Enterprise Networks 18-3800 Fast Ethernet Wireless Router User Manual enet100 manual

Download:
Mirror Download [FCC.gov]
Document ID	180366
Application ID	MAEyu9YSnVJVeo6CxllbRw==
Document Description	enet100 manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	3.32kB (41473 bits)
Date Submitted	2001-11-20 00:00:00
Date Available	2002-06-07 00:00:00
Creation Date	2001-11-20 13:52:09
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-11-20 13:52:10
Document Title	enet100 manual

Enet100 user’s manual
Features:
Full 100M bps Fast Ethernet Wire Speed
HTTP Web Server for Browser Graphical Interface
Static Routing Capability Standard
Complete Level III Routing Capability Available
Applications: Wireless Data Service Providers (ISPs)
Wireless Local Loop / “Last-M ile” Connection
LAN / M AN Interconnection
Hospital, University, Industrial Campus Inter-networking
Point-to-Point Connectivity
Consecutive Point-to-Point (self-healing ring)
Introduction:
Enterprise Networks’ Enet100 wireless router is designed for wireless interconnection of Fast Ethernet
networks over distances in excess of four miles. Operating in the unlicensed 24 GHz band, the enet100
system offers same day plug and play capability.
The Enet100 is ideal for point-to-point (PTP), consecutive PTP or mesh architecture and point-tomultipoint (PMP) applications. With sophisticated level III routing capabilities, the enet100 can drop, pass
or rename traffic as desired. Additionally, the Enet100 wireless router will only pass traffic to designated
wireless receiver(s) for security and resistance to intyerference.
Enterprise Networks, Inc.
tel: 215.699.6882
web: enet100.com
Enet100 User’s Manual
System Overview:
Each enet100 transceiver is configured as a node on your wireless network. In the most basic
configuration, two enet100 wireless routers can be connected as a point-to-point link. More nodes can
be added to form a CPTP or ring network that greatly increases greater reliability with self-healing
capability. Should one of the links on the ring fail, traffic can be routed the other direction with loss of
service. For even greater reliability, points on the CPTP network ring can be interconnected in a mesh
configuration. Not only does the mesh configuration increase reliability to tolerate more than one link
failure, traffic can be dynamically re-routed over the least congested path.
Each wireless router or wireless network node has two main components; an indoor Digital Processing
Unit (DPU) and an outdoor Microwave Processing Unit (MPU).
The DPU has a single Fast Ethernet connectoin that connects your wireless router to the outside world.
Through the RJ-45 connector, the system is configure initially as well monitored and maintained while
in operation. As Fast Ethernet data from your network is received by the Enet100 router, the DPU buffers
it, adds Reed-Solomon forward error correction (FEC) and modulates the data onto an RF carrier using
quadrature-amplitude modulation (QAM). The system uses modulation rates up to 128QAM with
concatenated Reed-Solomon FEC for excellent bandwidth efficiency and data integrity.
Initial setup of the DPU for each specific application is performed with local computer and null Ethernet
cable. This can be done on site or prior at another location. The Enet100 is menu-driven and offers
virtually “plug-and-play” capabiliuty. After setting up the IP address, and aligning the antennas, the
system is up and running. All access to the enet100 wireless router is via a standard web browser
(Explorer, Netscape, etc.) as the GIU interface. Aside from the basic setup parameters, myriad other
functions can be controlled such as QAM rate, baud rate, data payload, Reed-Solomon overhead, IP
address and static IP routing tables to name a few. Optional routing protocols such as RIP1-2, OSPF,
and BGP/EGP are available for additional router functionality.
After initial setup, and the unit is in service, administrators with the proper authority can access router,
view performance parameters, upgrade software and make setup changes via the local network or
through the Internet using the DPU’s unique IP address. All software upgrades are free to Enet100
users and can be downloaded from the enet100.com website and sent directly to the DPU from a remote
location.
High water marks can be set as alarms on a number of parameters. As examples, if payload falls below
a specified point, the DPU can be programmed to route data through another path, or if BER exceeds
a predetermined threshold, a technician is paged.
A single coaxial cable carries the transmitted signal, received signal and power between the indoor DPU
and outdoor MPU. The transmit section of the MPU uses a very low-noise processor to upconvert the
RF signal from the DPU to the desired microwave frequency. After upconversion the signal is filtered and
amplified for transmission. The receive portion of the MPU uses low noise amplifiers to boost the
received signal and then downconvert it to an RF frequency for the DPU. The MPU determines the final
operating frequency and is offered in a wide range of licensed and unlicensed frequency bands from
6MHz through 38GHz.
Enterprise Networks, Inc.
tel: 215.699.6882
web: enet100.com
Enet100 User’s Manual
Enterprise Networks’ products represent the next generation in wireless technology. Breakthroughs in
hardware, software and firmware have made it possible for the Enet100 line of wireless gear to offer
extremely high performance and reliability in an inexpensive and easy to use package.
Enterprise Networks has round-the-clock parts and technical support 365 days a year. Comprehensive
path calculations are provided free of charge that predict and guarantee link performance. Enterprise
Networks also supplies all data, documentation and forms to license paths for immediate temporary and
permanent operation.
Please call to discuss your specific application.
Enterprise Networks, Inc.
tel: 215.699.6882
web: enet100.com
Enet100 User’s Manual
Digital Processing Unit
Data Interfaces
Data Connector
Data Cable
IF Output
IF Input
IF Connector
IF/ Power Cable
AC Power In
DC Power Out
Enclosure
Temp Range
Ethernet 10/100 BaseT 802.3
RJ-45
Category 5
800-2000 MHz
800-2000 MHz
F-type
RG-6
2A @ 120 VAC
5A @ 24 VDC
19" Rack Mount, Single Slot
-10 to +40 0 C
Microwave Processing Unit
IF Input
IF Output
IF Connector
IF/ Power Cable
Microwave Output
Microwave Frequencies
Channel Bandwidth
Enclosure
DC Power
800-2000 MHz
800-2000 MHz
F-type
RG-6
WR-42 Cover Flange
17.7 - 19.6 GHz per FCC CFR 47 part 101
20MHz
6"x8"x9" Waterproof, Cast Aluminum
5A @ 24 VDC
General
Transmission Distances for 99.99% Reliability at 18GHz
Dallas
Denver
Los Angeles
Miami
New York
2' Antenna
4.3 mi.
7.8 mi.
8.3 mi.
4.0 mi.
4.8 mi.
4' Antenna
6.3 mi.
13 mi.
14 mi.
5.8 mi.
6.8 mi.
6' Antenna
7.8 mi.
17 mi.
19 mi.
7.1 mi.
8.3 mi.
8' Antenna
8.8 mi.
22 mi.
24 mi.
8.2 mi.
10 mi.
This device has not yet been authorized as required by the rules of the Federal Communications Commission.
This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained.
Enterprise Networks, Inc.
P.O. Box 1008
North Wales, PA 19454
TEL: 215/699-6882
FAX: 215/699-6883
www.enet100.com
Enterprise Networks, Inc.
tel: 215.699.6882
web: enet100.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:11:20 13:52:09
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:11:20 13:52:10-05:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools