Epson Powerlite 600P Multimedia Projector Quick Start Manual 820p/811p/600p

If not then pl600pqs Manual: ://files.supporton.com/pdf/pl600p/pl600pqs

811p to the manual 34c7228c-7bd5-4d09-b2b2-6ae185a00ad6

2015-03-28

: Epson Epson-Powerlite-600P-Multimedia-Projector-Quick-Start-Manual-667064 epson-powerlite-600p-multimedia-projector-quick-start-manual-667064 epson pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadEpson Epson-Powerlite-600P-Multimedia-Projector-Quick-Start-Manual- PowerLite 820p/811p/600p - Quick Start  Epson-powerlite-600p-multimedia-projector-quick-start-manual
Open PDF In BrowserView PDF
EPSON PowerLite 600p/811p/820p
®

®

Quick Setup
TART

HERE

Connect the projector
to your laptop

For most setups, you’ll need just these two cables:

power cord

computer cable

1 Make sure your projector and laptop are turned off.
one end of the computer cable to the
2 Connect
Computer/Component Video port on the projector.

Follow these instructions to connect the projector
to your laptop. To connect other devices, such as
a VCR or desktop PC, see your User’s Guide.
the other end to your laptop’s video
3 Connect
or
monitor port.

Plug in your projector
Connect the power cord to your projector and plug the other end into a grounded outlet.

Turn on your equipment
1
on the projector first. To do so, press the red Power button.
2 Turn
The
power light flashes green as the projector warms up,
Remove the lens cover.

and the projection lamp comes on in about 30 seconds.

power light

power button

Turn on or restart your laptop. (Windows only: If you see a
3 New
Hardware Wizard screen for a Plug and Play monitor, click Cancel.)
®

Caution: Before unplugging the projector...
Press the red Power button twice, then let the projector cool while the
power
light flashes orange (about a minute and a half). Once the light stops flashing
and stays on, it’s safe to unplug the projector.
Never unplug the projector when the

power light is green or flashing orange.

Turn over

S

Quick Setup
EPSON PowerLite 600p/811p/820p

Adjust the image
1

the image as needed. To do this, press the foot release
3 Raise
button and lift the front of the projector. Once the image is

Rotate the focus ring to sharpen the image.

zoom ring

positioned where you want it, release the button to lock the
foot in position. If you need to straighten the image, rotate
the round adjustable foot at the back of the projector.

focus ring

back
adjustable
foot

Note: If you see a blank screen

see the box below.

after focusing,
No signal

the zoom ring to reduce or enlarge the image.
2 Rotate
(You can also move the projector closer to or farther
from the screen.)

your image looks like
or
, press the Sync+ or Sync–
4 If(vertical
Keystone) button to correct the shape of the image.
image looks like
or
, you’ve placed the projector
5 Ifatyour
an angle to the screen. Move it directly in front of the center
of the screen, facing the screen squarely. Or press the Tracking+
or Tracking– (horizontal Keystone) button to correct the shape.

If you see a blank screen
®

If you’re using Macintosh OS 9.x:

If you see a blank screen or the No Signal message
after turning on your laptop, check the following:

 Make sure the

power light is green and
not flashing and the lens cover is off.

1. From the Apple menu, select Control Panels, then click Monitors
or Monitors and Sound.

®

No signal

 Try turning off the laptop and restarting it.

2. Click the Arrange icon.
click here

 If you’ve connected more than one computer and/or video source,
you may need to press the Computer/YCbCr or Video button on top
of the projector. (Allow a few seconds for the projector to sync up
after pressing it.)

drag one monitor icon
on top of the other

 Make sure your cable is connected securely.

If you’re using a Windows laptop:
 Press the function key that lets you display on an external monitor.

3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.

It may have an icon such as
, or it may be labelled CRT/LCD.
You may have to hold down the Fn (function) key while pressing it.
(Allow a few seconds for the projector to sync up after pressing it.)
Check your laptop’s manual or online help for details.

If this option isn’t available, you may need to select one of the
Simulscan resolution settings:

On most systems, the
or CRT/LCD key lets you toggle between
the LCD screen and the projector, or display on both at the
same time.

2. Click the Monitor icon.

1. Perform step 1 above, if necessary.

click here

 You might need to use the Display utility in the Control Panel

select a Simulscan
resolution

to enable both the LCD screen and external monitor port.

3. Select a Simulscan resolution as shown. (Allow a few seconds for
the projector to sync up after making the selection.)
If you’re using Macintosh OS X, see “Solving Problems” in
your User’s Guide.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc.
Copyright © 2002 by Epson America, Inc. Printed in Japan. 5/02

CPD-13952R1



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Producer                        : Acrobat Distiller 4.0 for Macintosh
Create Date                     : 2002:05:10 10:05:15
Title                           : PowerLite 820p/811p/600p - Quick Start
Subject                         : This document contains quick setup instructions for this product.
Modify Date                     : 2007:02:26 08:35:02-08:00
Page Count                      : 2
Page Layout                     : SinglePage
EXIF Metadata provided by EXIF.tools

Navigation menu