df Page Count : 2 Author : AdministratorEXIF Metadata provided by EXIF.tools