EpiCom SER-8189 CDMA 1x EV-DO USB Modem with WLAN User Manual SER 8189
EpiCom Co., Ltd. CDMA 1x EV-DO USB Modem with WLAN SER 8189
EpiCom >
Manual
EPIVALLEY SER-8189 QSG Table of Contents Care and Maintenance‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 2 Part 1. Getting to know the SER‐8189 1.1 Package Contents ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 1.2 Consists of SER‐8189. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 Part 2. Setting up the SER‐8189 2.1 Charging the battery‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 2.2 Battery Tips ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 4 2.3 Extending Battery Life‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 4 2.4 Using a LAN cable‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5 Part 3. Using the SER‐8189 3.1 Connecting the SER‐8189‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5. 3.2 Opening the Browser Interface ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 6 3.3 Device Activation (Winodws)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 6 3.4 Device Activation (Mac)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 7 Thank you for purchasing EpiValley SER-8189. Part 4. Technical Specifications, Regulatory and Safety ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 8 Note. 4.1 LED Overview ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 8 - This manual briefly the preparation, the process for installing and safety 4.2 Technical Specification‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 9 precautions for using SER-8189 router. 4.3 Safe Information ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 9 - You are recommended to read the manual before using the SER-8189. 4.4. Trademarks ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 10 4.5 Copyright‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 10 1.1 Package Contents Care and Maintenance - EpiValley SER-8189 Mobile Hotspot Router It is normal that your wireless device gets hot when you use it. - QSG (Quick Start Guide) - Use your wireless device and accessories with care and in clean - AC-DC Travel Adaptor environment. - Carrying Pouch - Keep the wireless device from a fire or a lit cigarette. - Li-ion 1,350mAh battery - Protect your device and accessories from water and vapor and keep them - RJ45 slot rubber cover dry. - Do not drop, throw or bend your device. 1.2 Consists of SER-8189 - Clean your device with a piece of damp and soft antistatic cloth. - Do not use any chemical agents (such as alcohol and benzene), chemical detergent, or powder to clean it. RJ45 LAN Port - Do not leave your device and accessories in a place with a considerably low or high temperature. - Use only accessories of the wireless device approved by the manufacturer. - Contact the authorized service center for any abnormity of the device or Micro USB port accessories. - Do not dismantle the device or accessories. Otherwise, the device and accessories are not covered by the warranty. Part 1. Getting to know the SER-8189 Power/Reset Button Air holes Slide open the battery compartment door by firmly pressing in the direction of the arrows. 2. Insert the battery by lining up the gold contact points on the battery with the gold contact points in the battery compartment. Then press down gently until the battery is seated. Part 2. Setting up the SER-8189 2.1 Charging the battery 1. The battery compartment is located on the bottom of the device. 3. Replace the battery cover and slide it closed while pressing gently until it locks into place. 4. Connect the micro USB end of the AC-DC adapter to the micro USB port Warning of the device. Use only EpiValley approved or EpiValley Wireless approved batteries and chargers with your device. The failure to use a EpiValley approved or EpiValley Wireless-approved battery and charger may increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage. Battery life depends on the network, signal strength, temperature, features, and accessories you use. _ If you connect your device to your computer using a USB data cable, the battery will charge. However, the device will not function as a wireless access Note point while connected to your computer. • You must have a fully charged battery the first time you use the SER-8189. _ It normally takes at least 3 hours to fully charge the battery with an AC• After the first use, you may use the device while it is connected to the AC- DC adapter. DC adapter. _ New batteries or batteries stored for a long time may take more time to • When using battery power, the device lasts up to 2.5 hours (when charge. connected to a single device only). _ When charging your battery, keep it near room temperature. • The battery will discharge more rapidly as additional devices access the _ Never expose batteries to temperatures below 32°F SER-8189. (0°C) or above 113°F (45°C). Never leave the device in an unattended vehicle due to uncontrollable temperatures that may be outside 2.2 Battery Tips the desired temperature for this device. _ It is normal for batteries to gradually wear down and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery. 2.3 Extending Battery Life When you are not using the device, push the power button lightly. Then the WiFi LED indicator turns off and SER-8189 turns to Standby mode. If you want to connect WiFi network again, push the power button lightly again. A blue WiFi LED of indicates that SER-8189 is ready to connect. 2.4 Using a LAN cable (RJ45) Part 3. Using the SER-8189 If you want to connect to RJ45 LAN cable to the SER-8189, plug the cable 3.1 Connecting the SER-8189 to the RJ45 slot located between Micro USB port and power button. When you press the power button: _ The SER-8189 comes on and the power LED lights up. _ A solid green power LED of indicates that the device is charged over 40%. 1. Turn on the SER-8189 ensure your WiFi is enabled on your PC or laptop. You can view your available wireless networks by going through the control panel, network connections or system tray (lower right hand corner of your screen). 2. Select “EPIVALLEY_SER-8189 XXXX” as your wireless network. Note. The last 4 digits, ‘XXXX’ of the SSID is the endemic numbers or combination of numbers and letters. You can find this unique SSID of your SER‐8189 on the label attached in the back side of the SER‐8189. 3. Click Connect 4. Open your computer web browser and enter http://10.10.10.254 into the address window and press the Enter key. 3.2 Opening the Browser Interface 1. Open your Web browser and enter http://10.10.10.254/ into the address Type the administrative ID and password into the Login box and click ok. window. 3. The Browser Interface screen will open. 2. Click Login button on the right top of the browser. The below pop up message will open to require administrative ID & Password. The default ID and Password is admin/admin. 3.3 Device Activation (Windows) If your device has not been activated at time of purchase, you must activate now. (그림1) Before you activate, you need SPC, MDN and MIN from the Carrier providing ¾ 2nd step is to input MDN and MIN. the service. Click Login button. Then, you will see the pop up screen requiring Manual Activation. Activation process consists of 2 steps. ¾ 1st step is to input SPC. Input six ‘000000’ for SPC (the SPC can be unique to the Carrier, confirm with your own Carrier before attempting to Input the 10 digit MDN (Mobile Directory Number) and MIN (Mobile activate) and click Apply. Identification Number) then click Apply. The MDN and MIN are provided by your carrier. Please contact your carrier for the correct MDN and MIN. If the Activation Code is incorrect, you will be asked to try again. If the Activation Code is correct, proceed to the 2nd step. 3.4 Device Activation (Mac) 1. Go to Airport Icon at the right upper corner of desktop tap menu and click it, Airport on Airport off And make it turn on to search the Wi-Fi networks around your place. Put the cursor on Airport Icon and turn the Airport on as below. EpiValley_SER8189 (그림4) Part 4. Technical Specifications, Regulatory and Safety Information 2. Choose “Open Network Preferences” on the drop-down menu and select “EPIVALLEY_SER8189” of your Wi-Fi network and apply it. 4.1 LED Overview Your device has Power/Wi-Fi/LAN/CDMA LEDs which provide status information about the device and network. LED Color Indicates No Light Power - Power on No power Blinking Battery level under 5% Solid Battery level under 20% Orange Solid Battery level under 40% Green Solid Battery level over 40% Orange Solid In charging Operating temperature Fully charged Humidity No battery but connected to Storage Temperature Red Power - Power off Green Solid AC-DC adapter Wi-Fi LAN No Light Blue CDMA Radio Off Solid No Light Blue Red 4. Memory Green Solid RF Band Data Rate Operating time Flash : 4M Bytes / SDRAM : 16M Bytes CDMA 800/1900MHz Dual Band Support Wi-Fi 2.4GHz Band Support CDMA : 3.1Mbps downlink / 1.8Mbps uplink Wi-Fi : 54Mbps 0°C to 45°C 5 ~ 95% -25°C to 45°C Running time : 2.5Hrs (When fully charged) Standby time : 7.5Hrs Radio on LED indicators Power / Wi-Fi / LAN / CDMA Not connected Battery and charging Li-ion 1,350mAh, 3.7V, Rechargeable Connected Power AC-DC Power Adaptor 5V/2A Solid Not connected Blinking Activity 4.3 Safety Information Solid Connected Body Worn Operation Important safety information regarding radiofrequency radiation (RF) exposure. 4.2 Technical Specification To ensure compliance with RF exposure guidelines the device must be used with a minimum of 20cm separation from the body. Size (W,D,H) 90mm x 50mm x 15mm (3.54 x 1.97 x 0.59 inch) Failure to observe these instructions could result in your RF exposure Weight About 70g (2.47 oz) exceeding the relevant guideline limits. WARNING: This equipment may generate or use radio frequency Regulatory Information (FCC Statement) energy. Changes or modifications to this equipment may cause harmful FCC Equipment Authorization ID: R2NSER-8189 interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this This device complies with Part 15 of the FCC Rules. Operation is subject to equipment if an unauthorized change or modification is made. the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. * This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body when using it via USB cable. 4.4 Trademarks EpiValley and the logo are trademarks of EpiValley. EpiValley Co., Ltd, SER-8189, and the EpiValley Co., Ltd logo are trademarks of EpiValley Co., Ltd. Windows is a registered trademark of Microsoft Corporation. 4.5 Copyright ⓒ2010 EpiValley. EpiValley and the logo are trademarks of EpiValley. Other marks are the property of their respective owners. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ tv technician for help. 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2010:02:27 10:58:13+09:00 Create Date : 2010:02:27 10:58:13+09:00 Format : application/pdf Title : Microsoft Word - SER-8189-User Manual.doc Creator : NYSEO Document ID : uuid:74fed7c1-e513-49aa-a35c-030b37bc385c Instance ID : uuid:21a83903-38cf-4c76-b2e8-8b27e8552187 Page Count : 10 Author : NYSEOEXIF Metadata provided by EXIF.tools