Epson Start Here WF 2750/WF 2760 Manual Cpd51340

User Manual: Epson Manual Epson WorkForce WF-2760 Installation Guide | Manual Device

Open the PDF directly: View PDF .
Page Count: 4

Start Here

2 Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

LT R

3 Insert paper with the glossy or printable side down.

Note: Make sure the paper is loaded against the front edge guide

and not sticking out from the end of the cassette.

4 Slide the side edge guides against the paper, but not too

tightly.

5 Keep the cassette fl at as you insert it all the way.

6 Pull out the output tray and its extensions.

7 Select the paper settings on the product’s control panel.

For more information on loading different paper types or

envelopes, see the online User’s Guide.

Read these instructions before using your product.

The illustrations show the WF-2750, but the steps are the same

for the WF-2760.

Note for Spanish speakers/Nota para hispanohablantes:

Para obtener instrucciones de confi guración en español, consulte

la Guía de instalación en www.epson.com/support/wf2750sp o

www.epson.com/support/wf2760sp (requiere una conexión a Inernet).

1 Unpack

French control panel

stickers

Note: Do not open the ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

2 Lift up the scanner unit and remove all protective materials

from inside the product.

3 Lower the scanner unit.

2 Turn on and configure

1 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

2 Turn on the product.

3 Select your language, country, date, and time.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

3 Install ink cartridges

1 Lift up the scanner unit.

Caution: Do not touch the fl at, white cable.

2 Gently shake the ink cartridges.

3 Unpack the ink cartridges.

4 Remove only the yellow tape from each ink cartridge.

Caution: Do not remove any other labels or seals, or ink will leak.

Do not touch the green chip on the cartridge.

5 Insert the cartridge in the holder for each color. Press each

cartridge down until it clicks. Make sure all cartridges are

pushed down into place.

6 Lower the scanner unit.

7 The printer starts charging the ink. Ink charging takes

approximately 4 minutes. When you see a completion

message on the printer’s LCD screen, charging is

complete.

Caution: Don’t turn off the printer or raise the scanner unit while

the printer is charging or you’ll waste ink.

Note:

• The printer is designed for use with Epson® cartridges only, not

third-party cartridges or ink.

• The cartridges included with the printer are designed for

printer setup and not for resale. After some ink is used for

charging, the rest is available for printing.

4 Load paper

1 Make sure the product is done charging the ink, and then

pull out the paper cassette.

*413163100*

*413163100*

WF-2750/WF-2760

4131631 Rev.0

1-F PMS376U

4131631 Rev.0

1-F K

Start Here

2 Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

LT R

3 Insert paper with the glossy or printable side down.

Note: Make sure the paper is loaded against the front edge guide

and not sticking out from the end of the cassette.

4 Slide the side edge guides against the paper, but not too

tightly.

5 Keep the cassette fl at as you insert it all the way.

6 Pull out the output tray and its extensions.

7 Select the paper settings on the product’s control panel.

For more information on loading different paper types or

envelopes, see the online User’s Guide.

Read these instructions before using your product.

The illustrations show the WF-2750, but the steps are the same

for the WF-2760.

Note for Spanish speakers/Nota para hispanohablantes:

Para obtener instrucciones de confi guración en español, consulte

la Guía de instalación en www.epson.com/support/wf2750sp o

www.epson.com/support/wf2760sp (requiere una conexión a Inernet).

1 Unpack

French control panel

stickers

Note: Do not open the ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

2 Lift up the scanner unit and remove all protective materials

from inside the product.

3 Lower the scanner unit.

2 Turn on and configure

1 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

2 Turn on the product.

3 Select your language, country, date, and time.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

3 Install ink cartridges

1 Lift up the scanner unit.

Caution: Do not touch the fl at, white cable.

2 Gently shake the ink cartridges.

3 Unpack the ink cartridges.

4 Remove only the yellow tape from each ink cartridge.

Caution: Do not remove any other labels or seals, or ink will leak.

Do not touch the green chip on the cartridge.

5 Insert the cartridge in the holder for each color. Press each

cartridge down until it clicks. Make sure all cartridges are

pushed down into place.

6 Lower the scanner unit.

7 The printer starts charging the ink. Ink charging takes

approximately 4 minutes. When you see a completion

message on the printer’s LCD screen, charging is

complete.

Caution: Don’t turn off the printer or raise the scanner unit while

the printer is charging or you’ll waste ink.

Note:

• The printer is designed for use with Epson® cartridges only, not

third-party cartridges or ink.

• The cartridges included with the printer are designed for

printer setup and not for resale. After some ink is used for

charging, the rest is available for printing.

4 Load paper

1 Make sure the product is done charging the ink, and then

pull out the paper cassette.

*413163100*

*413163100*

WF-2750/WF-2760

4131631 Rev.0

1-F PMS376U

4131631 Rev.0

1-F K

4 When you see the Select Your Connection screen, select

one of the following and follow the on-screen instructions:

• Wireless connection

In most cases, the software installer automatically

attempts to set up your wireless connection. If setup

is unsuccessful, you may need to enter your network

name (SSID) and password.

• Direct USB connection

Make sure you have a USB cable (not included).

• Wired network connection (WF-2760)

Make sure you have an Ethernet cable (not included).

5 When software installation is complete, restart your

computer.

Mobile printing

Connect wirelessly from your smartphone, tablet, or computer.

Print documents and photos from across the room or around

the world:

• Print directly from your iPhone, iPad, or iPod touch. Simply

connect your printer and device to the same network and

tap the action icon to print.

• Use Epson Print Enabler (free from Google Play™) with

Android™ devices (v4.4 or later). Then connect your printer

and device to the same network and tap the menu icon to

print.

• Print remotely with Epson Connect™ and Google Cloud

Print™. See your online User’s Guide for instructions or

learn more at www.epsonconnect.com.

Any problems?

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).

• Restart your router (turn it off and then on), then try to

connect to it again.

• The printer can only connect to a network that supports

2.4 GHz connections. If your router offers both 2.4 GHz and

5 GHz connections, make sure 2.4 GHz is enabled.

• If you see a firewall alert message, click Unblock or Allow

to let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. Be sure to enter your password in the correct

case.

WF-2750: Press a button on the keypad repeatedly to scroll

through characters (ABC, abc, or 123).

WF-2760: Press to enter uppercase letters or press 123#

to enter numbers or symbols.

There are lines or incorrect colors in my printouts.

Run a nozzle check to see if any of the print head nozzles are

clogged. Then clean the print head, if necessary. See the online

User’s Guide for more information.

Need paper and ink?

Try Epson specialty papers with DURABrite®

Ultra Ink for professional results. You can

purchase them at www.epson.com/ink3 (U.S.

sales) or www.epson.ca (Canadian sales). You

can also purchase supplies from an Epson

authorized reseller. Call 800-GO-EPSON

(800-463-7766).

WF-2750/WF-2760 replacement ink cartridges

Color Standard-capacity High-capacity

Black 220 220XL

Cyan 220 220XL

Magenta 220 220XL

Yellow 220 220XL

EPSON and DURABrite are registered trademarks, Epson Connect is a trademark, and

EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Designed for

Excellence is a trademark of Epson America, Inc.

Mac, OS X, iPhone, iPad, and iPod touch are trademarks of Apple Inc., registered in the U.S.

and other countries.

Android, Google Cloud Print, Chromebook, and Google Play are trademarks of Google Inc.

General Notice: Other product names used herein are for identification purposes only and may

be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

©2016 Epson America, Inc., 2/16 CPD-51340

Printed in XXXXXX

5 Connect the fax line

1 Connect a phone cord to a telephone wall jack and to the

LINE port on your product. See the online User’s Guide

for more information.

2 WF-2750: Press to set up the fax, or press to set it

up later.

WF-2760: Press Start to set up the fax, or press Close to

set it up later.

6 Install software

Note: If your computer does not have a CD/DVD drive or you

are using a Mac, an Internet connection is required to obtain the

product software. To print from a Chromebook™, go to

www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp

(Canada) for instructions.

1 Make sure the product is NOT CONNECTED to your

computer.

Windows®: If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable.

2 Insert the product CD or download and run your product’s

software package:

WF-2750:

www.epson.com/support/wf2750downloads (U.S.)

www.epson.ca/support/wf2750downloads (Canada)

WF-2760:

www.epson.com/support/wf2760downloads (U.S.)

www.epson.ca/support/wf2760downloads (Canada)

3 Follow the instructions on the screen to run the setup

program.

OS X: Make sure you install Software Updater to receive

firmware and software updates for your product.

The printer’s screen is dark.

Make sure your product is turned on, and press any button to

wake it from sleep mode.

Setup is unable to find my printer after connecting it

with a USB cable.

Make sure your product is securely connected as shown:

Any questions?

Quick Guide

Basic information and troubleshooting.

User’s Guide

Windows: Click the icon on your desktop or Apps screen to

access the online User’s Guide.

OS X: Click the icon in Applications/Epson Software/Guide

to access the online User’s Guide.

If you don’t have a User’s Guide icon, go to the Epson website,

as described below.

Technical support

www.epson.com/support (U.S.) or www.epson.ca/support

(Canada)

(562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm,

Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific

Time, Saturday. Days and hours of support are subject to

change without notice. Toll or long distance charges may apply.

Recycling

Epson offers a recycling program for end of life hardware and

ink cartridges. Please go to www.epson.com/recycle for

information on how to return your products for proper disposal.

4131631 Rev.0

1-B PMS376U

4131631 Rev.0

1-B K

4 When you see the Select Your Connection screen, select

one of the following and follow the on-screen instructions:

• Wireless connection

In most cases, the software installer automatically

attempts to set up your wireless connection. If setup

is unsuccessful, you may need to enter your network

name (SSID) and password.

• Direct USB connection

Make sure you have a USB cable (not included).

• Wired network connection (WF-2760)

Make sure you have an Ethernet cable (not included).

5 When software installation is complete, restart your

computer.

Mobile printing

Connect wirelessly from your smartphone, tablet, or computer.

Print documents and photos from across the room or around

the world:

• Print directly from your iPhone, iPad, or iPod touch. Simply

connect your printer and device to the same network and

tap the action icon to print.

• Use Epson Print Enabler (free from Google Play™) with

Android™ devices (v4.4 or later). Then connect your printer

and device to the same network and tap the menu icon to

print.

• Print remotely with Epson Connect™ and Google Cloud

Print™. See your online User’s Guide for instructions or

learn more at www.epsonconnect.com.

Any problems?

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).

• Restart your router (turn it off and then on), then try to

connect to it again.

• The printer can only connect to a network that supports

2.4 GHz connections. If your router offers both 2.4 GHz and

5 GHz connections, make sure 2.4 GHz is enabled.

• If you see a firewall alert message, click Unblock or Allow

to let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. Be sure to enter your password in the correct

case.

WF-2750: Press a button on the keypad repeatedly to scroll

through characters (ABC, abc, or 123).

WF-2760: Press to enter uppercase letters or press 123#

to enter numbers or symbols.

There are lines or incorrect colors in my printouts.

Run a nozzle check to see if any of the print head nozzles are

clogged. Then clean the print head, if necessary. See the online

User’s Guide for more information.

Need paper and ink?

Try Epson specialty papers with DURABrite®

Ultra Ink for professional results. You can

purchase them at www.epson.com/ink3 (U.S.

sales) or www.epson.ca (Canadian sales). You

can also purchase supplies from an Epson

authorized reseller. Call 800-GO-EPSON

(800-463-7766).

WF-2750/WF-2760 replacement ink cartridges

Color Standard-capacity High-capacity

Black 220 220XL

Cyan 220 220XL

Magenta 220 220XL

Yellow 220 220XL

EPSON and DURABrite are registered trademarks, Epson Connect is a trademark, and

EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Designed for

Excellence is a trademark of Epson America, Inc.

Mac, OS X, iPhone, iPad, and iPod touch are trademarks of Apple Inc., registered in the U.S.

and other countries.

Android, Google Cloud Print, Chromebook, and Google Play are trademarks of Google Inc.

General Notice: Other product names used herein are for identification purposes only and may

be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

©2016 Epson America, Inc., 2/16 CPD-51340

Printed in XXXXXX

5 Connect the fax line

1 Connect a phone cord to a telephone wall jack and to the

LINE port on your product. See the online User’s Guide

for more information.

2 WF-2750: Press to set up the fax, or press to set it

up later.

WF-2760: Press Start to set up the fax, or press Close to

set it up later.

6 Install software

Note: If your computer does not have a CD/DVD drive or you

are using a Mac, an Internet connection is required to obtain the

product software. To print from a Chromebook™, go to

www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp

(Canada) for instructions.

1 Make sure the product is NOT CONNECTED to your

computer.

Windows®: If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable.

2 Insert the product CD or download and run your product’s

software package:

WF-2750:

www.epson.com/support/wf2750downloads (U.S.)

www.epson.ca/support/wf2750downloads (Canada)

WF-2760:

www.epson.com/support/wf2760downloads (U.S.)

www.epson.ca/support/wf2760downloads (Canada)

3 Follow the instructions on the screen to run the setup

program.

OS X: Make sure you install Software Updater to receive

firmware and software updates for your product.

The printer’s screen is dark.

Make sure your product is turned on, and press any button to

wake it from sleep mode.

Setup is unable to find my printer after connecting it

with a USB cable.

Make sure your product is securely connected as shown:

Any questions?

Quick Guide

Basic information and troubleshooting.

User’s Guide

Windows: Click the icon on your desktop or Apps screen to

access the online User’s Guide.

OS X: Click the icon in Applications/Epson Software/Guide

to access the online User’s Guide.

If you don’t have a User’s Guide icon, go to the Epson website,

as described below.

Technical support

www.epson.com/support (U.S.) or www.epson.ca/support

(Canada)

(562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm,

Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific

Time, Saturday. Days and hours of support are subject to

change without notice. Toll or long distance charges may apply.

Recycling

Epson offers a recycling program for end of life hardware and

ink cartridges. Please go to www.epson.com/recycle for

information on how to return your products for proper disposal.

4131631 Rev.0

1-B PMS376U

4131631 Rev.0

1-B K