Epson Actionnote 4Slc 33 Users Manual 4SLC/33 User

2015-03-28

• FRONT MATTER
• CONTENTS
• INTRODUCTION
  • Standard Configuration
  • Optional Equipment
  • Where to Get Help
  • How to Use this Manual
    • Conventions Used in This Manual
• CHAP 1-SETTING UP THE COMPUTER
  • Unpacking the Computer
  • Identifying the System Parts
    • Front View
    • Rear Panel and Left Side
  • Connecting the AC Adapter
  • Opening the Screen
  • Turning On the Computer
• CHAP 2-USING YOUR COMPUTER
  • Taking Care of the Computer
  • Copying the Reference Diskette Utilities
  • Using the Password Function
    • Typing the Password
  • Using the Keyboard
    • Special Keys
    • Using F11 and F12
    • Using the Embedded Numeric Keypad
  • Stopping a Command or Program
  • Resetting the Computer
  • Turning 0ff the Computer
  • Changing the CPU Speed
  • Using the LCD Screen
  • Using Diskettes
    • Inserting and Removing Diskettes
    • Write-protecting Diskettes
    • Making Backup Copies
    • Using a Single Diskette Drive System
  • Using a Hard Disk
    • Backing Up the Hard Disk
    • Saving Battery Power
  • Using Memory
• CHAP 3-POWERING UP THE COMPUTER
  • Using the AC Adapter
  • Using the Battery Pack
    • Replacing the Battery Pack
  • Recharging the Battery
    • Low Battery Indicator
  • Using the Suspend/Resume Switch
  • Using Setup to Conserve Battery Power
• CHAP 4-CONNECTING OPTIONAL DEVICES
  • Connecting an External Monitor
  • Connecting a Parallel Printer
  • Connecting a Serial Device
    • Checking the Serial Port Settings
  • Using the EXT KB Port
    • Connecting the Trackball
    • Connecting Any Other Pointing Device
    • Connecting an External Keyboard
  • Connecting the Internal Fax/Modem
  • Adding Memory Modules or a Numeric Coprocessor
    • Removing the Keyboard
    • Installing a Memory Module
    • Installing a Numeric Coprocessor
    • Replacing the Keyboard
• CHAP 5-RUNNING SETUP
  • Starting the Setup Program
    • Changing the Settings
    • Automatically Configuring Your System
    • Saving Your Selections
  • Changing the Standard CMOS Setup
  • Changing the Advanced CMOS Setup
  • Changing the Advanced Chipset Setup
  • Changing the Password
  • Hard Disk Utility
    • Hard Disk Format
    • Auto Interleave
    • Media Analysis
• CHAP 6-RUNNING SYSTEM DIAGNOSTICS
  • Starting the Program
    • Deleting Tests
    • Adding Tests
  • Running Tests
    • Resuming From an Error
  • System Diagnostic Tests
  • Error Messages
• CHAP 7-USING THE VGA UTILITIES
  • Lotus 1-2-3, Version 2.x
  • Microsoft Windows, Version 3.0
  • WordPerfect, Version 5.1
  • Using the VGACONF Utility Program
    • Using VGACONF From the Command Line
• APPENDIX A-TROUBLESHOOTING
  • Identifying Your System
  • Error Messages
  • The Computer Won’t Start
  • Battery Problems
  • AC Adapter Problems
  • The LCD Screen Is Blank
  • The External Monitor Screen is Blank
  • The Computer Locks Up
  • Password Problems
  • Diskette Problems
  • Diskette Drive Problems
  • Hard Disk Problems
  • Software Problems
  • Printer Problems
  • Memory Module Problems
  • Numeric Coprocessor Problems
  • CMOS Battery Problems
• APPENDIX B-FAX/MODEM COMMAND SET
  • When to Issue Commands
  • AT Command Summary
    • Dial Modifiers
  • MNP Command Summary
  • AT Register Summary
    • Option Registers
  • MNP Register Summary
  • Result Code Summary
• APPENDIX C-SPECIFICATIONS
  • Main Unit
  • Controllers
  • Keyboard
  • MassStorage
  • LCD Display
  • Power Supply
  • Physical Dimensions
  • Environmental Requirements
  • Power Source Requirements
• GLOSSARY
• INDEX