Entone Technologies 50-0100-QT-44 High Definition IP TV receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3005794
Application ID	IM7wHnezuf/Hc7rsMR6jtA==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.02kB (1662712 bits)
Date Submitted	2016-05-26 00:00:00
Date Available	2016-05-26 00:00:00
Creation Date	2016-03-28 11:29:16
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Document Lastmod	2016-05-19 15:26:34
Document Title	User Manual.pdf
Document Creator	Adobe InDesign CS5.5 (7.5)

Kamai 6
Media Receiver
Quick Start Guide
製作要求：A5(148*210+/-1mm), 120g書紙，四色印刷
過啞油，釘裝
製作：袁龙
審核：唐雄
核準：蒋祖鸿
注：此框及內容不用印刷
COPYRIGHT
©2015 Entone, Inc. All rights reserved. This document contains proprietary information protected by
copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written consent of Entone, Inc., 20863 Stevens Creek Blvd, Suite 300, Cupertino, CA 95014, U.S.A.
DISCLAIMER
IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES
OR OTHER REMEDIES.
TRADEMARKS
Entone and the tagline “Connecting the Home” are trademarks of Entone, Inc. All other trademarks or
registered trademarks belong to their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
CHANGES
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Entone, Inc.
assumes no liability resulting from the use of the information contained herein. Entone, Inc. reserves the
right to make changes in the product design without reservation and without notification to its users.
P/N: 99-708804-06 - V0.2
Overview
Safety Instructions
What’s Included
Front Panel
7	Rear Panel
Connecting Video
High-Definition TVs
Standard-Definition TVs
Connecting Audio
10
Stereo
11
Surround Sound
Connecting Network
12	Ethernet
Powering Up
13
Setting up Remote Control
13	Using IR Extender Receiver
14	Connecting to Power Source
15	Declaration of Conformity
Kamai Media Receiver
料號：25001-B6237 版本：B-1
描述:PAPER MANUAL IPN25-7251S-wifi client_US
ECN: LHE-16-XXXX
日期：2016.03.09
Quick Start Guide
Table of Contents
important Safety instructions (continued)
•
•
•
Quick Start Guide
•
•
•
•
•
•
•
•
•
•
•
•
•
WarNiNG: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
read these instructions.
keep these instructions.
Heed all warnings.
Follow all instructions.
do not use this apparatus near water.
clean only with dry cloth.
do not block any ventilation openings. install in accordance with the manufacturer’s instructions.
do not defeat the safety purpose of the polarized or grounding-type plug. a
polarized plug has two blades with one wider than the other. a grounding
type plug has two blades and a third grounding prong. the wide blade or the
third prongs are provided for your safety. if the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
only use attachments/accessories specified by the manufacturer.
unplug this apparatus during lightning storms or when unused for long periods of time.
refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
to reduce the risk of electric shock, do Not remove cover or back panel. No
user serviceable parts inside. refer servicing to qualified personnel.
•
•
•
•
•
•
•
•
•
•
•
•
to help prevent electric shock, plug the power cable into properly grounded
sources. use only properly grounded extension cords and adaptors, if they are
needed.
the ac main plug is used as the disconnect device, the disconnect device shall
remain readily operable.
make sure nothing is lying on any of the cables.
Be sure the cables are located where they will not be stepped on or tripped
over.
do not spill food or liquids onto the unit.
do not push any objects into the free slots. doing so will damage the unit, can
cause fire or electrical shock, and can short out interior components.
do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
do not block cooling vents.
do not place the equipment in a closed-in wall unit.
When you disconnect a cable, pull on its connector or on its strain relief loop,
not on the cable itself. Some cables have a connector with locking tabs; if
you are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cables.
When you connect a cable, make sure both connectors are correctly oriented
and aligned before connecting to avoid bending connector pins.
For PLuGGaBLe eQuiPmeNt, the socket-outlet should be installed near the
equipment for easy access.
changes or modifications not expressly approved by the party responsible
could void the user’s authority to operate this device.
Quick Start Guide
important Safety instructions
operating information
aGora Home Server
aGora Home Server
operating temperature: 0 °c (32 °F) to 35 °c (95 °F)
What’s Included
Quick Start Guide
Kamai Media Receiver
DIN-to-RCA Cable
Quick Start Guide
IR Extender Receiver (Optional)
Ethernet Cable (Optional)
HDMI Cable (Optional)
IR Remote Control*
2 Batteries for
Remote Control
Additional items that may be required (not included):
• Ethernet Cable
• HDMI Cable
• Digital Audio Cable
• Network Router
Remote Control Guide*
Kamai Media Receiver
Kamai Media Receiver
AC Power Adapter
*The Remote Control may vary and is dependent on your service provider.
Kamai Quick Start Guide
Kamai — Front Panel
Kamai — Rear Panel
Quick Start Guide
Quick Start Guide
Name
Description
Name
Description
Network LED
Solid green indicates network is connected
A/V OUT
9-Pin DIN conector for connecting to video output using DIN-to-RCA cable
Power LED
Solid blue indicates the unit is on
Solid red indicates the unit is in standby mode
Flashing blue indicates the unit is starting up
HDMI
Digital video and audio port for connecting to a highdefinition TV (HDTV)
Digital Audio
S/PDIF digital optical audio TOSLINK output
Reset
Reset the device factory settings with a thin metal
probe
IR Extender Jack
To connect IR Extender Receiver
USB
To connect USB 3.0 devices such as USB Flash Drive
and External Hard Drive
(max 900mA load)
Ethernet
Plug for wired network connection
Power
DC power jack (100-240V, Output 12V/2A)
Kamai Media Receiver
Kamai Media Receiver
Availability of certain features is dependent on your service provider.
Availability of certain features is dependent on your service provider.
Option 2: Composite Video
Kamai provides two video options for connecting to your TV:
HDMI and Composite Video.
Select a video option then proceed to Step 2.
Use the DIN-to-RCA cable provided Composite Video
Delivers good picture quality
and connect the yellow cable to the
yellow VIDEO IN port on your TV.
Then proceed to the next step (“Connecting Audio”) to connect the red/white cables.
Make sure your TV is turned on and the correct video input is
selected.
Option 1: HDMI (Recommended)
If you have already selected HDMI or Component Video as
your video connection, then do not use this cable.
Quick Start Guide
Quick Start Guide
Step 1: Connecting Video
If your TV has an HDMI connection,
Delivers the best video & audio
use an HDMI cable (may not be
quality via a single cable
included) and connect Kamai to the
HDMI IN port on your TV. This connection provides both video
and audio so you do not need a separate audio connection.
Proceed to “Connecting Network on page 12.
Cable is optional and
may not be included
S-videO
Kamai Media Receiver
Kamai Media Receiver
S-videO
Cable included
Option 2: Surround Sound
Kamai has two audio options: Stereo or Surround Sound. Select an audio option and proceed accordingly.
If your TV is connected to an A/V Receiver that supports Dolby
Digital 5.1 Surround Sound, use a digital audio cable (sold
separately) to connect Kamai to the OPTICAL AUDIO IN port
on your A/V Receiver.
NOTE: If you have already selected HDMI as your video connection, then skip this audio section and proceed to “Connecting Network” on page 12.
Option 1: Stereo
Quick Start Guide
Quick Start Guide
Step 2: Connecting Audio
Use the DIN-toRCAx6 cable provided and connect the 3.5mm
jack to the Kamai A/V Out port and the red and white cables to
the AUDIO IN port on your TV.
Kamai Media Receiver
10
S-videO
Cable not included
Kamai Media Receiver
Cable included
11
Step 4: Powering Up
Select from one of the following networking options.
Setting Up Remote Control
Option #1
Connect to a Wireless Network via a Wireless Network Router
or Access Point
Note: Internal Wi-Fi is an optional feature for Kamai. Please
contact your service provider for the availability and detailed
instructions on the wireless network conguration.
1. Open the battery cover by pressing down on the battery
cover latch and sliding it off.
2. Insert the batteries, matching the “+” and “-” marks on the
batteries with the interior of the remote control.
3. Snap on the battery cover to close.
Option #2
Connect an Ethernet cable (sold separately) from Kamai to a
cable/DSL modem or Network Router.
Quick Start Guide
Quick Start Guide
Step 3: Connecting Network
Note: Refer to the Remote Control Guide for more details
about other remote control features.
Using IR Extender Receiver
The remote control uses InfraRed (IR) light signals to control
the Kamai. IR signals cannot go through walls or other solid
objects. If the line of sight of your Kamai is blocked, then you
can use the IR Extender Receiver provided to extend the reach
of IR signals from the remote control.
Kamai Media Receiver
12
Router not included
Kamai Media Receiver
Cable is optional and
may not be included
13
Quick Start Guide
1. Connect the power cord to the POWER port on the back of
the Kamai.
2. Plug the AC power adapter to a power outlet.
3. Follow the on-screen instructions.
NOTE: Make sure your TV is turned on and the correct video
input is selected.
Declaration of Conformity
To ensure proper use of this product, please read this manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location.
WARNING: This symbol indicates the presence of uninsulated dangerous voltage within the
product’s enclosure that constitutes a risk of electric shock. Do not open the product’s case.
CAUTION: This symbol indicates you must take care; there is risk of damage to the equipment or to yourself.
Declaration of Conformity (Europe Only)
This product is in conformity with the Council Directives:
     • EMC Directive 2004/108/EC
     • Low voltage Directive 2006/95/EC
Quick Start Guide
Connecting to Power Source
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit
accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Kamai Media Receiver
Kamai Media Receiver
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour
un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
14
15
Notes
Declaration of Conformity (Continued)
QUICK START GUIDE
Declaration of Conformity (United States Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the Federal Communication Commission (FCC) Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment OFF
and ON, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to a
circuit from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: A
ble for compliance could void the user’s authority to operate this equipment.
QUICK START GUIDE
To reduce
the risk of electric shock, DO NOT remove the cover or back. No user serviceable parts are
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
KAMAI MEDIA RECEIVER
KAMAI MEDIA RECEIVER
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
16
17
©2015 Entone, Inc. Entone, Kamai and connecting the home are trademarks of Entone, Inc. Other company, product, and service names
may be trademarks or service marks of others. All information contained in this document is subject to change without notice. Information
contained in this document is provided on an as is basis. In no event will Entone be liable for damages arising directly or indirectly from any
use of the information contained in this document. Subject to change without notice.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2016:03:28 11:29:16+08:00
Metadata Date                   : 2016:05:19 15:26:34+08:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Modify Date                     : 2016:05:19 15:26:34+08:00
Format                          : application/pdf
Document ID                     : uuid:cdbe6f82-d980-49c5-949e-310af58915f2
Instance ID                     : uuid:56a0b23b-fb85-4094-9106-581f2b1561ef
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Trapped                         : False
Has XFA                         : No
Page Count                      : 11
Creator                         : Adobe InDesign CS5.5 (7.5)

EXIF Metadata provided by EXIF.tools